Cryptographic IOS image loading

Similar Questions

• disable hardware acceleration set my image loading problem. is there another way to get around this?

  System details:
  OS: Windows 8.1 Professional (64-bit)
  Graphics card: PNY NVidia GT 610 (2 GB)
  RAM: 5 GB
  Firefox version: 36.0 (32-bit)

  Since yesterday, when the images would load on Web sites, some of them would be entirely black, or black for the most part, with only a piece of the images loaded, only to fully charge a few minutes later.

  Disabling hardware acceleration has solved this problem, but reduces the overall performance of firefox. Is there another way to work around this problem, not to mention that disabling hardware acceleration?

  Note: The only 2 things I have tried have been reset firefox and a new installation of firefox. I don't want to lose my data of the addon and the custom settings of firefox, because it takes too much time for me to put them back where they are now.

  I'm also pretty computer savvy, if you can get quite technical with me. If I don't understand something, I ask.

  
  

• I can't the new 9.3 iOS to load. Stops after verification. Says he has no Internet, but it does.

  I can't the new 9.3 iOS to load. Stops after verification. Says he has no Internet, but it does.

  Never had this problem with the latest updates!

  Apple released the update iOS 9.3 for some devices (air of iPad and previous iPhone, 5 s and previous) due to problems with activation. You may not be updated until a patch is issued. I recommend to wait for some time (days?) before trying again.

  See this article for more details.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  This article summarizes some of the problems with the update

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• Images on the screen in the list update only after scrolling to the rank of the list instead of updating automatically after each image is uploaded (delayed image loading)

  1. I started a lazy image loader to download images in drawListRow and passed the url of the image to download reference.

  2. After downloading the respective bitmap in the lazy image loader, I cancelled the list (called by using a reference to the screen where images are to shoot) using a thread event as follows:

      UiApplication.getUiApplication().invokeLater(new Runnable() {
              public void run() {
                  _list.invalidate();
              }
          });
  

  But my images are updated on the screen until I scroll over the line in the list.  I also tried to use _list.invalidate (index) to invalidate each line once the image is drawn to this particular line, but it does work and does the same thing as _list.invalidate ().

  I want the images to be updated without scrolling, and as soon as they are downloaded. How do I get there?

  Valuable contributions will be highly appreciated.

  UiApplication.getUiApplication () .invokeLater (new Runnable() {public void run() {_list.invalidate ();})            }        });

  use invokeAndWait instead of invokeLater and check if it works or not?

• IOS image using TFTP

  Hi all

  I have several 2950,2960,3550,3750 Switch

  they performed old IOS (I don't know the exact version, but I'm sure they don't support all the features and upgrade to the image of EI and newer)

  so I saw two articles

  http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-...

  and

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst2960x/software...

  -----------------------

  so my question is to upgrade my ios to new version can I use two commands? and what is different between each CLI?

  Command1:

  first---> delete flash:

  then:

  Copy tftp flash:

  IP:

  name:

  .....

  order 2:

  Archive Download-sw [directory] / crush/recharging tftp:[[//location]/directory]/image-name1.tar [image-name2.tar image image name3.tar - name4.tar]

  So what is or what are the different between 2 commands above?

  can I use two of them or not?

  --------------------------------------------------

  question 2:

  How can I download the latest version of cisco layer 2 switch (2950, 2960) and layer 3 (3550,3750)?

  How can I find out what are the different differ between the two IOS image?  only I need (* .bin) no CMS (* .tar)

  Best wishes

  Thank you very much

  Hello

  I'll give you the method that I use to upgrade the L2 or L3 switches:

  1 install the new image of page Web of Cisco (cisco.com--> support--> DOWNLOAD), I advise you do not install the last being rather install the recommended. (It will have a star next to it)

  2. check if the version that you have installed if it has bugs.

  3. install a TFTP server on a computer that has access to an IP address on the switch (example: you can configure an IP address for management by using the command "Int Vlan")

  4 - Check the Flash on the switch by using the command "show Flash" to make sure that you have enough space.

  5 put the image in the folder root of the TFTP server on your computer.

  6. question a copy SERVICE TFTP to make a backup of your configuration. (it is always good to do a backup)

  7. issue a copy TFTP Flash to make the image to be copied on the FLASH of the switch.

