KING of invalid LCD.
Hello
I would like to choose a KING in an image and then use it to read the number on the LCD.
I have attached below the VI and an example of the image I want to use, could someone clarify why the VI does not work properly.
Thank you
Zied
Two things that you need to fix.
1. the value of the threshold must be suitable for the black levels in your images. 10 is probably a good value.
2. in case there is no figures displayed (in the tens place, for example), the search by index returns-1 (not found). You need to check if the index value< 0="" t/f,="" and="" if="" true,="" pass="" a="" zero,="" instead="" of="">
Tags: NI Hardware
Similar Questions
-
I encounter an error, I do not understand. I built a LabVIEW program using Vision, which will analyze the regions of interest on an image and give a histogram for each KING, as well as a histogram for the average of all the Kings. When you run this on my development of desktop PC, it works very well. When I run the present in the laboratory, on the PC, it will work on (which has the appropriate licenses) I get an error "invalid KING IMAQ Rectangle VI King" (Kings are all rectangles and analysis using the VI 'IMAQ light intensity histogram (Rectangle)', so I have to first convert the KING to a rectangle for this). In addition, no histogram is displayed for the average return on investment, however, they are shown without any problems for the individual Kings.
Personally, I think that it shouldn't be a problem to show how you extract a part of the image. But anyway you can tell me
1. Why do you use a return on investment to rectangle?
2 if I myself remember well I suggested you to use "Imaq select rectangle. You use?
3. you mentioned that you want to extract a King who is static, then why not use an extract from the imaq?
-
Error 1074395720 has occurred to IMAQ find circular Edge 3 IMAQ Vision: invalid KING.
Hello
I am writing a program to adapt to a circle of an image (from the avi), but when running the IMAQ find circular edge v3.vi I get the error message:
"Error 1074395720 occurred at IMAQ find circular Edge 3.
Possible reasons
IMAQ Vision: Invalid KING. "
I use the vi KING of construct IMAQ to set the return on investment and I am sure that the KING output is in a format suitable for the discovery of the IMAQ circular edge v3 vi.
I joined my program (Labview 2011)
Any thoughts?
Thank you very much
Rory
Hi Rory,
Welcome to the Forums of NOR.
«IMAQ find circular Edge 3' expects a return on investment for type 'Ring'.» There are a number of functions in labVIEW for the conversion of the type of return on investment as "IMAQ convert the KING to ring. However, as the circular edge VI find JUST does not ring but bounding box and other details as well, there is a strange solution to this problem.
Drop-down "IMAQ convert KING ring" and get the return on investment through. Drop-down and then "Convert ring to the KING" (Yes, really) and pass the output of who to "find the circular edge.
It is circular, strange workaround, but it seems to force the type of return on investment to go to the ring and so works.
Let me know if you have any other questions.
Thank you very much
-
Under agents of launch systems, two elements are labeled as "invalid signature." What does that mean?
EtreCheck version: 2.9.12 (265)
Report generated 2016-05-02 20:12:13
Download EtreCheck from https://etrecheck.com
Running time 01:29
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Verify the signatures of Apple: enabled
Problem: Another problem
Description:
Computer crashes randomly and I have to force restart it.
