Invalid characters for a hierarchy validation

Similar Questions

• Invalid characters from Alias

  Hi all
  
  (Hyperion Planning 11.1.2.1)
  I'm looking for the list of invalid characters for the Alias of a generic dimension, sought the administration guide but could not find. Can someone tell me please the above-mentioned documentation? I have an alias that starts with "("et c'est être ramassé dans la validation.) "
  
  Any help much appreciated.
  
  Concerning
  
  Ed

  As the rules are also governed by essbase he should also follow the same restrictions as - http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_dbag/esb_restricted_names.html#esb_restricted_names1063037

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Invalid name for a new version error

  My application name has an apostrophe in it and in the oast, I had problems with up-to-date product information unless I removed the apostrophe. This has been fixed for a long time, but today I had a recurrence in a slightly different form.

  I tried to present an emergency fixed version this morning and could not get to the second page of the wizard, due to the following error:

  Name contains invalid characters

  I'm desperate to get the update processed so I changed the name of the application hoping that I could present the new version.  Well long story made short, the wizard again stopped name error in its tracks.

  I presented a report via the support portal form explaining all this. I hope someone from the RIM is looking at this forum and will light a fire under the support team. Well, I hope in any case. Are brand you there? Can you help me?

  On a whim, I tried again and the new version was accepted. I asked that they ignore the ticket for the name change, but if they are not, I guess I'll just submit another change when one is clear.

• Oracle 12 c client fail with one or several names of nodes contain invalid characters

  I tried to install 32-bit Client Oracle 12 c version 3 on my Windows 7 Enterprise 64-bit. I use 32-bit is because Visual Studio is a 32-bit application. The application of the compilation will be deployed on the server with 64-bit drivers. Sort failed to install the diligence carried out with:

  GLWB-11322: one or more node names "xxxx" contains one or more invalid characters.

  The name of the node contains alphanumeric characters and hyphens, so I don't know why it is not valid.

  Does anyone know of a workaround?

  Paul

  
  

  OK, the problem is resolved. The issue was due to the host name. At some point, we transition to windows 7 from XP, so they created the new virtual machine that were the old names with the suffix "-7". So if you have an XP VM to "vm-Dev-1234567", it would become "vm-Dev-1234567-7". "." Unfortunately, Active Directory has truncated the name of 15 characters, so we end up with "vm - Dev - 1234567 -", but the truncated character somehow confused the customer Oracle 12 c. The installer would have failed the prerequisite and say that this node is not valid. He said not invalid character '_', just ' "without the quotes.

  I rename my VM to the name without the '-7' at the end. After that, the customer Oracle 12 c Setup no longer stuck at the stage of system requirements and the installation was successful.

  Paul

• Error: Name of the Member has invalid characters, is too long or is empty

  Hello!

  I am trying to deploy the HFM application in 11.1.1.3 and receive the errors below.

  Error: Name of the Member has invalid characters, is too long or is empty

  Error: No child is specified for the parent/child pair

  Real

  
  

  Any idea?

  
  

  Thanks in advance!

  Sandeep Kumar
  

  Hi Sandeep

  I think you should post this question on the forum HFM, it is dedicated to FDM and FDMEE...

  You try to deploy from EPMA?

  What is a comma as the first character of the name of your Member?

  Julien

• DEU-00014: invalid value for the setting, "include".

  Hi, I need to do an export of paintings from a schema and a particular query executed will apply to all the specified tables in "INCLUDE = TABLE: '('TBL1', 'TBL2') IN' in the command expdp.»
  
  Now, I get the question in this setting INCLUDE. I have about 200 paintings to be included and I add this parameter INCLUDE in a separate parameter with all table names 200 file in Informatics and with the help of this parameter file in the expdp command.
  
  Error message I get:
  DEU-00014: invalid value for the setting, "include".
  
  When I use the same process for 2 tables, this works very well. I think that there is a limit to the number of characters that can be used in the INCLUDE parameter. If so, then how do I use expdp to select only those 200 tables of 500 paintings in my diagram. I'd appreciate any help on this. Thank you.

  Hello

  I'm sure that the limit is 4000 characters, but there are fairly simple workaround.

  Create the table my_tabs (a varchar2 (30));
  insert into my_tabs values ('your_table_name');
  Repeat this step for each of your 200 tables

  include = TABLE: "in ((SELECT from MY_TABS)) '"

  You may need to mess you with the quote, but the value you were using is just an expression. It is only by using a different expression.

