Invalid KING
I encounter an error, I do not understand. I built a LabVIEW program using Vision, which will analyze the regions of interest on an image and give a histogram for each KING, as well as a histogram for the average of all the Kings. When you run this on my development of desktop PC, it works very well. When I run the present in the laboratory, on the PC, it will work on (which has the appropriate licenses) I get an error "invalid KING IMAQ Rectangle VI King" (Kings are all rectangles and analysis using the VI 'IMAQ light intensity histogram (Rectangle)', so I have to first convert the KING to a rectangle for this). In addition, no histogram is displayed for the average return on investment, however, they are shown without any problems for the individual Kings.
Personally, I think that it shouldn't be a problem to show how you extract a part of the image. But anyway you can tell me
1. Why do you use a return on investment to rectangle?
2 if I myself remember well I suggested you to use "Imaq select rectangle. You use?
3. you mentioned that you want to extract a King who is static, then why not use an extract from the imaq?
Tags: NI Software
Similar Questions
-
Error 1074395720 has occurred to IMAQ find circular Edge 3 IMAQ Vision: invalid KING.
Hello
I am writing a program to adapt to a circle of an image (from the avi), but when running the IMAQ find circular edge v3.vi I get the error message:
"Error 1074395720 occurred at IMAQ find circular Edge 3.
Possible reasons
IMAQ Vision: Invalid KING. "
I use the vi KING of construct IMAQ to set the return on investment and I am sure that the KING output is in a format suitable for the discovery of the IMAQ circular edge v3 vi.
I joined my program (Labview 2011)
Any thoughts?
Thank you very much
Rory
Hi Rory,
Welcome to the Forums of NOR.
«IMAQ find circular Edge 3' expects a return on investment for type 'Ring'.» There are a number of functions in labVIEW for the conversion of the type of return on investment as "IMAQ convert the KING to ring. However, as the circular edge VI find JUST does not ring but bounding box and other details as well, there is a strange solution to this problem.
Drop-down "IMAQ convert KING ring" and get the return on investment through. Drop-down and then "Convert ring to the KING" (Yes, really) and pass the output of who to "find the circular edge.
It is circular, strange workaround, but it seems to force the type of return on investment to go to the ring and so works.
Let me know if you have any other questions.
Thank you very much
-
the protection of the KING region in the image control.
I use the return on investment on an image rectangle.
As you well know, the KING can move or change the size by clicking and moving the mouse.
But when the user clicks a position outside the KING, the current KING will reset and disappeared from the image control.
Is there an idea on how to get information about the event or property to protect the KING?
(Region KING detects the manipulation of the mouse event).
I just wanted to keep, move or translate the present KING with the handling of the mouse.
My application must have an entry a consistent ROI in real time.
labmaster.
I just put extra code to check if the current KING is valid or not to cash the size of the table of the global rectangle.
Invalid KING means no size of table or the same position of x 1 and x 2 (for y, the same thing.) of the rectangle.
I know this isn't a perfect way to keep the KING, but it is OK for me virtually.
labmaster
-
Hello
I would like to choose a KING in an image and then use it to read the number on the LCD.
I have attached below the VI and an example of the image I want to use, could someone clarify why the VI does not work properly.
Thank you
Zied
Two things that you need to fix.
1. the value of the threshold must be suitable for the black levels in your images. 10 is probably a good value.
2. in case there is no figures displayed (in the tens place, for example), the search by index returns-1 (not found). You need to check if the index value< 0="" t/f,="" and="" if="" true,="" pass="" a="" zero,="" instead="" of="">
-
Hello
I tried to create a function that might return the type that is created on the outside.
So I wrote script below. until the function created it compiled successfully, but after that, when the data querying, we encountered error,
"ORA-22907: invalid CAST to a type that is not a nested table or VARRAY.
