Cisco NetFlow and required IOS image

Similar Questions

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• My iPod Touch 4th generation cannot be upgraded beyond ios 6.1.6 and podcast Apple app requires ios 7.1 or later version.  Is there another app, workaround or solution that would allow me to download podcasts on Itunes?

  My iPod Touch 4th generation cannot be upgraded beyond ios 6.1.6 and podcast Apple app requires ios 7.1 or later version.  Is there another app, workaround or solution that would allow me to download podcasts on Itunes?

  You should be able to get the latest compatible version of the app Apple Podcast and other apps too:

  From when iOS 7 was released, Apple can now download the latest compatible version of some applications (iOS 4.2.1 and later only)

  Install the latest compatible version of an application on a previous version of iOS or OS X

  App Store: Download the old Versions applications

• I would like to implement Cisco Security Manager demo and requirement, I have about 500 devices

  I want to implement Cisco Security Manager .demo and requirement, I have about 500 aircraft and which is sutabale also want to access VPN management

  And what is your question?

• My imac crashed and required a new hard drive. I have downloaded lightroom again but my library of images is gone

  My imac crashed resulting in a new hard drive. I downloaded Lightroom 4 according to the previous disc but none of my old photos are here

  Hello

  You must copy the library Lightroom (.lrcat) file and the original images from your Time Machine backup disk. If you have not created a backup on a separate time Machine unit (or other backup processes) of your iMac, then you're probably out of luck, unless the defective hard drive can be recovered.

  Best regards, Brad

• IOS image using TFTP

  Hi all

  I have several 2950,2960,3550,3750 Switch

  they performed old IOS (I don't know the exact version, but I'm sure they don't support all the features and upgrade to the image of EI and newer)

  so I saw two articles

  http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-...

  and

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst2960x/software...

  -----------------------

  so my question is to upgrade my ios to new version can I use two commands? and what is different between each CLI?

  Command1:

  first---> delete flash:

  then:

  Copy tftp flash:

  IP:

  name:

  .....

  order 2:

  Archive Download-sw [directory] / crush/recharging tftp:[[//location]/directory]/image-name1.tar [image-name2.tar image image name3.tar - name4.tar]

  So what is or what are the different between 2 commands above?

  can I use two of them or not?

  --------------------------------------------------

  question 2:

  How can I download the latest version of cisco layer 2 switch (2950, 2960) and layer 3 (3550,3750)?

  How can I find out what are the different differ between the two IOS image?  only I need (* .bin) no CMS (* .tar)

  Best wishes

  Thank you very much

  Hello

  I'll give you the method that I use to upgrade the L2 or L3 switches:

  1 install the new image of page Web of Cisco (cisco.com--> support--> DOWNLOAD), I advise you do not install the last being rather install the recommended. (It will have a star next to it)

  2. check if the version that you have installed if it has bugs.

  3. install a TFTP server on a computer that has access to an IP address on the switch (example: you can configure an IP address for management by using the command "Int Vlan")

  4 - Check the Flash on the switch by using the command "show Flash" to make sure that you have enough space.

  5 put the image in the folder root of the TFTP server on your computer.

  6. question a copy SERVICE TFTP to make a backup of your configuration. (it is always good to do a backup)

  7. issue a copy TFTP Flash to make the image to be copied on the FLASH of the switch.

  8-do a "show run | "I boot" to see images of starting on the switch.

  9. do 'no boot system XXXXX"to the old images essentially copy the output of the command in step 8 and just put none initially.

  10. do 'boot system THENEWIMAGE.

  11 - this step is not required but I highly recommend it, you can add the old image using 'boot system OLDIMAGE' he will place the old image as a secondary image just in case where for some reason any main image does not start.

  12 save changes using "copy run start".

  13 - reload

  14. use the 'view version' to ensure that the new version is in place.

  It is the process of upgrading the software on the switch. It will be useful.

  Note: Make sure that you have console access to the switch before performing the upgrade, just in case something goes wrong.

  Best regards

• This app requires iOS 8.0 or later version

  Just checked my phone for the software update and I am told that my iOS 7.1.2 software is up-to-date. When I try to download apps, different from those different tell me: this app requires iOS 8.0 or later version.  Can someone explain this? I'm just outta luck?

  An iPhone 4 cannot be updated past 7.1.2. If you wish, download the current versions of these applications from a computer or a more recent iOS device, click hereand try the instructions.

  (138312)

• Reference Dell m2 / NVME specifications and requirements to upgrade for Optiplex, Latitude, XPS and Precision Mobile

  Good daycommunityof Dell.

  Because of your issues, I am pleased to present the information, specifications and requirements for m2 on various models of Dell below.

  Precision 7710:

  Internal dives supported: 3

  Lead taken configurations supported (max): 3 x m2 or m2 2 x and 1 x 2.5 in SATA.