MacBook Pro (retina, 13 inches, early 2015)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro12, 1
1 2.7 GHz Intel Core i5 CPU: 2 strands
8 GB RAM not extensible
BANK 0/DIMM0
OK MHz 4 GB DDR3-1867
BANK 1/DIMM0
OK MHz 4 GB DDR3-1867
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n/ac
Battery: Health = Normal - Cycle count = 202
Intel Iris 6100 graphics card
Color LCD 2560 x 1600
OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour
SM0256G SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) /: 249,78 go-go (126,83 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk0s2 250.14 GB Online
Broadcom Corp. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
/ Library/Extensions
[loading] com.intel.kext.intelhaxm (1.1.5 - SDK 10.9 - 2016-05-01) [Support]
com.spyresoft.dockmod.driver [no charge] (1.0 - SDK 10.11 - 2016-05-01) [Support]
/ System/Library/Extensions
com [no charge]. ZTE.driver.ZTEUSBCDCACMData (ZGDriver_MacV1.7 - 2016-04-05) [Support]
com.paceap.kext.pacesupport.master [no charge] (5.9.1 - 10.6 SDK - 2016-04-05) [Support]
[no charge] com.zg.driver.ZGHSUSBMassStorageFilter (ZGHSUSBMassStorageFilterDriver_MacV1.3 - 2016-04-05) [Support]
/System/Library/Extensions/PACESupportFamily.kext/contents/plugins
com.paceap.kext.pacesupport.Leopard [no charge] (5.9.1 - 10.4 SDK - 2013-02-01) [Support]
[no charge] com.paceap.kext.pacesupport.Panther (5.9.1 - SDK 10 - 1-2013-02-01) [Support]
com.paceap.kext.pacesupport.snowleopard [no charge] (5.9.1 - 10.6 SDK - 2013-02-01) [Support]
com.paceap.kext.pacesupport.Tiger [no charge] (5.9.1 - 10.4 SDK - 2013-02-01) [Support]
[operation] com.apple.Dock.plist (2015-08-22) -invalid signature!
[operation] com.apple.Finder.plist (2015-08-22) -invalid signature!
[loaded] 7 tasks Apple
[loading] 157 tasks Apple
[operation] 74 tasks Apple
[loaded] 43 tasks Apple
[loading] 159 tasks Apple
[operation] 87 tasks Apple
[loading] com.google.keystone.agent.plist (2016-04-26) [Support]
[loading] com.oracle.java.Java - Updater.plist (2015-08-28) [Support]
[loading] com.adobe.agsservice.plist (2015-10-15) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-15) [Support]
[loading] com.google.keystone.daemon.plist (2016-04-26) [Support]
[loading] com.intel.haxm.plist (2015-09-27) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-03-20) [Support]
[loading] com.malwarebytes.MBAMHelperTool.plist (2016-04-07) [Support]
[loading] com.microsoft.autoupdate.helpertool.plist (2016-04-17) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2016-02-19) [Support]
[loading] com.microsoft.office.licensingV2.helper.plist (2016-02-12) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2015-08-28) [Support]
[loading] com.surfeasy.ShieldService.plist (2016-02-12) [Support]
[loading] net.freemacsoft.LiteIcon.LIHelperTool.plist (2016-01-19) [Support]
org.eyebeam.SelfControl.plist [no charge] (2016-04-03) [Support]
[failure] com.macpaw.CleanMyMac3.Scheduler.plist (04 / 04/2016) [Support]
[operation] com.spotify.webhelper.plist (2016-04-25) [Support]
smcFanControl Application (/ Applications/smcFanControl.app)
Hidden HyperSwitch Application (/ Applications/HyperSwitch.app)
Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Application jAgent (~/Library/Application Support/ZTE/JoinMe_Mini/JAgent.app)
[ongoing] com.bahoom.HyperSwitch.50912
[ongoing] com.eidac.smcFanControl2.61472
[ongoing] com.etresoft.EtreCheck.119392
com.trendmicro.ATLoginItemHelper [loading]
[ongoing] com.trendmicro.DrCleaner.86752
[ongoing] com.yourcompany.JAgent.2592
net.freemacsoft.AppCleaner-[ongoing] SmartDelete
[loading] 403 tasks Apple
[operation] 180 tasks Apple
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]
QuickTime Plugin: 7.7.3 (2016-03-21)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]
Default browser: 601 - SDK 10.11 (2016-03-22)
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2016-04-26) [Support]
SharePointBrowserPlugin: 14.6.2 - SDK 10.6 (2016-03-21) [Support]
PepperFlashPlayer: 21.0.0.213 - SDK 10.6 (2016-04-07) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
JavaAppletPlugin: Java 8 updated 77 03 (2016-04-07) check the version of build
Ka-block! -David Graham & Josh Peek - http://kablock.com (2016-05-01)
Sanitize - Henry Lee - http://sanitize.us (2016-04-28)
Wipr - Giorgio Calderolla - http://giorgiocalderolla.com/ (2016-04-28)
Adamant - cocoa App - http://cocoaapp.com/adamant (2016-05-01)
Adguard AdBlocker - adguard - http://adguard.com (2016-04-28)
Hide & Seek - Jason Chander - http://roopc.net/hideandseek/ (2016-04-17)
RCDefaultApp (2016-01-16)
Flash Player (2016-04-15) [Support]
Java (2016-04-07) [Support]
Time Machine not configured!