  8-do a "show run | "I boot" to see images of starting on the switch.

  9. do 'no boot system XXXXX"to the old images essentially copy the output of the command in step 8 and just put none initially.

  10. do 'boot system THENEWIMAGE.

  11 - this step is not required but I highly recommend it, you can add the old image using 'boot system OLDIMAGE' he will place the old image as a secondary image just in case where for some reason any main image does not start.

  12 save changes using "copy run start".

  13 - reload

  14. use the 'view version' to ensure that the new version is in place.

  It is the process of upgrading the software on the switch. It will be useful.

  Note: Make sure that you have console access to the switch before performing the upgrade, just in case something goes wrong.

  Best regards

• iOS image support ssh

  Hello dear

  Please can you tell me the image ((c2960-lanbase - mz.122 - 53.SE1.bin)) support the ssh or not?

  If not what ios image can I charge for the 2960 G switch to support ssh.

  Thank you

  Hello sajjad_m1987,

  C2960-lanbase - mz.122 - 53.SE1.bin does not support ssh.

  You will need the crypto image that has the k9 in the name.

  C2960-lanbasek9 - mz.122 - 52.SE.bin

  You can go to the following link to search the ios which supports the functionality that is necessary.

  http://Tools.Cisco.com/ITDIT/CFN/JSP/by-feature-technology.jsp

  Hope this helps,

  If Yes, please rate.

• Cisco NetFlow and required IOS image

  Hello team Netpro-

  I am preparing the documents concerning the deployment of Netflow version 5 for about 20 sites around the world. I would like to know what IOS images can support this technology. Currently, some of our routers run the following IOS Images:

  (C7200-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)

  (C2800NM-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)

  (C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)

  (C3825-SPSERVICESK9-M), Version 12.4 (6) T2, RELEASE SOFTWARE (fc1)

  (C7200-IS-M), Version 12.4 (7), VERSION of the SOFTWARE (fc6)

  Don't you think that we still need an IOS update or not?

  Thank you in advance.

  Jay

  Also the information provided by the previous poster, I don't think you need to upgrade with the current images, that you have running, most SPSERVICES k9 images 12.4 versions take support netflow.

  I also suggest go on this link, and the link provided in front of me.

  http://www.Cisco.com/en/us/docs/iOS/12_4/NetFlow/configuration/guide/onf_gsg.html#wp1043332

  You can check in the search of features here in feature navigator http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

  Another simple way to check is by typing a question mark to the cli without entering the command on routers.

  example for this script very basic bellows on a router netflow put an exclamation mark without actual setting command

  interface

  IP route-cache?

  route IP cache flow

  Router (config) #ip import-export flows?

  Router (config) #ip flow-export versions?<-- should="" show="" all="" the="" versions="" supported="" 1,5,9,="">

  Router (config) #ip flow-cache timeout?

  stream of Router (config) #ip - high -?<--- for="" top="" talkers="">

  IP flow-export destination

  IP flow-export version 5

  IP flow-cache timeout active 1

  flow-cache IP 15 idle timeout

  IP high speed-flyers

  Top 10

  Sorting bytes

  (C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)< ---="" this="" one="" should="" also="" be="" able="" to="" support="">

  PLS note any useful message if it helps

  Rgds

  Jorge

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• Differences in the IOS images

  Can someone point me to a link where it clearly shows the differences between images of IOS? For example how IP Base differs from Advanced IP Services for example but not limited to just this comparison? The Cisco site, where you can click on this button to show the differences don't seem to work. Thank you.

  Wrong forum really but here is a good description:

  http://nettipps.de/2010/06/09/ciscos-iOS-image/

  What about Simon
  http://www.linksysinfo.org

• only a few images load up to

  Hi - I'm having a problem with images not loading with lightroom 6. Only a few seem to them nor do. I'm running off lightroom 6.0. It may be I need to upgrade to the latest version, but I can't see how I can do that nothing is obvious!

  Help, please!

  adrianf75993787 wrote:

  I opened an old case of LR that has been updated for LR6 and only a few images load upward. There is no error message it is as it is normall is when you have to wait a few seconds for the images appear, but with this rare appear and most remained empty. I tried attached a screenshot, but I do not see how to attach to this message!

  You can attach the screenshot using the icon insert a picture (in a browser web, you cannot attach a screenshot by e-mail)

  

• Why my images load as a solid blue image?

  I use the latest version of Lightroom CC and upgrade to a new PC running Windows 10. When I open lightroom none of my images are loading. Surveys along the bottom and top left load perfectly however the main image loads only as a solid blue box. Y at - it something I am doing wrong or is this a bug that comes arises?

  Try turning off the GPU acceleration. Go in Edition > Preferences and on the performance tab, uncheck the box. If this solves the problem, click on to learn more about troubleshooting information page. You may need to update the graphics driver.

• Weird Image loading Glitch on mobile site

  So I just publish my site that I exported to Muse on Dreamweaver.

  I am faced with this very strange loading glitch that happens only on the tablet/mobile version (office works very well) where sometimes the images load with a strange problem:

  

  It is only when I wipe my phone web/on historical data are loading images, but even in this case, other images are starting to act up.

  thosesixfaces.com

  Thank you!

  I have not checked on a mobile device, but what follows is not admissible

  "images/title.png" alt = "" " width="369"height ="61"/ >"

  To make them sensitive look here Responsive Web Design Images or Google the topic.

• How to make an image loader similar to those given in the opening program?

  I'm looking to build an image loader, which at the beginning of my script opens and closes automatically after a few seconds. I opened the image processor script to see how Adobe has added images to the alerts, but it's a vast doc and I couldn't tell where the image was being shot, as shown only variable twice and is called only, and do not set. Also is there another other than the alert method to call a box like this? I would have preferred there do not have buttons.

  This script shows how to open a ScriptUI dialog box and fill it with an image.

  http://PS-scripts.CVS.sourceforge.NET/ViewVC/PS-scripts/Xtools/Xlib/PreviewWindow.jsx

  He, however, was a "close" button to close the window. If you want to automatically close the dialog box

  After a period of time, you will need to change to openFile to something like this:

  var sleepMS = 3000;  How long to sleep in milliseconds

  PreviewWindow.openFile = function (file, w, h, parent, title) {}
  var win = new window ("palette", title |) "Preview:" + decodeURI (file.name)); "."
  win.closeBtn = win.add ('button', undefined, 'Close');

  Win.Preview = win.add ('image', undefined);
  Win.preview.Icon = file;

  If (w & h) {}
  win.preview.preferredSize = [w, h];
  }

  If (parent) {}
  Win.Center (parent);
  }

  win.closeBtn.onClick = function() {}
  This.parent.Close (1);
  }

  Win.Show ();

  $.sleep (sleepms);

  Win.Close ();
  Remove win;
  $. gc();
  };

  usage example

  PreviewWindow.open("~/tmp/preview.jpg");

  I have not tried this code, but it seems pretty close.

• Change the image loading of counting

  Hello
  I want to change the image to my custom default image loading. There are a few style class availabe.
  
  AF | document: splash-screen.
  AF | document: splash-screen-cell
  AF | document: splash-screen-content
  AF | document: splash-screen-icon
  AF | document: splash-screen-message
  
  
  Can someone tell me what class style to use to change the loading image?
  
  Thank you
  $N
  
  Published by: Sidibé Gandhi on May 4, 2011 06:58

  Change this entry for skin. the following excerpt comes from a skin of fusion style - desktop.css

  / * Splash screen icon * /.
  AF | document: splash-screen-icon {}
  content: url(/afr/ss.gif);
  Width: 43px;
  height: 48px;
  vertical-align: middle;
  }

• Failed to instantiate a .png image loaded

  Hello

  No matter how hard I try, nothing works.

  1 moving an instance of charger for a container movieclip returns a constraint error.

  2. displacement of the image loaded to a container of MC object produces no errors, but remains a bitmap object.

  3 method BitmapData.Draw () appears to require an image bitmap or bitmapdata destination object.  I need a symbol instance.

  Any other ideas?

  Ron

  I don't know what theTween done but, perhaps, is what you need to do:

  theTween.addTarget (loadedBitmap.bitmapData);