interface Web Expressway-e (via HTTPS)

Similar Questions

• Error when, with audio streaming via HTTP to the Simulator

  I use JDE 4.7 and 8900 Simulator.  I'm trying to listen to an MP3 via http to a blackberry app.  When you use the BufferedPlayBack example screen, I get the following error when the data source is trying to open the connection - "net.rim.device.cldc.io.dns.DNSException: error trying to solve.

  When I enter the same URL in the BlackBerry browser on the Simulator, I get the following error: "the selected server returned an error when you try to respond to your request.

  When I enter the same URL in my web browser in my PC, I am able to stream audio and play with QuickTime.

  Why I get this DNSException on the BB and not on my local PC?  The web engine runs also locally.  I know that the BB Simulator does not support rstp.  The Simulator also not does support streaming over http?

  This is the URL I used:

  http://myLocalMachine:8080/myMusic/anAudio.MP3;deviceside=true

  Thanks in advance!

  T

  I found a solution to the question in the thread below.  I increased the connection. MaxNumberOfKBytesToSend = 10240 in the... File MDS\config\rimpublic. Property and so was able to sucessfully stream mp3 to my request.

  http://supportforums.BlackBerry.com/T5/Java-development/increase-MDS-CS-limit-on-http-download-size/...

• Phone book access via HTTP/s C60

  Hello world

  I have set up a phonepook through TMS (manual list) and provide this to several endpoints.

  Then I've linked to the HTTPS endpoint, but I do not see the telephone directory.

  is it possible to see the Yearbook of the C series via http?

  Thank you

  Stefan

  The question is in IIS.

  On the TMS server, open IIS and expand the default Web page, then the MST file, and then follow these steps:

  I guess it's an iis 7.5 and Windows 2008 server

  Click the Public folder

  Click on authentication

  Disable Windows authentication

  Disable Basic authentication

  Enable anonymous authentication

  Try to get new directory.,.

  My guess is it does not work for the MXP either because MXP is caching the entires so what you see is updated information in cache...

  / Magnus

• To access the PIX501 via HTTP

  I'm a little confused right now. I'm trying to config PIX501 accessmy & PDM via HTTP, but it's not working. Please see my config below. Thank you!

  6.3 (3) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password >

  passwd >

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  pager lines 24

  debug logging in buffered memory

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside dhcp setroute

  IP address inside 10.29.18.1 255.255.255.248

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 10.29.18.0 255.255.255.248 inside

  PDM 100 debug logging

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group outside-outside interface

  Route inside 10.128.40.0 255.255.255.240 10.29.18.2 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Enable http server

  http 10.29.18.0 255.255.255.248 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  Terminal width 80

  Hello

  Your PIX config has the following:

  Enable http server

  http 10.29.18.0 255.255.255.248 inside

  If you try to access the market SHARE of 10.128.40.0 255.255.255.240 then you must add this to your config as file:

  http 10.128.40.0 255.255.255.240 inside

  Your routing looks correct on the PIX, its delivery to 10.128.40.0 255.255.255.240 by what seems to be your SOHO router, so you should be able to ping the inside interface of the PIX

  If not add "icmp allow no matter what Interior"

  Rgds

  Paddy

• Make the remote web server accessible via VPN Site to website

  We have two test sites that are connected by a tunnel IPSEC VPN site-to-site (hosted on a SAA each site) over the Internet. We are trying to set up an environment to test two web applications running side by side. Two web servers are running on the Site of Test 1. We don't have the same public IP available at each site.

  To address the public site 1 unique IP address restriction, we try to install ACL and NAT rules to have 2 Site accept traffic from the internet and send it on the site to the other tunnel. So 1 Web server would accept the ASA 1 internet traffic and Web Server 2 accept traffic from ASA 2 to the other site. Here's a network diagram:

  

  We have difficulties to get this configuration works correctly. Please note that the network 192.168.3.0/24 clients are able to access the servers Web1 and Web2. This question seems to be due to our NAT configuration. This is the type of error, we see on the two firewalls:

  Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:4.4.4.4/443 dst outside:192.168.1.10/443 refused due to path failure reverse that of NAT

  Our situation seems similar to this post: https://supportforums.cisco.com/thread/2242230

  Any help would be appreciated.

  Hello

  What Karsten said above is true. While it is possible and works, it also means that the configuration is a little more complex to manage. I have done no such features in a real-life network environment and have always used additional public IP addresses on the local site when a server is hosted.