6% WindowServer
kernel_task 2%
2% fontd
0% cloudpaird
Top of page process of memory: ⓘ
677 MB kernel_task
Mds_stores 131 MB
Dock 106 MB
Mdworker (7) 106 MB
Ocspd 66 MB
4.89 GB of free RAM
3.11 GB used RAM (1.18 GB being cached)
Used Swap 0 B
May 2, 2016, 20:09:26 self-test - spent
May 2, 2016, 03:42:33 PM/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2016-05-02-154233_ [reda DECT].cpu_resource.diag [details]
/Applications/BitdefenderVirusScanner.app/Contents/MacOS/BitdefenderVirusScanne r
See "Invalid Signature" in the EtreCheck report is not usually a cause for concern, but the fact that you have installed 3 CleanMyMac and BitDefender could be.
-
I have a LG LCD TV with a HDMI/DVI port
I want to buy the Apple TV to connect this TV, but not sure it will work. Does anyone have experience with the connection of a TV LCD from LG for Apple TV? I tried to Sony DVD Blu Ray player and he gave me an invalid format. There is a HDMI/DVI port, no other, so I don't know how to work the Apple TV?
Display the model number of your TV.
-
Invalid problem TV 40RL938G digital television service
Please advice.
TV Toshiba 40RL938G error invalid recurring service, the DTV signal via cable company UPC using CI card.
DTV countries setting - so I tried a different setting with the same result cannot use CZ - not supported connected via a cable.Thank you for your advice and help.
Jaroslav CZHello
You should choose the right country and region settings in the TV Setup menu.
In addition, he must choose between the antenna or cable.
Then, you can use the tuning mode and had the choice between DTV and ATV, DTV or ATV mode.
DTV are digital channel and ATV provides a list of analog channels._Note: _ if you have others selected for the field of countries in the system configuration menu and chose a tuning mode DTV, choose the broadcasting system ATV optimal (B/G, I, D/K or L).
The TV will start searching all digital television services and/or ATV available.
Once the search is complete, the Auto Tuning display services found.I also recommend the details in the user manual:
http://www.Toshiba-OM.NET/LCD/PDF/English/RL938-3240-English.PDF -
the protection of the KING region in the image control.
I use the return on investment on an image rectangle.
As you well know, the KING can move or change the size by clicking and moving the mouse.
But when the user clicks a position outside the KING, the current KING will reset and disappeared from the image control.
Is there an idea on how to get information about the event or property to protect the KING?
(Region KING detects the manipulation of the mouse event).
I just wanted to keep, move or translate the present KING with the handling of the mouse.
My application must have an entry a consistent ROI in real time.
labmaster.
I just put extra code to check if the current KING is valid or not to cash the size of the table of the global rectangle.
Invalid KING means no size of table or the same position of x 1 and x 2 (for y, the same thing.) of the rectangle.
I know this isn't a perfect way to keep the KING, but it is OK for me virtually.
labmaster
-
When I connect my Pavilion dv7 to the lcd TV LG with HDMI to the TV says "invalid format". The sound works. How can I get the TV to show what is on my screen? It worked fine until about 2 weeks ago.
