Intermittent display jerky on Satellite Pro C

Similar Questions

• Need to know the model of display driver for Satellite Pro A10

  Hello! I'll try to find the exact display on my satellite pro A10 chipset model. The driver on the toshiba site is not updated, and I can't use the correct resolution (19 "Wide or 1440 x 900) on my external display.
  At the same time before I was able to update the driver correctly, just the search for generic driver "Intel 82852/82855 GM/GME" and software "extreme graphics" at the Intel Web site.
  But now, on the Intel site that they ask the exact model, which means that, if she is 82852 or 82855, and if it is GM or GME...
  Can U give the specific model please?
  My computer is a celeron 2500 MHz with 1 GB RAM and 30 GB HARD drive (standard)

  Thanks in advance...

  I found some details on this device and it seems that the laptop was equipped with the internal graphics controller Intel 852GM; code name: Montara GML

• Win XP Display driver for Satellite Pro P300 PSPCDE requested

  After a fresh install of XP, I can not install a correct display driver (Radeon 5145).
  No driver is available from Toshiba Web site.

  Is there something else I could do?

  Please help - thanks!

  Hello

  To my knowledge, this graphics card is built in other series from Toshiba too.
  Satellite L500 PSLS9E
  Satellite L505 PSLS9E
  Satellite L550 PSLWSE
  Satellite L555 PSLWSE
  Satellite L630 PSK04E
  Satellite L650 PSK1JE
  Satellite L650D PSK1SE

  Satellite Pro L500 PSLSAE
  Satellite Pro L550 PSLWTE

  So try the fort of pilots has published the series listed above.

• Display driver for Satellite Pro 4600 necessary

  My brother has a pretty old Satellite Pro 4600 [model number is PS460E-0C8X7-FR]

  He needs a Win98 SE display driver - the problem is that I can't find his laptop on the pages of downloads model.

  Suggestions very welcome please!

  Thank you

  Hello

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  As product type select ARCHIVE. All that s!

• Need information on display on the Satellite Pro A200-1SS

  Hello, I m about to buy the Satellite Pro A200-SS, but I m interested in what I should expect from its display. Is this enough to play games? What is an answer of this LCD? I also heard that the various types of LCD screens are assembled in this book, is it true?

  If so, please, try to name and describe them - the most important attribute for me is a response and usability for playing games.

  Well, I hope that someone will answer my questions. At latest.

  Hello

  Check this box
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=137018

  Satellite Pro A200 is equipped with a screen 15.4 "screen Toshiba TruBrite WXGA TFT high brightness - internal resolution: 1280 x 800

  It of a really a good laptop screen. Trubrite technology makes very clear photos.
  It is really good to play the game

• Display problem on Satellite Pro L20 - scrambled for 60%

  My screen is scrambled for 60%
  I got a l20 pro of the Satellite with ati graphics card.
  There is a white line in the middle of the screen.
  More high side see my screen saver and the underside is grey.
  Please, who can help?

  MVG BRAM

  Hello

  This problem occurs in the mode Windows safe?
  Use own graphics cards drivers in windows safe mode and if this doesn t matter are present in safe mode so I guess it could be a graphics driver. But if this problem persists in safe mode then it s a hardware malfunction.
  In this case, the only way to solve it is to contact the Toshiba service partner in your country.

• Display problem on Satellite Pro 6100

  My laptop has no display on the LCD screen, but if I connect on external monitor it works fine, which seems to be the problem.

  Hello

  There are not many options. The display is probably defective or maybe the contacts are responsible for this. Sorry, but it must be checked by a technician.

• Display problem on Satellite Pro M40

  When I turn on my laptop, the screen stays dark.
  I have hooked up to an external monitor and you can get a signal that allows me to connect. Once logged into windows xp the laptop screen rises suddenly in life.

  Tried using the Fn + F5 on market, but it does not work.
  Do check the BIOS and settings in power windows and can see nothing obvious.
  Put the laptop to dual screen laptop and CRT, but when I reboot, all I get is a signal through the external display (until I log in to windows), then the screen of the laptop begin to operate.
  No changes to the settings or installed any new software for this development.
  Tried to restore Windows to a checkpoint system well before it started, but not joy.

  Any ideas?

  Hello

  Have you changed the display of the external monitor to a default monitor?

  In this case the display of laptops will not work until the OS is responsible.
  Well, please check in the properties of the graphics card if the internal display of laptops is set as a default view!

  If that doesn't help I would recommend checking if it of possible to start Notepad in safe mode and if the books display can be activated.
  If all the settings of this change, then the installation of the new system would be desirable.

  Good luck

• How to install the display on the satellite Pro 4600 driver?

