interface of Minesweeper (ver 6, build 6001) on Vista

Similar Questions

• Windows Vista (TM) Build 6001 this copy of Windows is not genuine

  I tried to connect to the internet, the screen went black and when she came back on everything on the screen has been expanded. Then, I changed my laptop, using the power button. When I switched back on it the "Windows Vista (TM) Build 6001 this copy of Windows is not genuine" message appeared in the lower right corner of the screen, and all the icons on the desktop had been rearranged - with a few missing. I no longer seem to have the suite Microsoft Office applications on my laptop and I can't connect to the internet. Several other tools on Vista work is more (including the 'Research' in the Start Menu tool). Please note that I had my laptop for about 18 months and it came pre-installed with a 'Real' copy of Vista Home Premium Operating System, I had no problem with the operating system before this appearance. After reading other threads on the forum, I have downloaded and run the 'real diagnostic tool' recommended. I got the following results: -.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89578-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6001.2.00010300.1.0.003
  ID: {C8D03B04-B67C-44CF-A45A-4BAAC3D8831D} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6001.vistasp1_gdr.100608 - 0458
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Status of office: 101 non-active
  Microsoft Office Home and Student 2007-101 non-active
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_672A8F41-93-8007000d_E5ECEA81-80-8007000d_B4D0AA8B-967-8007000d

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {C8D03B04-B67C-44CF-A45A-4BAAC3D8831D}1.9.0027.06.0.6001.2.00010300.1.0.003x 32*-*-*-*-6CJ9789578-OEM-7332157-002112S-1-5-21-3304335253-2120466724-4063863318Acer Aspire 5338 Phoenix Technologies LTD.V1.06 20090414000000.000000 + 00008090409GMT Standard Time(GMT+00:00)03ACRSYSACRPRDCT101101Microsoft Office home and Student 200712215E24EACC08F348DmXIiXqF0f/HL1Vcc/a8P1Bv5I =81602-922-0455851-68810 1

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6001.18000
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500211-02-2057-6001.0000-2682009
  Installation ID: 172751790041123173271805103796828780560014564711825200
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Reason for the notification: 0xC004F032.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current Hash HWID: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgWY16BEsf6Qq4mZBPy9GxHwm + Gx6xWRso =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  "Josh2000" wrote in message News: d485bd51-3d2c-46c 8-8af2-790626dac388...

  I tried to connect to the internet, the screen went black and when she came back on everything on the screen has been expanded. Then, I changed my laptop, using the power button. When I switched back on it the "Windows Vista (TM) Build 6001 this copy of Windows is not genuine" message appeared in the lower right corner of the screen, and all the icons on the desktop had been rearranged - with a few missing. I no longer seem to have the suite Microsoft Office applications on my laptop and I can't connect to the internet. Several other tools on Vista work is more (including the 'Research' in the Start Menu tool). Please note that I had my laptop for about 18 months and it came pre-installed with a 'Real' copy of Vista Home Premium Operating System, I had no problem with the operating system before this appearance. After reading other threads on the forum, I have downloaded and run the 'real diagnostic tool' recommended. I got the following results: -.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50

  
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89578-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6001.2.00010300.1.0.003

  License data-->
  The software licensing service version: 6.0.6001.18000
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Partial product key: 6CJ97
  License status: Notification
  Reason for the notification: 0xC004F032.

  SSDT BrtRef DD01BRT

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 931573
  can help
   
  Also - you must install Service Pack 2 as soon as possible and the subsequent updates.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Flex Builder 3 on Vista Home Premium 64-bit

  Did anyone tried Flex Builder 3 on Vista Home Premium 64-bit? It work? I see that Vista is supported, but the requested page is not specifically Flex Builder on Vista 64-bit.

  I see some old questions on the topic in the forums, but nothing recent and no answers complete.

  other Vista/FB users I've talked to feel the same

  Well, it's always easy...

  I talked to FB/Vista 1 million users, and all say that it is super fast...

  See how easy it is?

  I suggest you look into the optimization of your system and/or look at what could be the cause.

  But all I can say is FB3 is of course not slow.

  I'm surprised it works decent for you

  Well, I'm surprised you're surpised

  I have yet to see a MAC better than anything compared to my PC.

• How to view the user interface created using CS Extension Builder in our menu.

  Hello

  I created a user interface that includes a text box and a button using "CS Extension Builder" and as I - CS5.

  I enter this in the window-> Extension.

  But I want it to appear in my menu.

  so I just want to know how can I do this? Any API does it take?

  Thank you

  What is not clear with the samples, it is that your CSXS Extension can actually choose not to contribute a menu under window > Extensions.

  FreeGrid sample has elements of menu under window > SDK > free grid (who calls in C++ code that fires a CSXS event to open the extension) and the title of the window > Extensions > free UI grid that opens the CSXS Extension, which, in turn, communicates with the C++ plug-ins. If you remove the

  tag in the manifest file of the extension of the free grid UI (under .staged-extension/CSXS), then who's going to get rid of the window > Extensions > free menu item grid UI, leaving only the menu item defined in the C++ plug-ins. Appears not to be supported by Bundle manifest Editor Extension Builder (I'll file a bug on this topic now), but you can manually edit the manifest file (in Extension Builder, you will need to click on the arrow down on the upper right of the package Explorer and select "filters", then uncheck the ".") * resources"box - this will make the folder visible .staged-extensions. Then just navigate to the fichier.staged-extension/CSXS/manifest.xml, right click on it and select "open with > XML Editor".)

  Hope that helps,

  Louis

• Microsoft Windows Build 6001 Service Pack 1 on top of the center of my screen and the TEST MODE on four corners

  After a call to technical support to connect a new printer, I now Microsoft Windows Build 6001Service Pack 1 on the top of my screen. TEST MODE is in the four corners. Technical support HP said it was easy to remove, but would not tell me how without purchase. I have Windows Vista. Can someone please? Thank you

  Type msconfig in the search box and press on enter.

  Make sure that the Normal startup is selected on the general tab and Safe Boot is NOT selected in the Startup tab.

• Windows Live Messenger for XP Ver.2009 Build 14.0.8117.416

  Why is there a slash of red through my icon in Live Messenger as if it is blocked. Block & unblock are not options for myself. I deleted the Live Essentials and re-installed and still have the problem. In addition, I don't know what kind of problems, this could cause, nothing from what I can tell so far, it's all just annoying.

  Thanks in advance, Chris.

  Cygnus_333,

  Unfortunately, Windows Live help forums are currently on a different forum platform. Until Windows Live help forums are moved to the platform of responses, we are not able to move threads Windows Live where they belong.

  I'm terribly sorry for the inconvenience!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Vista R Build 6001 SP1 didn't remain open long enough to correct, even in safe mode and get the blue screen

  Dear community of microsoft

  I don't know what happened to this laptop, it has a bug which prevents running, I don't think it's a virus
  I have here a windows recovery file, it says:
  BlueScreen
  versio OS: 6.0.600.2.1.0.768.2
  local ID: 2057
  more problems:
  BCCode: c1f5
  BCP1: c01a000a
  BCP2: 85a9f000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6001
  prouduct: 768_1

  Hi JTValerie,

  Did you recent hardware or changes to the software of the system?

  Method 1:

  You can try to boot to WinRE (Windows Recovery Environment) of the Windows Vista installation disc and try to perform a startup repair.

  For more information, you can check the link below:

  What are the system recovery options in Windows Vista?

  Method 2:

  If restarting fails, then try to run a disk check.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click restart. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click on command prompt.

  f. at a command prompt, type the following command and press on ENTER.

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. restart the computer and check.

  You can also consult the following KB articles and check.

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

  Hope this information is useful.

• Teredo Tunneling pseudo-interface "could not load driver software error" windows vista business 32-bit

  I found "Teredo Tunneling pseudo-interface" which showed a yellow exclamation in device under network adapter & just below the Realtek PCIe Ethernet controller Manager & the error was that the driver does not work properly. This is why unfortunately I uninstalled the driver. now, who disappeared from the Device Manager & I can't find even after restarting the system.

  so kindly advise me what is the problem if it does not fit in its original location & how to get it in the Device Manager?
  Please find the screen pictures of the error for your reference on skydrive https://skydrive.live.com/#cid=D98B7D8BBADFB4CF&id=D98B7D8BBADFB4CF%21105
  Rgds,

  Hello Asif,

  Thanks for the reply.