  If you want to continue to move forward with this so here's a few points to consider and the configurations that you need.

  First off it seems to me that the other server will be organized by the local Site 1 so a simple static PAT (Port Forward) must manage the Site 1.

  network of the WEB-HTTP object

  host 192.168.1.10

  NAT (inside, outside) interface static tcp 443 443 service

  And if you need TCP/80 also then you will need

  network of the HTTPS WEB object

  host 192.168.1.10

  NAT (inside, outside) interface static service tcp 80 80

  Now, 2 Site will naturally a little different that the server is hosted on the Site 1 and Site 2 is the public IP address used to publish the server on the external network.

  Essentially, you will need to configure NAT that both makes dynamic PAT for the addresses of the source of the connection to your server Web 2, but also makes the static PAT (Port Forward) for the IP address of the Web Server 2. Additionally, you have to set the area of encryption on the Site 1 and Site 2 to match this new addition to the L2L VPN connection.

  Unless of course you use an existing IP address on the field of encryption in the dynamic translation of PAT for the source address. In this case, it would take no change VPN L2L. I'll use that in the example below.

  The NAT configuration might look like this

  service object WWW

  destination eq 80 tcp service

  service object HTTPS

  destination eq 443 tcp service

  the object SOURCE-PAT-IP network

  host 192.168.3.254

  network of the WEB-SERVER-2-SITE1 object

  host 192.168.1.11

  NAT (outside, outside) 1 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service WWW WWW

  NAT (outdoors, outdoor), 2 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service HTTPS HTTPS

  So, essentially, NAT configurations above should ake 'all' traffic coming from behind 'outside' interface intended to "outside" "interface" IP address and translate the source to ' SOURCE-PAT-IP ' address and untranslate destination to "WEB-SERVER-2-SITE1".

  Make sure that the IP address chosen (in this case 192.168.3.254) is not used on any device. If she is then replace it with something that is not currently used in the network. Otherwise, configure an IP address of some other subnet and include in the L2L VPN configurations on both sites.

  Unless you already have it, you also have this configuration command to activate the traffic to make a U-turn/pin on the ' outside ' of the Site 2 ASA interface

  permit same-security-traffic intra-interface

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni

• Tried everything: 1 address, but not able to connect via HTTPS to the server:

  Hello

  I am trying to connect to the third of the OSB business service web service.

  objective WS is protected with SHA1 base 64 encoded password.

  I am able to connect to the service target of SOAP UI. I am also able to Telnet to my server for dev to the URL of the WS.

  But when connecting from OSB BS I'm tried them all: 1 address, but not able to connect via HTTPS to the server: error.

  Can you please help me solve the problem.

  I tried different policies, but still does not work.

  Kind regards.

  Problem solved. We need to use the proxy server.

• Secure RestFul WebService call with basic authorization via https

  Hello
  
  is it possible to call a secure RestFul WebService with basic authorization via https to APEX?
  
  Database: Oracle 11g XE
  APEX: 4.2.1
  
  I have a solution by calling the Java Web service, which was called from the database via a scheduled task (run).
  
  As my hosting partner does not support Java, I'm looking for another option.
  
  Concerning
  Markus

  Hello

  Oracle XE can USE a wallet with utl_http without problem. Just create a portfolio from a version supporting the creation of the portfolio and copy this portfolio to your XE machine and use it. It really works.

  ---
  Lavenu
  MaxApex accommodation
  http://www.maxapex.com

  Published by: Richard on January 23, 2013 23:32

• Could not load the interface Web VMware Server 2

  Hello

  It seems that there have been a number of users has a problem similar to mine. Unfortunately so far it seems not be an easy fix. A few weeks ago, I downloaded VMware Server 2.0.2 and installed on my Ubuntu 8.04 Server. Surprisingly, it worked very well and I set up a virtual machine via the web interface. It took 3 weeks later I started having problems. Or, when I tried to access the web interface through the browser page just came not upward or it came I have connected, but then was then put on the door.

  Initially, I have done the following but doesn't seem to help.

  -Reboot the system

  -Restart all vmware services

  -Delete all cookies and cache.

  Then I thought that this question had to do with the process of webaccess. It seems that the process was not because for a very short period of time, the connection appeared and I was able to connect. But after a short period of time, it displays an error and then the connection was unreachable again.

  I checked the port 8308 below:

  netstat - LNP | grep: 8308

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 5754/webAccess

  Here is the response from audit ipv6:

  netstat - LNP | grep tcp6

  ping6-c1 localhost

  Unknown host

  I disabled it by changing of ipv6 on off in the etc/modprobe.d/aliases.