  Dean

• ORA-01839: invalid date for the specified month

  Hello
  
  I don't know if this is the right place for posting this... but I got the following errors in my alert log file (10.2.0.1)
  
  Errors in the fichier.../bdump/xxx_j000_23928.trc
  ORA-12012: error on auto work 8888
  ORA-01839: invalid date for the specified month
  
  in the trace file:
  NAME OF THE ACTION: (AUTO_SPACE_ADVISORY_JOB) 2009-03-30 22:00:02.313
  NAME OF THE MODULE: (DBMS_SCHEDULER) 2009-03-30 22:00:02.313
  SERVICE NAME: (SYS$ USERS) 2009-03-30 22:00:02.313
  ID OF THE SESSION: (194,87) 2009-03-30 22:00:02.313
  2009-03-30 22:00:02.313
  ORA-12012: error on auto work 8888
  ORA-01839: invalid date for the specified month
  
  The problem is the date is not valid for the specified month, my question is how do I solve this problem. This is a newly created database.
  
  I have only 2 jobs (some from dba_jobs) and there is no 8888.
  
  2 jobs I have are:
  
  THE WORK INTERVAL WHICH
  1 + 1/240 sysdate unlock;
  trunc (sysdate) 2 + 7 + 3/24 dbms_stats.gather_schema_stats ('db_name');
  
  
  Please help. Thank you.
  
  Published by: user10427867 on March 31, 2009 12:00

  The work is probably assigned a group of windows, probably MAINTENANCE_WINDOW_GROUP. The task will run in this window. Try these queries.

  select schedule_name
  from dba_scheduler_jobs
  where job_name = 'AUTO_SPACE_ADVISOR_JOB';
  
  select next_start_date
  from dba_scheduler_window_groups
  where window_group_name = 'MAINTENANCE_WINDOW_GROUP';  -- or the value returned by the first query if different
  

  Since it is a work of Oracle supplied, I recommend you contact Oracle support. The trace file contains other useful information?

• File name includes one or more invalid characters.

  'File name includes one or more invalid characters.

  Looks like maybe a bug if the photos are not taken with the cam of the Atrix.

  FYI - https://supportforums.motorola.com/message/352799#352799

• Hi, when using windows live, when in the chat and write the other answers of the person, but all that shows is a load of alphanumeric characters, for example, 13223d95-6618-11e0-a907-00248136cc7b

  Hello

  When you use windows live messenger, when in the chat and I write, other responses of the person, but all that shows is a load of alphanumeric characters, for example, 13223d 95-6618-11e0-a907-00248136cc7b. No idea of that which is causing this happens or a repair?

  Thanks in advance.

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want.

  Link: http://windowslivehelp.com/product.aspx?productid=2

• When I press some keys on my ASUS netbook, I get 2 characters, for example, if I press a period, I get a semicolon and a period. Any suggestions?

  When I press some keys on my ASUS netbook, I get 2 characters, for example, if I press a period, I get a semicolon and a period.  Any suggestions?

  I have not rebooted - no help.  I removed the battery for one minute - no help.

  Hi Wesley,

  1 - is this happen only with a specific application or all applications?

  2. did you of recent changes on the system?

  Step 1:

  First check if the FN key is enabled. If so, then try to switch it off

  Step 2:

  You can try to perform a system restore and see if it helps.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following articles:

  System restore

  System Restore: frequently asked questions

  Step 3:

  If you still experience the problem, then try to uninstall and reinstall the keyboard drivers.

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the keyboard in the Device Manager.

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  SLO, you can check the Asus Web site and try to update the latest version of the keyboard drivers.

  ASUS support

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Error downloading: digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  Hello fellow sufferers!

  I am trying to download my first application at BB appworld. While trying to download the file * .bar, I get this error:

  Digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  What does this errormessage?

