Internet connection sharing everything just works. Problem really very annoying. Help.

Similar Questions

• Internet connection sharing does not work anymore

  I have used Windows Vista Home Premium for 2 years now on my laptop. Internet connection sharing enabled to connect to the internet via my wireless adapter and allowed me to share my internet connection through the ethernet port. He worked for more than a year. All of a sudden 4 months ago Windows Vista doesn't let me share the internet connection more. When I go to networking and sharing Center, click on "Manage network connections" and it shows that my "Wireless Network Connection" is always set to share. So after reading several forums, I clicked on wireless network connections and click right properties. Then I clicked on the sharing tab, to make sure that "Allow other network users to connect through this computer's Internet connection" has been verified and that it is. After that, Windows Vista will not always share the internet. Someone suggested that I double check the IP version 4 and 6 on the wireless and Ethernet connection were defined on IP addresses obtain automatically, and they are. The computer still will not share the internet connection! I even took the manufacturer in the view of portable and made sure my cable modem Simulator wasn't bad. I took it to a computer store and we checked the crossover cable. Everything is fine! What else can I try?

  Obtain an IP address automatically is the wrong setting on the Ethernet connection.  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  DNS server: no
    
  Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• By using internet connection sharing

  I'm having a problem using ICS.  It used to work perfectly, but then I had to reinstall vista and use my restore disks, and it has not worked since.  That's what I'm trying to do.  I'm taking a wireless internet signal coming from my router and it sends through my LAN port for the computer of my son, who does not have a receiver wireless on his computer.  This used to work properly, but don't work no more... That's what I've done so far:

  I turned on ICS on my wireless connection.  I checked all the services I want to be able to have the connection (http, ftp, telnet, etc.).  I turned "detect settings ip automatically' on my son's computer.  I have a crossover cable from my computer to my son (that's what I used before too).  I don't know what happens wrong... someone has any ideas?  Please help :)

  Hello

  Make sure that you are really using a crossover cable and that the side network is up
  and running.

  First step - Ad - Hoc network

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How Set Up Ad-Hoc wireless network in Windows Vista (if you ever want to WiFi)
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista (if you ever want to WiFi)
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  Two step

  ICS Setup

  Using ICS (Internet Connection Sharing)
  http://windowshelp.Microsoft.com/Windows/en-us/help/bfd3bd31-82F0-4B9C-9cde-fb92bc2b14771033.mspx

  ICS step by step
  http://www.windowsreference.com/Windows-Vista/step-by-step-Internet-Connection-Sharing-ICS-Setup-in-Vista/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Why my internet connection sharing with my xbox 360 does not?

  my internet connection sharing use to work with my Xbox, but all of a sudden, it stops working, I then went on another computer which had xp (my other had 7) and it worked for a little started but still spoil later. I have another computer with xp and won't work at all with it. I think that I put everything in the right seat, and when I plug my 360 into my router it works but I want to be able to play in other rooms. I also tried to fill the connection on all 3 computers and it never worked.

  Hello

  See the following article:

  Use your computer to connect your Xbox 360 console to Xbox LIVE

  See also:

  Xbox 360 support

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Bluetooth network and Internet connection sharing problem

  I am putting in place a network via Bluetooth between two computers later with Toshiba Stack installed and to share the Internet connection with the second computer.

  On the computer of trees I put Internet connection sharing, and for this reason, it automatically assigns addresses TCP/IP for the Bluetooth Personal Area network (192.168.0.1).
  On computer 2, I put everything to get it automatically. Firewall (Kaspersky) disabled.

  When I connect 2 Bluetooth devices, everything looks fine, the 2nd automatically gets the IP address, I can ping both computers and Internet works also on the 2nd computer, for a few seconds! After that, it appears as the 2nd computer is disconnected from the network... what could be the problem?

  In the case of the observer under the System tab, I found information like these:
  2nd comp:
  The system has detected that the network \DEVICE\TCPIP_{E44D18EB-91F5-4 adapter has been connected to the network and launched a normal operation via the network card.

  The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.

  and the 1st model also appears this:
  The system has detected that the network Bluetooth adapter... Area Network - Packet Scheduler Miniport has been disconnected from the network, and the network adapter configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

  In your case, I would look at the following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists the following document:
  "Internet on PDA via PAN using Notepad as a gateway."
  In your case, the PDA is another laptop, but the procedure should be very similar.
  I would check the firewall settings later if it still does not work.

• Problem with Vista and XP computers Internet connection sharing.

  I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.

  Thank you

  Oscar

  It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration.  Here are two ways to make it work:

  • Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700.  To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS.  The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.

  or:

  • Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700.  Both computers should be able to ping each other.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Can someone help me with my problem on the Internet connection sharing?

  I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

  I am currently using windows 7. I hope some of you can help me thanks.

  

  It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

  Hello Fritz,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Additional information:
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Cannot access internet when you configure with internet connection sharing.

  INTERNET HELP?