  My hosts file resembles the following:

  127.0.0.1 localhost

  127.0.1.1 web web.cinci.rr.com

  The following lines are desirable for the hosts with IPv6 support

  : 1 localhost ip6 ip6-loopback

  FE00::0 ip6-localnet

  FF00::0 ip6-mcastprefix

  FF02::1 ip6-allnodes

  FF02::2 ip6-allrouters

  FF02::3 ip6-allhosts

  I have attached the file proxy.log. I saw a few exceptions so don't know if this has to do with the problem.

  Also, I've included the hostd.log (it's in a zip archive because there are a few files of newspapers spend). I have

  Finally, I checked all the active internet connections and sockets. The results are below:

  Connections Internet active (only servers)

  Name of Proto Recv-Q Send-Q address foreign address State PID/program Local

  TCP 0 0 127.0.0.1:8005 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN 6888/vmware-authdla

  TCP 0 0 0.0.0.0:8009 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:8333 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN 6994/vmware-pass

  TCP 0 0 0.0.0.0:8308 0.0.0.0: * LISTEN 6910/webAccess

  TCP 0 0 0.0.0.0:23 0.0.0.0: * LISTEN 4421/sshd

  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 4917/apache2

  TCP 0 0 0.0.0.0:8222 0.0.0.0: * LISTEN 6994/vmware-pass

  UDP 0 0 0.0.0.0:68 0.0.0.0: * 4393/dhclient3

  brute 0 0 0.0.0.0:1 0.0.0.0: * 7 6634/vmnet-natd(8)

  UNIX domain sockets active (only servers)

  Proto RefCnt flags Type State I-node PID/name path of the program

  UNIX 2 BDRM STREAM LISTEN 16158 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfc-fd

  UNIX 2 BDRM STREAM LISTEN 16165 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/ha-nfcssl-fd

  UNIX 2 BDRM STREAM LISTEN 16167 6994/vmware-pass/var/run/vmware/proxy-Web server

  UNIX 2 BDRM STREAM LISTEN 16189 6994/vmware-pass/var/run/vmware/root_0/1267514173386057_6994/hostd-vmdb-fd

  UNIX 2 BDRM STREAM LISTEN 16191 6994/vmware-pass/var/run/vmware/proxy-mob

  UNIX 2 BDRM STREAM LISTEN 15714 6634/vmnet-natd(8) /var/run/vmnat.6634

  UNIX 2 BDRM STREAM LISTEN 11895 4940/python /var/run/fail2ban/fail2ban.sock

  Finally, just to try to "start over". I removed VMware Server system and reinstalled. Since the virtual machine is in a separate Directory I thought I had nothing to lose. Removal and resettlement seem to succeed. After a reboot and an attempt to access the interface web it STILL didn't work. I'm really at a loss right now. Any help would be much appreciated.

  Thank you

  Aaron

  Hello

  Welcome to

  Don't forget to give my answer. It is the way to give users of vmware communities who helps others.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• How to prevent the FF loading all Web sites using the HTTPS protocol

  FF is trying to load initially all Web sites using the HTTPS protocol, including of mozilla.org. Then I get the error of no reliable connection of course. Mozilla .org is the "invalid security certificate" and "the issuer of the certificate is unknown." I tried to delete the file cert8.db as suggested elsewhere but that did not help. If there is an option for this somewhere, I can't find it. I have the latest version of FF and Win7 running. Thanks for the help.

  There must be some sites that are still using a secure connection, as http://www.amazon.com/. If even a link to Amazon is redirected, you can check if you have an extension like HTTPS Everywhere.

  For Mozilla sites, Yes, you establish a secure connection.

  But you shouldn't get certificate errors! When you get this for virtually all secure sites, the problem is usually as follows:

  (1) error of date, time, or time zone who throw checks validity of the certificates of your system. Sometimes allowing to use a timesource on the internet, the computers can introduce this problem.

  (2) not be set up to work with your security software that intercepts and filter secure connections from Firefox. Products with this feature include Avast, BitDefender, ESET, Kaspersky; AVG has a shield search function which can cause this error on search sites.

  (3) malicious software on your system for the interception of secure connections.

  So... who is?

  If you have any of these specific security products, which would be the first thing to check. We might be able to help with specific next steps based on what you have if you tell us.