  I can't find the option to do so. Can someone explain to me on how I can do this?
  I don't see an option so on the control unit of the device.
  What option do?

  Thanks in advance!

  Any help will be greatly appreciated.

  Post edited by: Thierry

  Hello

  The recent display driver more, that you can download from the Toshiba site.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  System adapters - Device Manager - display made control panel right click on the graphics controller driver update or install the driver.
  In this case, the source of the driver is the place of graphic driver download.

  Good luck

  Good bye

• Satellite Pro L300 - 29 c very dark display

  Hello

  The display on my Satellite Pro L300 - 29 c is very, very dark. It's dark, both during POST / in the BIOS and configuration once Windows loads. The brightness of the screen (Fn + F7) is set to the maximum. If I plug in an external display, which works perfectly. I can say that this model is not a physical wheel or something similar that controls the brightness of the screen.

  Should I have a hardware failure? Is this something fixable by the user?

  Thanks in advance.

  I can't say for sure, but I think FL inverter is faulty (backlight) and it should be replaced.
  The FL Inverter control the backlight. It is important that FL Inverter are not too expensive part.
  I take in a Toshiba certified maintainer and ask for help.

• Update on Satellite Pro 2100 display adapter

  Is it possible to upgrade my display on my Satellite Pro 2100 adapter? I currently have NVIDIA GEFORCE4 420 GO to, with the latest version of the driver 4.5.9.1.

  Thank you

  Hello

  Sorry for the question, but you do need to update?
  The graphics of the screen card or the color TFT screen?
  Usually it of not possible to update the graphics card. The graphics on the laptops card resembles a small chip that attaches to the motherboard. It s not the same device on the desktop PC.

  This device was shipped with a color 14.1 TFT "(1024 x 768) screen and a 15.1".
  In this case, it is possible to use this two TFT screens.

  Good bye

• Satellite Pro A300 - need to display driver for OS WIN 2003 R2

  Hello
  the search for display driver for Satellite Pro A300 and the operating system is win 2003 R2.

  pls help me. I'm not able to locate the driver.

  Hello

  As you know computers laptops are not designed to be used as servers and because of this Toshiba does not support Windows Server 2003. Just mobile computing words said enough.
  Am I right about that?

• Satellite Pro 6000 display turns off sometimes

  Hello

  I hope someone can shed some light on a problem with a laptop Toshiba Satellite Pro 6000 that I can't seem to get to the bottom.

  The laptop has Windows XP Professional installed and works fine, except for the fact that intermittently (could be 5 minutes, maybe 90 minutes) the display screen is what I can only describe as 'blocks '.

  The o/s plant (I ran BACK and Tests of diagnosis when the problem occurred) I would say movement of waves of mouse to the screen and activity HARD drive software continues running, except the screen is unreadable with blocks of color scheme.

  Any ideas or suggestions as to what this could be, and how I could go about repairing it?

  Hello

  It's very strange question.
  Have you tried to update the graphics driver? If not then please select this option.

  Besides if the update doesn't fix this eventually it there something wrong with the hardware. In this case, it is not easy to say what could be wrong.
  In your case, I recommend you connect the external monitor if the problem occurs.
  If the color blocks will also appear on the external monitor so eventually the graphics card or motherboard is corrupt.

  But, if the problem occurs only on the internal laptop display, so I would say that there is something wrong with the display or the FL-inverter.
  In this case, you should contact the technicians to solve this problem, because guys have more experience than each common user like me and you.

  Good luck

• Satellite Pro P875 will not display on '3D ready' 3D projector emachines V700

  Hello

  I am struggling with the display of 3D on a 3d ready projector emachines V700.
  I tried different software, stereoscopic player, CyberLink DVDPlayer 12 without success.

  CyberLink DVDPlayer is configured to use the Intel card - which will not limit its possibilities to use the 3D Vision NVidea support?

  On the NVidea Control Panel, the option for the specification of the graphics card is grayed out and configured for the use of the Intel card, for all CyberLink programs.

  The error message I see, is that the software can not enable 3D support. I used the mode "120 time sequential 3D LCD.

  The Toshiba Bue Ray Player has yet identified the Blu Ray in 3D, as it seems.
  It shows 3D blu ray than 2D and 3D button is grayed out.

  I have:
  Toshiba Satellite Pro P875
  HDMI cable
  EMachines V700
  Shutter 3D glasses: Hi Pro shock

  Hello

  From my point of view, you can use this capable 3D projector as part of the nVidia 3D vision.

  http://www.nvidia.co.UK/object/3D-vision-main-UK.html

  As I m not wrong not the display/projector must support 120 Hz and must be set to 120 Hz in order to use the 3D side-by-side mode.

  In addition you need a compatible software/player stereo standard (for example 3D VISION video player)

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.