  It could be that he was corrupt entry that has been duplicated. Uninstalling the one with the bang yellow doesn't cause problems with job entry.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Web interface and communication series

  I just started reading on the user Web interface. It seems useful, but I could not, how do I connect an application user Web interface with some series/USB instrument, for example. Is it possible to have VISAS screws normals and other toolkits within the user Web interface? Or maybe, it would be possible to develop a stand-alone application using LabVIEW (and all the screw and tool boxes that I am used to), and then import into the user Web interface?

  Thank you

  Marcelo

  That's basically correct - LabVIEW code cannot be imported and you can not directly interface with hardware - and is the only authorized communication with web services (LabVIEW or otherwise).

  So if you have any material you want with the Web Interface Builder interface, you will need to build a web service of LabVIEW that outlined some of the features and then consuming the Builder UI with the functionality of the Web Service to import.

• take the digital output USB-6001 always high or low in c

  Hi all

  I am new to the NI DAQ interface. I have a USB-6001 and I am trying to use this device to control some flowchart in C. What I want to do is:

  * set digital output lines with high and low intensity and change their status as needed (in C).

  I tested the device NEITHER Max--> Test panels and found that the device is capable to do that. Then I try to do in C. I have checked hace examples and function I use is one called "DAQmxWriteDigitalU32". I have problem in the understanding of its input parameters. I tried something with my own knowledge, but it does not work as I expected. Here is a test I did:

  data uInt32 = 1;

  Int32 wrote;

  TaskHandle taskHandle = 0;

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateDOChan (taskHandle, "Dev1/port0/line7", "", DAQmx_Val_ChanForAllLines));
  DAQmxErrChk (DAQmxStartTask (taskHandle));
  DAQmxErrChk (DAQmxWriteDigitalU32(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,));

  taskHandle = 0;
  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateDOChan (taskHandle, "Dev1/port0/$line0", "", DAQmx_Val_ChanForAllLines));
  DAQmxErrChk (DAQmxStartTask (taskHandle));
  DAQmxErrChk (DAQmxWriteDigitalU32(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,));

  I just want to set ' Dev1/port0/line7' and ' Dev1/port0/$line0"at a high level, but only ' Dev1/port0/$line0' answer me. The second parameter of the DAQmxWriteDigitalU32 function is numSampsPerChan. If I replace (currently 1) with a higher value, such as 100, I see that "Dev1/port0/line7" sends a number of 1 output, then back to 0. So I guess that the problem is just that I understand not all parameters for the DAQmxWriteDigitalU32 function. Is someone can you please tell me how I can set up a line of digital output 1 or 0?

  Thank you!

  Hongkun

  Hello

  I finally find a way to do it! The feature works very well, and my problem was not set the data value to write correctly. It seems that if I want to write a 1 to the port0/line1, I put "data = 2 ^ 1" rather than "data = 1", because by default it is the second bit of the port.» Similarly, "data = 2 ^ 7 ' high level to port0/line7. I find that this setting is surprising when you want to control an individual line. It seems more reasonable when you control the whole port. In any case, is to solve the problem!

  Thanks anyway!

  Hongkun

• Any camera regardless of the interface is available for use with the LabView interface.

  Hello

  I intend to go for some CMOS camera,

  but I have a huge doubt before buying, the camera of menttioned above is not anywhere in this list. Nor can I see any type being supported USB device.

  The question is

  1. is a camera regardless of the interface is available for use with the LabView interface?
  2. Can I build a VI to communicate with any device image and recording of camera and take the data?

  Any kind of help or advice is greatly appreciated... I have to buy a CMOS camera and begin to run.

  Thank you...

  Hello Virginia,.

