IOS image using TFTP

Similar Questions

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• Cryptographic IOS image loading

  I received the following error message when you try to load an IOS image k9 on one of 2960 switches.  Can someone tell me how to solve this problem?

  Error: The image must be installed on the system 1 ('c2960-lanbasek9 - mz.122 - 52.SE')
  Error: is equivalent to an existing image and the option "/ overwrite.
  Error: was unsuccessful.  Try again, or by deleting the old image
  Error: first of all, or by selecting the option ' / overwrite.

  Almost forgot the command I used was: arc download-sw/Safe tftp://10.xx.xx.xx/c2960-lanbasek9-tar.122-52.SE.tar

  Thank you

  GLH

  You try to switch with the exact same IOS.

• Force10 S4810P start endless loop when you try to start using TFTP

  The image I have on the machine is damaged and will and therefore no longer starts. So I downloaded the image of the site of Force10 already on this device. (AFP - SE - 8.3.7.0.bin) and this is what I see.

  -Online boot
  The main line of seed starting...
  ENET 100BT/FD from
  Speed: 100, full-duplex
  ETSEC3 device using
  TFTP server 192.168.0.21; Our IP address is 192.168.0.23
  File name ' OTF - SE - 8.3.7.0.bin'.
  Load address: 0 x 6400000
  Loading: #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  ###########################################
  fact
  Bytes transferred = 22571135 (158687f in hexadecimal)
  WARNING: setting the memory available for 30000000
  # Boot the kernel of the Image of the legacy at 064000f0...
  Image name: netbsd
  Image type: the NetBSD's PowerPC kernel Image (gzip compressed)
  Data size: 7416792 bytes = 7.1 MB
  Load address: 00100040
  Entry point: 00100040
  Checksum checking... Ok
  Image of the core decompression... Ok
  CPLD: HW Watchdog disabled
  # The control transfer of NetBSD stage charger 2 (address 00100040)...

  The core dump information is sent @ 0 x 84000

  Copyright (c) 2005-2010 Force10 Networks, Inc. All rights reserved.
  Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
  The NetBSD Foundation, Inc. All rights reserved.
  Copyright (c) 1982, 1986, 1989, 1991, 1993
  The regents of the University of California. All rights reserved.

  Force10 Release 8.3.7.0
  NetBSD 1.6.1 (S4810) #0: Thu Dec 16 11:56:36 PST 2010
  Build@build-SJC-74: / work/build/buildSpaces/build19/E8-3-7/SW-NetBSD/usr/src/sys/arch/bacardi/compilation/S4810
  Model: Freescale Semiconductor CDS
  total memory = 2048 MB
  to use memory = 1960 MB
  using pads of 2000 containing 8000 KB of memory
  boot device:
  root on discharges md0a on md0b
  inittodr: RTC absent - CHECK AND RESET THE DATE.
  type of root file system: ffs
  LD0 to sdmmc0: 8 GB MID: 0x61 OID: 0x4e4c S/N: 0xb411f3

  LD0: 4065 cyl, 64 heads, s 63, 8003 MB, 512 bytes/sect x 16390144 sectors
  ignoring SIGQUIT SIGTSTP and SIGINFO

  Seizure of Jumpstart app:
  The initialization of the runtime directories
  JumpStart: initialization of the network is located in the boot line
  Add a 192.168.0.23 host: gateway 127.0.0.1
  Add net 192.168.0.23: gateway 192.168.0.23
  Add net 0.0.0.0: gateway 192.168.0.1: network is unreachable
  TFTP 192.168.0.21
  binary mode
  get the OTF - SE - 8.3.7.0.bin /force10/rd/tgtimg/FTOS-SE-8.3.7.0.bin
  TFTP: sendto: cannot assign requested address
  TFTP > tftp > tftp > boot Cp: ExtractReleaseHdr failed: err = 0
  start-up of CP: CheckReleaseImage: ExtractReleaseHdr failed
  TFTP 192.168.0.21
  binary mode
  get the OTF - SE - 8.3.7.0.bin /force10/rd/tgtimg/FTOS-SE-8.3.7.0.bin
  TFTP: sendto: cannot assign requested address
  TFTP > tftp > tftp > boot Cp: ExtractReleaseHdr failed: err = 9
  start-up of CP: CheckReleaseImage: ExtractReleaseHdr failed
  TFTP 192.168.0.21
  binary mode
  get the OTF - SE - 8.3.7.0.bin /force10/rd/tgtimg/FTOS-SE-8.3.7.0.bin
  TFTP: sendto: cannot assign requested address
  TFTP > tftp > tftp > boot Cp: ExtractReleaseHdr failed: err = 9
  start-up of CP: CheckReleaseImage: ExtractReleaseHdr failed
  synchronization of disks... done
  reset

  ---------------------------------------------------------------------------------------------

  That's how I env boot. installation program.

