iOS 10 causing 'No. Service' and 'Search' 6 AT & T iPhone

Similar Questions

• How to enable web services and search for printer email address

  I am trying to sign up for the monthly INK from HP.  As part of the application, they ask me a CODE.  However, I can't CODE because I am advised that my Web services are not enabled.  How to enable Web services so that I can complete my application?  Thanks for any help you can offer me.

  Hello

  What model of printer you have?

  Assuming your eprint-enabled printer, please follow the steps below to connect to web services and get your email from the printer.

  To find printers e-mail you need to enable web services from the front panel of the printer. It is normally a button on the front panel or an option in a menu.

  The printer will be connected to your WiFI network, and once the device is activated, it should display a page with a code composed of letters and numbers. It is the e-mail address of printers (when you add a @hpeprint.com to it).

  Once you have this, go ahead and configure a connected HP account and register the printer to your account. This will allow you to manage settings of the ePrint printer but also to track the history of the work.

• My iPhone says 5 c searching for service and I know I service someone know what is the problem with my phone?

  I need help

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Restart your iPhone or iPad.
  2. Looking for a carrier settings update.
  3. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  4. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  5. If you have another device, see if you can connect your business with her network to this place.
  6. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.
  7. Update your iPhone or iPad to the latest version of iOS.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

• 9.2 iOS apps causing lag and crash

  Since I updated my iPad 2 for iOS 9.2 apps lag and was crushed, I noticed on my iPhone 6 more as well, but not as bad (probably because the phone is more powerful).  My iPad 2 now can handle running an app for about 5-10 minutes before the shift sets in and eventually blocks the application, this happens with any application, including parameters, etc..  It is a new installation of iOS 9.2.  I did not refresh app in the background running, I turn reduce movement and disable any spotlight search items and anything that can monopolize the active memory.  Unfortunately, it doesn't seem to matter and now my iPad 2 is practically useless to use.  I've never had this problem with previous versions of iOS so I can reload the iOS 8.4.

  I was wondering if anyone else knows the offset of the app and crashes in iOS 9?

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• Power of Microsoft service and MMCSS causing startup freeze

  I have Windows 7 set to automatically download updates from one day to the next.  He downloaded a few of the latest updates (lot of September), I installed them, and then the computer started to freeze during startup... it would lock up just before the login screen.

  I went into safe mode and has a restored system.  Which corrects the problem.

  Then again downloaded and installed updates.  I woke up in the morning to find my computer frozen during startup, just like before.  So I tried to do a restore of the system, just like before.

  This time, the system restore did not work.  And after that, I couldn't even in safe mode... the computer freezes even when in safe mode.

  Then I booted from the CD with Windows 7 and tried a restore of the system in August.  Who has not fixed the problem... the computer always locked up at startup.

  Then I was the restoration of the image around August 20.  Who not has not yet fixed the problem.  I was able to get into safe mode now, but the computer still froze when I would start normally.  This has never been a problem before the latest updates of September.

  I then reduced what services were originally the lock upward.  It turns out that if I turned off the power of Microsoft Service, my computer should start normally.  Alternatively, if I disabled the Multimedia Class Scheduler service, my computer should start normally.  But if I have these two services running at the same time, then my computer hangs at startup.

  Right now I have the MMCSS off, but I can not all the sounds from my computer because of that, and the Windows Audio Service does not work.

  Now I'm in a situation where I don't know how to solve this problem.

  Hello
   
  
  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
   
  Method 2.
  Try to update the audio drivers to verify.
  Update your sound driver in Device Manager:
  a. Click Start and then click Control Panel
  b. click on system and Maintenance
  c. under Device Manager, click on devices and equipment display
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  d. expand sound, video and game controllers
  e. right click on your Audio Controller, and then click Properties
  f. Select the driver tab
  g. click the Update Driver button.
  h. Select the option automatically search for an updated driver
   
  Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.
   
  For more information see the links below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Automatically get recommended drivers and updates for your hardware
  
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 9.3.1 IOS will cause questions to iPhones, because I have a lot of important things on my iPhone6 and iPod 5th generation I don't want to lose

  Update to 9.3.1 iOS will cause questions to my iPhome 6 and iPod 5th generation

  I have a lot of important things about them that I don't want to lose

  and I can't save them because my computer is broken

  I can't promise anything but through discussions on the forum questions to 9.3.1 vs threads have reported problems for 9.3, there are significantly fewer problems for 3.1 3.

  You can always save things until you do (honestly, it is advisable to always back up your device before installing new software)

  Even with a broken computer you can save things via iCloud, or simply important files to yourself by email or use something like dropbox, of them for download at.

• Close-up on iTunes Radio AND Search Suggestions MAY NOT BE RESTRICTED for CHILDREN on iOS 9.2.1 AND IS UNSAFE FOR CHILDREN

  Hello

  Even when I block everything under 'Settings' and 'Général' and 'Restrictions', my children can still access content inappropriate through "Spotlight Search Suggestions" on the search bar on my iPhone or see inappropriate suggestions illustrations Album and research through "iTunes Radio.  These two parts of UNLOCKED iPhone need to be blocked.  Please Apple, help my children and I have a secure environment on my iPhone without interference from portions of UNLOCKED the iPhone iOS.  Please do not many of us have to go to a national broadcasting network to announce that the iPhone IS NOT safe for CHILDREN and cannot NOT BE SMALL.

  I guess you have to monitor the activities of your children yourself.

• I click on the botton of start and type msconfig and the area off I click Service and discovered that 80 Microsoft has been stop mark what's causing this and how can I solve the problem

  I click on start and type in msconfig research and a box has opened and then I click on the Service and 80 this was mark stop. They all register of microsoft corporation. I believe this, why I had some problem with my computer.

  Hello

  There may be no problem that many Services start and stop on request so everything can be normal.

  Start - type in the search box-> control of the superior and right click on - RUN AS ADMIN.

  Or Control Panel - Administrative Tools - Control Services.

  To check the default settings for Windows Services:

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why the right mouse clicking on the icons and thumbnails cause error message and the screen resets?

  When I returned from vacation, my PC worked as usual, but later in the day that it would be not laod, it gets to a certain point and then a blue screen and try a reboot. Managed to use the 'safe mode' and finally 'System restore', but it kept crashing until I went back as it would go, i.e. end of /April. Been authorized since except this error right click of the mouse.

  Looks like you may have a bad Windows Explorer (not Internet Explorer) add on.

  What is your version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Here are a few thoughts:

  When the Windows Explorer (not Internet Explorer) is wrong to behave on a right click, begins to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added sometimes without your knowledge or consent when you install some software.

  Have you installed new software because the system finally worked correctly and if so, what?

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).  When you right click on something, the Explorer wants to display a menu of choices.  If there is a bad or outdated extension, Explorer may crash.

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment, then there is no message the next time you do whatever it is you're doing, you've found and fixed (or perhaps you can fix).

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft not to sort the display (by clicking on the column of Microsoft) if all the "" s are on top and easy to see.

  The s in 'No' would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there are visits, on Explorer crashing and what other people have done about it.

  You can Google something like:

  Explorer XP crashing

  (you must fill in the name of adds your suspect on).

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  Last extension you have turned off the
  a suspect.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but when you turn off/turn on extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you find the problem, I reboot and retest anyway to really be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  If you get a blue screen of death (BSOD), you must do this:

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Finally, I'd be curious to know why you say you get an error message and tell us what the error message said.

• Windows 7 Security Center service is missing from the (local) services and cannot be started

  Hi Experts,

  I use the version of windows 7 Home premium. My computer suddenly got hit by the virus and I found the message in the center of action as "Activate windows Security Center service", but when I do, the message I m getting "failed to start the windows Security Center service"

  Options, I tried to replace as follows.

  one) went to the services (local) and checked the Security Center to check the startup mode but the Security Center is missing here
  (b) tried to run the malwarebytes software, he finds some virus and I deleted

  Yet, I could not able to get rid. Help, please

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

  Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
  Chech also the serices dependent as below.

  References to Vista also apply to Windows 7.
  
  Check the default services and dependencies to ensure that they are running.
  http://wiki.blackviper.com/wiki/Security_Center

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  ====================================

  To look for the Windows 7 KB and responses for Solutions (most are above).

  Searck of Ko &-> 1058 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  I hope this helps.

• Jump in the middle of an audio track streaming on various sites causes the stuttering and audio glitch

  Hello

  Please refer to this thread for support on the technical support of SoundCloud forums. The thread contains all relevant information, including videos of the screenshots problem and console, made by myself and others. https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox

  In short, when you try to move forward for streaming audio, there is a memory buffer/stuttering problem that prevents a correct reading of the track. This problem is confirmed on SoundCloud and Traxsource and other people in the support thread mentioned Mixcloud and other streaming sites. In other words, it is not the special streaming service fault or another.

  The problem does not occur in Microsoft Edge, Internet Explorer or Chrome. Well, to clarify, when the issue was published on SoundCloud support forums, Chrome was having the same problem. However, they made a version a few days ago thrust, that fixed it.

  Here's my original on the SoundCloud support post (less), which has the relevant details. Note that we have updated both Flash and Firefox recently, so although I have mentioned earlier in my original post, everyone involved has since updated their browsers and Flash.

  From now on, the only solution for the problem is to go back to Firefox 40.0.2. Thanks for any help =)

  Matt

  Original message =.

  Jump in the middle of a track causes the stuttering and audio glitch (Firefox).

  I am running Windows 10 Pro.

  There seems to be a problem of caching that affect reading - I started noticing this problem three or four days ago. Previously, I could jump through my feeds at will, go straight until the middle of the tracks or mixes of listen seconds and determine if I liked the track. Now, I can't do it on Firefox 41.0.1. The problem is simply annoying on songs that are 3 or 4 minutes in length, as I must leave "cache" maybe ten seconds before jumping. Unfortunately, the problem is a game-breaker on mixtures which, for example, are 90 minutes long. If I jump to a point directly in the middle of the combination, nothing happens. The play button alternates between the 'Play' symbol and the symbol of 'Caching' ('... "), and so audio resumes, it is glitchy and consists of different parts of the track being played at the same time.

  I've eliminated my internet connection as the source of the problem by loading on board. On the edge of 20.10240.16384, the problem does not exist. I can scroll down to any mix of 2 hours in my stream, click on the middle of it, and the audio starts right up. No caching, without stuttering or glitching.

  I drove back Flash version 18 to see if it solved the problem in Firefox, but it did not. The problem persisted, so I re-updated to Flash 19.

  Yes, I understand how all versions and updates to work. I meant it as a generation of powder magazine. My bad.

  I consider this problem to be solved. Several different pre-release versions of Firefox have solved the problem; I have personally used both of them that work perfectly. A representative of Bugzilla stated that the patch will be integrated into Firefox 42, which will be released on 3 November.

  https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox?topic-reply-list [Settings] [filter_by] = all & question-answer-list [parameters] [reply_id] = 16269116 #reply_16269116

  I now consider this private matter. Thanks to all of you who have been here =)

• Icons to fill my address and search bars

  I'm using Firefox 29.0.1, and when I open a tab at a website, my address bar and search bar are suddenly filled with icons such as cut, paste, print, etc.. The URL disappears or is blocked by the icons and unreadable. In addition, icons do function - by clicking on the print icon, for example, has no effect. Does anyone else have this problem? Any ideas how to fix?

  Probably caused by an incompatible add-on.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• After iOS updated 9.3.2,and I can't transfer pictures to my PC

  I installed the iOS 9.3.2 update on my iPhone 4S. A few days ago I realized that I was low on storage space. I have collected many photos of my grandchildren and other less important things. 1249 pictures to be exact. I started the process I use to transfer pictures to my Windows PC Pro 10. After connecting the iPhone to the PC, a few times, the PC he recognized in the file Explorer. I find the iPhone in the list. I opened it. I clicked on "internal storage". It was empty. There is no "DCIM" folder or any file, as there has always been before. Y at - it something I'm doing wrong or not Apple introduced a new method to transfer photos in the iOS 9.3.2 update?

