investigation of cable

Similar Questions

• Investigation of cable for notebook in Puerto Vallarta

  What cables / converters do I need to connect to my TV.

  I have a Presario CQ56 Notebook PC product number: LL921EA #ABU.

  My TV is a SONY KV - 32DS60U Trinitron has:

  SCART, used by set-top box and DVD player

  video input phono jack,

  audio-phone entries intakes,

  Input-4 s video DIN pin

  headphone jack.

  I have also one discover you the box (TALKTALK) which has a HDMI and USB plug.

  Thanks for looking, hope you can help

  Lorraine

  I bought a

  • LEICKE KanaaN PC VGA to TV Composite video RGB Converter + SCART + 3.5 mm Jack adapter...
    Sold by Leicke Germany distributor

  £13.99 from Amazon.co.uk
  

• Satellite X 200 SLI falls down when the HDMI cable is connected

  Hello world

  I'm very sad about this. You just bought a new brand Toshiba x 200 SLI and I get a crash (blue screen on Vista) when I plug the HDMI on my Philips Full HD TV.

  I did not almost any update, but still, this shouldn't happen on arrival!
  Clues?

  Many thanks for any help on this!

  Hmmm this error is known to me, but unfortunately it is not easy to tell what's exactly wrong or what causes this problem.

  Sometimes this BSOD could be linked to the issue of driver/software, but the last time I received this message on my 5 year old laptop and finally I discovered that one of my modules of memory was defective!

  However, this laptop was equipped with two GPU chips then perhaps there could be something wrong who knows?  :|

  But it s very strange that in this case using the HDMI port to my knowledge only this satellite X 200 series are supported by a standard HDMI V1.2 (up to 1080i).
  Did you use the right cable?

  As you can see an investigation is necessary to locate the cause of the error.

  If there is something wrong with the hardware I would recommend contacting the ASP in your country in order to clarify this strange issue.

  Good luck

• No internet connection with C6300 only cable modem/router - No. Ethernet cable plugged

  About once or twice a week I wake up my desktop PC and see an icon (bottom right) which indicates that I have no internet connection. When I run the troubleshooter network (right-click on the icon) it says to plug in my ethernet cable. I replaced the cable with another know good cable, but the problem continues to return (though intermittently). If I unplug the ethernet cable from the port of my C6300 Netgear and plug it back in the same or another port, the internet connection is restored. I'm on Windows 10 edition 64 - bit OS on my desktop tower PC (Dell). My internet provider is Cox Communications through their cable with up to 100 Mbps of speed. My Netgear firmware version is V1.02.20 to help you can provide me to solve this problem would be appreciated.

  Well, it has been a few weeks of performance without error since I replaced the Netgear C6300. So I close this investigation as "FIXED."

• Investigation of Wal-Mart instead of Internet Explorer

  July 13, 2011 I tried to get INTERNET EXPLORER on my computer so that I would be able to discuss with Time Warner Cable.  I had problems with my computer and IE was one of several Internet sites, they used.  I tried two times to connect, but whenever I tried, I got a survey by Wal-Mart, not my favorite company. They had three offers to complete this rose, which was a credit of $1000.00 at Best Buy.  I thought that WOW, why not.  Try to fill in this questionnaire, I realized it was the same investigation, I had done once before.  These people, a sort of diabetic or medical supply (safe) club would fail at the end of this questionnaire until I gave them permission to call me.  Not wanting to let this happen again, I closed this site and got angry with Microsoft.  It would have been nice to spend $ 1000.00 at Best Buy.  It would also be nice to connect with Time Warner Cable.  Instead, I got involved with a scam, which makes feel me like a fool, I'm not.

  In the future, it would be nice to not deal with this interruption, the next time I try to use INTERNET EXPLORER.  Please tell me how has escaped this problem in the future.  In addition, if an owner Microsoft is around, could they give me credit at Best Buy?  I guess you don 't have to answer this question.
  Thank you.

  Looks like your system of malware infection.

  When you use your browser to go to a place and you end up somewhere else, it is a sign of "browser hijacking".

  This is due to lack of Microsoft it's usually fault someone else to leave their system to be infected by malware, or the fault of your current antivirus/antimalware software that has not failed to protect your system (and probably last).  It does not mean that you are a fool - you just have to take better precautions and jack your skepticism of a few notches when you are on the Internet.

  These problems are very common when you "fall for her" (the plan) and not particularly difficult to solve.

  It is difficult to prescribe the right solution when your system knows nothing, but that's the way they choose to run MS Answers forums.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.   Really, I can't imagine how things could be worse here.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Buying a new wireless router that connects to the internet by cable with some hardware ports.

  I bought a WRK54G in 2004.  In the last six months, I bought two notebooks for my daughters.  My family has added four Android smartphones in the 45 days.  Our Wired internet connection come off the router wireless on our office is very frequently abandon its connection.  Seems one of the smartphones is ripped from the INVESTIGATION period.  Does make sense?

  Pulling IP address - you mean there is a conflict between the IP address of the PC cable to a wireless device?

  If this is the case, I suggest that you apply static I have. Here is a guide I've seen back on how to do: assign a static on a wired computer IP address

  Or if you are watching a fall on the computer because you have introduced new wireless devices in your network?

• Ethernet, says "cable disconnected".

  Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

  Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

• Apple TV with no cable?

  If I disconnect the cable tv, Apple TV will work?

  No. a HDMI cable is necessary and one internet connection.

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• do not connect not lightning cable

  All cable brightening, Apple or others, I use to connect to my iPhone 6, I have to move the insert head into the receptacle of the iPhone so he could load, usually push it again.  He then releases and I push it again to connect to the load or on my Mac.  Is this a defect in the receptacle for iPhone 6plus or are there other reasons?

  Thank you

  Stuart

  Hello

  Follow the steps here, including check for any debris loading port and/or contact our Apple support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

• How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

  Hello

  How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

  You can network or target mode a mac computer

  OS X Lion mountain: connect to shared computers and servers for files on a network

  Share files between two computers with target - Apple Support disk mode

  However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• When I plug it in the optical adapter and cable for Mac book and the receiver no sound?

  Trying to play digital sound with an optical cable to my Mac Book Pro to a HK integrated amplifier.

  No sound.

  Any ideas?

  What output is selected in system preferences > sound > output?

  Optics even figure?

• iPhone is as a replacement for cable inet?

  I currently have the following:

  cable Internet > > > > > > netgear n600 cable modem > > > > > > > > wifi in condo...

  I would like to replace my internet cable with my iphone of themselves with data unlimited gives me the following...

  unlimited internet data via iphone is > > > > > > netgear n600 cable modem > > > > > > > > > > wifi in condo...

  is there a way for me to do?

  No way to do it, but if your business provides access and use of the Hotspot of the phone, you can use it to provide internet service via wi - fi on the hotspot. However, the carrier must support the use of the Hotspot feature. You can not connect the iPhone to a modem to provide internet services.

  It also means that the phone must be in the location of the others get a wi - fi connection to this place.

• How to connect an external device via an Ethernet cable with iPad Air?

  I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

  LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

  You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications