internal error while loging in windows 7

Similar Questions

• 1. Server error messages generated an exception 2. Internal error 0x800400FF to start Windows.

  Original title: 1. Server error messages generated an exception 2. Internal error 0x800400FF

  Running Win7 on Toshiba P500 SP1. During the installation of Paragon system backup 11, which allows me to designate a backup (z) USB drive, he made a full backup. Then, every time I start up Windows this program does not start with the error above, sometimes only one message and sometimes both. This program (always installed with disc manufacturers) worked fine until my C:/D: main needed to be replaced. Can anyone help?
  I think that maybe a Win7 program is may be damaged.
  zanadu1251

  Hi Zanadu,

  It could be a problem with the backup USB drive that you created by using the Paragon Software.

  I suggest you to contact Paragon as it appears after taking the backup. You can check the link to contact Paragon support team:

  http://www.Paragon-Software.com/support/

  Let us know if you have more queries on Windows.

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• expdp fails with error ORA-39006: internal error written on a windows share

  Hello!
  I need to get the job of following configuration:
  Linux (CentOS 5 32-bit) with Oracle 11.2.0.1.0 Server
  Windows Server 2003 32-bit SP2.
  On the windows server, I created a user called oracle, who is a member of the groups oinstall and dba. (User name of Linux, and group membership is the same).
  After this, I share a directory on D:\data_pump (I gave full control of the directory of the oracle user). I mount the disk windows on my Linux box as follows:
  Mount-t cifs //winserver/data_pump/u04/oradata/data_pump o = oracle user password = "pass", uid = oracle, gid = oinstall
  As the oracle linux user I am able to create and edit files, but:
  I cannot connect to my database, create the directory called DATA_PUMP pointing to my cifs mount point, and after that, I run the following expdp sentence:
  expdp system DIRECTORY = DATA_PUMP DUMPFILE = test4.dmp LOGFILE = test4.log FULL = yes
  
  And I get the following error:
  ORA-39006: internal error
  
  In looking at expdp journal I found the following information:
  ORA-39097: Data Pump job encountered the error unexpected-31643
  ORA-39065: exception unexpected master process in FILE
  ORA-31643: cannot close the dump file ' / u04/oradata/data_pump/gaston4.dmp '.
  ORA-19510: unable to set the size of the blocks of 1 for the file ' / u04/oradata/data_pump/gaston4.dmp ' (block size = 4096)
  ORA-27045: cannot close the file
  Linux error: 5: input/output error
  Additional information: 4
  
  Do you have any suggestions?
  
  Thanks in advance.

  Hi, I see metalink:
  Bug 8313127: EXPORT EXPDP CIFS MOUNT ON WINDOWS FROM LINUX FAILS
  http://KR.forums.Oracle.com/forums/thread.jspa?threadID=923398

• Receive the internal error code 10 on Windows 7

  Hi im on (win 7 64-bit) what to know what it is please I have be getting for a 2 weeks they is no problem I see look like it is ok that I expect to see no more errors in the log events the (event log ID: 36888) no news about this not thx

  _ It's the error im get thx hop get it fix

  The next fatal alert: 10. The internal error state is 10 (ID:36888 event)

  * original title - Hi I need help on getting this fix thx: the next fatal alert: 10. The internal error state is 10 (ID:36888 event) _ *.

  Hi Caudwell,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en/w7performance/thread/6cd8d92f-d47e-4828-B702-2b553b6cf3b2

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error PLS-00801: [phdcsql_print_kge_errors::parm pos] internal error while deploying card OWB

  Any deployment of an existing map of OWB, particularly in an environment (example B), I am facing this error message so that the same code works fine in another environment (say A).

  I tried importing the .mdl to another (A) environment where it works fine, imported in a B environment and attempted to deploy, has always given me same error message all in deployment.

  Help, please.

  Errors of compilation for BODY of PACKAGE *.

  Error: PLS-00801: internal error [phdcsql_print_kge_errors::parm pos]

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY "*" AS

  Error: PL/SQL: statement ignored

  Line: 11

  Text: SELECT

  Error: PLS-00801: internal error [phdcsql_print_kge_errors::parm pos]

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY 'MAP_DMT_CUST_COMPLAINT_UI' AS

  Error: PL/SQL: statement ignored

  Line: 709

  Text: SELECT

  Error: PLS-00801: internal error [phdcsql_print_kge_errors::parm pos]

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY "*" AS

  Error: PL/SQL: statement ignored

  Line: 2332

  Text: MERGE

  Error: ORA-00900: invalid SQL statement

  ORA-00900: invalid SQL statement

  ORA-00900: invalid SQL statement

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY "*" AS

  A table was missed and not imported in the OWB repository from which this table was not related. I imported this table, bounded to the search with the table operator and it worked fine.

  Somehow instead of give the real reason, she gave this vague error.

