.ipa file does not sync to ipad when dropped into itunes.  without error message

Similar Questions

• ePrint 7510 does not recognize my iPad when you try to scan from printer iPad.

  The printer and the iPad are connected to the same wireless system. The iPad will print successfully to the 7510 on the wireless system, as well as by e-mail via the website of HP. The printer recognizes and list the computer from apple that was loaded with the drivers that came with the printer for analysis and sends the information scanned to this computer. Because the printer does not recognize my iPad, I tried to load the drivers on the iPad to the HP site. I received an error message saying safari can't down load the drivers. Is it not possible to scan from the printer to the iPad? Is there another procedure that works? Thank you.

  Hello

  To scan from your iPad, install and use the application of HP ePrint home & biz.

  You can initialize the app scan, scan from the front panel of the printer to an iPad is not supported.

  Follow the steps below to get the app:

  http://support.HP.com/us-en/document/c02775166

  And below, you can discover how to analyze to use it:

  http://support.HP.com/us-en/document/c02486319

  Kind regards

  Shlomi

• iPhone does not sync after updating IOS9.2 and iTunes 12.3.2

  My iOS iPhone 6s 9.2 Sync more after that I installed El Capitan on my macbook pro (because the iPhone 6s received the message in iTunes it is not taken in charge more by itunes 12.2 so I had to update) the only thing I get is a rotation beach ball...

  iTunes as such does not work properly, but when I connect one peripheral the spinner is here.

  I already uninstalled iTunes, reeinstalled but still the same issue. (I also tried with my iPad ios9.1 and same problem, so I think it's related to the iTunes 12.3.2 version)

  Anyone who can help me, I'm really nowhere after trying many things already... Thank you!

  I have a similar problem. My ipod touch will not be synchronized since the last update. The music page sometimes seems totally Virgin as if there is no music on the ipod, but shows then at other times. I'm not sure what the link is when I see the music or when the display is clear. What's worse, is that my iTunes on the computer only shows the list of songs, not playlists, so I can't edit or create new lists of reading.

• Dell coming 8 Pro loaded but does not or be recognized when plugged into PC.

  I drained the battery (yellow light) and responsible for the overnight with cord provided Dell and adapter, until white light. Now, it does not or be recognized when connected to my Dell PC.

  I ordered and new adapter and cord. Any ideas out there? Had this 3 months, with a few other problems.

  Perhaps I'm not following, but you try to have your desktop/laptop physically connected to the Dell Tablet for the Tablet is recognized on the desktop/tablet computer similar to a flash drive? As far as I know, this is not possible. You can, however, access to some of the files on your desktop computer Tablet / laptop (and vice versa) using Windows, if both devices are on the same network.

• test for DPS application to v32, the ipa file does not install on the iPad

  revised to v32, DPS SE application test does not install on the iPad using iTunes to synchronize the ipa file.  The icon is grayed out, and it just says 'installation', but does not end. Folio test OK in Adobe Content Viewer. Try to get this right for v32 and iOS8

  This means that you have used a .mobileprovision file that is not your UUID in there device. Make sure you use the right .mobileprovision file, and your device UUID has been successfully added to him.

  Neil

• Having problems with updating apps (V.32). The ipa file does not work correctly.

  Need help.

  Thank you

  Your mobileprovision file is incorrect or your certificate expired. See cannot install a developer .ipa file.

  Neil

• Windows media player does not at all. Help. There are no error messages either. Nothing happens, so that never, what

  Hello.

  The Windows media player 11 won't start at all. or, when I double click on a few pieces, it start but the icon, or use the local broadcasting company internet TV sites. I can't find links som for updates or anything.

  Hello

  Have you recently installed another player?

  Right-click on taskbar - process and see if WMPlayer.exe is already hidden. If the end then on her process.

  --------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html
  ----------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently installed another player?

  Reset your associations:

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Commenting in a protected pdf file does not work on iPad but on PC

  Hello

  I am just placing comments in a pdf document, document which is protected.

  Only extraction and modification of the composition are disabled.

  If I use my PC with Adobe Reader, everything works as expected.

  Only with Acrobat DC on my iPad, Annotations do not work.

  How can I change this behavior?

