Internet is unable to find a certificate to log...
Unable to connect to my wireless network. See the message: «...» "Unable to find a certificate to log". I tried to pass by & IEEE activation, but that the screen allow me to click on anything whatsoever. I tried to remove my wireless network & reconnect, but I still get the same message. Any suggestions?
Hi MeganFrost,
· You did it of any material changes or software on the computer before this problem?
· What is the brand and model of the network adapter?
You can follow this link and check if it helps.
In the Windows wireless network connection problems
Hope the helps of information.
Please post back and we do know.
Tags: Windows
Similar Questions
-
Windows could not find a certificate to log on netgear47
I have 2 laptops, Dell is connected and the notbook connects without a problem. I try to connect this old Vaio pcg - K33 K series and the message above. It comes to XP.
I hung a cable from the router to the computer and can get online but still can't hang wireless.
Your information is somewhat distorted, but I guess that what follows:
'Netgear47' is a model of a Netgear wireless router.
The error message that you get on the Vaio is similar to "Windows could not find a certificate to connect to the network.
What version AND service pack of Windows XP is installed on the Vaio (right click my computer and select Properties, if you do not know).
The most likely problem is that on the Vaio's wireless adapter is misconfigured. If you use Windows wireless zero configuration (WZC) to configure the card (and not a utility provided by Sony), see the following for directions on how to correct this problem: http://helpdeskgeek.com/how-to/windows-was-unable-to-find-a-certificate-to-log-you-on-to-the-network/
While you are on the "Wireless network connection properties" screen (in the middle of the 3 images on the site linked), look at the box at the top ('use Windows to configure my wireless network'). If this box is NOT checked, then the fix suggested on the web site may not work and you will need to use the utility Sony to make a similar change. In this case, it may be easier to simply delete the 'profile' of your network in the utility of Sony. When you try to connect after you have deleted the profile, the network must be configured correctly.
-
I'm so unable to connect to the internet?
Hello.I'm so unable to connect to the internet.
Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
Windows XP computer desktop, which is a Dell Dimension 4700.The questions that I get connection are...
"windows could not find a certificate to log on the network.
"Limited or no connectivity."
I did all the solutions I could try to fix the connection problem!
1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»
2. then, I disabled the network connection and then enabled. That no longer works.
3. I tried to withdraw from the ordered list of connections, and it still doesn't work.
4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.
5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.
6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.
7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.
Windows IP configuration
Node type: unknown
Active IP routing: no
WINS proxy enabled: no
ETHERNET connection to the Local network card
State of the media: Media disconnected
Description: IntelPRO/100 VE Network Connection
Ethernet card 2 wireless network connection:
Suffix the connection-specific DNS: (EMPTY)8. after that, I typed the command: ipconfig/release
and then I got this error...No operations can be performed on the connection to the local network, although it has its media disconnected.
9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
A solution was10. opening of Services...
Start | Run | Type: services.msc | Click OK |
Scroll down to and double-click Client DNS | Set to automatic on startup
type |
Click apply | Click the Start button | When it starts, click OK
Do the same for the DHCP Client.
Do the same for the remote procedure call (RPC).and it still doesn't work.
11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.
12. I tried to uninstall and reinstall the network card and who does not work either.
It is not the network itself that is the problem. It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.
My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.
What should I do? Thank you for your time.
Sincerely,
Justin
Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.
-
Windows could not find a certificate to log on the network
So I try to connect to the network that appears, and then trying to connect but it with "Windows could not find a certificate to log on the network. Now, I tried unchecking security in the properties box and also to uncheck it to 'use windows to configure my wireless network.
NONE OF THESE WORK FOR ME!Also attempted to fix the network, but he says that "windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network '"I am currently under SP2, but in the process of installing SP3.Help!This error usually occurs because you have specified a connection protocol 802. 1 x. You must configure your properties to uncheck this box. See the following article:
"Windows could not find a certificate to log on the network.
HTH,
JW -
Hello
I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp
Thank you
Hello
I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp
Thank you
Thanks for posting. Follow the instructions below carefully.
- Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
- Scroll down to network adapters. Develop the content by clicking on the symbol +.
- Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
- Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.
-
laptop tells me that it cannot find a certificate to log too
What is a certificate
What is a certificate
If you are a teacher, you should be able to ask better than that. Seehttp://support.microsoft.com/kb/555375
If I had to guess, I suppose you are trying to connect to a home wireless network and the box to "Enable IEEE 802. 1 x authentication for this network"is checked (do not).
- Open network connections (start > run > ncpa.cpl > OK)
- Right click on your wireless adapter icon and select Properties
- Click the wireless networks tab
- Select your network from the list of preferred networks, and then click "Properties".
- Click the Authentication tab
- Uncheck the box and OK your way out.
- You should not restart, but do it anyway, on general principles.
If that doesn't help - and if your question relates to a wireless home network - and then follow the above instructions until step 4, but instead click on 'Properties', click on 'delete '. Then go to the list of available wireless networks, find your network and click on connect. Enter the password when you are prompted.
-
When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is
a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.
Hello
· What type of encryption do you use on the router?
· You have the latest drivers for your wireless network card?
Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.
a. Click Start, then select run.
b. term ncpa.cpl type dialog box and then click OK.
c. right click on wireless network connection icon and select Properties.
d. click the wireless network tab.
e. click on the properties button next to remove it.
f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.
g. click OK to update the settings.
-
Unable to find certificate to log on to the network
Well guys, I see that it is a problem that has been lingering for a while and I see that several people have described situations similar to mine, but so far I have not found anything to fix the problem if this annoying box is unchecked.
But fundamentally, our situation is as follows. We have a router that we all used without problems for more than six months on the four different laptops and a desktop computer. Two months ago the internet provider cut internet, but the router was plugged left. We have been able to access the router connection without problem. Then, last night, we got the internet hooked up again. I was able to connect to the router with my Toshiba laptop (Windows 7) and HP (Windows Vista) office, a roommate was able to connect with his Mac laptop (hell if I know what OS), but our other roommate is to get this identity validation / can not find the certificate on his Toshiba laptop (Windows XP). He followed the directions given and when it gets to the last statement, the box is unchecked and highlighted so that you can't do anything to change it anyway. It can connect to other signals, but not our home signal, which we left unsecured while we try to understand this. Help someone? We are open to suggestions here.Well guys, I see that it is a problem that has been lingering for a while and I see that several people have described situations similar to mine, but so far I have not found anything to fix the problem if this annoying box is unchecked.
But fundamentally, our situation is as follows. We have a router that we all used without problems for more than six months on the four different laptops and a desktop computer. Two months ago the internet provider cut internet, but the router was plugged left. We have been able to access the router connection without problem. Then, last night, we got the internet hooked up again. I was able to connect to the router with my Toshiba laptop (Windows 7) and HP (Windows Vista) office, a roommate was able to connect with his Mac laptop (hell if I know what OS), but our other roommate is to get this identity validation / can not find the certificate on his Toshiba laptop (Windows XP). He followed the directions given and when it gets to the last statement, the box is unchecked and highlighted so that you can't do anything to change it anyway. It can connect to other signals, but not our home signal, which we left unsecured while we try to understand this. Help someone? We are open to suggestions here.What are the directions have been followed? What is "the last statement?
Do you mean the box for "enable authentication IEEE 802. 1 x for this network? And what do you mean by ' underlined so you can't do anything to change it? Do you mean that it is grayed out (see this screenshot:http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/Wireless_Networks/Properties/Authentication.shtml )?
Delete the entry for the network entirely and start over:
- Open network connections (start > run > ncpa.cpl > OK)
- Right click on the wireless adapter icon and select Properties
- Click the "Wireless Networks" tab.
- In the list of "Preferred networks", look for the entry of your router, select it and click on the button Delete. While you're here, you can as well delete the entries for other networks that you do not use.
- OK your way out
- Now, go to view wireless networks or view available networks, find your network and click on connect.
-
I need to get a certificate to continue using WI - FI how di I find the certificate?
I need to get a certificate to continue using WI - FI how di I find the certificate?
Original title: WiFi problem
Hello
1. who is the operating system installed on your computer?
2. What is the exact error message that you receive?
3. who is your Internet service provider? Have you tried to contact them about this?Follow the steps mentioned below and check if that helps.Method 1: You can check if the router is configured for WPA and WPA2 connection:
a. If the router is configured for WPA and the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA.
(b) if the router is configured for WPA2, then the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA2.Method 2: You can manually disable authentication IEEE 802. 1 x. Subsequently, re - enable authentication IEEE 802. 1 x and see if the problem still occurs.See: If you use a NETGEAR wireless router, you can follow this link:
Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
http://support.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XPReference: Use certificates for security and privacy
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/cert_ovr.mspx?mfr=true -
I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.
Shaida is my wireless modem.
How to fix this problem?
Before the resumption of connection Internet worked normally.
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/870702
It will be useful.
-
I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me
You are the very welcome.
I do not take up that simple...
Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works. Ditto for the quick launch buttons.
These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).
Paul
-
error message: "windows could not find a certificate to connect to the network.
My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.
Hello
Did you change your computer before this problem?
You can follow the procedure in the article.
Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
Alternatively, you can contact Netgear support to improve assistance in this regard.
Welcome to the NETGEAR support
-
Can not solve the problem "Windows could not find a certificate...". ».
I read through all the posts related to "Windows could not find a certificate...". "but still failed to get a solution for my problem.
Well, I have no problem with the installation of this modem to router Wireless G ADSL2 + for both my notebooks of Vista, they work perfectly.
However, I have difficulties with 2 other computers that move on the XP version. This version XP 2 PCs sometimes show the connection of the signal very strong to my network and sometimes simply shows "Windows could not find a certicate to connect to the network.
Even when it indicates strong signal to my network connection, I can still surf the internet/LAN. Where is the problem?
Can anyone help?
Thanks for the reply.
Nonetheless, I have chosen the way easier and solved the problem.
Connect the network cables for these 2 not for PC XP update and they work just as perfect as my other 2 portable VISTA wireless.
-
IKE initiator unable to find the policy; Outside INTF, CBC: error
I have a Cisco ASA 5505 having a tunnel at a remote office. I just put in place another identical to another tunnel and when I followed the VPN in ASDM I see that the VPN is active. But I can't ping through it. When I check the logs I see "IKE initiator unable to find the policy; Outside INTF, CBC:... "Nobody knows what might be the cause? Here is a copy of the configuration. Thank you.
See the config of bdavpn1 #.
: Saved
: Written by admin in 17:54:11.823 HAA Monday, June 7, 2010
!
ASA Version 8.2 (2)
!
hostname bdavpn1
domain.com domain name
activate the encrypted password of OSaXLnYQKkAcBhYA
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
192.168.2.100 IP address 255.255.255.0 ensures 192.168.2.101
!
interface Vlan2
nameif outside
security-level 0
IP 101.17.205.116 255.255.255.1018 Eve 101.17.205.117
!
interface Vlan3
nameif dmz
security-level 50
IP 172.20.0.1 address 255.255.255.0 watch 172.20.0.3
!
interface Vlan4
Failover LAN Interface Description
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 91
!
interface Ethernet0/3
switchport access vlan 3
!
interface Ethernet0/4
switchport access vlan 3
!
