IOM pinning via the port-channel
Hello
It seems to me that, with UCS manager 1.4 and higher, it is possible to setup the pinning of the IOM through the port-1-channel.
I couldn't find any configuration guide for this kind of configuration.
Can you help me or inform me on this subject?
Thanks in advance.
Nicolas.
Hi Nicolas,.
+ The feature is only available with the 2.0 and 2.0 material, i.e. a combination of FI and IOM 22xx 62xx.
the option is available on the same page as the page of chassis discovery strategies.
-> Hardware tab select hardware-> policies-> global Polocies-> preferences to group link (right)
. / Afonso
Tags: Cisco DataCenter
Similar Questions
-
See the bandwidth for the Port-Channel on Powerconnect &; Force10
Reference Dell dear community,
Y at - it a command CLI or GUI to see how much bandwidth result after having done a port channel in some port Powerconnect and Force10? Suppose we have 4 port 1 Gb and do 4 ports with 1 port-channel. So actually in this channel port have a bandwidth of 4 GB.
In Cisco, with the command show interface port-channel 1, we get the result
switch #sh po int 1
Port-channel 1 is up, line protocol is up (connected)
Material is EtherChannel, address is 0064.4026.739a (bia 0064.4026.739a)
MTU 1500 bytes, BW 4000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
KeepAlive set (10 sec)
Full duplex, 1000 Mbps, link type is auto, media type is unknown
input stream control is turned off, output flow control is not supported
Members in this channel: Gi0/1 Gi0/2
Type of the ARP: ARPA, ARP Timeout 04:00
Last entry of 00:00:00, 00:04:48 output, output hang never
Final cleaning of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0
Strategy of queues: fifo
Output queue: 0/40 (size/max)
5 minute input rate 2000 bps, 3 packets/s
5 minute output rate 2000 bps, 3 packets/sBut if we do this command on Powerconnect, the just result inform port that starts from the port-channel.
Reference Dell #show interfaces port-channel 1 short
Ch-Type Hash Type Min-links Channel ports local FRP
------- ----------------------------- -------- --------- --------- ---------
PO1 Active: Static disabled people article gi1/0/1, gi1/0/2 7 1 article
Item in gi1/0/3, item in gi1/0/4Type of hashing algorithm
1 - the source MAC, VLAN, EtherType, source module and port Id
2 - destination MAC, VLAN, EtherType, module source and port Id
3 - source IP and TCP/UDP source port
4 - destination IP and destination TCP/UDP port
5 source/Destination MAC, VLAN, EtherType, MODID/source port
6 source/Destination IP and port TCP/UDP source / destination
7 - improved hash modeCan you help us find the answer?
Thank you
Kind regards
Aziz
The PowerConnect switches do not have the ability to show as much detail as the Force10 can. The RMON tables have an interface use %, what may be the closest we can do on the PowerConnect switch.
#show rmon statistics
I've seen some monitoring software which was able to question the switch via SNMP and get some information of bandwidth. However, this can be a bit inconsistent, according to which switch and what software is used.
The MIBs/OID can be downloaded with the software switch.
http://www.Dell.com/support/home/us/en/rc959303/products/ser_stor_net/networking/net_fxd_prt_swtchs
-
Access to the network of a device ethernet via the ports of the router.
I was wondering if someone can help me with a router configuration. I have an ethernet device, a built-in Digi Connect me stack ethernet. I put the IP, subnet, gateway, etc. on this device. It has a serverver web and telnet and FTP features. What I want to do, this is the device connected to a WRT54GS router to one of the ports on the back. Then I want to connect internet routers connecting to my local network. On the LAN, I have a PC I want to use to access the web page of the Digi device through the router. The LAN has affected the PC an IP address of 3.11.201.33 and assigns the router IP Internet of 3.11.201.32. The PC is set to dynamically set an IP address. I have configured the Digi device to have an IP address of 192.168.1.100. I want to open a web page on the PC and connect a digi device. I can't get this to work. I tried to add the IP address of the device Digi to the DMZ on the router, but that did not help. How can I get from the PC via the LAN, through the router, on the port that is connected to the Digi? Any help is apprecieated!
Outgoing FTP for multiple devices behind the router need not any special installation... you will not need to pass all the ports for that.
You can port forward more than a device with the stock firmware digi... I just forgot how port forwarding 'niche roles' it is on the page... the WRT54G V5 has 10, so assuming that no other device in transmitted port, you should be able to forward the ports ftp and telnet for 5 devices.
-
Total for the port-channel when speed config speed 1000-nexus5548?