  I hope that this solution works for others :-)

• An internal error has occurred in Windows Media Player

  I write on behalf of a client who has a few problems with Windows Media Player in Windows XP.

  She said that she receives the error message "an internal application error has occurred" all the time. He will not play CD and does not even start.

  She wonders if she needs to unintall/reinstall. However, she received another message saying something like its other programs may not work correctly.

  Just to confirm yet for her, she would not lose all other programs in the cases where she unisntalls Windows Media Player, right?

  Thank you!

  Thank you.

  Hello

  • What were the changes made before the issue occur?
  • How long have you been faced with this problem?

  You can check this link:

  You may receive an error "internal application error has occurred" message when Windows Media Player will automatically try to read a CD or a DVD in Windows XP

  http://support.Microsoft.com/kb/899873

• Get the 'Message (unacceptable)' error while activating my Windows 7 product key.

  * Original title: product key

  When I want to active my windows 7 it ask me to enter the product key, but I can not enter the number (0) and I have this

  Message (unacceptable character)
  

  I've updated since an activated copy of Windows 7 or Windows 8/8.1, then I decided to reinstall using either the. ISO file, reset the player's PC or recovery, but I am prompted to enter a product key:

  Click on that later

  Windows 10 automatically reactivates in the coming days.

  Things you should know:

  • A Windows 7 or Windows 8/8.1 product key cannot Activate Windows 10. Windows 10 uses its own unique product key.
    
  • By default, the versions of Windows 10 are previously entered, which means, you don't have to enter a product key and should not be invited to enter one as long as you upgraded a activated License of Windows 7 or Windows 8 or 8.1 of Windows or Windows 10 Preview build.
     
  • If you perform a clean installation on the first attempt, you will have to start from an activated installation of Windows 7 or Windows 8/8.1.
    
  • If you are prompted to enter a product key, click on Do this later and give it a few days, 10 Windows will be activated automatically.
    
  • Activation servers may be overwhelmed at the time due to the volume of updates, so give it some time if you get an error of the type ()0XC004E003, 0x8007000D, 0x8007232b or 0x8007007B) 10 Windows will activate eventually as long as you upgrade by using the appropriate method.
    
  • It does not need to know your product key Windows 10, read "Understanding Product Activation in Windows 10:

  Figure 10 Windows Product Activation:

  In previous versions of Windows, when you have installed a version upgrade of Windows, if you want to reinstall the upgrade version, you had first reinstall permissible version where you upgraded, reactivate, then upgrade again and reactivate again.

  With Windows 10, this is no longer the case. Once you have upgraded to Windows 10 and enable, you can simply create a bootable copy on DVD or USB and reinstall all Windows 10 without having to reinstall the release candidate and it automatically reactivates.

  Quote:

  "10 keys Windows handles differently. When you migrate to Windows 10 via Windows Update to 8.1 Windows or Windows 7, the process saves your eligible hardware and OS computer with a Microsoft Product Activation Server. The device is considered as a device Windows 10.

  "Thereafter every time you re-install (or clean install) installation check in with these servers, concludes the unique installation ID and product validation.

  ZigZag3143 (MS - MVP)

  To learn more:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-activate-and-resolve-common-product-key/33f31475-93B3-4D1C-812F-4b21fbd807a7

• Event listeners generate errors while the modal windows are shown.

  Hi all

  I have an interface in ui script that relies on headphones for events initialized as follows:

  		var button = palette.add ('image', rect);
  		button.onDraw = buttonDraw;
  		button.addEventListener ('mouseover', onMouse, false);
  		button.addEventListener (onMouse, 'mouseout/mouseouthandler()', false);
  		button.addEventListener ("mousedown", onMouse, false);
  		button.addEventListener ("mouseup", onMouse, false ");

  I need these events if I change images (false buttons) when the user moves the mouse over them or click on one of them. Everything works as it should, until I decided to give something back. Although made in After Effects, a window or something is open somewhere and it makes all the unnecessary scripts, they do not meet the entry to any user, and it is very good for me. It works the same for all of the scripts that I tested.

  The real problem is with event listeners. The scripts that use will generate them a substantive error if no listener is enabled. And when rendering finished, AE will display a pop-up allowing you to know these errors. Also the interface script stops turning completely until you close open again.

  The error message is:

  "Cannot run a script so that a modal dialog box is waiting for answer".

  I thought to replace all the headphones by the other type of reminder like 'onClick', but it seems that there is no work around to "mouseover" or "mouseout/mouseouthandler()".

  It is a real problem for my user interface, as if the user has my Panel anchored somewhere in the interface and simply move the mouse on one of the buttons, it will end with the error at the end to make it. There are also I can't do anything to avoid the listeners to run, because once the script is loaded, we lose all control of what goes with it, no way to temporarily remove listeners.

  Any ideas on how to solve this problem?

  I found a solution to my problem.