I have already tried:
1 installation of the last Center ACTED catalyst
2. change the screen resolution
3. make the laptop is configured for double or projector display
4. how to get the latest graphics driver ACTED
5. turn off the TV and laptop and reboot before and after having connected an HDMI cable.
It is a laptop problem, not a problem of TV. The TV is grateful that it is connected to the laptop (if I use F4 to return to the display only, the message "invalid format" TV changes to 'no signal'.)
Hello
What is the native resolution of the TV? Please check this:
http://oracleappstechnology.blogspot.com.au/2008/12/invalid-format-on-HDTV-on-connecting.html
Kind regards.
-
ORA-22907: invalid CAST to a type that is not a nested table or VARRAY. Typed collection function
Hello
I tried to create a function that might return the type that is created on the outside.
So I wrote script below. until the function created it compiled successfully, but after that, when the data querying, we encountered error,
"ORA-22907: invalid CAST to a type that is not a nested table or VARRAY.
SQL> create table emp 2 ( 3 ename varchar2(200 byte), 4 mgr number, 5 employee_id number 6 ); Table created. SQL> insert into emp (ename, mgr, employee_id) 2 values ('king', 12, 1); 1 row created. SQL> insert into emp (ename, mgr, employee_id) 2 values ('clark', 12, 2); 1 row created. SQL> commit; Commit complete. SQL> create or replace type t_emp as object (ename varchar2 (200), mgr number, employee_id number); 2 / Type created. SQL> create or replace function f_emp return t_emp 2 is 3 type rc_emp is ref cursor; 4 r_emp rc_emp; 5 v_emp t_emp; 6 begin 7 open r_emp for select * from emp where rownum=1; 8 fetch r_emp into v_emp; 9 close r_emp; 10 return v_emp; 11 exception 12 when others then 13 dbms_output.put_line(dbms_utility.format_error_stack); 14 dbms_output.put_line(dbms_utility.format_call_stack); 15 dbms_output.put_line(dbms_utility.format_error_backtrace); 16 raise_application_error(-20001,sqlerrm); 17 end; 18 / Function created. SQL> show errors; No errors. SQL> select * from f_emp; select * from f_emp * ERROR at line 1: ORA-04044: procedure, function, package, or type is not allowed here SQL> select * from table(cast (f_emp as t_emp)); select * from table(cast (f_emp as t_emp)) * ERROR at line 1: ORA-22907: invalid CAST to a type that is not a nested table or VARRAY SQL>Like this:
...
CREATE or REPLACE TYPE t_emp_array IS TABLE OF THE t_emp;
/
FUNCTION to CREATE or REPLACE f_emp RETURN t_emp_array
is
type rc_emp is ref cursor;
r_emp rc_emp;
v_emp_array t_emp_array: = t_emp_array();
BEGIN
R_emp OPEN for SELECT t_emp(ename,mgr,employee_id) FROM emp WHERE ROWNUM = 1;
collect the fetch r_emp in bulk in v_emp_array;
CLOSE R_emp;
Return v_emp_array;
exception
while others then
dbms_output.put_line (dbms_utility.format_error_stack);
dbms_output.put_line (dbms_utility.format_call_stack);
dbms_output.put_line (dbms_utility.format_error_backtrace);
raise_application_error (-20001, SQLERRM);
end;
/
SELECT *.
table (f_emp ());
a table function works with a table (nested table or varray)
HTH
-
Why do I get this message ArgumentError: Error #2015: invalid BitmapData.
