Internet icon on the taskbar says no internet access on that network (shows yellow triangle) and yet THE internet connection!
Hey,.
the problem fixed itself. the router has been moved to the basement with my brother, and when he moved back to the floor it just fixed itself. don't know why or what it does first place. Well.
Tags: Windows
Similar Questions
-
I'm not able to open PS CC. I get a message that I need to connect to the internet, and yet I am connected.
Hello johns,
See the links below:
Solve common problems of activation and deactivation of creative cloud.
-
All I want to do is enlarge the icon on the page connect
all I want to do is enlarge the icon on the page connect
If you already have a password, there is no way to enlarge the icon. teengeek.freehostingcloud.com Microsoft community contributor
-
Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
step by step information!Hello
I suggest you to refer to the links and check if it helps:
Create a homegroup
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup
Join a homegroup
http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network
Remote Desktop connection
http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection
What types of connections remote desktop should I allow?
http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow
Remote Desktop connection: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
Let us know if it helps.
-
Currently under Vista 64-bit with Service Pack 2.
"Records among 'Application Data', 'Cookies', 'Local Settings', 'Neighbourhood of printing', 'Recent', ' send to ', 'Start Menu', 'Templates', 'Documents & Settings', 'Office' Documents ', 'Default user' at different levels 'tree '.Some of these folders are junction points http://msdn.microsoft.com/en-us/library/bb968829 (VS.85) .aspx which are NOT supposed to be accessed (they are there for backwards compatibility). Even though you can access it, you would not make all changes because that could cause programs on your system suddenly stop working right and fixing the problem would be troublesome.
Some files are special system folders and are blocked by permissions. These can be replaced if necessary (but they are probably blocked for a reason to make sure you know what you're doing when you try to access - usually, this means that changes can have a negative effect on your system unless you REALLY know what you're doing).
Some of the files you listed should be available or can be made available (possibly with modifications of permission) If you are in your profile (or an administrator in another profile). For some of these issues, I would ask that you are trying to do - there is no reason to open some of these files. Others, I can see the point and we can 'fix' by changing the permissions and/or property as follows:
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block even against access and they serve as points of junction, for example (if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.
To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner). You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.) Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.I hope this helps.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
I need help I bought bright room 6 adobe photoshop light Room 6 version I have the dvd and they gave me a redemption code, I typed in it and he said it was a success, and yet I have not received an email... .i could not access right room because his request because the key and I don't have not any e-mail regarding the key to some body help me please what wrong?
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-
See above
This can happen if the servers are overloaded / can not handle the number of people on it
It's on your network 100 Mbit/s does not mean that that's what you're connected to the Internet.
-
iOS 9.3.2
My iPhone and iPad wake connected to cellular data so that I have a home network and expect things to happen on my network home. It costs me in the case of the background activity while I'm SLEEPING on my cell the att network connection. How can I fix?
Thank you
Barb
Maybe a WiFi Assist. On the devices go to settings > cellular > scroll all the way down > Wi - Fi help > Toggle Off. See if that helps.
-
While on FB a few days ago the page suddenly recharged without any picture although I do not know after pressing something in particular. Despite the closure and reopening, they have not returned. However, when I connect via the Explorer on the same computer the normal FB page with photos appears.
With Facebook on display, click on the site identity button (for more details on this button, see the How do I know if my connection to a Web site is secure? section), and then click more information. This will open the page info dialog box.
First, select the permissions tab, make sure that 'Load the Images' is set to allow (default selection should work as well)
Then select the media tab, and then click the first item in the list. Use the down arrow key to scroll the list. If any element has the option 'Images of block of (field name)' selected, deselect the option.
This should hopefully solve your problem, but see also the problems that cause to not show images.
Some add-ons can also block images, for example, if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block images.
-
My photoshop does not work, its saying that my subscription was suspended and I need to connect to the internet when I'm logged in my deck works great
Please download creative cloud from the following link: Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial
-
Lose my ethernet internet connection when the computer goes into mode 'sleep '.
I have a desktop with Windows Vista. I have my internet through a cable company. I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'. I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused. The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats. It's boring say the least. When I login and go to the LAKE State he says;
IPv4 connectivity: Internet
IPv6 connectivity: limited
Media state: enabled
Duration:
Speed: 100.0 Mbps
He said that the issue is resolved after each diagnostic test, but then it happens again. I need some help pleaseeee!
> I need some help pleaseeee!
But you're in the wrong group! It is a problem with your network driver
or your Windows installation. You have this repost to a suitable for Windows Vista
Forum. It is possible that a newer driver from the network has a problem with sleep
mode, you should try another pilot (older or newer).
From your description, there is a problem to renew the lease of your
DHCP server (which must be running on your router), it does not use the
IP address assigned earlier or he does not do / IP address (which
should be the same) we get the router. It is also possible that the
problem is with the router or a new firmware on this subject. You should study
These two avenues, including a replacement of the router and firmware.
Another very simple solution is to configure your PC for a static IP number and
leave it like that. In the forum, I mentioned, people will be able to talk to you
through this option if you don't know how to do this.--
KaiIEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer
-
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.
But Google chrome works well.