interface Ethernet0/5
switchport access vlan 4
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone AST - 4
clock to summer time recurring ADT
DNS domain-lookup dmz
DNS server-group DefaultDNS
Server name 172.20.0.99
domain.com domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network Chicago-nets
object-network 10.150.1.0 255.255.255.0
object-network 10.150.55.0 255.255.255.0
object-network 10.150.56.0 255.255.255.0
object-network 10.150.57.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 192.168.26.0 255.255.255.0
object-network 10.150.111.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.4.0 255.255.255.0
object Group Chicago-nets
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.4.0 255.255.255.0
object Group Chicago-nets
the DM_INLINE_NETWORK_3 object-group network
object-NET 172.20.0.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
the DM_INLINE_NETWORK_4 object-group network
object-NET 172.20.0.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
outside_cryptomap to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_1 object-group
inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_2 object-group
inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 172.20.0.0 255.255.255.0
inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_3 192.168.4.0 255.255.255.0
inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
Note to access list outside_to_dmz allow access to the citrix Server
outside_to_dmz list extended access permit tcp any newspaper HTTPS host 101.17.205.123 eq
dmz_to_inside allowed extended access list host 172.20.0.2 ip 192.168.2.0 255.255.255.0 connect
Note to outside_access_in entering of Citrix access list
outside_access_in list extended access permit tcp any host 101.17.205.123 eq https
outside_2_cryptomap list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
pager lines 101
Enable logging
timestamp of the record
logging paused
logging buffered information
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP verify reverse path to the outside interface
failover
primary failover lan unit
failover failover lan interface Vlan4
failover interface ip failover 172.16.30.1 255.255.255.252 watch 172.16.30.2
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 625.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
Global interface (dmz) 2
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
static (dmz, external) 101.17.205.123 172.20.0.2 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Access-group dmz_to_inside in dmz interface
Route outside 0.0.0.0 0.0.0.0 101.17.205.115 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
LOCAL AAA authorization command
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
redirect http outside 80
SNMP-server host inside 10.150.1.177 community survey * version 2 c
SNMP-server host inside 10.150.2.38 community survey * version 2 c
location of Server SNMP Hamilton, Bermuda
SNMP Server contact René Bouchard
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
inside
redirect http outside 80
SNMP-server host inside 10.150.1.177 community survey * version 2 c
SNMP-server host inside 10.150.2.38 community survey * version 2 c
location of Server SNMP Hamilton, Bermuda
SNMP Server contact René Bouchard
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map3 1 match address outside_cryptomap
outside_map3 card crypto 1jeu peer 101.88.182.189
outside_map3 card crypto 1jeu transform-set ESP-3DES-SHA
card crypto game 2 outside_map3 address outside_2_cryptomap
outside_map3 crypto map peer set 2 101.1.95.253
card crypto outside_map3 2 the value transform-set ESP-3DES-SHA
Crypto map outside_map3 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
outside_map3 interface card crypto outside
Crypto ca trustpoint bdavpn1
Terminal registration
domain name full bdavpn1.domain.bm
name of the object CN = bdavpn1.domain.bm, OR = Ltd, O is domain, C = US, St is of_confusion, L is Hamilton,[email protected] / * /
Configure CRL
Crypto ca certificate card domainincCertificateMap 10
name of the object attr cn eq sslvpn.domain.com
Crypto ca certificate chain bdavpn1
certificate ca 00
30820267 308201d 0 a0030201 02020100 300 d 0609 2a 864886 f70d0101 04050030
32310b 30 09060355 04061302 5553310 300 b 0603 d. 55040 has 13 41 53311430 04414c
12060355 0403130b 63612e61 6c61732e 636f6d30 35303130 31303630 1e170d39
3335 30313031 30363031 31395 has 30 32310 b 30 170d 3131395a 09060355 04061302
300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
06092a 86 4886f70d 01010105 0003818d 00308189 819f300d 636f6d30 6c61732e
c19012ed 02818100 4cf67378 c9347162 2bcf6519 a3ab748f 1c9cae07 5c232c93
8a 625638 68416412 and 55808768 412675bc 5906ba4a 3ffd1d101 303d0ea7 d559ccf8
0d425ffc edf1cee8 337ca5c7 5f718f2d 081551f8 fc742b78 8866de9b c82310b0
89975e30 7ea7f047 bf518ac3 aa2dfd7e f93b1016 7d5261ea 34f18fa7 748d52c8
7595ecb3 02030100 01a3818c 30818930 1 d 060355 1d0e0416 0414c1ab b8651761
fc3f12d1 b132322e be36ff6a cecb305a 0603551d 23045330 518014c 1 abb86517
61fc3f12 d1b13232 2ebe36ff 6acecba1 36 has 43430 32310b 30 09060355 04061302
300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
6c61732e 636f6d82 0100300c 0603551d 13040530 030101ff 300 d 0609 2a 864886
f70d0101 818100ad 04050003 1d558eab 05d50f7b b656e2c4 213a9ac3 1cecee73
0251f931 0b47e84f f3c0847e b2168562 d27330b3 72c8023f b83aeb4a 2db8fbf7
f4575c8e c56300aa 6d5b0fd3 092e7747 76 76286 26e81b3e 4ca35b71 792380b 9
ca480932 c58a8ee6 2fa62a73 aa1d209d 68662c 59 0b8a71f1 c2db0cbb 5aefc8c5
bedcbda7 caf46f0c b01def
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
crypto ISAKMP ipsec-over-tcp port 10000
Telnet 0.0.0.0 0.0.0.0 inside
Telnet 0.0.0.0 0.0.0.0 outdoors
Telnet timeout 120
SSH enable ibou
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 60
Console timeout 0
management-access insidea basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
prefer NTP server 192.168.2.116 source inside
NTP server 192.168.2.117 source inside
bdavpn1 point of trust SSL outdoors
WebVPN
allow outside
enable SVC
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
LtdAdmin XRlF3jA1k3JEhNgr encrypted privilege 15 password username
domainadmin encrypted E1zLpTPUtBADN9og privilege 15 password username
tunnel-group sslvpn.domain.com type ipsec-l2l
sslvpn.domain.com group of tunnel ipsec-attributes
validation by the peer-id cert
trust-point bdavpn1
tunnel-group 101.88.182.189 type ipsec-l2l
IPSec-attributes tunnel-group 101.88.182.189
pre-shared-key *.
tunnel-group 101.1.95.253 type ipsec-l2l
IPSec-attributes tunnel-group 101.1.95.253
pre-shared-key *.
tunnel-Group-map enable rules
Tunnel-Group-map domainincCertificateMap 10 sslvpn.domain.com
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 10101
ID-randomization
ID-incompatibility action log
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
inspect the icmp error
inspect the amp-ipsec
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:a23ada0366576d96bd5c343645521107Scott,
When you check the status of the two tunnels of the CLI, check the following:
HS cry isa--> of his watch as active or QM_IDLE
HS cry ips his--> shows the packages encrypted/decrypted
The second tunnel does not properly come upwards, should ensure that policies correspond to the two ends of the tunnel.
If this second tunnel is started but does not traffic, we might have a problem NAT or routing.
Federico.
-
Error message - unable to find the proxy server - how can I solve this problem
When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.
Set not to use any proxy.
Firefox> Preferences > Advanced > network > setting > don't score no proxy
Maybe you are looking for
-
I can't the PDF files because it does not have enough memory, but I have 44 concerts in the system.
-
My computer has 4 GB of RAM installed, but in the manual said I could upgrade to 8 GB. There are two jacks for memory cards for this model. When I checked there is a memory card of 4 GB installed in one of the (black color) and the second (white) wer
-
KB973688 and KB954430 do not install. Windows Update loop on them. they install ever.
KB973688 and KB954430 do not install. Windows Update tries to install these two updates, but they never complete the installation. Tried to install KB954430 manually, but it would not install. Event Viewer event id 7023 windows module Installer s
-
MSE is considered "optional" update by Windows Update?
Windows Update is deemed updates of Microsoft Security Essentials definitions as "optional". AV defs are, IMO, critical - why Windows Update is not agree with me?
-
2 month old Inspiron 7568 start, completely dead battery, white screen, ok. Contacted support and sent it under warranty. They fixed it, it was returned. Now I realize there is no sound on the speakers, ok taken audio 3.5. Impossible to contact su