Hello world.
now I connect cisco 6509 and nexus 5548up using two link of 1000M and I want the two link port-Channel binding.
5548up port 10GE port cisco 6509 is 1GE, I config speed 1000 in nexus5548 ethernet port, and I find
the speed 1000 order auto config interface port-channel, so I would like to know the total speed in this channel port
is 1000M and 2000M when port-channel speed config 1000? I appreciate your help!
the topology like this:
1000M
--------------------------------------------
6509 port-channel speed 1000M nexus5548UP
----------------------------------------------
1000M
Hi again
The speed of the links and portchannel is 1000M but the bandwidth of the portchannel is 2000M
-
How to run the Xbox 360 via the port monitor on Qosmio G20
I just bought an Xbox 360 on eBay with a VGA cable which must connect the console directly to the port external monitor on my Qosmio, theoretically allowing me to use the screen on my laptop as screen for my video games.
I'm just a little worried that this port at the back of my Qosmio is technically to connect another monitor, not an input device, so it will work? And if so, how do I do?
I intend to spend a little time DIY autour with it when the console gets, but I guess it should be as simple hanging everything and then do it through media library or even simply initialize the TV itself rather than with the laptop everything?
Ideas, ideas, tips or advice (especially if you did before or know someone who has) would be appreciated.
A similar topic has already been discussed here in the forum. I recommend you research a bit.
XBOX
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11183&MessageID=40470
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15102&MessageID=55091XBOX 360
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9575&MessageID=33794 -
Portege M200: big screen via the port replicator
I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!
What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)
I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.
One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.
Can anyone help?
Hello
Well the Tecra9100 is not a Portege M200. Are completely different books.
The M200 protected does not support these interfaces.
This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.The following ports are supported and can be used:
Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted. -
Can I stop/start of my Wired main WRT54G wireless and always send the signal through a WAP browser & directional external antenna plugged into the hub?
How to allow only my own devices to use my bandwidth?
Using WPA password on WRT hub.
Drive Blu - Ray and AT & T Microcell Tower allow other titles-WPA2...?
Can I block the antenna attached to the main hub of sought but allow the port to send signals at access point?
Shields of aluminum foil over the main router antenna would cease its output signal? (if I remove them to allow the occasional portable navigation)
If you want, you can disable the feature on your primary router WRT54G wireless and use WAP to send the wireless signal.
Open the router configuration page and go to the Wireless tab, change the mode of network to people with reduced mobility. Save the settings.
If your wireless network is secure only your wireless computer can connect to the wireless network and use the bandwidth. So, make sure your wireless network secure.
Consult the manual for your Bluray and AT & T Tower and see if they take in charge WPA2.
-
Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U
Hi all
I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.
I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.
I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.
Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.
Thank you
Liga
Hello
I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
Not 2 simultaneously.I could be wrong, and you should easily be able to check it out - use only 1 at a time.
First, then the other.
If the two works when used alone, then my suspicion is right.I hope this helps!
TOm BR
-
Ive typed my question in the title
Since this thread created before 2 years I suggest you start your own, new thread on YOUR specific problem this will help you avoid confusion (and permanent damage to your computer).
-
Cannot sync to the device via the serial port
I have to read the data with a DSP associated with an EKG. For this I need 5 bytes (0x00 0x80 0x00 0x80 0x00) in a specific order that are sent through the port every second. I followed the data sent via the port and these 5 bytes are actually get received, however I havnt managed to find with my VI. I tried many different ideas without success and maybe Im doing something wrong. My latest attempt uses a waiting on event so I won't miss all the data. Ideas? See what I'm missing?
I'd appreciate any help!I think you are using the wrong function. You use Match true/false String. Said context-sensitive help "examine beginning of string to see if it matches the true or false string. This function returns a Boolean TRUE or FALSE value in the selection, depending on whether the string is true or false string. "Well, suppose that the string isn't everything at the beginning, but as another byte in front of her? It will not find the search for string. And the wiring of the same search in True and False are strange because if it is found, then it is both true and false at the same time.
You should use search and replace or search/Split string to determine if and where the search string is inside the largest chain. (I would take research/Split). If the string is not found it returns-1, otherwise it returns the location of the string. And it has the advantage of any return after the game you could feed in the shift register for a search on the next iteration.
-
I use a DELL Studio 15 laptop computer. When I try to copy a single file (for example: size of 1 GB) hard drive to any external memory device (for example: USB key or external hard drive) via the port USB, the copy process takes several hours to complete. I have checked the viruses using McAfee Antivirus, but could not find. Can someone suggest me a solution?