SQL> create table emp 2 ( 3 ename varchar2(200 byte), 4 mgr number, 5 employee_id number 6 ); Table created. SQL> insert into emp (ename, mgr, employee_id) 2 values ('king', 12, 1); 1 row created. SQL> insert into emp (ename, mgr, employee_id) 2 values ('clark', 12, 2); 1 row created. SQL> commit; Commit complete. SQL> create or replace type t_emp as object (ename varchar2 (200), mgr number, employee_id number); 2 / Type created. SQL> create or replace function f_emp return t_emp 2 is 3 type rc_emp is ref cursor; 4 r_emp rc_emp; 5 v_emp t_emp; 6 begin 7 open r_emp for select * from emp where rownum=1; 8 fetch r_emp into v_emp; 9 close r_emp; 10 return v_emp; 11 exception 12 when others then 13 dbms_output.put_line(dbms_utility.format_error_stack); 14 dbms_output.put_line(dbms_utility.format_call_stack); 15 dbms_output.put_line(dbms_utility.format_error_backtrace); 16 raise_application_error(-20001,sqlerrm); 17 end; 18 / Function created. SQL> show errors; No errors. SQL> select * from f_emp; select * from f_emp * ERROR at line 1: ORA-04044: procedure, function, package, or type is not allowed here SQL> select * from table(cast (f_emp as t_emp)); select * from table(cast (f_emp as t_emp)) * ERROR at line 1: ORA-22907: invalid CAST to a type that is not a nested table or VARRAY SQL>
Like this:
...
CREATE or REPLACE TYPE t_emp_array IS TABLE OF THE t_emp;
/
FUNCTION to CREATE or REPLACE f_emp RETURN t_emp_array
is
type rc_emp is ref cursor;
r_emp rc_emp;
v_emp_array t_emp_array: = t_emp_array();
BEGIN
R_emp OPEN for SELECT t_emp(ename,mgr,employee_id) FROM emp WHERE ROWNUM = 1;
collect the fetch r_emp in bulk in v_emp_array;
CLOSE R_emp;
Return v_emp_array;
exception
while others then
dbms_output.put_line (dbms_utility.format_error_stack);
dbms_output.put_line (dbms_utility.format_call_stack);
dbms_output.put_line (dbms_utility.format_error_backtrace);
raise_application_error (-20001, SQLERRM);
end;
/
SELECT *.
table (f_emp ());
a table function works with a table (nested table or varray)
HTH
-
Why do I get this message ArgumentError: Error #2015: invalid BitmapData.
ArgumentError: Error #2015: invalid BitmapData.
at flash.display::BitmapData/ctor()
at flash.display::BitmapData()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlasResource()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlas()
at com.king.flash.spaceland.texture::TextureManager/createDynamicAtlas()
at com.king.ragnarok.spaceland.atlas::DynamicAtlasFactory/createDynamicAtlas()
at com.king.stritz.juego::ProfilePictureLoader/load()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePictureWithSocialUser()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePicture()
at com.king.stritz.view.spaceland.diorama::DioramaPortraitsView/setUpCurrentUser()
at com.king.stritz.presenter.diorama::DioramaPortraitsPresenter/show()
at com.king.stritz.presenter.diorama::DioramaPresenterImpl/show()
at com.king.stritz.state.main::DioramaMainState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
at com.king.stritz.state.main::PerformanceCheckState/changeState()
at com.king.stritz.state.main::PerformanceCheckState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
to Function/PreloadingState.as$ 0:anonymous()
to Function/Assets.as$ 1:anonymous()
at com.king.ragnarok.spaceland.assets.zip::ZipAssetLoader/callback()
to Function/ZipAssetLoader.as$ 0:anonymous()
to Function/ImageDecoder.as$ 0:anonymous()
to Function / onComplete)
Hi Luetta,
Can you please share how you are initializing BitmapData in your AS code (also provide little detail of you app you use PNG or ATF)? Looks like the size of bitmapData is more than expected.
-Nimisha
-
Update fails with ORA-00904 invalid identifier
Hi all
I have problems of construction of an ' update '. Execute the following select statement,
ReturnsSELECT XREF.REGN_ID, XREF.COUNTY_NM, OWNER.CASE_OWNER_ID, OWNER.FORMER_AREA, OWNER.AREA, OWNER.COUNTY_NUMBER, OWNER.OFFICE FROM PS2_CASE_OWNER_SEYED OWNER, DWFSSD.TAFS_REGN_AREA_XREF_MART XREF WHERE (OWNER.AREA = XREF.AREA_ID(+)) AND (OWNER.OFFICE = XREF.OFFICE_CD(+) ) AND (OWNER.COUNTY_NUMBER = XREF.COUNTY_NUM(+))
I am trying to execute the following statement, "Update", update the PS2_CASE_OWNER_SEYED table.REGN_ID COUNTY_NM CASE_OWNER_ID FORMER_AREA AREA COUNTY_NUMBER OFFICE "1" "Alfalfa" "5008756" "1" "1" "02" "C" "1" "Alfalfa" "5008954" "1" "1" "02" "C" "1" "Beckham" "5008803" "1" "1" "05" "C" "1" "Beckham" "5008222" "1" "1" "05" "C" "1" "Beckham" "5008223" "1" "1" "05" "C" "1" "Beckham" "5008424" "1" "1" "05" "C" "1" "Beckham" "5008442" "1" "1" "05" "C" "1" "Beckham" "5008780" "1" "1" "05" "C" "1" "Beckham" "5008787" "1" "1" "05" "C" "1" "Beckham" "5008788" "1" "1" "05" "C"
The "Update" statement returns the following error:UPDATE ( SELECT OWNER.AREA, XREF.REGN_ID, XREF.COUNTY_NM FROM PS2_CASE_OWNER_SEYED OWNER, DWFSSD.TAFS_REGN_AREA_XREF_MART XREF WHERE (OWNER.AREA = XREF.AREA_ID(+)) AND (OWNER.OFFICE = XREF.OFFICE_CD(+) ) AND (OWNER.COUNTY_NUMBER = XREF.COUNTY_NUM(+)) ) SET OWNER.FORMER_AREA = OWNER.AREA, OWNER.AREA = XREF.REGN_ID, OWNER.COUNTY_NAME = XREF.COUNTY_NM;
Any ideas what's wrong with the update statement?ORA-00904: "XREF"."COUNTY_NM": invalid identifier
Thank you
SeyedHi, Seyed,
Here's a way to do this UPDATE:
UPDATE emp SET sal = sal * 1.05 , comm = NVL (comm, 0) + 500 WHERE deptno IN ( SELECT deptno FROM dept WHERE loc = 'DALLAS' ) ;
If you want to use an inline view, you can do this:
UPDATE ( SELECT e.sal , e.comm FROM emp e JOIN dept d ON d.deptno = e.deptno WHERE d.loc = 'DALLAS' ) SET sal = sal * 1.05 , comm = NVL (comm, 0) + 500 ;
Whatever it is, the emp table is left as you wish:
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ----- ------ --------- ----- ---------- ---------- ----- ------ 7782 CLARK MANAGER 7839 06/09/1981 2450 10 7839 KING PRESIDENT 11/17/1981 5000 10 7934 MILLER CLERK 7782 01/23/1982 1300 10 7876 ADAMS CLERK 7788 05/23/1987 1155 500 20 7902 FORD ANALYST 7566 12/03/1981 3150 500 20 7566 JONES MANAGER 7839 04/02/1981 3123.75 500 20 7788 SCOTT ANALYST 7566 04/19/1987 3150 500 20 7369 SMITH CLERK 7902 12/17/1980 840 500 20 7499 ALLEN SALESMAN 7698 02/20/1981 1600 300 30 7698 BLAKE MANAGER 7839 05/01/1981 2850 30 7900 JAMES CLERK 7698 12/03/1981 950 30 7654 MARTIN SALESMAN 7698 09/28/1981 1250 1400 30 7844 TURNER SALESMAN 7698 09/08/1981 1500 0 30 7521 WARD SALESMAN 7698 02/22/1981 1250 500 30
-
error message when try to sync the iPhone, "invalid response from the device?
What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?
-What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.
-
iPad does not connect due to an invalid response?
I just updated my iPad air to 10.0.2 and received this:
ITunes could not connect to the ipad "iPad", because an invalid response was received from the device. Aide said it's a problem of USB, it's using the same exact cable I was using all night with her, and I even tried 2 other new cables with the same result. Rebooted computer and iPad, the same thing. It was working fine until I upgraded to, but I have updated to ios 8.4 directly to 10.0.2 and I really want to go back if possible.