  I had to remove the listenerer of the 'mouseout/mouseouthandler()' event when my custom onDraw function has been executed as a result of the actual mouse out (in other words drawing my picture in the iddle version). Then I just reinstall the event "mouseout/mouseouthandler()" at the "mouseover" event is triggered.

  I also tried to remove the "mouseout/mouseouthandler()" in my function onMouseOut listener, but it did not work very well, the only way was to remove it in the custom onDraw.

  Another thing, I discovered, is that the "mouseout/mouseouthandler()" event is actually fired 2 times... every time! That's probably a bug.

  I'll mark this as answered even if it's more as a workaround that dirty a real difficulty. I think it's a bug in After Effects (at least).

  UQg about your question, do you have a thread for it? Otherwise, you need to create one, I also have this problem and I'll look into it.

• Cannot upgrade to SP3 after a fresh install of XP. Gets the error while accessing the Windows Update page: "the site has encountered a problem and cannot display the page you are trying view."

  Original title: install SP3

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  Just install Windows XP SP3 manually...

  Before do you - make sure you have restored all the way back to Internet Explorer 6 * and * all your drivers for hardware devices are the latest version of each of the web pages by the hardware manufacturer (Microsoft did not your hardware - to be of course checked manually for the most recent driver by visiting the Web pages or the manufacturers yourself and find the latest driver for any model device (s) you have - map) motherboard chipset video, audio, network, etc.)

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• Error while upgrading from windows xp to windows 7. Error DMTVP.

  Original title: DMTVP

  Hi all. my pc crashed during the update from xp to w7. now all I get is dmtvp is compressed at startup?

  any ideas how I can fix this problem? Repair Console won't solve and everything seems to be able to do is to reinstall the os, I did not
  a backup of my files if I'm reluctant to do. any ideas appreciated

  Well there is no upgrade inplace for winxp to win7, it is a clean installation, the best you can hope for is that the installation would have created a windows.old folder.

  If your data is not backed up, at some point, you will lose this data

• An internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 of error in windows 7 Home premium 64-bit OS.

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  You have posted in forum Windows XP hardware and drivers.  You should have posted in forum Windows 7, probably the forumprograms .

  If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?

  Your question is also confusing: you get this error message every time that you do a reboot?

  You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.

• Windows ip configuration is an internal error: the request is not supported

  I cleaned up a few viruses out of a Windows XP Professional computer to a customer, and now he can't go on the internet.  When I check ipconfig, I get the following error.

  Windows IP configuration
  An internal error has occurred: the request is not supported.
  Contact Microsoft technical support for more help.
  additional information: host name of request impossible.
  So I googled some results. Have replaced the TCPIP.sys file with one from another computer, I still get the same message.  I don't have a windows XP original disk to put it into recovery mode.
  I also ran the command "netsh int ip resetlog.txt" but which did not help either.  I saw on another blog.
  The NIC is to see that there is a power cable plugged into it as well.  Help, please!
  Thank you
  Trever

  Hello Trever,

  Follow the methods and check:

  Method 1: You can refer the following Microsoft Knowledge Base article and check.

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Let us know if that helps.

• Internal error Windows 8.1 has occurred when using web access

  I've recently updated mij PC to Windows 8.1.

  When I connect our departure from en Portal Web Access request I get the following error: internal error occurred.

  Details:

  OS: Windows 81. x 64

  Connector version: 8.0.1186 from the fix 271675

  I was wondering if there is a work around for this problem?

  Concerning

  Misha

  Hello

  Not bad at all. I'm happy to get it out to you guys.

  Looks like Michel has just blogged about this too, which means that he is now on our main Web site and can be downloaded on https://support.quest.com/SolutionDetail.aspx?id=SOL115599 where everyone is after him.

  Thank you, Andrew.

• How to fix the error internal 2203. application of c:\windows\installer\1303f6d6. IPI?

  I tried to install activeClient and I get an internal error 2203 everytime and it install or repair the application.

  Snap Shot added...
  "Screenshot".

  Hello

  -Logged as administrator?

  I would suggest trying the following steps and check.

  You must have the permissions for the 'SYSTEM' in 2 files Temp.

  They are:

  C:\Windows\Installer

  AND

  \AppData\Local\Temp C:\Users\

   

  How to add permissions:

  1. a click right Security - Properties -file tab

  2. in the "Group or user name," you should have

  a. your account name

  b. SYSTEM

  3. If the SYSTEM is missing, click on ' Edit...', then ' Add... »

  4 al 'Entered the names of objects to select', 'SYSTEM' key, and then click OK

  5. click on 'SYSTEM' and ' Full Control ' is checked in the permissions window.

  If you find no records you will need to view hidden folders.

  1. click on Start and then click on 'Computer' .
  2. click on organize and then folder and Search Options. In the view tab, check on ' display the drives, folders and hidden files "

   

  If you are still having the same problem, then create a new account and check.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem persists, then contact the software vendor for assistance.