ArgumentError: Error #2015: invalid BitmapData.
at flash.display::BitmapData/ctor()
at flash.display::BitmapData()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlasResource()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlas()
at com.king.flash.spaceland.texture::TextureManager/createDynamicAtlas()
at com.king.ragnarok.spaceland.atlas::DynamicAtlasFactory/createDynamicAtlas()
at com.king.stritz.juego::ProfilePictureLoader/load()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePictureWithSocialUser()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePicture()
at com.king.stritz.view.spaceland.diorama::DioramaPortraitsView/setUpCurrentUser()
at com.king.stritz.presenter.diorama::DioramaPortraitsPresenter/show()
at com.king.stritz.presenter.diorama::DioramaPresenterImpl/show()
at com.king.stritz.state.main::DioramaMainState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
at com.king.stritz.state.main::PerformanceCheckState/changeState()
at com.king.stritz.state.main::PerformanceCheckState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
to Function/PreloadingState.as$ 0:anonymous()
to Function/Assets.as$ 1:anonymous()
at com.king.ragnarok.spaceland.assets.zip::ZipAssetLoader/callback()
to Function/ZipAssetLoader.as$ 0:anonymous()
to Function/ImageDecoder.as$ 0:anonymous()
to Function / onComplete)
Hi Luetta,
Can you please share how you are initializing BitmapData in your AS code (also provide little detail of you app you use PNG or ATF)? Looks like the size of bitmapData is more than expected.
-Nimisha
-
Update fails with ORA-00904 invalid identifier
Hi all
I have problems of construction of an ' update '. Execute the following select statement,
ReturnsSELECT XREF.REGN_ID, XREF.COUNTY_NM, OWNER.CASE_OWNER_ID, OWNER.FORMER_AREA, OWNER.AREA, OWNER.COUNTY_NUMBER, OWNER.OFFICE FROM PS2_CASE_OWNER_SEYED OWNER, DWFSSD.TAFS_REGN_AREA_XREF_MART XREF WHERE (OWNER.AREA = XREF.AREA_ID(+)) AND (OWNER.OFFICE = XREF.OFFICE_CD(+) ) AND (OWNER.COUNTY_NUMBER = XREF.COUNTY_NUM(+))
I am trying to execute the following statement, "Update", update the PS2_CASE_OWNER_SEYED table.REGN_ID COUNTY_NM CASE_OWNER_ID FORMER_AREA AREA COUNTY_NUMBER OFFICE "1" "Alfalfa" "5008756" "1" "1" "02" "C" "1" "Alfalfa" "5008954" "1" "1" "02" "C" "1" "Beckham" "5008803" "1" "1" "05" "C" "1" "Beckham" "5008222" "1" "1" "05" "C" "1" "Beckham" "5008223" "1" "1" "05" "C" "1" "Beckham" "5008424" "1" "1" "05" "C" "1" "Beckham" "5008442" "1" "1" "05" "C" "1" "Beckham" "5008780" "1" "1" "05" "C" "1" "Beckham" "5008787" "1" "1" "05" "C" "1" "Beckham" "5008788" "1" "1" "05" "C"
The "Update" statement returns the following error:UPDATE ( SELECT OWNER.AREA, XREF.REGN_ID, XREF.COUNTY_NM FROM PS2_CASE_OWNER_SEYED OWNER, DWFSSD.TAFS_REGN_AREA_XREF_MART XREF WHERE (OWNER.AREA = XREF.AREA_ID(+)) AND (OWNER.OFFICE = XREF.OFFICE_CD(+) ) AND (OWNER.COUNTY_NUMBER = XREF.COUNTY_NUM(+)) ) SET OWNER.FORMER_AREA = OWNER.AREA, OWNER.AREA = XREF.REGN_ID, OWNER.COUNTY_NAME = XREF.COUNTY_NM;
Any ideas what's wrong with the update statement?ORA-00904: "XREF"."COUNTY_NM": invalid identifier
Thank you
SeyedHi, Seyed,
Here's a way to do this UPDATE:
UPDATE emp SET sal = sal * 1.05 , comm = NVL (comm, 0) + 500 WHERE deptno IN ( SELECT deptno FROM dept WHERE loc = 'DALLAS' ) ;If you want to use an inline view, you can do this:
UPDATE ( SELECT e.sal , e.comm FROM emp e JOIN dept d ON d.deptno = e.deptno WHERE d.loc = 'DALLAS' ) SET sal = sal * 1.05 , comm = NVL (comm, 0) + 500 ;Whatever it is, the emp table is left as you wish:
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ----- ------ --------- ----- ---------- ---------- ----- ------ 7782 CLARK MANAGER 7839 06/09/1981 2450 10 7839 KING PRESIDENT 11/17/1981 5000 10 7934 MILLER CLERK 7782 01/23/1982 1300 10 7876 ADAMS CLERK 7788 05/23/1987 1155 500 20 7902 FORD ANALYST 7566 12/03/1981 3150 500 20 7566 JONES MANAGER 7839 04/02/1981 3123.75 500 20 7788 SCOTT ANALYST 7566 04/19/1987 3150 500 20 7369 SMITH CLERK 7902 12/17/1980 840 500 20 7499 ALLEN SALESMAN 7698 02/20/1981 1600 300 30 7698 BLAKE MANAGER 7839 05/01/1981 2850 30 7900 JAMES CLERK 7698 12/03/1981 950 30 7654 MARTIN SALESMAN 7698 09/28/1981 1250 1400 30 7844 TURNER SALESMAN 7698 09/08/1981 1500 0 30 7521 WARD SALESMAN 7698 02/22/1981 1250 500 30 -
error message when try to sync the iPhone, "invalid response from the device?
What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?
-What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.
-
iPad does not connect due to an invalid response?
I just updated my iPad air to 10.0.2 and received this:
ITunes could not connect to the ipad "iPad", because an invalid response was received from the device. Aide said it's a problem of USB, it's using the same exact cable I was using all night with her, and I even tried 2 other new cables with the same result. Rebooted computer and iPad, the same thing. It was working fine until I upgraded to, but I have updated to ios 8.4 directly to 10.0.2 and I really want to go back if possible.
Thank you all in advance...
Hello. You need iTunes 12.5.1 to support iOS 10.
-
iTunes invalid response from the device
Thus, since updating my iPhone 6 to IOS10, I have been unable to sync with my mac. When I plug my phone I get the message of athis on my mac...
iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.
I click OK
I look at my phone it asks if I want to trust this computer. I click Yes. Nothing.
So I wait. Nothing. I disconnect and try again. Same thing. I tried all the USB ports on my mac. Same thing.
Search the forums here, looks like a common phenomenon when connecting to a PC, but not a mac.
Connection to a Mac Pro Tower
10.7.5
iPhone 6
Devices running iOS 10 require the latest version of iTunes, which requires OS X 10.9.5 or more. It's time to upgrade.
-
get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device
Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
Maybe you are looking for
-
Is the Migration Wizard write in any newspaper?
When you migrate the data, is the migration wizard save anywhere (the console log) how it happened and whether or not it was successful? I did a migration during the night operation, and when I arrived, the computer was switched off (power off). I ne
-
arduino interface toolkit installation
Hello everybody I want to install the toolkit interface arduino, but when I do that through vipm I face this error any help a cane me?
-
Need help to create a rule to monitor the "DSDeviceTotalLatency" under "VMWDatastore".
Hello all, I am very new to vFoglight and tasked to create a rule to control the property 'DSDeviceTotalLatency' of type 'VMWDatastore' topology. Looking at existing rules, I see that I need to write a mini script on the tab 'Conditions and Actions
-
Campus Manager and member of the cluster switches
Hello I have several groups defined, all switches (commanders and members) are in the DCR with their own IP address and are managed by the RME and DFM as a stand-alone hosts. In Campus Manager, only commanders are shown, I tried to put the members in
-
BlackBerry Storm 2 Smartphone - keyboard does not!
In Blackberry Messenger, the keyboard does not appear on the Storm 2. When you are in a group discussion or individual cats the keyboard does not appear when you click inside the text box or choose to see the keyboard in the menu. I heard this from