  7710 PCIE lanes:

  2 m2 slots available are wired in 4 X

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches of 7710 7510:

  1 x 745TM 2.5 inches metal support - most of the units will have this already included

  1 x Y1WJX Support of m2 (goes inside the 745TM)

  4 x 2864 D Screw M3x3. Most systems will have these already included. These screws hold support unit of Y1WJX m2, or a record of 2.5 inches in 745TM.

  1 x WPTND Infill of the m2. This installs in the support of Y1WJX m2.

  5 x 4270E M2.0 * screw 3 L

  1 x HR8P8 Cover thermal m2

  Find instructions here on the Dell Community.

  Precision 7510:
                                                                                                                  
  Internal dives supported: 2
                                                                        
  Drive the supported configurations: 1xM.2, 1x2.5 SATA, 2xM.2, 1xM.2 and 1x2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches are the same as the 7710 above.

  5510 precision and XPS 9550:

  Internal dives supported: 2

  Drive the supported configurations: 1 x m2, 1 x 2.5 SATA, 1xM.2 and 1 X 2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired like SATA

  Parts needed to install a m2:

  1 x 88DJK thermal pad (no plate required)

  1 x 4270E  Screw M2X3

  Parts needed in order to add a 2.5-inch disk:

  1 x XDYGX cable

  insulator side 2 x 3XYT5 rubber

  HARD drive 1 x 3FDY3 metal support (some units may already have this even if a disk 2.5 inch was not originally ordered from Dell)

  Discussed here on the Dell Community.

  Precision 3510:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  M.2 housing supports 4 x

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2:
  

  1 x X3YR8  Support for end of m2

  1 x 1X2MT thermal cover

  2 x 4270E  Screw M2X3

  Discussed here on SpiceWorks.

  Latitude E5270, E5470, E5570:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  E5270 supports 2 x
  

  E5570 with CPU: supports 4 X

  E5570 with processor U supports 2 X
  

  E5470 with CPU: supports 2 x
  

  E5470 with processor U supports 2 X
  

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2 is the same as above 3510.
  

  Latitude E7270, E7470:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  M.2 housing supports 2 X

  Parts needed to upgrade to IS:

  1 x DJ69P thermal cover

  2 4270E x screw M2X3 (most systems will have at least one of them already included)

  Discussed here on SpiceWorks.

  13 9350 XPS:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  The available m2 slot supports up to 4 X

  Parts needed:

  1 x 4270E screw M2X3

  OptiPlex 5040, 7040 (Mini Tower):

  Internal dives supported: 2

  Drive configurations supported: 1xM.2, 2xM.2, 1xM.2 and 1x2.5, 2x2.5, 1x3.5

  PCIE lanes:

  The single on board the M.2 slot supports up to 4 X

  The m2 drive installed in 2.5-inch Bay: 2 x

  Necessary parts for the m2:

  Bay of m2 on motherboard:

  1 x thermal Pad J0N94 (installs on the motherboard in the drive of m2)
  1 x YYJF8 live M2X3.5
   
  2.5 inch Bay with m2:

  1 x Cable SATA 6J3FV
  1 x X9FV3 M.2/2.5 inch adapter Bay/caddy
  On the card mother m2 installation instructions found here.

  OS install notes:

  There is a storage updated driver to include PCIE support. (One that you have to install Windows see the drive during installation):

  Intel's most recent

  Dell package

  Driver Samsung

  See also: installing Windows 7 on a SKYLAKE system using MDT: http://www.dell.com/support/article/us/en/19/HOW11493/en

  Obtaining an ISO image:

  For some systems, you can get Dell operating system through Dell hosted image images

  Note: not all systems and service tags will have a picture available.

  Note: Although Dell hosted Images have USB3, they cannot understand the pilot of TSRI currently. (some may know this the pilot to F6). You will need to install the driver of TSRI manually during the installation process of Windows.

  Dell is currently working to add the driver to the TSRI Dell hosted images. No ETA on when this will happen right now.

  Discussed here on SpiceWorks.

  Other works in m2:

  Solid State Drives m2 in chipset Intel Skylake systems Imaging

  Only 1 Solid State Drive (SSD) seen on map stand

  SSD not detected at the start or restart on new precision 15 5000 (5510) or XPS 15 9550

  A PXE with M.2 Solid State Drives boot

  How to distinguish the differences between the m2 cards

  Greetings Ypyap,

  Thank you for your question.

  Yes, the Vostro 14 5468 does support M.2, according to my literature.

  You will need:

  1 x 3P44J m2 stand

  

  x 2 7CJG4 M2 * 2 live (I'm still confirming if cela good reference number)

  

• Network IDS Sensor/system and retrieval of Images

  Ok.. on this page:

  http://www.Cisco.com/Kobayashi/SW-Center/ciscosecure/IDs/crypto/

  Objective: I want to burn an image from the Images "system and recovering" rather than order a CD from recovery for IDS.

  Issues related to the:

  1 is it possible or not that you must order the recovery CD?

  2. I see that the files under 'System and recovery Images' are in the format tar.pkg. Is this based on Linux or Solaris? Can I use Red Hat Linux to extract this file and then burn it to a CD?

  3. If so, is - anyone know how to extract the file?

  -TKS.

  Answers:

  (1) No, you must order the recovery CD.

  (2) there are 2 types of files: System and recovery.

  The system Images (- sys-) are used only for the installation of sensors that support ROMMON (like the 4215 IDS, IPS-4240 and IPS-4255). The sensors supporting ROMMON have no CDROM drives, and so the image must be tftpd to the sensor through ROMMON.

  System Images are used for recovery after disaster where the compactflash/hard disk from the sensor has been severely damaged or a new white compactflash/hard disk was placed in the sensor.

  Recovery (r) - Inages updated only the probe recovery Partition. They must be installed from a running Application Partition. The .pkg is a special Cisco IDS application-specific extension. There are special methods for unpacking and installation of the unerlying files.

  In ordinary situations the user will constantly update their software to sensor by the normal process of upgrade using large updates (- shift-), minor updates (- min-), Service Pack (sp) - or Signature updates (-- GIS).

  It isn't that where the effective Partition becomes corrupt that a user must always start on the recovery Partition and load a new Partition of Application.

  Most of the users will never update their recovery Partition. Thus, users who have purchased the IDS-4235 for example with the 4.0 software (1) will be a 4.0 (1) recovery Image. If they later upgraded to 4.1 (1) and the experience of corruption then they can always start the recovery Partition and reload 4.0 (1). If they do not want to return to 4.0 (1) provide us a recovery Image to update the Partition recovery to 4.1 (1).

  The only time wherever a recovery CD is really necessary is when the user goes from 3.x, 4.x, because of the drastic change between the 2 versions, or if the recovery Partition has also been damaged, or if you use a blank hard drive.

  3.

  I don't think the recovery or System Images contains the files needed to create a recovery CD. If I just remember additional files have been added to the recovery CD to make it bootable, which were not necessary on the system image or recovery since they were based on a sensor that was already underway.

• iOS image support ssh

  Hello dear

  Please can you tell me the image ((c2960-lanbase - mz.122 - 53.SE1.bin)) support the ssh or not?

  If not what ios image can I charge for the 2960 G switch to support ssh.

  Thank you

  Hello sajjad_m1987,

  C2960-lanbase - mz.122 - 53.SE1.bin does not support ssh.

  You will need the crypto image that has the k9 in the name.

  C2960-lanbasek9 - mz.122 - 52.SE.bin

  You can go to the following link to search the ios which supports the functionality that is necessary.

  http://Tools.Cisco.com/ITDIT/CFN/JSP/by-feature-technology.jsp

  Hope this helps,

  If Yes, please rate.

• The difference between an image of system of sfr and sfr boot image

  Hi all

  I use ASA 5525-X with fire power module. I met 2 new concepts when I upgrade the software for my module of sfr, which is the image of the system and the boot image.

  I would be grateful if someone can tell me what is the difference between sfr and sfr boot image system?.

  Thank you!

  Hello

  You will need to run the boot image on ASA, so that the SSD is responsible with the SFR image. The system image must run SFR services thereon.

  Reference: http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-service...

  Kind regards

  Aastha Bhardwaj

  Rate if this is useful!

• The traffic load between the power of Cisco ASA and FireSight Management Center fire

  Hi all

  I have a stupid question to ask.

  Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

  Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

  Maybe you all have no idea to provide.

  It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

  Generally it is not a heavy load, however.

• Differences in the IOS images

  Can someone point me to a link where it clearly shows the differences between images of IOS? For example how IP Base differs from Advanced IP Services for example but not limited to just this comparison? The Cisco site, where you can click on this button to show the differences don't seem to work. Thank you.

  Wrong forum really but here is a good description:

  http://nettipps.de/2010/06/09/ciscos-iOS-image/

  What about Simon
  http://www.linksysinfo.org

• Cryptographic IOS image loading

  I received the following error message when you try to load an IOS image k9 on one of 2960 switches.  Can someone tell me how to solve this problem?

  Error: The image must be installed on the system 1 ('c2960-lanbasek9 - mz.122 - 52.SE')
  Error: is equivalent to an existing image and the option "/ overwrite.
  Error: was unsuccessful.  Try again, or by deleting the old image
  Error: first of all, or by selecting the option ' / overwrite.

  Almost forgot the command I used was: arc download-sw/Safe tftp://10.xx.xx.xx/c2960-lanbasek9-tar.122-52.SE.tar

  Thank you

  GLH

  You try to switch with the exact same IOS.

• And iPad iOS 10 Mini

  And iPad iOS 10 iOS 9.3.4 Mini iPad Mini

  And your question?