  It's my MANIFESTO. MF file:

  Archive-manifest-Version: 1.1
  Archive-created-by: BlackBerry Tablet OS Elf BAR Packager 1.3.1

  Package-Type: application
  The author of the package: -.
  Package name: de.helex.clipmanlite
  Package version: 1.0.2.0
  Package-Architecture: armle-v7
  Package-author-certificate hash: _QCY8j3bSpt-67mhJLED-4xZooXxA7vZBMu2MbHI97SYlh5aoRxaHi44Ie-WMfh9-AGPG2YnwlW7X-AJ-A7xPQ
  Package-author-Id: gYAAgEPQ7F7MvQXnpyTXcW_b9KQ
  Package-Id: gYABgFYDI7fyWoGVx88_tVwB_Ic
  Package-Version-Id: gYACgHvOOTEXtanI-HRmZlA82u8

  Application name: ClipManLite
  Application Description: Clipboard Manager
  Application version: 1.0.2.0
  Request-requires-system: Tablet OS/1.0.7.0
  ID of the application: gYADgFZI5L0DEfspLgVvaOJ8kK0
  Application ID-Version: gYAEgIravTIRSld3gfNygimA3qI

  Name of the entry Point: clipmanlite
  Entry point: QML_IMPORT_PATH = app/native/import QT_PLUGIN_PATH = native/app/plugins LD_LIBRARY_PATH = lib/native-app app/native/clipmanlite - blackberry - platformpluginpath ./app/native/lib/platforms platform
  Entry-Point-Type: Qnx/Elf
  Entry-Point-icon: native/icon.png
  Entry-Point-Splash-Screen: native/splashscreen.png
  Entry-Point-focus: auto
  Entry-Point-System-stocks: run_native

  Archive-asset-name: native/clipmanlite
  Archive-asset-SHA-512-Digest: EgIFzXisCdbgWHASq7sSPYjSDWRzzl77_hw-TYnopqUjV9JDbRORwzCruReZOG2iq3SQv-Yi50NcD7XPHqz_Jw
  Archive-active-Type: Qnx/Elf

  Archive-asset-name: native/icon.png
  Archive-asset-SHA-512-Digest: MFqIlfKgqTrhI3yZkGZyv0l1YUubJblUMc6mhcZuhJfktqX5x-NwfWL7m-McGoKUMjgCTbFBSW1e3voCcZoBGg

  Archive-asset-name: native/splashscreen.png
  Archive-asset-SHA-512-Digest: CNzXgezPb8oKHCJ_4Zqk2_Fb1D6tkMVGEn3mhPQFRD7REdRG0ZnELLdu0gkM1pVvyObc0bH2ouv84_QwJ7kuLg

  Archive-asset-name: native/lib/libQtCore.so.4
  Archive-asset-SHA-512-Digest: 9gnZ149YG3kPs8ZFbHoZ6kFrL5dj4yW40urXd-uZPDrif0zYMzI29TUsp794U4GBiQUXaKKlbZOWUqIZlEHI9A

  Archive-asset-name: native/lib/libQtGui.so.4
  Archive-asset-SHA-512-Digest: EgYpcFf7xItFiqQ_PDm8FFVFu5vdbIrg4-h2d3sB-3FfPuAlnZasR_UQ45yNxzZoIwowtdaNVstIvVZXd7j1AA

  Archive-asset-name: native/lib/libQtOpenGL.so.4
  Archive-asset-SHA-512-Digest: is9HkVzh6mFpVs0N7LkYCH1Aps3pt-Q20XHP37jLnLPnoME4kl3hl9sCkCU1XCm-PchfoX51GxjMS9wBkSuMgA

  Archive-asset-name: native/lib/libQtNetwork.so.4
  Archive-asset-SHA-512-Digest: pP6tPwXFGmFQnYTuHn80aFV7xh8pG4y6wOWIIvGGlp4UXl570Gq5W3lbOuCGtCQKyPwPLc7bVOPuK3Ur8hf6SA

  Archive-asset-name: native/lib/libQtDeclarative.so.4
  Archive-asset-SHA-512-Digest: W2wS_9_9Cqqqio2w6251fhFnxnQm4ZY2COFm5xQQVCQwcMCvly2KmGxVruZO2yc_WN65MGeEOvH4cAAt1rOznQ

  Archive-asset-name: native/lib/libQtSql.so.4
  Archive-asset-SHA-512-Digest: 7H8cJrn5yhG3p4K3G4oYO8XWr_D_AZcLD5T9Zfn6mc8lUiyJ4o6mXouXmFC9imoMeUmq4KsTVM2AdhZStXA7gQ

  Archive-asset-name: native/lib/libQtSvg.so.4
  Archive-asset-SHA-512-Digest: dJk9FYrRJGqPeaEG17LWTKC_ogV6Few2BzK4t-WlcXUg0MJxinKp5jigsCHzFm6SJiFJLHDj3jRS16bTV12qgQ

  Archive-asset-name: native/lib/libQtScript.so.4
  Archive-asset-SHA-512-Digest: 809rAuYFWIOxeJuNJcL63URoMKXz6NKrmKOfZZWDjPUVqTJkxL7tBr_joHZR-EVY1mSJ8wBbh64iB6YdbqTmUg

  Archive-asset-name: native/lib/libQtXmlPatterns.so.4
  Archive-asset-SHA-512-Digest: zVw6F43U2TKa3dbYosygRliRlhdNisb-sdBmzh6AgTyh9GlVCkLLBie781GpQLA-uOyKpDOoT5B6N8h4ulaCBw

  Archive-asset-name: native/lib/platforms/libblackberry.so
  Archive-asset-SHA-512-Digest: uEdFgiXdWMo3MV5szE5vn2EcVXxubMZl4e71PT4z614ONV2ZqcFKzf6CFGzV9mwQGlWKm5Jrra71I2fzASnurw

  Archive-asset-name: native/blackberry - tablet.xml
  Archive-asset-SHA-512-Digest: mzIshm0x0oBMW7T-SlYg5ywvgFSeeHSyx53kkvzaf - WQWDtkbxqqXDldjCQrvYv631_2Q6OCAiYOmZRoslsYg

  Any ideas what could cause this error?

  First I thought maybe it's because the same mistake: what to do if your Package ID was rejected by BlackBerry App World

  But the creation of a new element of product does not help with this problem.

  It is a native application of qml Qt. It does not store the files, need to no write access and uses only simple, free of components created 1.0 QtQuick with no additives. So, it should be the best portable application out of my small collection.

  Unfortunately I have no real device here since I, like many of you, to present one of my tablet at BB App World Applications, first to get a.

  Google was not my friend on this topic, so I hope someone has this kind of error message and could tell me what could bring it. Any kind of advice are welcome.

  Best regards

  HELEx (Ambassador of Qt)

  FYI, a new simpler command allows to sign the 1 step:

  BlackBerry-sign - storepass .bar

  P12 both RDK of passwords must be the same, but this measure will apply to both the two signatures. It should have the same results as the command that you run.

  Kind regards

• Invalid key for the specified state

  Re-install the lightscribe software: connect to screen (thin name / business very well / product key appears in the entrance to the screen.)  When I press on enter = error message - INVALID KEY for SPECIFIC STATE?    FROM WHAT I UNDERSTAND, IT MIGHT BE A STACK OVERFLOW?  How can I fix it?

  GH

  You should contact the developer (or computer mfr) lightscribe software.  We have no knowledge of their products.

• Drive error 'invalid' value for registry when opening PDF files.

  Original title: Hi,.

  I use windows 8 pro.

  When I try to open the PDF files.

  Drive does not work. That is, the invalid value for registry.

  Any suggestions?

  From the desk of
  Press the Windows key + R
  Type WSReset.exe and press OK

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 3:

  
  You can try to run Apps Troubleshooter

  Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Please use the following links as reference:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

• ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  I cloned database of MRC. (test for role transitions) and set up DR.

  I tried to set up with no default port.

  When I'm bouncing of the db, (stop and start), cannot connect to the db.

  SQL > startup nomount;

  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00132: error syntax or network name not resolved "LISTENER_STBYCRMS."

  > > tnsnames.ora

  LISTENER_STBYCRMS

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  STBY_CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = stbycrms)

  (UR = A)

  )

  )

  LISTENER_CRMS =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = GCD)

  (UR = A)

  )

  )

  ~

  > > listener.ora

  LISTENER11G =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  SID_LIST_LISTENER11G =

  (SID_LIST =

  (SID_DESC =

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = stbycrms)

  )

  )

  ADR_BASE_LISTENER11G = / u01/app/oracle

  * I have an entry to the file for local_listener pfile.

  * .db_name = "CRM".

  db_unique_name = stbycrms

  LOCAL_LISTENER = "LISTENER_STBYCRMS."

  Thank you

  Hello

  LISTENER_STBYCRMS (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  Is the above entry is correct according to the syntax?

  where give you "="?

  LISTENER_STBYCRMS = (Description = (Address = (Protocol = TCP (port = 1898))(Host=Neptune)))

  or

  LISTENER_STBYCRMS =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXx)(PORT = 1898))

  )

  )

  -Pavan Kumar N