iOS image support ssh
Hello dear
Please can you tell me the image ((c2960-lanbase - mz.122 - 53.SE1.bin)) support the ssh or not?
If not what ios image can I charge for the 2960 G switch to support ssh.
Thank you
Hello sajjad_m1987,
C2960-lanbase - mz.122 - 53.SE1.bin does not support ssh.
You will need the crypto image that has the k9 in the name.
C2960-lanbasek9 - mz.122 - 52.SE.bin
You can go to the following link to search the ios which supports the functionality that is necessary.
http://Tools.Cisco.com/ITDIT/CFN/JSP/by-feature-technology.jsp
Hope this helps,
If Yes, please rate.
Tags: Cisco Network
Similar Questions
-
Module SSL are supported SSH version 1?
Hi all
I am pleased that we have this great to discuss Cisco product forum.
We have a SSL Module installed in our Catalyst 6509. The problem is what SMLS can only support SSH version 1, I could not find how to activate SSH version 2. Is it possible to use SSh version 2 for this device, only that I have to update the IOS?
Thank you very much for the help!
Details in the following way:
SSLM_SLOT9 (config) #ip ssh?
new authentication attempts to specify number of authentication retries
Departure (or only) Port number to listen on the port
RSA RSA key pair name configure ssh
source-interface interface to specify to address SSH source
connections
timeout specify SSH timeout
SSLM_SLOT9 (config) #ip ssh version 2
^
Invalid entry % detected at ' ^' marker.
Here is the information for the device:
Cisco Internetwork Operating System software
IOS (TM) SVCSSL (SVCSSL-K9Y9-M), Version 12.2 YS VERSION SOFTWARE (15)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Last updated on Saturday, 28 May 04 17:29 by integ
Image text-base: 0 x 00400078, database: 0x00AFE000
ROM: System Bootstrap, Version 12.2 YS1 SOFTWARE (11)
SSL Module WS-SVC-SSL-1HW Fw (1) Sw 2.1 7.2 3.2 (2).
Hello
support for SSHv2 has been added in version 3.1 software SMLS:
HTH
Herbert
-
Hi all
I have several 2950,2960,3550,3750 Switch
they performed old IOS (I don't know the exact version, but I'm sure they don't support all the features and upgrade to the image of EI and newer)
so I saw two articles
http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-...
and
http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst2960x/software...
-----------------------
so my question is to upgrade my ios to new version can I use two commands? and what is different between each CLI?
Command1:
first---> delete flash:
then:
Copy tftp flash:
IP:
name:
.....
order 2:
Archive Download-sw [directory] / crush/recharging tftp:[[//location]/directory]/image-name1.tar [image-name2.tar image image name3.tar - name4.tar]
So what is or what are the different between 2 commands above?
can I use two of them or not?
--------------------------------------------------
question 2:
How can I download the latest version of cisco layer 2 switch (2950, 2960) and layer 3 (3550,3750)?
How can I find out what are the different differ between the two IOS image? only I need (* .bin) no CMS (* .tar)
Best wishes
Thank you very much
Hello
I'll give you the method that I use to upgrade the L2 or L3 switches:
1 install the new image of page Web of Cisco (cisco.com--> support--> DOWNLOAD), I advise you do not install the last being rather install the recommended. (It will have a star next to it)
2. check if the version that you have installed if it has bugs.
3. install a TFTP server on a computer that has access to an IP address on the switch (example: you can configure an IP address for management by using the command "Int Vlan")
4 - Check the Flash on the switch by using the command "show Flash" to make sure that you have enough space.
5 put the image in the folder root of the TFTP server on your computer.
6. question a copy SERVICE TFTP to make a backup of your configuration. (it is always good to do a backup)
7. issue a copy TFTP Flash to make the image to be copied on the FLASH of the switch.
8-do a "show run | "I boot" to see images of starting on the switch.
9. do 'no boot system XXXXX"to the old images essentially copy the output of the command in step 8 and just put none initially.
10. do 'boot system THENEWIMAGE.
11 - this step is not required but I highly recommend it, you can add the old image using 'boot system OLDIMAGE' he will place the old image as a secondary image just in case where for some reason any main image does not start.
12 save changes using "copy run start".
13 - reload
14. use the 'view version' to ensure that the new version is in place.
It is the process of upgrading the software on the switch. It will be useful.
Note: Make sure that you have console access to the switch before performing the upgrade, just in case something goes wrong.
Best regards
-
Cisco NetFlow and required IOS image
Hello team Netpro-
I am preparing the documents concerning the deployment of Netflow version 5 for about 20 sites around the world. I would like to know what IOS images can support this technology. Currently, some of our routers run the following IOS Images:
(C7200-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)
(C2800NM-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)
(C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)
(C3825-SPSERVICESK9-M), Version 12.4 (6) T2, RELEASE SOFTWARE (fc1)
(C7200-IS-M), Version 12.4 (7), VERSION of the SOFTWARE (fc6)
Don't you think that we still need an IOS update or not?
Thank you in advance.
Jay
Also the information provided by the previous poster, I don't think you need to upgrade with the current images, that you have running, most SPSERVICES k9 images 12.4 versions take support netflow.
I also suggest go on this link, and the link provided in front of me.
http://www.Cisco.com/en/us/docs/iOS/12_4/NetFlow/configuration/guide/onf_gsg.html#wp1043332
You can check in the search of features here in feature navigator http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Another simple way to check is by typing a question mark to the cli without entering the command on routers.
example for this script very basic bellows on a router netflow put an exclamation mark without actual setting command
interface
IP route-cache?
route IP cache flow
Router (config) #ip import-export flows?
Router (config) #ip flow-export versions?<-- should="" show="" all="" the="" versions="" supported="" 1,5,9,="">-->
Router (config) #ip flow-cache timeout?
stream of Router (config) #ip - high -?<--- for="" top="" talkers="">--->
IP flow-export destination
IP flow-export version 5
IP flow-cache timeout active 1
flow-cache IP 15 idle timeout
IP high speed-flyers
Top 10
Sorting bytes
(C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)< ---="" this="" one="" should="" also="" be="" able="" to="" support="">
PLS note any useful message if it helps
Rgds
Jorge
-
cRIO-9024 - supports SSH (Secure Shell) network?
The Shell Server enable secure (sshd) in the measurement software & automation for the cRIO-9024 OR is not available. Usually, this would be an option as shown here:
http://www.NI.com/white-paper/14626/en/
The cRIO-9024 OR does support SSH? Do I need to install anything extra on the target? I installed most of the software on the web on the cRIO.
Thank you
Mitch
N ° only targets Linux (in the current line cRIO, i.e. the x 906 and 903 x) support ssh.
-
Hello
I have a cisco aironet 1100 Series wireless access point.
by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.
I need your help please.
For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).
I downloaded the file c100-k9w7 - mx.123 - 8.jed
and I download the tftp (tftpd32) servers
I have the router connected directly to a pc with the static ip address of 10.0.0.2
but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.
and by a tftpd32 I try but no function.
I don't know what I'm doing wrong.
other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.
Thank you.
I'll wait your hepls.
Convert a standalone Lightweight Access Point
http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272 -
ASA - SSM support SSH V2?
I'm starting to implement the CRA and tried to get the key of the host of the ASA - 5520 it got an error without papers:
IPS (config) # ssh - host key 10.0.0.50
Error: getHostSshKey: no supported version of remote Protocol (2.0)
Can it be true that the IPS does not support SSH V2?
Unfortunately, despite the underlying Linux system support SSH versions 1 and 2, the part IDS/IPS is not at the moment. There is a request for existing value/functionality (CSCse05771) for the addition of this type of support
HTH
-
Can someone point me to a link where it clearly shows the differences between images of IOS? For example how IP Base differs from Advanced IP Services for example but not limited to just this comparison? The Cisco site, where you can click on this button to show the differences don't seem to work. Thank you.
Wrong forum really but here is a good description:
http://nettipps.de/2010/06/09/ciscos-iOS-image/
What about Simon
http://www.linksysinfo.org -
Cryptographic IOS image loading
I received the following error message when you try to load an IOS image k9 on one of 2960 switches. Can someone tell me how to solve this problem?
Error: The image must be installed on the system 1 ('c2960-lanbasek9 - mz.122 - 52.SE')
Error: is equivalent to an existing image and the option "/ overwrite.
Error: was unsuccessful. Try again, or by deleting the old image
Error: first of all, or by selecting the option ' / overwrite.Almost forgot the command I used was: arc download-sw/Safe tftp://10.xx.xx.xx/c2960-lanbasek9-tar.122-52.SE.tar
Thank you
GLH
You try to switch with the exact same IOS.
-
Cannot find device write VMware esx server 3i image support to.
Hello
I'm fairly new Virtualization.
I downloaded: VMware ESX Server 3i Installable U4, Refresh Version 3.5 Update 4 | 153875-30-03-09 on the site and it burned on a disc. at the start of the disk and following the instructions in the installation guide, I get the following error:
The installation operation failed!
The installation operation has encountered a fatal error!
Cannot find device write VMware esx server 3i image support to.
The following system information will help the forum of VMWare support with your problem. Please note the information before proceeding.
Information System
Manufacturing: abandoned
Model: abandoned
Service etiquette: abandoned
BIOS Rev: SGP4510H.06A.0083.2008.0819.1026
OK, I can tell that you are new to this sort of thing, using windows XP, it is the best guide I have found for you should you walk through all the way.
http://www.Symantec.com/connect/articles/how-create-your-own-bootable-ESX-3i-USB-stick
-
Where can I find the list of iOS image Default.png file name?
I have a really hard time finding where the details are scattered on Adobe. Does anyone know the final list of the supported image filename for the publication of iOS default?
Here is what I used before to take charge until iPhone5 in portrait orientation:
Default.PNG
Default - Portrait.png
I would like to add iPhone 6 and 6 +.
Thank you
Hi René,.
To address all the concerns and difficulties encountered due to launch newly added images on iOS, we wrote an official blog. Please find here > Launch Images on iOS with Adobe AIR
I hope this helps!
Thank you
Jitender
-
Notegorical app? IOS 10 support?
Hello - I was using Notegorical app to track very important info. However, as I downloaded iOS 10, I can only see the notes I made, I can not add or copy/paste into another application. Can someone tell me how to solve this problem or move my info to another application? It's really terrible and I need help! Help, please! Thank you!!
Thia
You must contact the developer application or its support page to see if the app is supported in iOS 10.x. It is possible that the application must be updated for iOS 10.x, and they have not yet done.
-
How to remove search 10 iMessage iOS image history
How does one remove the iOS 10 iMessage image search history?
SEMs like nobody has an answer to this.
-
the new operation system ios 10 supports iphone 5
I downloaded ios 10 on iphone 5, but he said that I should connect to itunes
Yes, it works on the iPhone 5. Your iPhone needs to be restored. It entered into recovery mode if you do not see the connect to iTunes screen.
If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports
iPhone
- iPhone 7
- iPhone 7 more
- iPhone 6 s
- iPhone 6 sec more
- iPhone 6
- iPhone 6 Plus
- iPhone SE
- iPhone 5 s
- iPhone 5 c
- iPhone 5
-
IDSM2 on the inline 6500 IOS mode support?
Hello
I have a JOINT-2 running IPS5.1 (1 d) (recently updated to 4.x) software that sits on a 6500 IOS.
The IPS Device Manager shows gi0/7 and gi0/8 as well in Promiscuous mode. There is no option to change the inline mode and pair them up.
Is it so that JOINT-2 currently supports only Promiscuous mode?
If so, this module is always as IDS despite the execution of IPS5.1. Is it not? What is the advantage that I get after upgrade from 4.x to 5.1?
-Vasanth
There are 2 pieces of the puzzle.
There is the JOINT-2 version and it takes in charge, but also the native IOS of Cat 6 K version and that it supports.
Supports the v5.1 (1 d) JOINT-2
(a) promiscuous mode.
(b) mode InLine Interface pair (2 interfaces are matched to online tracking) and also
(c) pair online mode of Vlan (2 VLANS on a single interface is matched for online tracking, you will also see it called inline-on-a-stick)
But for these features to be used, the code switch must also support the configuration on the side of the switch of the JOINT-2 for each of these 3 features.
Native versions of IOS prior to 12.2 (18) SXE will only support the Promiscuous on JOINT-2 mode.
12.2 (18) SXE and later versions support Interface InLine mode on JOINT-2 pair.
No native IOS version does currently support InLine Vlan pair on JOINT-2 mode (a new versions native IOS with this support is currently in development).
For inlining (IPS), you need to run a Native IOS version 12.2 (18) SXE and later and on the JOINT-2 run IPS versions 5.1 (or even older 5.0).
(NOTE: Cat OS 8.5 (1) takes in charge the 3 modes of JOINT-2.) Therefore, if you use cat instead of the native IOS OS, then run version 8.5 (1) to have access to all the features of IPS 5.1 (1) on the JOINT-2)
If you run a Native IOS version prior to 12.2 (18) SXE and the JOINT-2 then it can run in "Promiscuous" mode even if 5.1 (1) is responsible for the JOINT-2.
However, even in "Promiscuous" mode the IPS 5.1 (1) software has a few advantages.
There are several engines and engine parameters are only supported in version 5.1 and not the version 4.0. (So there are several signatures that are either one) not yet created for sensors 4.x, or b) signature 4.x is not as precise as the signature of 5.x in new engines.
(These new engines are proved invaluable in writing signatures to detect some of the new attacks that came out last year).
There are of course other benefits:
For example:
(1) risk of note to best aid priority to alerts.
(2) fitlering more flexible mechanism for alerts that allows individual actions of fitlering
The 2 features above are only 2 of the new features that have been added in 5.0 and 5.1 that apply both of promiscuity and online modes.
Maybe you are looking for
-
I have Window XP. I have the .NET Framework 3.5 and 4.0. Among the programs I need net framework v 1.1. What can I safely intall net framework v 1.1 rund some of my programs without affecting my computer and because of problems with Net Framework
-
WD smartware my essential book register when it is set to usb__
so, how can I gt it started
-
Can ping printer but cannot print
Hi allNot sure if this is the right forum, but it is a network printer, so I thought I would try it. My apologies if it should be elsewhere. I have here a user who is trying to print to a printer Samsung CLX-6200 from anywhere in Windows 7 (even a te
-
How can I block files with a certain file UCM 11 g extension
HelloHow can I block files with a certain extension of Oracle Webcenter content 11.1.1.8 file?
-
What is an orphaned member?
Can someone please explain what an orphan Member? I work in 11.1.2.3, a typical application with a single BSO. We have also several applications of essbase stand alone (planning). I'm not sure what constitutes a member "orphan." The Oracle documentat