  I am pleased that this information has been useful, one thing I wanted to mention is that USB 3.0 has its own standard USB 3.0 Vision which is currently not supported. If this camera is also Direct Show compatible then you will be able to acquire an image using IMAQdx and manipulate all the attributes that are published to the API Live Show.

  I hope that USB 3.0 Vision will be supported in the near future, and we tentatively announced for this standard of communication for the August 2013 Vision Acquisition Softwareupdate.

  See you soon,.

  -Joel

• Alignment in a graph where build problem

  I would appreciate your help.

  I turn around to try to align a legend of a graph.

  My application is coded in Labview 2014 in Windows 7. Before it was on XP and LabVIEW old and I had no problem.

  I have a user with a graphic interface. I did my good interface look. When I build the interface is not the same in the exe version. I have a copy of what should look like the interface. I also have a copy of the interface in the EXE. In the image of the exe, I circle the part which is not align. Is their way to correct that?

  Thanks in advance!

  I solved my problem with the creation of a control of typedef with my chart. When I first open the control to customize it, I notice that if I try to change something on the chart legend Dungeon are dwindling.  Probably, the size it is in the EXE file. So I tried to adjust size so that the size does not resize itself in the window customize. Then, with the setting of the size, I create the exe and the size has not changed.

  I hope this can help someone else!

  Thanks for your help

  Cynthia

• Windows Vista Home Premium/Windows Movie Maker version 6 build 6002.18005 service pk 2

  An 'unspecified error' window every time I'm ready to tell the project timeline in Movie maker... The window will not close.

  Is there a conflict with the current version of "Windows Live Movie Maker... I don't think so... because the problem existed before the release of Windows Live.

  I liked the movie maker comes with XP VER

  Here are the specs for my Lap Top:

  HP Pavilian DV5
  OS: Windows Vista editions Home Premium
  I.D.:0 1402-297-7332157-00061
  Internet Explorer ver 8.0.6001.188821c
  256-bit

  Windows Movie Maker
  worm 6.0.6002.18005 ser pk 2

  Memory available to windows: 2 880 600 kb

  Can anyone help

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you in the Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to explore 8 version 8.0.6001.18702 on new comp. who has win 7 cuz don't like exploring 8, which came wth win 7.

  I like to explore 8 ver.8.0.6001.18702 that is located on another laptop with the victory. XP I know n like a lot. my new laptop has win 7 n explore 8 but I know not what version I can't find the help button, like on explore 8 wth win xp, so I can click on the option 'about Internet explorer' 2 see the worm this Explorer 8 is nothing like the Explorer 8 on my laptop with win xp. There is no 'file' option so I can send a link or page.which is my main aversion to explore 8 under Windows 7. I am disabled n its very frustrating with this Explorer 8 on win 7. How can I replace it with explore 8 version 8.0.6001.18702. I downloaded n installed on my new COMP with win 7, but when I open the browser it is still the browser that's installed with win 7. Why?

  They should be the same - it just sounds like they have not seen the same day.

  As a first step, to return to the menu with file, etc. save, right-click on an empty area on the toolbar under the address bar and select menu bar. Other toolbars and customization can be made in a similar way.

  Versions of IE8 that you see are different for each version of Windows - an updated to IE8 on Win XP version will have a different version only. for a version to update to IE8 on Win 7. Try to ignore this - it's a diversion.

  Press F1 to get help in IE8. Activation of the bar of Comand using the technique above you will also get help.

  If you need any help more customization IE8 please post back.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• How to program an interface for every 10 minutes

  Hi Experts,
  
  I did with the creation of interface in ODi11g (ver. 11.1.1.6.0) and my database source and target are Oracle 11 g (ver. 11.2.0.3)
  I need to create the schedule for the interface, and it must trigger automatically for every 10 minutes.
  
  It's very urgent...
  
  Please do the needful.
  
  Note: I need to implement even in Windows XP and Linux (OEL 5.8)
  
  Thank you
  Phanikanth

  Hmm. I was just testing it. And it worked very well for me. Here is the screenshot of my setup

  http://dwteam.in/WP-content/uploads/2013/01/Schedule_In_10_Min1.jpg

  Chantal