Hello
· Were there any changes made to your computer before this problem?
Step 1: Format the external device to the NTFS format and check if the problem persists.
See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format
-
connecting to the port Series 9 pins
I have Vista Business. I use a scanner that uses a serial connection. He has always worked in XP and I couldn't use hyoperterminal 0 test the. Now, there is no test for the port. I can't get the data via the port and I'm not familiar with telnet or knowledge if we can test the port. My port may be blocked? I truned disable the firewall and no luck. I place the receiver program as a program exception in the firewall, but the digitizer is what sends the data to the port not the software on the system.
Any ideas?
Hello Frank Gregg,.
· The digitizer is displayed in Device Manager when you connect?
· You have the drivers installed for the scanner?
· Who is the manufacturer of your scanner?
· What exactly are you using the digitizer for?
· What is the name of the program that you use to perform the test?
I suggest you contact the manufacturer for the digitizer get the drivers to connect with Vista.
If the device shows working in Device Manager then you can try to perform the test for the ports.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
-
Problems with an external monitor with the Port Replicator III and M100
Hey all.
I just returned from a trip where I took my laptop. Plugged into the Port Replicator port, started and everything was fine. Then after an hour or two, the monitor stopped receiving a signal. I repositioned the laptop and everything was good again. He then loses signal once again, and I was not able to get a signal via the port replicator since.
The monitor works fine through the hole at the rear of the M100.
I checked the pins on the Port Replicator port and portable, none folded and tried to clean any dust etc. Still no signal to the monitor.
Someone has ideas of how to do to solve this problem?
Jamo
Hello
The Toshiba 3 mobile extension is responsible for the good condition of the duplicator 3 market. Try to reinstall this utility and also check the page of the Toshiba driver for updates.
-
No message signal on an external TV via display port
* Original title: Display port
Hi, I bought this computer. Trodden to plug into my TV via the port display > HDMI but it says no signal.
I tried
-different cables
-different slot
-different Tv
-duplicate or projector only option with the help of another monitor via VGA
-changed screen resulation
nothing works
She just cannot recognize the TV via DP
It's just driving me crazy.
Ask yourself one can help
Thank you
Mac
-
------------------ System Information ------------------ Time of this report: 4/12/2016, 13:44:47 Machine name: HOME-PC Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.151019-1254) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: OptiPlex 980 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A05 Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz (8 CPUs), ~2.9GHz Memory: 8192MB RAM Available OS Memory: 8118MB RAM Page File: 1365MB used, 14870MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: 144 DPI (150 percent) System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Enabled DxDiag Version: 6.01.7601.17514 32bit Unicode ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: ATI Radeon HD 3400 Series Manufacturer: Advanced Micro Devices, Inc. Chip type: ATI display adapter (0x95C5) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_95C5&SUBSYS_03421028&REV_00 Display Memory: 3059 MB Dedicated Memory: 248 MB Shared Memory: 2811 MB Current Mode: 1920 x 1080 (32 bit) (60Hz) Monitor Name: Generic PnP Monitor Monitor Model: LCD MONITOR Monitor Id: MTC03D7 Native Mode: 1440 x 900(p) (59.887Hz) Output Type: HD15 Driver Name: aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll Driver File Version: 8.17.0010.1129 (English) Driver Version: 8.970.100.1100 DDI Version: 10.1 Driver Model: WDDM 1.1 Driver Attributes: Final Retail Driver Date/Size: 4/30/2013 14:19:54, 1094024 bytes WHQL Logo'd: Yes WHQL Date Stamp: Device Identifier: {D7B71EE2-D685-11CF-F177-4823BEC2C535} Vendor ID: 0x1002 Device ID: 0x95C5 SubSys ID: 0x03421028 Revision ID: 0x0000 Driver Strong Name: oem9.