  I tried to use the internet connection to my wireless on my PC laptop not wireless using an Ethernet cable. I have connected my pc not wireless to my laptop wireless pc with ethernet cable, I did everything as requested on the site of "Dummies" and the PC says its connected but when I try to go on Internet Explorer, it does not work? HELP! : (PS) my PC is Windows Vista and my laptop Windows 7

  Hello

  1. While sharing was the Internet works fine before?
  2 did you change on your computers before this problem?

  I suggest you follow these methods and check.

  Method 1: You can follow the Windows Help article below and check that ICS is set up correctly.
  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing
  If ICS is not configured correctly, then you must post back the result by running the following command
  To do this:
  a. click the Start button.
  b. type cmd in the search box.
  (c) in the command prompt, you must type ' ipconfig/all' and check the result.

  Take a screenshot of the command prompt and post.
  To take a screenshot, you can follow this link below.
  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Method 2:  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  I hope this helps.

  Thank you.

• Internet connection sharing cannot be enabled.

  Greetings. I noticed a lot of posts about a similar situation, but I don't seem to find the answer that works for me. The skinny: using Windows 7. I connected to XBox live through ICS with my laptop. Hotel has wireless and I connected to it. Then, I followed the instructions and my wireless for sharing of the value. From there on, I wired XBox laptop w/ethernet cable and XBox settings manually configured as IP address, subnet, gateway, & DNS address mask. It was working fine the first day. During the next two days, connection was super slow... but it still worked. The problem does not seem to come from the hotel's Wi - Fi connection. It was the laptop for XBox it seemed. So I did some reading more and got more stupid than usual. I tried to 'Bridge' of the LAN and wireless connections to see if I could get better results. I'm not too good sense of course so I didn't know if it would work. There can be no. This is why I removed the two bridge connections and even removed the icon of "Bridge". I tried to go back to the original configuration that has worked and that's when I started getting the "connection sharing Internet can not be activated. A LAN connection is already configured with the IP address that is required for automatic IP addressing"message. So now, when I check the share my wireless, I have that message and it won't share. I'm lost! I tried "ipconfig \all. I tried "netsh winsock reset." Nothing seems to work. I don't know if I'm doing something of out of order which does not allow local network setting. I mean... what must be plugged in the ethernet cable, or even not at all, and when it is, that the parameters of the Xbox is? I even put the XBox failing to see network settings if I could start to this end. If it was not obvious, I'm still able to access the internet wireless and wired. This is something crazy and so far, none of my smart friends have been able to help! Thanks in advance for any of yours. As I said, I'm really not good with this stuff so if you have answers, please show idiot as I am a fool proof. See you soon!  Jim C

  Hello

  You can follow the Windows Help article below and check that ICS is set up correctly.

  Set up a shared Internet connection using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  If ICS is not configured correctly, then you must post back the result by running the following command.

  To do this:

  a. click the Start button.
  b. type cmd in the search box.
  (c) in the command prompt, you must type ' ipconfig/all ' and check the result.

  Take a screenshot of the command prompt and post.

  To take a screenshot, you can follow this link below.

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Internet connection sharing (6) error during installation of nintendo wifi connector

  "sharing the internet connection (6) error" appears when I try to install a nintendo wi - fi connector (to connect between my wii and computer for netflix). I have high speed dial-up (canada), but apparently can use wi - fi connector to talk about the wii. with the first installation, it worked well enough to allow the wii. but the wii could not connect to netflix.
  the first time I had hung it, I ended up uninstalling and now when I try to reinstall it, this error message appears.
  When I got the wi - fi connector connected the first time, I did it with my antiviirus running program: the help site suggested to uninstall then reinstall the wifi band program. so this time (after you have uninstalled it), I disabled the antivirus, but now get the error message.
  I have a call in nintendo, but fear that it is a problem of microsoft xp.

  I don't have personal experience with this, but the title claims that it fixes your exact problem: Guide to fixing ' error (6) Internet connection sharing

• Vista internet connection sharing configuration

  Please take note that I have already visited the URL for windows: http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

  I did the following:

  • Configured Internet connection service.  Service is set to automatic, running, recovery failures all the value zero seconds
  • Connection to the LAN is configured as 'shared '.

  BlackBerry Curve 8330 is connected the USB cable live and is considered 'removable disk' records can be seen

  The Blackberry a browser opera mini version 4.2 installed but cannot connect to the internet.  I ask for advice on how much of the configuration is proveable and how much more needs to be configured to connect to the internet. Concrete measures to solve the problem so that I can work on what remains to do research

  Hello

  I suggest you to send your application in Blackberry forum for better support.
  http://supportforums.BlackBerry.com/T5/General-support-forums/CT-p/GeneralSupportForums

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• Internet Connection Sharing via Intel my Wifi

  Hi, I use Alienware m14x with windows 7 Home premium 64-bit
  I have just restored my laptop factory. Configure my wifi profile. When I click on share my internet it gives the error that has first of all connect to the internet. I am already connected to the internet, therefore a ground of firewall problem please help with a few problems of settings.
  Thank you.

  Hello SiddheshGajare,

  Which Wi - Fi utility you are trying to share the connection to help?
  It is perhaps that the connection is not able to share with other devices.
  You can look into trying sharing instead of use the Windows internet connection Wi - Fi connection utility:
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
  The instructions also apply to Windows 7.