  Thanks in advance

  Chris

  P.S. the iOS 8.3

  Adobe Acrobat DC 15.0.3

  Security tab ob that is attached to my pdf file (sorry, only in German)

  Hi Chris,

  When various restrictions of document are applied to a PDF document, the PDF document will be encrypted/protected.

  Mobile products Acrobat DC (for iOS and Android) have the known limit where the changes cannot be saved in encrypted PDF documents.  As a result, users are not able to make changes (addition of comments/annotations or forms) for encrypted PDF documents.

  As you already know, there is no such limitation in the desktop version of Adobe Reader or Acrobat.

  Sorry for the inconvenience.

• A music file does not sync on my MP3 player, if .mp3 or .wma

  I am uisng WMP 12 on a Win7 system.  I sync a 100 of music files on my MP3 player without problem.  But a recent file syncs simply cannot.  The file was originally a .m4a file that I converted to .mp3 via iTunes.  I tried to synchronize as a .mp3 file but no luck.  I then converted it to .wma, but still not able to synchronize.  I tried to add to a playlist (successfully), but it still will not be synchronized.  I reformatted the MP3 player, resynced and still no luck.  Any ideas?

  Hello

  Good to know that the problem is solved. Let us know if face you any problems with Windows in the future.

• Windows Vista does not recognize my camera when plugged into USB port

  I recently had a problem with updates do not install it on my laptop Gateway 6840 running Vista. Community Microsoft guided me through a process that solved the problem and it worked fine. However, later, I tried to plug my Fujifilm AX560 into a USB port and the computer is no longer recognized. Ports recognize my memory sticks though very slowly. I tried a lot of previous solutions on Microsoft Community, but nothing has worked. Appreciate any help.  Thank you.

  Problem solved! I used sugestion of Shekhar S to use Microsoft Fix It only the second I had my camera is plugged in and turned on. Thanks Shekhar S and thank you Microsoft Community.

• My computer does not open in normal mode and I get an error message that short DST has failed, which is the error code 2000-0142

  It opens fine in safe mode, I took it back to 10/01/2011 as suggested, and the problem persists.

  On a Dell computer, it indicates a problem with the hard drive.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=DHS&docid=266787#HDD

  The reader will probably have to be replaced.

• OfficeJet pro 7680 does not use black ink. "alignment failed" is the error message.

  How can I solve this problem? I put a new ink in the printer, rebooted and still nothing. Thank you.

  Hello

  Try following the steps below to calibrate the linefeed, reinsert the printhead, etc.. :

  http://support.HP.com/us-en/document/c01957673

  If the problem persists with no change, I'm afraid you need to replace the Black / Yellow Printhead...

  As a general rule, any other value that only good health of print head indicates a problem with the condition of the print head...

  Given the fact that the print heads are already 3-4 years old (warranty ends about 2 years from the date of manufacture of printer), it might be time to replace the B/Y printhead.

  Kind regards

  Shlomi

• the Windows media player 12 does not convert to mp3 when synchronizing files

  I am using windows 7 ultimate x 64. The Windows media player 12 does not convert to mp3 when syncing library on my mp3 device files. But when I use windows vista with windows Media Player 11 it automatically convert. I missed something in windows media 12? or Windows media 12 does not have this feature?

  Thank you.

  Welcome to the Microsoft Answers site!

  Follow these steps and see if it's what you wanted;

  Configure a limit of Bitrate MP3

  1. in Windows Media Player 12, click on the menu to organize, and then click Options and select the tab plug-in.

  2. in the categorylist, select background.

  3. in the backgroundlist, select MGTEK dopisp and click on Properties.

  4. on the Conversiontab, check the MP3 from re - encode that exceed a limit of flowand choose an encoding rate and the rate limit.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I click on an RSS feed, I get this message. XML file does not appear to be any information of style associated with it... It works very well with Internet explore

  When I click on an RSS feed, I get this message. XML file does not appear to have any information of style associated with it. The same RSS feed works fine with internet explorer, any information would be helpful.
  Here are the first 3 lines from what I get

  < rss version = "2.0" >
  < String >
  < title >

  You open a new empty tab?

  Don't you see the text 'Click on the RSS buttonin the toolbar of navigation on this page?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode