IOS corrupted and lost
Well, here is my problem on Friday... I tried to update the IOS on Ap1231 and 2 of them gave me bad results. The first, running the IOS in memory but don't copy the config for the flash. So the http, https does not work and I don't know how to get the bin on the access file.
The 2nd AP is corrupted and is now about to quick access. I'm figuring there is a path through the serial port, but I can't find any info on the site.
Can someone help, it's a mystery to me, for which upgrades are always a cross your thing a little fingers with these series 1200 AP
Thank you
The f
Hi Jeff,
Good fun for a Friday :)
You can try this method?
Reload the Image of Point of access/Bridge (adapted Edited)
Using the CLI
Step 1 open the CLI using a connection or a Telnet session to port console access point.
Step 2 Reboot the access point by removing power and reapplying power.
Step 3 let the boot of access point until it begins to swell the image. When you see these lines on the CLI, press Esc:
Loading "flash:/c1310-k9w7-mx.v122_13_ja.20031010/c1310-k9w7-mx.v122_13_ja.20031010".
...###########################################
Note according to the software emulation of terminal you are using, you may need to press ESC twice to access the boot loader.
Step 4 when the bridge: command prompt appears, enter the set command to assign an IP address, subnet mask and Gateway default to the access point.
Note You must use uppercase characters when you enter options IP-ADDR, NETWORK and DEFAULT_ROUTER mask with the set command.
Your entries might look like this example:
AP: value 192.168.133.160 IP_ADDR
AP: the value of 255.255.255.0 subnet mask
AP: set DEFAULT_ROUTER 192.168.133.1
Step 5 enter the command tftp_init to prepare the access point for TFTP.
AP: tftp_init
Step 6, enter the "tar" command to load and inflate the new image to your TFTP server. The order must include this information:
the option - such, which inflates the image when it is charged
the IP address of your TFTP server
the directory on the TFTP server containing the image
the name of the image
the destination of the image (the access point Flash)
Your entry might look like this example:
AP: tar - suchftp://192.168.130.222/images/c1310-k9w7-tar.122_15.JA1 flash t:
Step 7 when the display becomes full breaks in the CLI and displays - MORE-. Press SPACEBAR to continue.
extracting information (229 bytes)
C1310-k9w7-MX.122-15.JA1/ (directory) 0 (bytes)
C1310-k9w7-MX.122-15.JA1/HTML/ (directory) 0 (bytes)
C1310-k9w7-MX.122-15.JA1/HTML/Level1/ (directory) 0 (bytes)
extraction c1310-k9w7-mx.122-15.JA1/html/level1/appsui.js (558 bytes)
-MORE-
If you do not press the SPACEBAR to continue, the process eventually times out and the access point continues to inflate the image.
Step 8, type the command STARTER set to designate the new image that image that the access point uses when it restarts. The access point creates a directory for the image that has the same name as the image, and you must include the directory in the command. Your entry might look like this example:
AP: set initialization flash:/c1310-k9w7-mx.122-15.JA1/c1310-k9w7-mx.122-15.JA1
Step 9, enter the set command to check your boot loader entries.
AP: the value
Boot=Flash:/C1310-k9w7-MX.122-15.JA1/C1310-k9w7-MX.122-15.JA1
DEFAULT_ROUTER = 192.168.133.1
IP_ADDR = 192.168.133.160
SUBNET MASK = 255.255.255.0
Step 10 enter the command start to reset the access point. When the access point reboots, it will load the new image.
AP: start
I hope this helps!
Rob
Tags: Cisco Wireless
Similar Questions
-
Upgrades to IOS 10 and lost the screen capture feature
Previous IOS versions allowed me to do a screen capture using the home and power buttons, but in 10 IOS it no longer works. Why?
It still needs work. It does for me. However, the change in the way that the button Home construction seems to have caused the calendar problems for some people. Try pressing the power first and now button, and then press the home button.
-
Just updated to IOS 10 and replace text does not work
Just updated to IOS 10 and replace text does not work. For example typing in omg should show oh my God. Has anyone else got this?
I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?
-
I upgraded to El captain and lost all my address book. How can I get it back?
I upgraded to IOS 10.11.3 and lost my entire contact list. How can I get that back?
If you use iCloud, you should be able to sign in iCloud and your Contacts should appear.
If you don't use icloud, you can restore them from your Time Machine backup.
Good luck
GB
-
I put my cRIO 'DHCP' to 'local connection' and lost contact with her.
I put my cRIO 'DHCP' to 'local connection' and lost contact with her.
I changed the location setting labelled '2' to post a link-local only, so I think I hit save to '3 '. So, I have had no contact with my cRIO network.
I tried;
Hit the reset button
A MAX of opening closure
Go to safe mode
Lift the switch to reset IP
Power cycling the cRIO
Directly from the host to my target of cat 5 cable running
None of it worked, and I have no contact with my cRIO.
This is what MAX looks like now. How can I fix?
It turns out that I had more of a problem. Corrupt drivers, 255 in many in my subnet mask, overly complex LAN, use server control... you get the idea. So I just deleted all software, disassembled everything and more from scratch. Now back to the top and work.
Thanks for the tips everyone, all the pieces and peace where it is useful to help me see the bigger picture.
-
I ran a restore and lost all my files. I can get back them some how
Original title: files lostI ran a restore and lost all my files (more importantly photos). I can get back them some how
Hello
Log in as ADMIN
Your photos and other files should still be there under C:\Users\Your user Name\
Sounds like your account became corrupted or affected by malware?
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original Title:msdt.exe corrupted file
I can't find any solution to repair is Msdt.exe corrupt file.
This is the error I get C:\Windows\diagnostics\system\Networking is corrupted and unreadable
Windows Update is not automatically searching for updates and I can't update adobe
These are the things that I tried 1. Restore to an earlier date. (does not work because of the corrupted file)
2 Ckdsk (does not work or does not work in safe mode)
3 Sfc/scannow (does not work or does not work in safe mode)
4 Microsoft Fix (cannot open the troubleshooting of windows) does not work.
This is the error that I get Code80072efd
Hello
I'm afraid that, as most of the troubleshooting steps have been tried before without much success, only two options remaining to recover operating systems are:
(a) the system restore:
System Restore helps you restore system files from your computer to an earlier point in time. As a general rule, you want to restore your computer to a restore point created before the date and time when you started noticing problems. The descriptions of the restore points are created automatically with the name of an event, such as Windows Update to install an update. System Restore returns your computer to the State it was in before the restore point that you choose.
To learn more about how to run system restore you can follow this link given below:
http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings
NOTE: However, it is said that the system restore does not affect your personal information such as e-mail, documents, photos, videos, etc., but it is quite possible that some of your personal files are removed during the restoration of the system.
During the restoration of the system, there may be errors and those errors can damage the files that are present in the system. And turn off your computer during the restore process may also lead to the loss of files. Sometimes, when the restoration of the system is down, it can lead to the loss of important files as well.
(b) in the upgrade of the Place:
An upgrade on the spot is the final solution before you have to reinstall the operating system.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.Note: Applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
Hope this helps, if you need help with windows, please let us know we will be happy to help you.
-
Original title: recovery of original windows 8
When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.
Please help me to get my windows genuine 8 back so I could get additional updates downloaded.
Hello Vishal,
Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.
If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.
See the suggestions posted by Andre Da Costa replied on March 7, 2013.
In addition to this, see:
Product key lost or misplaced (certificate of authenticity) for Windows
If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.
Hope this information was useful.
-
My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows. The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable. The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop. Can you tell me the best way to do it? -Thank you
If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC ) -
When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please
Hello
If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):
-
I have iOS 10 and I am still unable to make messages with animation effects. How can I solve this problem?
Without knowing what is happening when you try, it is difficult to recommend troubleshooting. However, one of the first steps is to ensure that you don't have to reduce the Motion activated in accessibility.
-
iMessage with iOS 10 and MacOS Sierra
Before upgrading to iOS 10 and macOS Sierra, iMessages sent from my iPhone seems also in the application iMessages on my MacBook Pro and my iPad 2 Air - and the same for all three devices.
It worked very well in my opinion. When I'm at my laptop, it is very convenient type of responses on the keyboard.
However, after the upgrades, this connection has stopped. Each unit is not to see the iMessages of others, although all three devices are signed on the same iCloud account.
What is a reduction in function? Or am I missing something? I tried settings and preferences.
macOS 10.12 (mid-2014 rMBP)
10.0.2 iOS (iPhone 6s, iPad Air2)
Thank you
-bruce
Hello
Sign of iMessages (the Apple ID used) on all devices
Drag the item in Messages app from green to white (close the application) on the iPhone.
Quit the application on other devices.
On the iPhone, open the application again.
Wait for the number to check.
While what happens opened the app on the Mac and the sign of return on account of iMessage.
Once the iPhone number checked send an iMessages specifically to your Apple ID (enter it manually).
If it works, add the Apple ID in Send and Receive on the iPhone version.
Accept the UPS op on the Mac.
(repeat for other signature devices in)
Set the item "send as SMS.
Check the iPhone joins the same LAN in the Mac WiFi settings is on
Reset the transmission of text on the iPhone which will cause the Code number must appear on the Mac to put on the iPhone.
Repeat for other devices.
Basically, try a reset.
21:28 Sunday. September 25, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
Apple Watch don't stay tuned since iOS 10 and watch the OS3 to update!
Upgrade to iOS 10 and OS3 shows my Apple Watch frequently disconnects throughout the day on my phone and the only way to solve this given to deactivate Bluetooth and turn it back on. Y at - it a bug and if yes, what is the difficulty?
Hello
It can help to disable the twinning and re - pair your watch.
The app shows on your iPhone takes a backup of your watch when unpairing via the app choose to backup restore when the possibility to put courses in place. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
Cancel the twinning of your iPhone - Apple and Apple Watch Support
-
I've just updated to ios 10. Now when I plug my phone into the usb port on my car, he always connect the phone to the car and can be controlled by the car, but it only plays music through the speaker on the phone instead of the car speakers. Is there any solution for this?
Hey lairddan,
If I understand correctly, you updated to iOS 10 and you are not able to play music on your car speakers using reading USB.
I recommend you to read this article, it may be able to help solve the problem.
If you are using USB playback
- Restart your iOS device and your car.
- Connect your iOS device to another stereo USB port (if you have one).
- Try another USB cable.
- Update your iOS device.
- Install the updates to the firmware of your car radio.
- Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help. If you can not play audio from an app Apple, contact Apple technical support.
Get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support
Thank you for using communities of Apple Support. Have a good.
-
My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.
Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.
I hope this can help.
Maybe you are looking for
-
After that I upgraded to itunes 12.5.2.1 and IOS 10 September 14 my 6s iphone is not recognized as a device if I sync my PC with Windows 10 on it. Help, please.
-
Migrate ReadyNAS to ReadyNAS 516 314
Hello I'm looking to migrate my 4 discs of my ReadyNAS 314 with the purchase of a new 516 ReadyNAS. Can someone give me instructions step by step on what I have to do to pass? Will my app structure remain intact, Plex Media Server, SickRage etc., or
-
Inputs voltage DAQ affecting each other and the camera, they save you of
Hello world! I use ELVIS II + and LabVIEW 2012 to register a device with a resistive sensor voltage (voltage see with ELVIS II.jpg for VI). The device (device + ELVIS II Schematic.jpg) measure the voltage across the resistive sensor and is controlled
-
I use outlook express with XP pro & I was able to remove all my items with the exception of two messages. We have a file size of 1283KB & other 8 KB. What can I do? Best regards, Mick.
-
Outlook Express 6, check spelling
French is the only language in my spell checker. How can I get English USA inside.