Display problem on Satellite Pro 6100

Similar Questions

• Display problem on Satellite Pro L20 - scrambled for 60%

  My screen is scrambled for 60%
  I got a l20 pro of the Satellite with ati graphics card.
  There is a white line in the middle of the screen.
  More high side see my screen saver and the underside is grey.
  Please, who can help?

  MVG BRAM

  Hello

  This problem occurs in the mode Windows safe?
  Use own graphics cards drivers in windows safe mode and if this doesn t matter are present in safe mode so I guess it could be a graphics driver. But if this problem persists in safe mode then it s a hardware malfunction.
  In this case, the only way to solve it is to contact the Toshiba service partner in your country.

• Display problem on Satellite Pro M40

  When I turn on my laptop, the screen stays dark.
  I have hooked up to an external monitor and you can get a signal that allows me to connect. Once logged into windows xp the laptop screen rises suddenly in life.

  Tried using the Fn + F5 on market, but it does not work.
  Do check the BIOS and settings in power windows and can see nothing obvious.
  Put the laptop to dual screen laptop and CRT, but when I reboot, all I get is a signal through the external display (until I log in to windows), then the screen of the laptop begin to operate.
  No changes to the settings or installed any new software for this development.
  Tried to restore Windows to a checkpoint system well before it started, but not joy.

  Any ideas?

  Hello

  Have you changed the display of the external monitor to a default monitor?

  In this case the display of laptops will not work until the OS is responsible.
  Well, please check in the properties of the graphics card if the internal display of laptops is set as a default view!

  If that doesn't help I would recommend checking if it of possible to start Notepad in safe mode and if the books display can be activated.
  If all the settings of this change, then the installation of the new system would be desirable.

  Good luck

• [u] [b] Satellite pro 6100 + external projector problems [/ b] [/ u]

  Dear friends,

  I am trying to solve this problem:

  When I connect to the satellite Pro 6100 a 3rd party bCool XG1 DLP projector (a very good) I can see everything fine except DVD.

  I better explain: I can see the movies on the screen of the laptop, but nothing on the wall...

  Notice that I can look at these files directly on the screen, but on the wall...:
  MPEG files (Quick time Yes, but not WinmediaPlayer);
  AVI files (Quick time Yes, but not WinmediaPlayer);
  MOV files (Quick time Yes, but not WinmediaPlayer);

  DVD: (With Intervideo Windvd) Ok on the screen, but no output from the projector.

  Note that if I use the small window mode, the projector output image is correct except inside the window that is displayed in black (but is OK on the screen of the laptop).

  Who can help me?

  Thanks in advance.

  Stefano

  Hi Stefanohf,

  When you pass the output mode you have with keys FN and F5?

  also what settigs are set in the display driver? Right click on desktop, properties and parameters.

  go to advanced and nView. There should be active clone!

  Try this!

  Goodbye, Sam

• Satellite Pro 6100 - problem starting (light flashing Orange)

  On my laptop Satellite Pro 6100, seeing DC IN (first on the left) flashes orange and the laptop does nothing else (no display or sound). The light flashes for 8 times, has a long pause and then starts all over again.

  I tried a different adapter with no joy. It does the same thing if you use only the battery and if you run from the adapter without the battery.

  The only time wherever it shows a different light is when you take the battery out, put back in and hold the power button. Led Slim Select Bay (second right) briefly turns green, but it turns off and the led DC IN resumption of the orange blink.

  It seems likely that it is an internal hardware problem (power supply, motherboard, etc.). Does anyone have any ideas? And as anyone knows anywhere which lists all the different orange light codes for Toshiba laptops?

  Hi André,.

  You are right in thinking that there is a hardware failure (most likely your motherboard). Flashing codes are used by service technicians to indicate the nature of the fault and I have yet to find anywhere who publishes the real meaning of these codes.

  I think it looks like a trip to the nearest Service Agent. :-(

  HTH

• Solution found to the problem of "BAD RTC BATTERY' on Satellite Pro 6100

  Hi, I'm from the Italy.

  I myself have solved this problem without changing the motherboard on my laptop second hand satellite pro 6100.

  for info: [email protected]

  Hello

  may I ask how you solved this? I have the same machine and this error pops up sometimes.

  Welcome them

• Satellite Pro 6100 USB problem after stand-by

  Hey all,.

  I have a Satellite Pro 6100 and when that I start my computer, my USB ports work fine. However, as soon as I wake, I get about 6 pop-up messages stating "USB device" unrecognized and my USB ports do not work.

  Device Manager indicates they work fine, so I'm just confused.

  Any help?

  Thank you!
  -Geoff

  Hi guys

  I'm not sure but I think the BIOS update can fix this. Have you already checked if there is a new update of the BIOS for your unit?

• Satellite Pro 6100 - no idea on I need drivers

  Hello
  Well, I brought a Satallite Pro off ebay a few days back but I can't find what I need.
  I don't have any idea what the laptop except a Satallite Pro 6100 1.7 ghz, 512 MB ram mobile P4 CPU graphics card nividia.

  It would be great if I could know what laptop that I use to download the drivers, or at least be done in which I need only one I'd love to be able to change the brightness of the display by using the fn + F5 key and have the screen filling the LCD.

  Thank you.
  Mike.

  Hello

  I put t really understand your problem

  The European driver from Toshiba site provides all the important and necessary drivers for the Satellite Pro 6100.

  I assume you mean on the XP drivers
  Install all.

  In a first step, I recommend the installation of the common Module Chip Set Utility, display driver and then continue with the rest

  If you have installed SP2 please check the "Microsoft Windows XP SP2 update information" because some tools need to be updated.

  concerning

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• Satellite Pro 6100: screen stays completely white or completely white

  I have a Toshiba Satellite pro 6100 running windows XP with SP2.

  For the last time, when you turn it on, sometimes the screen is totally blank and sometimes she is totally white.

  Must shut down the computer and try to reboot, sometimes several times until the computer starts correctly.

  Could you please tell what it is and how to fix it.

  Your answer will be highly appreciated.
  Thank you.

  Hi, Louis

  I think that we should first find out if the problem is related to the graphics card, for the internal display or on the part of the screen!
  In such cases, it s a good idea to connect the external monitor to the laptop.
  Check if the symptoms appear also on the external monitor.

  If the same thing will happen on the external screen so I guess that the computer laptop s video card is malfunctioning. But if the image appears correctly on the screen then the problem could be linked to the internal LCD display or the small part as FL inverter.

  Check it out

• Satellite Pro 6100: keys Fn does not

  Hello

  Ive got a laptop Satellite Pro 6100. IM of problems using the secondary function keys (I'm not sure what they call them!). When I press the function (Fn) key, the light below the F10 button as it should, but when I press one of the brightness of i.e. F up/down buttons, nothing works!

  I had a quick glance at some of the tool and using keyboard in the Control Panel, which suggests that the driver may be incorrect, so I tried looking for an updated driver, but windows says: I have the latest version of the driver.

  Anyone else have this problem with the SP6100? Can it be fixed? If so, how?

  Any help would be great.

  Thanks - Kavi.

  Post edited by: kavi

  Hello

  Even the windows said that you are using the latest drivers, you need to reinstall the drivers.
  First remove emulator utility Hotkey to display Add & Remove programs.
  Reinstall it modules common Hotkey Utility Emulator for display devices.

  Hope it helps average known us if it works or not

• Satellite Pro 6100 screen compatibility

  Hello!
  Is there a place I can check the compatibility of the screen for my Toshiba SP 6100?
  I have damaged a screen on one of my laptop and I would like to replace it.
  Thank you

  Hello

  The problem is that the Satellite Pro 6100 was delivered with four different views.
  14.1 ' (1024 x 768) color TFT display.
  15.1 ' (1024 x 768) color TFT display.
  15.1 ' (1400 x 1050) TFT color display.
  15.1 ' (1600 x 1200) TFT color display

  I found information that a P000334230 (LTN150X4-L01) screen is compatible with your device.
  http://www.getpartsonline.com/p000334230.html

  But I recommend to ask Toshiba service partner in your country for compatible screens.

• Satellite pro 6100 dvd player

  Hello

  I have a satellite pro 6100, which has been fixed recently because she had the common problem with the power from the motherboard works do not (something like that). He came back from work, but the Bay of slimselect DVD does not read the CD or Audio CD. He's trying to play DVDs, but it says that it requires a decoder which I installed but then said the display resolution is too high, but do what he says does not resolve. Is this a problem with the hardware or software?
  Thank you very much

  Well, it's not easy to tell if it hardware or software's problem.

  But maybe these two steps can help you.

  1. right-click on your drive in my computer and select Properties.
  In the properties is a checkbox to enable digital CD PLAYBACK. Make sure this box is checked.
  2. in "Autoplay" to ensure that a corresponding task is associated with music CD and not 'no action '.

  Then I recommend you to check the settings of the decoder software.

  Good bye

• Function keys do not work on Satellite Pro 6100

  Hello

  I have a Toshiba Satellite Pro 6100 running on Windows XP SP2.
  I had a slight problem with the shortcut keyboard/function keys. When I press the FN + F5 (display output) nothing happens.
  [edit]
  I fixed the wireless FN + F8 combination now. The FN + F5 again will not work. I installed the common modules and wireless hotkey utility
  [/ Edit]
  I installed the shortened program from Toshiba, but that won't help.

  Anyone have a tip or something?

  Greetings

  Post edited by: boinkie

  Hello

  Please install Toshiba Hotkey for 1.00.01.00 - 02 worm. display devices and test the combination of keys FN + F5 again.

• Signal not detected on Satellite Pro 6100 wireless

  I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
  A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

  I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

  His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

  I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
  Suggestions how to trouble shoot and fix this?

  Both machines are XP Pro on them, latest updates.

  Hello

  Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

  Check if the wireless adapter is listed in the Device Manager and recognized correctly.