Internet connection with wi - fi in a household with wi - fi, installed on another computer at home

Similar Questions

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How to share an internet connection Wi - Fi, which requires the user name and password on a laptop computer of Windows 8 on a PC with Windows XP?

  I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...

  Hello Ashan,

  Thanks for the reply.

  You can try to follow the following suggestions to solve the problem.

  First, try to reset Internet Explorer and see if that helps.

  Reset Internet Explorer

  http://support.Microsoft.com/kb/923737

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Additional information:

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.

  (Also works for Windows 8)

  Updated a hardware driver that is not working properly

  To connect to the Internet

  http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How to download and install on another computer without internet connection?

  I have an old computer with windows XP Home Edition. How to download and install on another computer without internet connection?  Files such as DirectX, real player, Media Player.  What I find it just download and install the file must then go to the internet.

  The following site may be worth a visit:

  Microsoft Download Center
  http://www.Microsoft.com/download/en/Search.aspx?p=0&r=10&t=&s=availabledate ~ Descending true... some files are simply web installers, but if you continue
  the research you should be able to find the full downloads. You can
  Talk about the size of the file if you get the full download.

  For Microsoft files... it can help search for developer files
  or redistributable.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Use DirectX Runtimes (June 2010)
  http://www.Microsoft.com/download/en/details.aspx?ID=8109

  RealPlayer
  http://www.filehippo.com/download_realplayer/

  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month so I don't understand why that'

  Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month, so I don't understand why this is happening. I really need to work now and I can't. Great work Adobe Cloud. Any suggestions on what can I do? Thank you

  Check that your current account (and only the adobe, used in the next step id is good) by logging in here and check the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• Internet connections with 8.1

  My HP Pavilion Touchsmart (model #14 - b124us) recently updated itself windows 8.1. I can't access the internet now, although my wifi works. (another household laptop and tablet together to connect) It only shows limited connectivity or none, continues to go back, but I can't access anything whatsoever. I read some of the forums on this problem, but I'm not as tech savy as most here and should be explicit procedure step by step sent me if she understood the update of a driver, etc. Please let me know if you can help!

  Donna

  Hi@dmz1123,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion TouchSmart 14 - b124us Sleekbook and problems with your Internet connection and your update with the 8.1 Windows updates. Here is a link to the reconnection wireless for my laptop.

  Please let me know how it goes.

  Thank you.

• Internet connectivity with iOS 9.3 problems

  I have an iPhone handset 6

  Since the update the handset does not connect to the internet.

  Indeed, despite a complete network redefined and, when the connection through wifi to my router at home and tries to access the internet - no luck!

  IPhone 6 combined - still on the old version - disorder web access my wife.

  I can only put it down to the upgrade and the information circulating on the net about similar issues.

  The iTunes doesn't seem to recognize that there is a more recent patch for the 9.3 iOS version 13E233. Some sites there indicate iTunes should detect a fix updated since this original version. I saw the reference to 13E234.

  Help, please. Frustrating that *!

  iOS updates regularly change of variables operating system which, from time to time, will affect negatively other parameters and the features of the component on the device (including WiFi).  In addition, this can be a problem with your carrier and the specifics of your plan data or of the SIM card in your device settings that need to be addressed or refreshed.  To update the carrier settings, place a call to your carrier and place them on your device.

  This particular issue on the side of the Apple of street connectivity has been surfacing regarding the update and its been mainly a question of the environment such as WiFi access or your router (s) your help, I've had this as well and here are the most effective steps, I can give you to solve.

  WiFi/Internet environment

  1 restart your router

  2. check the latest version of the firmware on the router (router manufacturer and manual will have instructions on this one)

  Apple IDevice

  3. remove the WiFi access point of your iDevice which is the blue tick, if its power to establish at least a connection with your internet facing router it is a very practical and viable step to achieve. Settings > WiFi > * WiFi Access Point name * > forget this network (another option is to simply renew the lease, which will be used in blue at the bottom of this screen) my recommendation is to forget this network and let your iDevice and the router to build a new pile of access point.

  4. (optional if nothing above has solved the problem on this point) reset network setting on your iDevice, you will probably need to provide credentials for your router here.  Settings > general > reset > reset network settings > restart

  5. last resort to restore your device using iTunes, using iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

  It is a fairly complete set of instructions to identify it's a software or a configuration issue with your device.  If after that you had accomplished each of these steps, the problem is not resolved, move to consider a repair like the WiFi hardware physically in the device may be damaged.

  See you soon

• Problems of Internet connection with a Satellite Pro A120

  Hi, I do not know if someone can help me, but I thought that it was worth a try, because I'm desperate.

  Basically, I can't here online with my computer.

  I am currently away from home, back to my parent's House. I usually am on AOL dialup, they are on the same but with broadband, and until last night, I managed to use their connection high speed without any problems.

  I've updated my AVG, and did an update windows yesterday.

  Today while I was doing something, my screen AOL flashed upwards (disconnected) but I thought nothing of it, until what I tried to get online this afternoon.

  Now, while I'm connected to broadband including wireless router controls and I said that I have a strong connection, I get up then a message of not being able to get an internet connection when I actually try and connect. I don't know if it's AOL or the computer, but because I can get on AOL by using the computer, my parents, I guess to it that I don't see that I did something to stop this connection.

  When you try to sign in to MSN messenger I'm also coming with a message that says that my DNS is unable to resolve my IP address. I don't know if that makes no sense?

  I tried to rebuild my log in the location using the AOL software, but it makes all the difference.

  If anyone has any suggestions as to what could happen, or better yet how to solve, I would be REALLY grateful.

  Thank you

  Kat

  First of all, you must check if one of you firewall don t lock you internet connection.