Thank you all in advance...
Hello. You need iTunes 12.5.1 to support iOS 10.
-
iTunes invalid response from the device
Thus, since updating my iPhone 6 to IOS10, I have been unable to sync with my mac. When I plug my phone I get the message of athis on my mac...
iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.
I click OK
I look at my phone it asks if I want to trust this computer. I click Yes. Nothing.
So I wait. Nothing. I disconnect and try again. Same thing. I tried all the USB ports on my mac. Same thing.
Search the forums here, looks like a common phenomenon when connecting to a PC, but not a mac.
Connection to a Mac Pro Tower
10.7.5
iPhone 6
Devices running iOS 10 require the latest version of iTunes, which requires OS X 10.9.5 or more. It's time to upgrade.
-
get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device
Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
-
IPhone will not connect to iTunes - "invalid response received from the device."
After years of work very well, I went to put some new music on my phone and all of a sudden got this message "iTunes could not connect to the iPhone 'IPhone of David Platts' because an invalid response was received from the device."?
I've tried different USB ports, different cables (some Apple official, some after market) and several reboots, but nothing works.
I'm 10.7.5 OSX and IOS 10 phone you.
Thanks for the help.
You have a problem.
It is good that you have told us you're OS x 10.7.5 (current is MacOS 10.12), because it is your problem.
iOS 10 requires iTunes 12.5.1 or later to communicate. iTunes 12.5.1 requres OS X 10.9.5 or later version.
It's (time to upgrade the operating system of your Mac spent).
-
Application failure: invalid statement 4
After upgrading to Mac OS Sierra, I get "4 the invalid statement" when running applications that worked on El Capitan (on MacBook Pro 2015). Different pages from 2009 indicate that the executable file runs a statement of unknown or not CPU supported. Other items show the incorrect return values. How is it possible for applications that work on the same machine under El Capitan?
Y at - it new security / firewall app from Sierra which could cause this? Anyone else seeing this?
Quote including "BREW" applications and programming tools (Haskell, cabal, maven)
Have you checked to see if there are any available updates for applications that are giving you problems?
-
Week old iPhone 7 displays "sim" invalid error
Week old 7 128 GB iPhone displays "invalid sim" error intermittently. Nothing in particular seems to make. Just shows up randomly. If I turned off and restart it solves for a while. I'm getting a couple of times a day now. Anyone else having this problem? How should I do? I intend to go back to the Apple Store where I had tomorrow.
This page can help you
If you receive an alert on the SIM card in your iPhone - Apple Support
-
After inserting the sim card it shows network and seems ok. but after awhile my iphone5 shows invalid sim. IM facing this problem for the last month and half. can anyone suggest me on this subject?
It could be the current SIM card, or it could be the settings of operating system or to the carrier.
Try going into settings > general > all. After a few seconds you will get a prompt to update if it is available.
If there isn't, I'll try to do a backup and restore then the device in iTunes to install a new copy of the software, then set it up as a new phone for a day to test it.
If after you restore the phone again to do, try to get a new SIM card from your operator.
If it's still doing with a new SIM card, it is material to the phone and you should get it looked at.
Maybe you are looking for
-
Battery won't charge on my Satellite A110
6 months ago my adapter stopped working. I replaced it with a universal which works well for some time. Then I had a problem.When I connect the adapter to the laptop the blue light indicating the power supply Burns ok. The battery light turns orange
-
When I video chat with my children, weather it is Skype or facebook, they can hear me but I can't hear them.
-
Hi, I got an error a couple of times when my phone began to start. The error message says that my PC has a problem with some fan (I forgot the number of specific fan) WARNING if I continues the start and using my PC it could be loss of data or even
-
Hello. Recently, I upgraded my HP Windows Vista Home Edition of Windows Vista Ultimate Edition HDX16 model (quite a 'new installation' upgrade.) Since then I've been doing a handful of drivers went unnoticed in the Device Manager. Keep in mind that t
-
Problems with Smartphones blackBerry icon for the latest email users deleting
Past users icon email still appeared to me, and I can't find out how to remove it, since this is not not active I can't get out of here any help for a newbie to bb?