  Alternatively, you can examine the certificate to which Firefox is opposed to see if the issuer information pointing to the culprit. Take for example my test page:

  https://jeffersonscher.com/RES/jstest.php

  You should see a section "I understand the risks" in the page. If you expand this section, you will find a button Add Exception. You don't need to complete the process of adding an exception (I suggest not adding one until we know that it is not a problem of malware), but you can use the dialog box to display the information that makes Firefox suspicious.

  Click Add an Exception, and then view. If the view is not enabled, try first the button get certificate. Then in the certificate Viewer, refer to the section "issued by". What do you find here, or under the hierarchy of certificates? I have attached a screenshot for comparison of screen.

• Time increasing while sending data via http repeatedly on the storm

  Hi all!

  My application sends data (in general, this is a picture of ~ 1200 Kb) to the server via http.

  The data are sent ok, but the when I send data several times (without leaving the application) the time devoted to writing the data in the outputStream develops. On first use, it takes usually ~ 50 seconds, the second seconds of ~ 70, the third seconds from ~ 100... I see this problem only on the storm, others (Curve 8900, Bold, Tour) are OK. The url is used on Storm is: http://xxxxxxxxxxxxx.com/mobile/mobile.asmx;deviceside=true

  Here is the code snippet:

  private static WSResponse send(byte[] xmlBytes, WSResponseParser parser) throws Exception {
  
          HttpConnection connection = null;
      OutputStream outputStream = null;
  
         try {
              connection = (HttpConnection)Connector.open(WifiChecker.getURL(URL), Connector.READ_WRITE, true);
  
              connection.setRequestMethod(HttpConnection.POST);
              connection.setRequestProperty("Content-Type", CONTENT_TYPE);
              connection.setRequestProperty("Content-Length", String.valueOf(xmlBytes.length));
  
              outputStream = connection.openOutputStream();
  
              int offset = 0;
              int chunk = DATA_CHUNK_SIZE; // 1024
              int len = xmlBytes.length;
              while (offset < len) {
                  if (offset + chunk >= len) { // avoiding OutOfBounds Exception
                      chunk = len - offset;
                  }
                  outputStream.write(xmlBytes, offset, chunk);
                  offset += chunk;
              }
  
              xmlBytes = null;
  
              String response = getResponseAsSting(connection);
  
              WSResponse wsResponse = null;
              try {
                  wsResponse = parser.getWSResponse(response);
              } catch (Exception e) {
                  throw ApplicationException.invalidWsResponse();
           }
  
              if (!wsResponse.isSuccess()) {
                  throw new WSFailureException(wsResponse);
              }
  
              return wsResponse;
  
          } finally {
              IOUtils.safelyCloseStream(outputStream);
              IOUtils.safelyCloseStream(connection);
              if (xmlBytes != null) {
                  xmlBytes = null; // notify VM it can safely free the RAM
              }
          }
  

  I thought it may be a memory problem, so I manually cancel xmlBytes, but which does not solve the problem.

  Any ideas?

  Thanks in advance,

  Arhimed

  P. S.

  There is no question about Simulator, only on a real device of the storm.

  MSohm, thanks for your response.

  Fortunately, I have just fixed the problem. The problem was not in the code above, but in the code that made the xmlBytes. I converted bytes of the image base64 and looks like I did it dangerously on the use of the memory.

  Thanks again for your attention to this thread!

• Insert data to tabe in interface web oracle

  Hello.
  I created and inserted the data from my database using SQL more.
  all tables created sucsefully and I can see them YES.
  but all rows in tables shown empety (this means under the lines, the column is empety not 0).
  
  now how to check the data that I inserted in the tables? I can see them in YES? (web interface)

  is not anyway to see the data in the web interface (web console in EM)?

  Don't know what your problem is... in EM you choose schema tab, in "Data objects" you select Tables, and then select a schema, and you can see the list of tables: you choose a table and in Actions, you choose 'view data '. It does not work?

• sign the document with 'Draw my signature' and send it via http-post

  Hello

  I have a pdf document with a signature field. When im opening with AcrobatReader XI, I can sign / Place Signature / draw my signature. I can't 'save a copy '. It works pretty well.

  Now, I place a button in the pdf document to be sent via http post to a given address. When I now open this PDF in the XI AcrobatReader, trying to sign. I can only do this with sign / Place Signature / use a certificate. But there is no way to "draw my signature."

  Did I miss an option to do this? Pls tell me if he has a chance to sign the document with 'Draw my signature' and send it via http-post.

