Interim works please wait... update...

Similar Questions

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  Try these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your computer or mobile device.

  If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

  If your problem is AirPlaying starting a computer, try turning off bluetooth

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Switch 10 - Please wait while we install an update of the system

  Hello

  Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.

  I must have started the device about 40 times now, but it does every time.

  Windows updates are up-to-date and are therefore all updates from Acer.

  Any ideas on how to stop this happening?

  Thank you

  Cory,

  Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).

  Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.

  Thank you for the support, now my switch behaves as expected.

  See you soon!

  Hubert

• When windows update, the restart may end, it says please wait and won't restart unless I closed it and open it in safe mode, what can I do?

  When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If the problem continues to repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hello

  Check with the support of Sony as their problems, driver updates, other reasons could known BlueTooth
  is not functional or taken in charge.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  =====================================

  If bluetooth is supported on your model that these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 8stuck in please wait after update

  Hello.

  our PC restarted after the installation of updates and is stuck in blue screen 'Please wait '. I looked at the post on the community, but all references to options like the etc SafeMode depend on you being able to open a session. Impossible to find and do not know if we have a code of disc or activation of recovery. Is it possible to get fashionable or the bios startup or they remoeved options useful?

  Hi Ian,

  This problem can occur if the update has not been installed correctly or some system files have been corrupted.

  When you say "Please wait" can you give us the full error you see on the screen?

  To solve this problem we need an installation media to boot to the Windows Recovery Partition, or if your laptop came built-in with Windows 8 it must have a built-in recovery partition.

  Boot from the recovery partition of Windows using the recovery or recovery 8 Windows partition or the installation media.

  Once you're on the Windows recovery options, please restore the system from there.

  Reference:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  * Creation *.

  Make sure you get the computer back to the Normal start once you have completed the troubleshooting steps.

  Make sure that you back up the data on the computer before you continue.

  To learn more about the recovery options to include the following link:

  Overview of Windows Recovery Environment (Windows RE)

  I hope this helps. Please let us know the result.

• VAIO Update: Installation failure: Please wait a few moments, then try again

  Because I installed Windwows 8.1, using VAIO Update to install the software fails.  After that I click on install, the Vaio Update reports 'Failed installation' and "Please wait a while, and then try again."  This problem may or may not be related to Windows 8.1. I have a SVT15115CSX.

  The VAIO Update software tries to install are

  (1) Atheros Wireless LAN Driver Version 10.0.0.260 update

  (2) update driver ExpressCache, Version 1.0.98.0

  (3) Update Version 6.1.8400.28121, Realtek PCIE card reader

  (4) update content manual VAIO Version 1.0.0.10080

  (5) VAIO Control Center update, Version 6.0.20.09270/6.0.19.09270/6.1.12.09270/6.2.11.09270/6.3.6.09270

  VAIO Update also lists Intel SATA Driver Update, version 12.8.0.1016, but said that it must be installed separately.

  How can I update the software with VAIO Update?

  Not too good English, hope you get the idea.

  Launch of VAIO Update app, you will see the list of new software as u said.

  Then comes "left click" on each driver and a browser window opens in a sony support page where you can download the file.

  run the instalation and you will be ok.

• I own CS6 13.0 2013 Mac. has worked 4 Mac update PS months.after has stopped working. I have re installed... but failed. ! Then I even loaded on another Mac. This time a CS PS legal of no use 6.but... The dealer assured aid... but... NO.. ! Help, please.

  ... I own CS6 13.0 2013 Mac. worked 4 Mac update PS months.after has stopped working. I have re installed... but failed. ! Then I even loaded on another Mac. This time a CS PS legal of no use 6.but... The dealer assured aid... but... NO.. ! Please HELP.

  Hello... I m Armani... I bought Adobe PhotoShop CS613.0 on June 5, 2013... the Macintosh Version. It worked well for 4 months... then I updated my Mac. .... He started the real problem...! PS has stopped working after the update... I tried and tried re installed... but... missed...! as I was to deal with a problem of working time... I have loaded the same version of PS on my other I Mac... Since then... I m having a moral PS CS 6... but no use... I spoke with garage... who I bought the beam of CS... He assured me help... but until today... Hummmmmmm... Please guide me... Its so I had wested my money... Please...!

  
  

  Try to disable and uninstall, then use the cleaning tool, then reinstall, then activate...

  Help of activation & deactivation

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• Stuck in "From backup, please wait". Not even the work of history on the Web. What should do?

  As the topic says, last night, I tried to back up my data via FTP, connection tested, all were well. So, I went ahead and started the backup. Now it is stuck at "from backup, please wait... "since yesterday, Ditto for the application on the Web, when I try to log in it works fine until I'm connected, then the backup window appears and says the same thing. At the moment I can't access my data, change anything, or do anything at all besides. Anyone has a solution or advice for this problem? Google did not help at all.

  
  Sincerely

  Kim

  Hi Kim,

  Please send us your story email DL-AdobeStory-supportadobecom ID

  We will look into it.

• Computer won't startup, startup repair doesn't work & stuck in loading programs, safe mode please wait.

  Nothing seems to help.  Need suggestions! Startup Repair seems to just repeat the bar back for more than an hour, tried safe mode, but no option after I come home... says please wait and hangs on the programs loading...  ANY suggestion is appreciated!  Thank you! Windows Vista

  Hi MARSHAFAYE,

  Remember to make changes before this problem?

  Do you have an error message when you start normally?

  Method 1: Follow the steps described in the section below and then call Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: Run the Windows recovery environment system restore to put the computer to an earlier point in time.  See the front link for steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

• My laptop is stuck at "Please wait" forever.

  After that almost a week of update of windows 8 to 8.1, when I connect my windows pc slain to a "Please wait" in the start menu forever, there is a Cancel option but it does not work, I can't reach the office, or anything like that.  I picked up the phone once but the problem came again!

  I called the team support and solution soved by the following steps:

  1. connect to the affected account
  2. Press the Windows key + L to lock the computer
  3. Switch to a user who has administrator privileges account
  4. Open the Task Manager and switch to the 'Processes' tab (press 'More details' If a process tab does not appear)
  5. find restoreoptin.exe & end task this process
  6. return to the affected account (Start Page, click on your account/image name, click the account that you want to pass to)
  7. Open the menu of charm (windows key + C), select 'Settings', and then change the settings of PC
  8. Select Skydrive
  9. Change the storage file, Camera Roll, and synchronization parameters (not sure which one that does the trick)
  10. logout and log of refund in
  11. you will be asked is no longer with the blank screen 'Please wait '.

• Configuration automatic please wait blinks on the screen every few seconds, why?

  Whenever I start my computer a small window with the text "Auto Config please wait" flashes in the center of the screen every two seconds. This continues for a few minutes. After that he produced intermittently, but each time that it the screen dims and for a few seconds, I am unable to do anything either, no key or mouse fills it. Any suggestions? I scanned and repair errors and defragmented

  Hi YvetteBarnes,

  1. did you of recent changes on the computer?

  2. What is the version of Windows installed on the computer?

  3. What is the number of brand and model of the computer graphics card?

  The error message occurs generally if there is a problem with the monitor adapter or graphics on the computer.

  Method 1

  I suggest that you change the resolution of the screen on the computer and check if the problem persists.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2

  If the previous step fails, then you need to update drivers graphics card on the computer manually by visiting the card manufacturer's Web site and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, then connect another monitor to the computer and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

• Disk Defragmenter error - CHKDSK /F tried many fixes listed in this site & they do not work - please help! Windows XP

  I have the problem of error Disk Defrag as described in many articles on this site and I tried to use your method of repair twice, both times which could not solve the problem.

  I have a "dirty Bit", as shown in the second line, but your other directions does not solve the problem.  Please note that after your direction to type chkdsk c: /f /r ask Y / N question which you note in your direction.  the system won't let you leave without answering the question. I tried both Y & N responses and both failed to solve the problem.

  My problem started with me updating my Itunes program.  I tried to do the update, but for one reason or another that the update would not take, I took all the update prgrams (new) is installed.  That's when all my problems.

  I lost half of my available disk space on my c: drive even if I removed the additional programs, and more I can't defragment my c: drive as I continue to get the chkdsk /f error code.

  I'm running an old Sony Vaio PC with 60 GB of available disk space. Windows XP.

  Any other suggestions?  I searched around on google and there are all kinds of software "for sale" and repairs that do not also work that supposedely will solve the problem.  I don't want to lose money on something that should be an easy fix.

  Help, please!

  We'll walk though...

  You cannot run the defragmentation on a volume where the dirty bit is set - you must clear the dirty (somehow) bit first before running chkdsk.

  Checking the sale but with fsutil is a good idea and you said that your disk is dirty.

  He probably got the dough to a power interruption (in general), aborted restart or an abnormal termination.  None of this happen or familiar?

  When XP starts, it checks to see if any volume is dirty and if any volume is dirty, XP automatically start chkdsk on it because she would like to fix it for you.

  The only thing that can clear the dirty bit is a successful execution of chkdsk/r.

  The following idea:

  chkntfs /x c:

  That puts a bit in the registry that tell XP to not even check the volume dirty bit... never, so if the disc is dirty, the auto chkdsk will not work on the disk since you already told him not to do so and it remains dirty.  Maybe this isn't a good idea unless you plan to undo it someday.  This part seems to be absent from these instructions (how to cancel it).

  If I were you, I would that result than now because it it really in your best interest to leave XP check the volume and try to fix it if the bit of impurity if she set, right?  Why do you want to tell XP not to check your volumes when they could really need to check?

  To cancel this order, enter the following command:

  chkntfs /d (you don't have so specifies a volume).  That sets everything back to the 'normal' and also removes all pending the command chkdsk, you may have said YES to previously.

  Now your volume is still dirty (you can check it again).

  If your chkdsk to run at reboot and it's not clearing the dirty bit, you can see in the Event Viewer Application log to see what happened:

  When chkdsk runs automatically restart, the results appear in the Event Viewer Application log.  You will need to get there after the disk check performed and XP has finished loading for the results and all the problems. If it looks like nothing, look at the report in the event log Viewer Application.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Look in the Application log for a Winlogon event, something as a source (yours may be different):

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:
  Checking file system on C:
  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.
  Windows will now check the disk.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  976751968 KB total disk space.
  31923620 KB in 81911 files.
  24564 Ko 5968 index.
  0 KB in bad sectors.
  188136 KB in use by the system.
  65536 KB occupied by the log file.
  944615648 KB available on disk.

  4 096 bytes in each allocation unit.
  244187992 total allocation on the drive units.
  236153912 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  Sometimes it seems that even if XP running chkdsk for you, the dirty bit still is not cleared for any reason, then simply start it yourself from the XP Recovery Console.

  What I do in cases like yours to run chkdsk/r from the XP Recovery Console you can actually see what happens and watch him run (waiting).   When it's done, you can't question the impurity of the RC bit, but you can run chkdsk/r again until he come clean, and if he can, it clears the dirty bit too.  It does not hurt anything either to run chkdsk/r, even when there is no 'need' to be executed.

  You can get in the RC since an authentic Windows XP installation CD, or you can make a CD of bootable XP Recovery Console if you don't know what kind of CD, you have (no XP media required).

  I'd just a console RC bootable CD, so there is no doubt about what you have for a bootable media.  You can always use it again another day (it might be quite useful).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.