So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:
2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection
-
Cannot get internet connection through wireless network
I have a Sony VAIO laptop that came with Vista 32 bit and went from 7 Home Premium 32 bit. I connect to the internet via my Ethernet via a DSL modem with no problems. When I try to use the edge Intel 4965AGN wireless to connect to my DLink 655 Wireless N Gigabit router, it appears that it connects to the network, but there is no internet connection. Both the router and the edge Intel have the latest drivers and the encryption is set on AES, WPA2-Personal. Some additional information:
I have desktop computer Dell with a DLink USB WiFi and it connects to the network and gets internet
I constantly get the message from Windows saying: Windows has detected an IP address conflict with another computer on the network. I restarted the router several times to no effect.
In network and sharing Center (of course the troubleshooting network said he found nothing) the network appears as a Public and unidentified and it gives me no option to change it to a home network.
I tried to connect to other networks public wireless (hotspots) and I can't connect it
Hello
Something is wrong with the TCP/IP parameters.
Autoconfiguration IPv4 address:169.254.1 52.88
IPv4 subnet mask: 255.255.0.0
Autoconfiguration IPv4 address: 192.168.0.1
IPv4 subnet mask: 255.255.255.0
IPv4 default gateway:This 169.254.1 52.88 is the IP by default Windows assigns when there is no DHCP server, this isn't a working IP address.
The second IP address is the IP address of the Wired card. That is why router conflicted reports.
Configure the two cards for full Auto obtain IP and DNS.
Then do a WinSock and TCP/IP updating.
Type Cmd in the search text box.
Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt. Allow the elevation.
Type netsh winsock reset at the command prompt and press the Enter key.
Do the same process to refresh the TCP/IP just replace the command typed with.
netsh interface ipv4 reset Press enter
netsh interface ipv6 reset Press enter
ipconfig/flushdns press Enter
Restart your computer.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
ISATAP adapt #2 Error Code 10 CAN t start, so no wireless internet connection
To start my computer this morning seeing wireless not turn on, and I have no internet connectivity wireless. When I looked at the hardware Manager, there is a yellow triangle next to ISATAP #2 card. When I clicked on this one message gave me the error code 10 and said that he could not start. Have reinstalled and checked the driver without result, have executed a microsoft fix it program with no joy. I haven't changed anything except I just set up a new battery. How can I set this yellow triangle and get my wireless to work?
Am running Vista, on a computer HP compaq laptop.
Hello
Even if the router is working on her he might still have a problem with your. Remove the power
for the modem, the router, and your computer, and then turn on then again in that order. A hard
reset as that will help eliminate a cause, although not completely.Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have a PS icon on my taskbar, but none under all items
I transferred my programs and settings with Laplink PC Mover (that I do NOT recommend because it brings to your programs more but 1/2 of them won't open or work not well) my computer Win10 homepage to a new computer pro Windows 10. Photoshop is one of the few programs on which works, but with this problem.
Photoshop CS5 works fine on my computer. I have an icon in my taskbar. If I go to Windows Explorer to my pictures and click on a photo, Photoshop opens.
But if try to open Photoshop in all Apps, he's not there under A for Adobe, or P for Photoshop. If I right-click on the icon in my taskbar, I can not put an icon in my Start Menu.
I don't want to uninstall/reinstall (this is why I bought the PC Mover).
Any suggestions?
Many programs need to be installed to work correctly for several registry entries are necessary so that they work properly. While Photoshop can start from your taskbar. Photoshop may not start if you double-click an image file in the explored file types of files are not associated with Photoshop. For Photoshop registry keys are not in your registry if you do not have Photoshop. Even if you place a shortcut in you start menu Photoshop may start but may not work correctly. The registry change a hundred or more are made during installation of Photoshop. You should install Photoshop.
You can most like add an icon for Photoshop in your button start the file Windows Explorer navigate to find folder of Photoshop Photoshop.exe right click and click on create a shortcut. Shortened to rename to Adobe Photoshop Version move the renamed shortcut the the Start button folder "C:\ProgramData\Microsoft\Windows\Start start\program.
Maybe you are looking for
-
Firefox Sync is not synchronize all parameters
Simply set the sync firefox until firefox sync between my Win7 laptop and Tablet Win8, most of the firefox settings * seem to sync and all extensions, but none of the settings related to extensions is present on the win8 tablet. Is that how it should
-
How to use Dasylab measurement temperature TC
Hello I need measure the temperature of the thermocouple DataShuttle-3000 with Dasylab. The 3000 datashuttle is specified as "input thermocouple on any of the 8 differential inputs. When I try to put in place the analog input module (PQaq3k - 1:Al) i
-
Discovery of many errors Windows Update with 0x80070005.
I was recently reviewed my updates on the website and discovered 40 + updates Windows Update called "Update for Windows XP" or "Update security for Windows XP" that have failed. Most of them have the error 0x80070005. I never had any sort of error po
-
Wat is i/o error one can it fix b
I have a maxtor one touch 4 year I can not open it keep IO error can it fix b?
-
Hi all I'm trying to implement MediaPlayer invocation in my application, but faced the following problem. Here is the code: Invocation { id: mediaPlayerInvocation query: InvokeQuery { invokeTargetId: "sys.mediaplayer.previewer" mimeType: "video/mp4"