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_RV610:8.970.100.1100:pci\ven_1002&dev_95c5 Rank Of Driver: 00E62001 Video Accel: ModeMPEG2_A ModeMPEG2_C Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY D3D9 Overlay: Not Supported DXVA-HD: Not Supported DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled ------------- Sound Devices ------------- Description: Speakers / Headphones (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_102802DA&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.7724 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 1/22/2016 23:11:38, 4769536 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: 2.4G RX Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0E8F, 0x00A7 FF Driver: n/a Device Name: 2.4G RX Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0E8F, 0x00A7 FF Driver: n/a Device Name: 2.4G RX Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0E8F, 0x00A7 FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x8086, 0x3B3C | Matching Device ID: usb\root_hub20 | Service: usbhub | +-+ Generic USB Hub | | Vendor/Product ID: 0x8087, 0x0020 | | Location: Port_#0001.Hub_#0001 | | Matching Device ID: usb\class_09 | | Service: usbhub ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + HID Keyboard Device | Vendor/Product ID: 0x0E8F, 0x00A7 | Matching Device ID: hid_device_system_keyboard | Service: kbdhid | + HID Keyboard Device | Vendor/Product ID: 0x0E8F, 0x00A7 | Matching Device ID: hid_device_system_keyboard | Service: kbdhid | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + HID-compliant mouse | Vendor/Product ID: 0x0E8F, 0x00A7 | Matching Device ID: hid_device_system_mouse | Service: mouhid | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 432.5 GB Total Space: 476.6 GB File System: NTFS Model: WDC WD5000AAKX-75U6A SCSI Disk Device Drive: D: Model: TSSTcorp DVD+-RW TS-H653G SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes -------------- System Devices -------------- Name: Intel(R) processor System Control and Status Registers - D157 Device ID: PCI\VEN_8086&DEV_D157&SUBSYS_00DA0028&REV_11\3&172E68DD&0&42 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_8086&DEV_3B66&SUBSYS_02DA1028&REV_06\3&172E68DD&0&B2 Driver: n/a Name: Intel(R) 5 Series/3400 Series SATA AHCI Controller Device ID: PCI\VEN_8086&DEV_3B22&SUBSYS_02DA1028&REV_05\3&172E68DD&0&FA Driver: n/a Name: Intel(R) processor Semaphore and Scratchpad Registers - D156 Device ID: PCI\VEN_8086&DEV_D156&SUBSYS_00DA0028&REV_11\3&172E68DD&0&41 Driver: n/a Name: Intel(R) Management Engine Interface Device ID: PCI\VEN_8086&DEV_3B64&SUBSYS_02DA1028&REV_06\3&172E68DD&0&B0 Driver: n/a Name: Intel(R) Q57 Express Chipset LPC Interface Controller - 3B0A Device ID: PCI\VEN_8086&DEV_3B0A&SUBSYS_02DA1028&REV_05\3&172E68DD&0&F8 Driver: n/a Name: Intel(R) processor System Management Registers - D155 Device ID: PCI\VEN_8086&DEV_D155&SUBSYS_00DA0028&REV_11\3&172E68DD&0&40 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_8086&DEV_3B56&SUBSYS_02DA1028&REV_05\3&172E68DD&0&D8 Driver: n/a Name: Intel(R) 82801 PCI Bridge - 244E Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_02DA1028&REV_A5\3&172E68DD&0&F0 Driver: n/a Name: Intel(R) QuickPath Interconnect - D151 Device ID: PCI\VEN_8086&DEV_D151&SUBSYS_00DA0028&REV_11\3&172E68DD&0&81 Driver: n/a Name: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 5 - 3B4A Device ID: PCI\VEN_8086&DEV_3B4A&SUBSYS_02DA1028&REV_05\3&172E68DD&0&E4 Driver: n/a Name: Intel(R) 82578DM Gigabit Network Connection Device ID: PCI\VEN_8086&DEV_10EF&SUBSYS_02DA1028&REV_05\3&172E68DD&0&C8 Driver: n/a Name: Intel(R) QuickPath Interconnect - D150 Device ID: PCI\VEN_8086&DEV_D150&SUBSYS_00DA0028&REV_11\3&172E68DD&0&80 Driver: n/a Name: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root Port 1 - 3B42 Device ID: PCI\VEN_8086&DEV_3B42&SUBSYS_02DA1028&REV_05\3&172E68DD&0&E0 Driver: n/a Name: ATI Radeon HD 3400 Series Device ID: PCI\VEN_1002&DEV_95C5&SUBSYS_03421028&REV_00\4&376AF7CF&0&0018 Driver: n/a Name: Intel(R) processor PCI Express Root Port 1 - D138 Device ID: PCI\VEN_8086&DEV_D138&SUBSYS_02DA1028&REV_11\3&172E68DD&0&18 Driver: n/a Name: Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C Device ID: PCI\VEN_8086&DEV_3B3C&SUBSYS_02DA1028&REV_05\3&172E68DD&0&D0 Driver: n/a Name: Intel(R) processor DMI - D131 Device ID: PCI\VEN_8086&DEV_D131&SUBSYS_02DA1028&REV_11\3&172E68DD&0&00 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0
Hey there Mac5321,
You can connect any monitor to this port? The port on the GPU works at all? Have you tried another port VGA, HDMI or other available to connect to any monitor at all? The computer worked before?