  -Online printenv
  BootDelay = 5
  BaudRate = 9600
  loads_echo = 1
  eth1addr = 00:E0:0 C: 02: 01:FD
  eth2addr = 00:E0:0 C: 02: 02:FD
  eth3addr = 00:E0:0 C: 02: 03:FD
  pre-launch = mii write 0 x 1 0x1c 0xfcad; Mii write 0 x 1 0 x 00 0 x 0140; Mii write 0 x 1 0x1c 0xfcac; Mii write 0 x 1 0x1c 0xb4ef;
  RootPath = / opt/nfsroot
  host name = unknown
  LoadAddr = 6400000
  uboot_filesize = 0 x 80000
  tftpflash = tftpboot $loadaddr $uboot; protect the 0xfff80000 + $uboot_filesize; erase the 0xfff80000 + $uboot_filesize; CP.b $loadaddr 0xfff80000 $uboot_filesize. protect on 0xfff80000 + $uboot_filesize; CMP.b $loadaddr 0xfff80000 $uboot_filesize
  ethact = eTSEC3
  ethaddr = 00:01:E8:8 B: 13:8 D
  mgmtautoneg = true
  mgmtspeed100 = true
  mgmtfullduplex = true
  uboot = u - boot.bin
  158687F = file size
  fileaddr = 6400000
  gatewayip = 192.168.0.1
  IPAddr = 192.168.0.23
  ServerIP = 192.168.0.21
  secondary_boot = f10boot tftp://192.168.0.21/FTOS-SE-8.3.7.0.bin
  primary_boot = f10boot tftp://192.168.0.21/FTOS-SE-8.3.7.0.bin
  default_boot = f10boot tftp://192.168.0.21/FTOS-SE-8.3.7.0.bin
  stdin = series
  stdout = series
  stderr = series
  bootcmd = echo Booting main line boot...; $primary_boot start; echo Failed; echo Booting secondary line of boot...; $secondary_boot start; echo Failed; echo Booting default line boot...; $default_boot start; echo Failed; echo restarting...; reset

  The environment size: 1218/8188 bytes
  =>

  I do not have a guarantee of current on this unit, any help would be most appreciated. If more information is needed please let me know and I will it get to you.

  OK, I was able to get the unit to start all the way using the image that is on the flash. I had to remove the startup for the gateway, the system and the tftp server configuration information. Once I did the unit booted all the way. Now to upgrade this thing.

• Cisco NetFlow and required IOS image

  Hello team Netpro-

  I am preparing the documents concerning the deployment of Netflow version 5 for about 20 sites around the world. I would like to know what IOS images can support this technology. Currently, some of our routers run the following IOS Images:

  (C7200-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)

  (C2800NM-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)

  (C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)

  (C3825-SPSERVICESK9-M), Version 12.4 (6) T2, RELEASE SOFTWARE (fc1)

  (C7200-IS-M), Version 12.4 (7), VERSION of the SOFTWARE (fc6)

  Don't you think that we still need an IOS update or not?

  Thank you in advance.

  Jay

  Also the information provided by the previous poster, I don't think you need to upgrade with the current images, that you have running, most SPSERVICES k9 images 12.4 versions take support netflow.

  I also suggest go on this link, and the link provided in front of me.

  http://www.Cisco.com/en/us/docs/iOS/12_4/NetFlow/configuration/guide/onf_gsg.html#wp1043332

  You can check in the search of features here in feature navigator http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

  Another simple way to check is by typing a question mark to the cli without entering the command on routers.

  example for this script very basic bellows on a router netflow put an exclamation mark without actual setting command

  interface

  IP route-cache?

  route IP cache flow

  Router (config) #ip import-export flows?

  Router (config) #ip flow-export versions?<-- should="" show="" all="" the="" versions="" supported="" 1,5,9,="">

  Router (config) #ip flow-cache timeout?

  stream of Router (config) #ip - high -?<--- for="" top="" talkers="">

  IP flow-export destination

  IP flow-export version 5

  IP flow-cache timeout active 1

  flow-cache IP 15 idle timeout

  IP high speed-flyers

  Top 10

  Sorting bytes

  (C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)< ---="" this="" one="" should="" also="" be="" able="" to="" support="">

  PLS note any useful message if it helps

  Rgds

  Jorge

• How to make a zoom in on part of the image using editing?

  Recently returned to the opening.  Do not remember how to enlarge the part of the image using editing.  If the answer is Loupe tool, please remind me how it works.

  What version of Aperture do you use?

  To zoom the viewer enter the combination of keys command - + (⌘ +) or press the zoom-viewer:

  

  If you prefer the magnifying glass, launching it from the view menu with "view Magnifier, where also find magnifying glass options to switch to a centered Loupe or show the grid under the microscope.

  

• pouvez iphone with ios 9 use bluetooth 4.1 5

  pouvez iphone with ios 9 use bluetooth 4.1 5

  Hello ajwaka,

  After reviewing your post, it looks like you want to know if the 5 s iPhone supports Bluetooth 4.1. I recommend you to read this article.

  iPhone 5 s - technical specifications

  Cell phones and wireless

  • Wireless Bluetooth 4.0 technology

  Thank you for using communities of Apple Support.
  Good day.

• Vectorize an image using Labview

  Hello world!

  So, I work with a 3D cutting machine (Roland MDX - 15) and I'm supposed to design a program that can load images and burn them on a piece of wood using Roland MDX - 15.

  What I've done, is to create a program where you can draw a picture using the tools of sketch of Labview and the machine will sculpt.

  The machine is capable of carving the image using vectors (she follows lines point by point).

  Now, I have to do the same thing, but an image that I have load in Labview. Therefore, I need to vectorize the image so that the machine gets a set of lines to draw. A program that is already it is Dr.Engrave (see youtube if you need to understand what I need).

  So, anybody know a 'simple' way to transform an image into a set of vectors?

  Thanks in advance!

  Valentine

  Hello VGans,

  I assumed that when you talk of tracing any edge detection method would be allowed to help you get started.

  If it is a false assumption, then let me know.

  Keeping this in mind:

  Already taken a peek at the "IMAQ CannyEdgeDetection' VI?

  This could be a good starting point for tracing purposes.

  Can you let me know if that's what you're looking for?

• some computers cannot acquire images using the PCI-1410

  I have a big problem in the acquisition of the images using the PCI-1410.

  It was a standard camera (SONY XC-ES). The test of the device is OK with my computer.

  I can not get a correct image via MAX. Also, I try to use the file of the camera for that camera.

  But it did not work properly.

  I consulted it toward the Korea of NEITHER and they discover THAT PCI-1410 worked properly with different computers.

  So, I try to change PC. Most of my computers cannot acquire the image even if the unit is OK of MAX.

  However, only a few computer works properly. (Work computers are from SAMSUNG. The other

  computers that did not work propely, were assembled in the lab.) (I have tested almost 6 computers for this purpose.)

  The problem is that there are at least 3-4 PCI ports for our applications. The work computer (SAMSUN) only has 2 ports PCI.

  What should I do to select the right computers? I can't buy dozens of computers to test the PCI-1410.

  Why is this kind of problem occurs?

  Thanks in advance for your advice. (Email: [email protected])

  Hello

  We also had a lot of problems in the past with different PCs and the problem came from the motherboard. Since that time, we only use motherboards with intel because we know that labview works very well with them.

  It was 2 or 3 years ago, and I thought that the problem has been resolved since then... you know the type of motherboards you use?

• How do write an image bank 2d images using maton indexing or other type of indexation. Please help me, I'm stuck my project with this problem?

  Dear friends,

  I'm in a phase of my project of mtech evil. How can make a large image 2d draws from small images by indexing. (just like arrays\matrix, etc.). I have only 16 small images in my library. I want to do the big picture of mosaic of smaller images with appropriate indexing. I think to make a large image in Formate of table 2d (100 * 100 images) of small images using indexing. Anyone CAN HELP me IT WILL REALLY appreciable

  URS faithfully

  Ragil

  The question is more how you want that they be indexed like that?

  1 > 2 > 3 >... > 15 > 16 > 1 > 2...

  5>6>......

  or

  1 > 2 > 3 > 4 > 5

  2 > 3 > 4 > 5

  3 > 4 > 5

  4 > 5

  5

  or another type of indexing

• Continuous imaging using vision builder

  Hello, I use NI 1744 and want to know how to get and record continuous images using Vision Builder. I am in a position to acquire and maintain a single image but cannot acquire continuous images.
  Looking forward for your help.

  Bürki,

  You try to save the images continuously as a movie?  This is not supported in VBAI, however if you want to align continuous images individually you can try to change your pattern of State inspection to repeat your current inspection and the transition to the stage stop only after that your current inspection was conducted a defined number of times.

• Which is faster a bit manipulation to the table or image using the vision

  I have to perform an operation on an image.  It involves the calculation of the new locations for the pixels for each pixel of the image.  Which is the fastest way to do it.  Manipulate the pixels as elements of the array for loops, or manipulate the pixels of an image using vision tools?

  Thank you.

  Hello

  If you can use vision tools to make the manipulation of pixels, it is much faster.

  Vladimir

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• How to make an image using the camera on my pc

  I want to take a picture of my laptop but cannot find the button

  Hi carolewyne

   

  1. What are the brand and model of the laptop?

  2. you have software installed for the camera to use?

   

  If you want to take a photo using the camera in the phone, then maybe you should use a utility support for the device that is provided by the manufacturer. It will help you get the image using the camera. You can visit the manufacturer's Web site and download the software for the device is functioning correctly.

   

  I hope this helps.

• How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  ====================================
  Sometimes the only resizing is not the answer because the
  the original size is different from the print size.

  You may need to crop photos to the size you want
  print to ensure that no clipping will occur. Cropping
  to a different aspect ratio will lose some parts of the picture but
  at least you have control over it.

  Windows Live Photo Gallery is a cropping tool.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.