registration via http page

Similar Questions

• Phone book access via HTTP/s C60

  Hello world

  I have set up a phonepook through TMS (manual list) and provide this to several endpoints.

  Then I've linked to the HTTPS endpoint, but I do not see the telephone directory.

  is it possible to see the Yearbook of the C series via http?

  Thank you

  Stefan

  The question is in IIS.

  On the TMS server, open IIS and expand the default Web page, then the MST file, and then follow these steps:

  I guess it's an iis 7.5 and Windows 2008 server

  Click the Public folder

  Click on authentication

  Disable Windows authentication

  Disable Basic authentication

  Enable anonymous authentication

  Try to get new directory.,.

  My guess is it does not work for the MXP either because MXP is caching the entires so what you see is updated information in cache...

  / Magnus

• To access the PIX501 via HTTP

  I'm a little confused right now. I'm trying to config PIX501 accessmy & PDM via HTTP, but it's not working. Please see my config below. Thank you!

  6.3 (3) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password >

  passwd >

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  pager lines 24

  debug logging in buffered memory

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside dhcp setroute

  IP address inside 10.29.18.1 255.255.255.248

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 10.29.18.0 255.255.255.248 inside

  PDM 100 debug logging

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group outside-outside interface

  Route inside 10.128.40.0 255.255.255.240 10.29.18.2 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Enable http server

  http 10.29.18.0 255.255.255.248 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  Terminal width 80

  Hello

  Your PIX config has the following:

  Enable http server

  http 10.29.18.0 255.255.255.248 inside

  If you try to access the market SHARE of 10.128.40.0 255.255.255.240 then you must add this to your config as file:

  http 10.128.40.0 255.255.255.240 inside

  Your routing looks correct on the PIX, its delivery to 10.128.40.0 255.255.255.240 by what seems to be your SOHO router, so you should be able to ping the inside interface of the PIX

  If not add "icmp allow no matter what Interior"

  Rgds

  Paddy

• Send a PDF form via HTTP Post: Newbie Questions

  Hello

  I am completely new to PDF forms, so I was finding the documentation and the overwhelming options.

  I'm hoping to get directed to the documentation/tutorials/examples that I really need.

  I want to build a 'proof of concept' for my boss.  I would like to include a screen in our webapp Java (JSP & spring) where either a PDF form is incorporated or is accessible via a link.

  I have

  • Standard Adobe Acrobat Distiller X license
  • Adobe Acrobat X Standard
  • Microsoft Office 2010

  I made a little, the form of Microsoft Word 3 field.  I then he converted via distill into a PDF form.

  I then found this document on how to submit a PDF form to a component side Server:

  http://acrobatusers.com/tutorials/form-submit-e-mail-Demystified

  My big problem with this document, is not an example, nor an example of what is happening in an HTML page complete.   Because I I have a few questions:

  1. I see such an example somewhere?
  2. The result of the call to the javascript function doc. SubmitForm (urlToMyServerSideComponent) go in a script tag on the HTML page as other javascripts?
  3. Can I submit the function from an HTML button run or I put a button 'send' the PDF form?
  4. Do I need Adobe LiveCycle to create a PDF form with a button "submit"?  Free versions?
  5. Can I send via HTTP POST?
  6. Do I need Adobe LiveCycle to create a PDF form with a digital signature?
  7. Is there a document/tutorial that fits where I want to? (Please no books, I am tyring to show to my boss that this is something which can be done in a reasonable amount of time, no time to get and go through a book).

  Thanks in advance for things which make me pointed in the right direction

  Steve

  This seems to imply that I can do a such acroform without using an application or can I use an application with an option to write code by hand.  Am I wrong?  If yes could tell me on the document from the beginner to learn how to do this?    I have acrobat, but I don't have the 'send to server' option in the menu to distribute.

  No, you would use Acrobat to add the button and configure. As said earier, you want not to use distribute the form for this type of shape. Simply add a button on one of the pages of the PDF and give a mouse action upward to "submit a form":

  

  The video tutorial contains more information on the treatment of the submission on the server. Again, do not use the option to distribute the form in Acrobat.

• TOSHIBA AC100 - browser opens all the 'https' pages

  How I can resovle this problem?
  http://youtu.be/-zGS-J4oxBM
  http://youtu.be/vQJyzbAmr3g

  Browser opens all the 'https' pages and I can't add my Google account.

  Time is correct.

  Maybe you should check out the HyperText Transfer Protocol Secure (https) option in the browser settings
  Check if cookies should be accepted.

• I asked a question yesterday via this page; where can I find it?

  I asked a question yesterday via this page but could not find a box click to be notified of responses. Today, I signed in but could not find a link to my question. Maybe I don't know what to look for.

  JEB

  You will find this information in my profile:

  Pick up your answers

  • There is a "Get updates" in the upper right corner of each page of questions that apply to this page.
  • You can click on "my contributions" and "Most recent" sort (updated recently appear first). (You can bookmark the link)

• Add Device sees wireless but printer is plugged and can reach the HTTP page on wire

  I installed my new 8000 Officejet Pro A809 with an ethernet but when I run the Wizard "Add Device" of HP, it trys to install as wireless even though I select wired and the installation fails.

  I can see the page http for the printer and it presents information healthy of mind on my printer, so I think that ethernet is currently working.

  I am running Windows XP with the FW off. The printer is on the same switch as my PC & of course, I can see the http page

  In the wizard, even if I choose ' Wired ' of course the wire works, page "Found network printers" shows that the connection is wireless. None-the-less I click next then a screen appears for "from Network Services" & it rolls well, topology, wireless services, etc., and sending a SLP request the IP address it fails & shows a picture of a wireless signal and a big red X.

  HP Home Network Diagnostic Utility says that software to connect to the network printer is missing, BUT I ran the wizard completely if a second time, I chose my camera wasn't online and it ended up OK. I ran the UPDATE of the utility & he did an update to security; I have rand again and he found none.

  Although my FW is off, I checked the ports that the FW Guide are necessary:

  I can telenet to the printer on port 9100 & 92200

  I can not telnet on port 137 139 or 427

  Ideas?
  Thank you!

  Larry Holt

  OK, plug the printer Ethernet cable must turn off wireless radio printer, but in the cases where it does not, click the button to light blue (or go to settings > network > turn off wireless on the front panel).

  Now, you don't have to bother with the add devices Wizard, we will just add it manually:

  Verify that you can access the web page internal to the printer by its IP address.  If you can not, disable firewall for your security system (not the Windows Firewall, it is usually not in the way).

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Error when, with audio streaming via HTTP to the Simulator

  I use JDE 4.7 and 8900 Simulator.  I'm trying to listen to an MP3 via http to a blackberry app.  When you use the BufferedPlayBack example screen, I get the following error when the data source is trying to open the connection - "net.rim.device.cldc.io.dns.DNSException: error trying to solve.

  When I enter the same URL in the BlackBerry browser on the Simulator, I get the following error: "the selected server returned an error when you try to respond to your request.

  When I enter the same URL in my web browser in my PC, I am able to stream audio and play with QuickTime.

  Why I get this DNSException on the BB and not on my local PC?  The web engine runs also locally.  I know that the BB Simulator does not support rstp.  The Simulator also not does support streaming over http?

  This is the URL I used:

  http://myLocalMachine:8080/myMusic/anAudio.MP3;deviceside=true

  Thanks in advance!

  T

  I found a solution to the question in the thread below.  I increased the connection. MaxNumberOfKBytesToSend = 10240 in the... File MDS\config\rimpublic. Property and so was able to sucessfully stream mp3 to my request.

  http://supportforums.BlackBerry.com/T5/Java-development/increase-MDS-CS-limit-on-http-download-size/...

• Time increasing while sending data via http repeatedly on the storm

  Hi all!

  My application sends data (in general, this is a picture of ~ 1200 Kb) to the server via http.

  The data are sent ok, but the when I send data several times (without leaving the application) the time devoted to writing the data in the outputStream develops. On first use, it takes usually ~ 50 seconds, the second seconds of ~ 70, the third seconds from ~ 100... I see this problem only on the storm, others (Curve 8900, Bold, Tour) are OK. The url is used on Storm is: http://xxxxxxxxxxxxx.com/mobile/mobile.asmx;deviceside=true

  Here is the code snippet:

  private static WSResponse send(byte[] xmlBytes, WSResponseParser parser) throws Exception {
  
          HttpConnection connection = null;
      OutputStream outputStream = null;
  
         try {
              connection = (HttpConnection)Connector.open(WifiChecker.getURL(URL), Connector.READ_WRITE, true);
  
              connection.setRequestMethod(HttpConnection.POST);
              connection.setRequestProperty("Content-Type", CONTENT_TYPE);
              connection.setRequestProperty("Content-Length", String.valueOf(xmlBytes.length));
  
              outputStream = connection.openOutputStream();
  
              int offset = 0;
              int chunk = DATA_CHUNK_SIZE; // 1024
              int len = xmlBytes.length;
              while (offset < len) {
                  if (offset + chunk >= len) { // avoiding OutOfBounds Exception
                      chunk = len - offset;
                  }
                  outputStream.write(xmlBytes, offset, chunk);
                  offset += chunk;
              }
  
              xmlBytes = null;
  
              String response = getResponseAsSting(connection);
  
              WSResponse wsResponse = null;
              try {
                  wsResponse = parser.getWSResponse(response);
              } catch (Exception e) {
                  throw ApplicationException.invalidWsResponse();
           }
  
              if (!wsResponse.isSuccess()) {
                  throw new WSFailureException(wsResponse);
              }
  
              return wsResponse;
  
          } finally {
              IOUtils.safelyCloseStream(outputStream);
              IOUtils.safelyCloseStream(connection);
              if (xmlBytes != null) {
                  xmlBytes = null; // notify VM it can safely free the RAM
              }
          }
  

  I thought it may be a memory problem, so I manually cancel xmlBytes, but which does not solve the problem.

  Any ideas?

  Thanks in advance,

  Arhimed

  P. S.

  There is no question about Simulator, only on a real device of the storm.

  MSohm, thanks for your response.

  Fortunately, I have just fixed the problem. The problem was not in the code above, but in the code that made the xmlBytes. I converted bytes of the image base64 and looks like I did it dangerously on the use of the memory.

  Thanks again for your attention to this thread!

• interface Web Expressway-e (via HTTPS)

  Hello

  So I disable Web interface (via HTTPS) thinking that I could access it via http, but not, so now I can't connect, is any way to activate it via ssh or the console.

  Thank you

  Dave

  You can re-enable using SSH, you must restart the highway after you make the change before it takes effect, the command is:

  xConfiguration Mode of Administration HTTPS: on

  Note, of the API orders towards the end of the guides from the admin.

• How to create a secure page. Not a secure area, just a https page to a form?

  How to create a secure page. Not a secure area, just a https page to a form? I can't find a way let me by creating or copying a page in dreamweaver and admin console is only showing the current http pages. I created before secure areas and included secure on my address worldsecure applications, but I just want to have pages on https.

  Make your page then it just a link to your domain secure (found under settings-> fields within the admin site)

  https://yoursite.worldsecuresystems.com/the-page

• Tried everything: 1 address, but not able to connect via HTTPS to the server:

  Hello

  I am trying to connect to the third of the OSB business service web service.

  objective WS is protected with SHA1 base 64 encoded password.

  I am able to connect to the service target of SOAP UI. I am also able to Telnet to my server for dev to the URL of the WS.

  But when connecting from OSB BS I'm tried them all: 1 address, but not able to connect via HTTPS to the server: error.

  Can you please help me solve the problem.

  I tried different policies, but still does not work.

  Kind regards.

  Problem solved. We need to use the proxy server.

• Guarantee accident - adding page via the Pages panel

  Hiya,

  When I try to add a page of my document or organize existing pages - via the Pages panel - InDesign freezes and I end up giving up strength.

  I TS with a specific document for some reason any...

  
  

  Anyone has the same problem?

  Thank you

  The usual order of things is to try to export to .idml, if it does not move pages to a new doc (which is NOT the same as reconstruction), and finally the more draconian measures such as rebuilding.

  To move the pages, make a new file with the same page size, then rename the master page into something that you are not in the original. Open the paragraph Styles Panel and in the flyout menu choose import styles and import all styles of text of the original file (you can get away with just doing [standard paragraph] as the others come with the text, anyway, if they are used).

  In the original doc, open the Pages panel and select all pages, and then in the drop down choose move Pages... and as a destination, choose the new file and before Page 1. After the move, delete the last page of the new file (the old blank page 1). Save under a new name.

• Secure RestFul WebService call with basic authorization via https

  Hello
  
  is it possible to call a secure RestFul WebService with basic authorization via https to APEX?
  
  Database: Oracle 11g XE
  APEX: 4.2.1
  
  I have a solution by calling the Java Web service, which was called from the database via a scheduled task (run).
  
  As my hosting partner does not support Java, I'm looking for another option.
  
  Concerning
  Markus

  Hello

  Oracle XE can USE a wallet with utl_http without problem. Just create a portfolio from a version supporting the creation of the portfolio and copy this portfolio to your XE machine and use it. It really works.

  ---
  Lavenu
  MaxApex accommodation
  http://www.maxapex.com

  Published by: Richard on January 23, 2013 23:32

• sign the document with 'Draw my signature' and send it via http-post

  Hello

  I have a pdf document with a signature field. When im opening with AcrobatReader XI, I can sign / Place Signature / draw my signature. I can't 'save a copy '. It works pretty well.

  Now, I place a button in the pdf document to be sent via http post to a given address. When I now open this PDF in the XI AcrobatReader, trying to sign. I can only do this with sign / Place Signature / use a certificate. But there is no way to "draw my signature."

  Did I miss an option to do this? Pls tell me if he has a chance to sign the document with 'Draw my signature' and send it via http-post.

  Or is this part of the concept? When I'm looking for a solution, I found EchoSign electronic signature.

  What is available depends on how the as is put in place. If you include a button with an action of type 'Submit form' and/or reader - enable the form, then e-signature (signature of drawing) will not be available in the player. If the document is compatible player then digitally signing will. So for what you want, do not Reader-enable the document and you can use the submitForm JavaScript method to submit. The site that has the JavaScript documentation was not available at the time I wrote this, but post again if you need help with that.