I try to reset the BIOS to its default settings and retry the system if it will bring an image to any monitor. The fault may be in the GPU or motherboard not providing the connection appropriate for video output. Is the computer works properly, the fans spinning, initial POST beep, etc.?
Captain_WD.
-
Setting port channel between UCS - FI and MDS 9124 (Mode F)
Dear team,
We tried to create the channel of port between UCS FI and MDS 9124
But the port channel do not take action in mode F on MDS 9124
FI is in host FC end Mode
We have allowed FC uplink on FI trunking
We have activated NPIV on MDS
We have activated the MDS trunk
FI and MDS in default VSAN
To check that we have changed the way FI FC channels mode and switch port became active, but in E mode
When we enabled CF trunking of uplink on the port mode FI channels and FC Switching became active in mode TE
but in both cases above, showflogi database shows WWPN of SAN alone does not have the any fi.
How to achieve this?
Have read that no need to change the mode switching mode of CF swicthing and keep FC Endhost way
SO how to channel ports with mode F MDS and FI (Display Mode as NProxy)
What is it has nothing to do with the MDS NX - OS version? (https://supportforums.cisco.com/thread/2179129)
If yes how to put as license for ports came with the camera and we don't have any CAP/PAK or license file as she came
with license
Also, we saw 2 files available for download (m9100-s2ek9-kickstart - mz.5.2.8 .bin and m9100-s2ek9 - mz.5.2.8 .bin b b) to use
Thanks and greetings
Jose
Hi Jo Bo.
What version of the software if your MDS race?
On your UCS do connect nxos and show ficelleStringString ficelleT inteface and find the mac address.
It is possible that you could be hitting the bug below. If this is the case, you may need to update the firmware on your MDS.
Add MAC YES '002a6a', '8c604f', '00defb' for 5 k/UCS-FI
http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty04686
Symptom:
Link change cannot connect any other Nexus or other Cisco Switch in mode VAN with a port channel F. Question can be viewed in older versions of 5.1
5.1.3.N1.1a
but not later
5.1.3.N2.1c
Release. Question is also found in
5.2 (1) N1 (1)
and
6.0 (2) N1 (1)
and later versions.
Conditions:
Nexus configured for the link SAN PortChannels or NPIV Nexus mode connected to the UCS via regular F port channel where UCS VAN VAN edge mode switch: YES switch manufactured FI or another Cisco UCS Port WWN: xx:xx:00:2 has: 6a: xx:xx:xx or xx:xx:8 c: 60:4f:xx:xx:xx
Workaround solution:
Turn-off on Nexus 5 k TF-port question link mode does not happen with standard F-PORT SAN to remove Portchannel config
Other Description of the problem:
To check question collect please see the flogi-event history internal errors whenever the port is attempted OLS, AMENDMENTS, PBA counters will increment. This can be determined via the following output, view port internal info to see all the internal-historic port of error events
Maybe you are looking for
-
When I sync my ipod touch with itunes only the first song is downloaded and then he sits for hours
When I try to sync my ipod touch with iTunes, only the first song seems to be downloaded, then he just "hangs" for hours
-
Where are the UART pins on sbRIO-9627?
I'm new to the SingleBoard RIO and I need 5 UARTS, but I can't find RX TX PIN. Where the pins are located? Data sheet: http://www.ni.com/pdf/manuals/375466a.pdf Product page: http://www.ni.com/white-paper/52801/en/ RS232Edge (Total) = 2 (6)
-
Hello.I had a problem when im trying to start a game that show the statementGet D3DX Shader output semantics could not be located in the dynamic link library d3dx9_34.dlland I play in the system and the System 32 folders d3dx9_34.dll and I found it h
-
I can't CLOSE the EVENT VIEWER no matter WHAT MEASURES I TAKE IT CONTINUES by SAYING ME to CLOSE ALL DIALOG BOXES ALTHOUGH THERE ARE NO OPEN. I LOOK AT THE ANSWERS FOR THIS AND HE SAYS to UNINSTALL IE9 BETA I SAyY HEIN?
-
6224 to 5324 on Embarq 100 MB point needs help of Ethernet on MTU
We run on optical fiber with Embarq on their ethernet point to point service. On the 6224 I MTU normally the default value of 1518, Embarq sets the MTU in their Cisco 3400 to 1546. When they do, we have major problems with traffic, not to complete an