  In addition, you need access to network connections and in the LAN and WLan connection, you should check the general tab-> settings/properties of Internet Protocol (TCP/IP).
  All (IP, DNS, Getway, etc.) must be set to automatically obtain the address

  Last but not least, it would be appropriate to delete your AOL profile and configure everything again.

  Good luck

• No internet connection with C6300 only cable modem/router - No. Ethernet cable plugged

  About once or twice a week I wake up my desktop PC and see an icon (bottom right) which indicates that I have no internet connection. When I run the troubleshooter network (right-click on the icon) it says to plug in my ethernet cable. I replaced the cable with another know good cable, but the problem continues to return (though intermittently). If I unplug the ethernet cable from the port of my C6300 Netgear and plug it back in the same or another port, the internet connection is restored. I'm on Windows 10 edition 64 - bit OS on my desktop tower PC (Dell). My internet provider is Cox Communications through their cable with up to 100 Mbps of speed. My Netgear firmware version is V1.02.20 to help you can provide me to solve this problem would be appreciated.

  Well, it has been a few weeks of performance without error since I replaced the Netgear C6300. So I close this investigation as "FIXED."

• Problems of Internet connection with Windows CE 6.0

  original title: frustrated

  I have a netbook with windows ce 6.0 and I tried each troubleshooting method that could think about my internet provider which is clear. The problem is when I'm at work I can use wifi there without any problem, but at home I can't all internet so the end result is clear wireless telling me that they do not support windows this. I know I'm not the only one with windows this or the one trying to get on the internet.

  Hello

  ·          You use a router to connect to the internet?

  ·          If Yes, have you tried if internet connection work when it is connected through an Ethernet cable?

  Question suits you best in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en/category/EmbeddedWindows

  Diana

  Microsoft Answers Support Engineer

• Internet connection with a wired network card Gigabit speed limit

  Can you reach 150 speed Mbps Internet connection on a computer running Win XP SP3 and IE8 with the help of the Gigabit wired network adapter?
  What kind of drivers are required in such a case?
  Currently, I have 150 Mbps of connection, and what I get according to the speed tests is of the order of 60 Mbps with pings of 30 to 60 ms.
  My troubled wired adapter is TP-LINK Model: TG-3269-based Realtek RTL-8169SC chipset and its driver: rtnicxp.sys, v.5.649.0615.2006 (WinDDK) provided by Realtek

  The fact that your Ethernet card is theoretically capable of 1000 Mbps does not mean that everything in the path between your computer and the fiber cable (which is what your ISP based his spec 'speed' on) is capable of the same way.

  For example:

  • What type of cable you are using between the computer and the modem/router... and how long is it?  You did the cable yourself or did you buy it with the connectors already attached?  You must at least Cat 5 cable and attach the connectors yourself is not recommended, unless you have a good amount of experience doing.
  • What brand/model/version of your modem/router?  It has the latest firmware installed?

  You have a second computer that also has a Gigabit network?  If so, check the transfer speed of A computer through the router to computer B (i.e. What is the transfer speed of your LAN, completely apart from the speed of transfer between you and your ISP).  Use a stopwatch and a large file or use a utility such as LAN Speed Test.

  What TG-3269 version do you have?  The current one is V3.

  Assuming you have v.3, you appear not to have the latest version of the driver (though I doubt that's the problem).  The package labeled TG-3269_XP_beta a 5.719.0325.2009 XP driver version.  http://www.TP-link.com/en/support/download/?model=TG-3269&version=v3#tbl_a
  Finally, you may want to think about your connection setting, what is most important for XP and later versions of Windows: http://www.dslreports.com/tweaks and http://www.psc.edu/index.php/networking/641-tcp-tune

• PC cable loss of internet connection with router WRT160N V2

  I'm new to routers and I just added a router WRT160N (V2).  Wireless through my laptop is great. However, I have 1 PC connected physically to the router. The internet connection is sporadic on this PC. I have "wireless" internet service high speed and sometimes you click internet or check your emails, and there is no internet connection. It seems to be after the PC has been idle for a while. When you click on the internet icon PC on the router not even flashes her - it's like the PC and the router do not speak. If it does not connect, the connection is great. Any help would be appreciated!

  There is a known problem with intermittent connectivity and firmware to build 11 for the WRT160N V2. 11 is the current firmware on the Linksys site. Check if you have 11 build if your router is a V2.
  Downgraded to build 8 fits usually correct these deficiencies, but Linksys told several people that they do not have firmware version 8 to give end users.

  It's ONLY for the WRT160N V2 router. This firmware will not work on WRT160N V1.

  You can find it at http://audipages.com/router/

  Follow download them and instructions to downgrade firmware on this page.

• share my internet connection with another computer using a router

  My question is if I give you my wep key to another computer in my house so that it can access the internet will be my files or no matter what content of my computer stays private, I need to share my internet connection without sharing something else?. Thanks JF

  In general, it is safe to do so - just a person granting access to your network will not give them access to your files on your computer unless you are already sharing files with another computer on your network.  In this case, you want to check your sharing settings to make sure that the shared files are not available for all users of the network.  The thing I'd be worried, is whether or not the person you share with is "don't own"-no virus, malware, etc. on their computer, given that some of these programs can spread via a shared network connection.

  "Jeanfrancoisdoray" wrote in the new message: * e-mail address is removed from the privacy... *

  My question is if I give you my wep key to another computer in my house so that it can access the internet will be my files or no matter what content of my computer stays private, I need to share my internet connection without sharing something else?. Thanks JF

• Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

  Hello

  I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

  My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

  What should I do to fix this?

  Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

  The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

  Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

  Press OK and wait for to reconnect you.

  I hope this helps.

  Jeferson Vasconcellos