  Additional information:

  iPhone: model 4S

  Memory:

  Capacity: 12,5 GB

  Free: 459 MB

  Applications: 212

  Security: Own CM master

  Howdy, PINETREE01!

  In my view, that he is your first message to Apple Support communities. Welcome! You are in the right place for help. It is important to be able to import your photos.

  The method that you use to import the photos should still work. Since you saw misbehave, it of a good idea to restart the computer and the iPhone, and then try again. If this does not help, we have a guide for the next steps: If you can not import pictures from your iPhone, iPad, or iPod touch to your computer

  In particular, try the following steps:

  Updates

  1. Automatically search for updates of your photo management software and iTunes.
  2. Update your iPad, iPhone or iPod touch.
  3. Update your Mac or PC. In Windows, use the Windows Update application.

  Try to import photos once again

  First of all, repeat the steps to import photos to your computer . Try the following steps:

  1. Create a new photo to import. You can Save a screenshot on your iOS device by pressing the Home button and the sleep/wake button at the same time.
  2. Connect your iOS device to your computer.
  3. Try to import your photos using your photo management software. You can also try the following steps on your PC:
     • Mac: Open Capture of Image in the Applications folder.
     • Windows 8: Move the cursor to the top right, click the magnifying glass, enter the computer and press return. Right click on your device under portable devices (if present) and choose import photos.
     • Windows 7: Click Start > computer. Under devices laptops, right click on the device and then choose import photos.
  4. If your computer does not see your device, make sure that your device trusts the computer.

  Enjoy your week!

• Carplay works is not on my ios iPhone6 9.2.1 and VW Passat discover Pro 2016 GTE

  I tried to do everything to get my iPhone6 work with Carplay on the Discover Pro.

  Change of SIM card

  Bluetooth on and outside, unpaired etc.

  Reset iphone6 via iTunes and configured as a new iPhone

  Tried different lightning original apple cables, one provided by Apple support Netherlands

  Tried to reset the default settings of appconnect on the Discover Pro

  When I connect to an another iPhone6s it works immediately.

  tried the same settings of the 6s that does the work, although the iPhone6 does not work with Carplay.

  Here is a video of the process demonstrated that it does not work. After all of these options, I tried

  http://youtu.be/3ARj7osDfM8

  Apple support escalated the issue to support from apple engineers, a week ago, I called 2 times to get an answer, but they are always looking in what they say.

  I tried each much option of Carplay fans told me to try, but my ios 9.2.1 iPhone6 does not work with Carplay on the Discover Pro.

  and yes the discover pro is the latest firmware running and works like a charm with a 6s by using the original apple cable. But my 6 is not...

  waiting on the Apple support...

  I had this exact problem with my Passat from 2016. Searched the interwebs and finally found an easy solution. Hold the power button on your radio in the car down for 15 seconds until you see that he has adjusted.  Connect the cables and that is.

• Cable HDMI between HP g6 and HDTV cause an overheating and stop?

  I tried two HDMI cables for 3 years, HP Pavilion g6 connect with HDTV. Both are HP overheating and stopping. He worked a year ago but old broken cable. I dusted off by fan below.  I tried to watch a free movie on HULU.  Not overheat when using the case.

  Hi there @kathcat,

  Welcome to the Forums of HP Support!

  The quick answer to your question is clearly yes, because you are experiencing it. However, it should not cause this problem, and it is a symptom of a different problem. So the real question is why it arouses your laptop overheating?

  As any type of electrical connection, it will draw current through your computer, and if your energy consumption is already high for other reasons, this will increase your level of heat.

  I understand this as an info.

  Why computers generate heat

  And this will help to show the things that you can try, to help reduce heat, including cleaning.

  Reduce the heat inside the PC to avoid overheating

  Also, if you post the complete product number, I can look for the correct service guide which should include disassembly instructions, that will certainly help with cleaning as long as you're careful and follow all instructions to avoid accidental damage.  How can I find my model number or product number?

  Let me know if this helped.