  Or is this part of the concept? When I'm looking for a solution, I found EchoSign electronic signature.

  What is available depends on how the as is put in place. If you include a button with an action of type 'Submit form' and/or reader - enable the form, then e-signature (signature of drawing) will not be available in the player. If the document is compatible player then digitally signing will. So for what you want, do not Reader-enable the document and you can use the submitForm JavaScript method to submit. The site that has the JavaScript documentation was not available at the time I wrote this, but post again if you need help with that.

• The administration server is not reachable from the node target via HTTP (S)

  Hi all
  
  I tried add Host in Oracle 12 c. I previously added Linux host OS, but I couldn't add OS AIX in 12 c. I did the auto update for Agent of AIX. You can find my OS and DB info on below.
  
  Server Oracle 12 c - OS is SunOS 5.10
  Client host Oracle 11.2.0.1.0 - OS is AIX
  
  During the installation, I got this error message "the administration server is not reachable from the node target via HTTP (S). In topology, we do not use any firewall... As I said I've added Linux and SunOS but AIX does not...
  
  How can I solve that?
  
  B.R

  You already mentioned the metalink note? Otherwise please see note

  EM 12: Agent deployment fails with error "the administration server can be reached from the node target via HTTP (S)" [1393450.1 ID]

  Kind regards
  http://www.oracleracexpert.com
  Remove the grid or the repository targets control agents
  http://www.oracleracexpert.com/2010/06/remove-grid-control-agents-or-targets.html
  Tablespace transportable export and import on the same Endian platforms
  http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html

• Send a PDF form via HTTP Post: Newbie Questions

  Hello

  I am completely new to PDF forms, so I was finding the documentation and the overwhelming options.

  I'm hoping to get directed to the documentation/tutorials/examples that I really need.

  I want to build a 'proof of concept' for my boss.  I would like to include a screen in our webapp Java (JSP & spring) where either a PDF form is incorporated or is accessible via a link.

  I have

  • Standard Adobe Acrobat Distiller X license
  • Adobe Acrobat X Standard
  • Microsoft Office 2010

  I made a little, the form of Microsoft Word 3 field.  I then he converted via distill into a PDF form.

  I then found this document on how to submit a PDF form to a component side Server:

  http://acrobatusers.com/tutorials/form-submit-e-mail-Demystified

  My big problem with this document, is not an example, nor an example of what is happening in an HTML page complete.   Because I I have a few questions:

  1. I see such an example somewhere?
  2. The result of the call to the javascript function doc. SubmitForm (urlToMyServerSideComponent) go in a script tag on the HTML page as other javascripts?
  3. Can I submit the function from an HTML button run or I put a button 'send' the PDF form?
  4. Do I need Adobe LiveCycle to create a PDF form with a button "submit"?  Free versions?
  5. Can I send via HTTP POST?
  6. Do I need Adobe LiveCycle to create a PDF form with a digital signature?
  7. Is there a document/tutorial that fits where I want to? (Please no books, I am tyring to show to my boss that this is something which can be done in a reasonable amount of time, no time to get and go through a book).

  Thanks in advance for things which make me pointed in the right direction

  Steve

  This seems to imply that I can do a such acroform without using an application or can I use an application with an option to write code by hand.  Am I wrong?  If yes could tell me on the document from the beginner to learn how to do this?    I have acrobat, but I don't have the 'send to server' option in the menu to distribute.

  No, you would use Acrobat to add the button and configure. As said earier, you want not to use distribute the form for this type of shape. Simply add a button on one of the pages of the PDF and give a mouse action upward to "submit a form":

  

  The video tutorial contains more information on the treatment of the submission on the server. Again, do not use the option to distribute the form in Acrobat.

• registration via http page

  Hello

  I created a user registration page and the login page, which is accessible via http.

  On each page, the browser gets the pages where is a form, the form is published on the same page for validation prior to be entered in the database.

  Sensitive information only in the forms is the password that is encrypted after the form is displayed and before being added to the database.

  This method I use is safe? as immune to the attacks? or do I need to use HTTPS?

  Any advice would be much appreciated.

  Thank you in advance.

  What protects you against attacks is not the choice of http or https, but security measures your validation. If you filter the HTML tags and scripts, verify that user input to corresponding to your criteria, and if be escaped from the values inserted in the database, you should be OK.

  The value of the use of https is that others cannot spy on data sent to the server. But if your validation and SQL injection prevention measures are insufficient, using https is meaningless.