IPA provides Question

Similar Questions

• Membership Provider questions

  I tried to use the providers of Oracle and have met with a number of bugs / problems.

  1. MembershipProvider.DeleteUser (userName, true) will always throw an exception unless the personalization of Oracle provider is installed.
  2. If a user is locked and ChangePassword, or ResetPassword is attempted, a ProviderException exception with the message "the provider returned an error that is not described by the other values of the enumeration MembershipCreateStatus." will take place.
  3. All packages and procedures are wrapped. Making it very difficult to inter operate with other products, e.g. APEX suppliers
  4. Providers do not support the Oracle.ManagedDataAccess.Client. I have a workaround, but it should work out of the box.

  I'll check on 1 and 2.

  3. the packages and procedures are supposed to be wound. The suppliers are not intended to be used as an SDK for other products or modified. They are intended to be used specifically in ASP.NET and its defined provider model.

  4. currently, providers are not compatible with managed ODP.NET.

• Before sowing a session Interview of Siebel

  Hello

  I have an obligation to use the OPA Maintenance Service. Not too shocking, but they want the OPA session for front seeding with Siebel data.

  Determinations of Siebel server now exposes a service of maintenance, but I don't see a clear way to reach the part prior to planting.

  In Siebel Web determinations (and the on-board version), it is quite an easy thing to do and a preset ID is given in the URL via a web service call incoming OPA is able to retrieve data and save it to Siebel once the interview is over.

  Given that the client wants to keep control over screens (for security reasons, they will not have to two secure applications, in addition, they already have their own UI environment), they want to use the Service.

  What needs to happen is:

  -OPA Interview Service session must be started.

  -' Something' must retrieve data from Siebel and seeds before the session of the OPA with these data.

  -L' interview was scheduled as usual with OPA providing questions.

  -Once the interview finished, the results must find their way back to Siebel.

  The above is something that is really easy with Siebel OWD but - I can see - will be more complicated through the maintenance service.

  More or less, I came to the conclusion it must be fairly custom work that must be done here but advice, tips, comments would be greatly appreciated.

  Thank you

  Evert

  To do what you want, you will need to write a maintenance Service customer who:

  1. Seed of Siebel data marshaled and sends it to the action log to open a new interview and load data
  2. Selects the purpose to study through the action of the list of objectives
  3. Heading the investigation through the action to investigate
  4. Gets the data in the Interview session by calling for action to get data from the user value, and then save this information to Siebel
  5. Closed the interview by calling for action to close a Session.

  There is detailed information on the session of the interview, including examples in the developer's Guide. See http://docs.oracle.com/html/E54502_01/toc.htm#Technical Reference/DS_Interview_Service.htm%3FTocPath%3DTechnical%20reference%7CDeterminations%20Server%20Services%7CInterview%20Service%7C___0

• How to create a contact form with captcha

  Hello

  I am new to Dreamweaver. I created a new site "bootstrap", but I'm stuck on the creation of a contact form for this.  I can probably understand the shape of DW, but have no idea how to add a captcha for security or how to install a program on the side server.  Can anyone help?    Thank YOU!

  the_shocker wrote:

  Dreamweaver does not features side server so this isn't a matter of Dreamweaver. You might be best to ask your server provider questions specifically related to a feature that is or is not enabled on your server.

  best,

  Shocker

  For the life of me I don't understand why anyone would go through the trouble of ringing these discussions just to get their best to not be useful.  It seems to me that since Dreamweaver allows you to create/write/upload php pages and the whole purpose of Dreamweaver is to create websites, and 80% of web sites using php, looks like a discussion of php in this Dreamweaver forum is quite appropriate!

  But that's just me.

  To my personal goal of trying to be helpful, I want to update this topic:

  The contact form is finally resolved.  I made a contact form with the beautiful shape of Nancy O at: Alt-Web Design & Publishing: Contact form sensitive with 3.2 Bootstrap and PHP (part 1)

  that has saved a lot of time, and I ended up hiring a developer at Fiverr (www.fiverr.com/abd_soft/write-fix-and-correct-your-php-script) which converted my existing script of SMTP mail.  He also created a redirect page slick for me for my old contact.htm page who turned into a contact.php page.  Of course, I've updated my site, but wanted the redirect in case there was some other links out there somewhere.

  I would like to paste the php code to be more useful, but the coding Manager put a copyright on the script that I paid for!

  If you try to install an authenticated SMTP contact form and you are not a developer, all I can say is GOOD LUCK.  I hope that my post is a bit useful.

• Replacement of material issue

  Hello

  Basic question

  What is needed for the replacement of two machines in i HA cluster running

  Update licens? Host migration? Etc., SAN CERT. current Licens are essential

  Have never replaced wmware before material cluster

  Need information in order to provide questions correct nothing else

  I'm not sure what you mean by "cert SAN."! Can you please explain this?

  On the ESXi licensing, licenses are usually managed by vCenter Server (this is where you should enter the license during the installation keys). To be sure, that there will be no problems with the number of licenses, place the host that you want to delete in maintenance mode, migrate virtual machines to the remaining host so - before the disconnection and removal of the host in vCenter - remove the license assigned to the host in the management of the vCenter licenses.

  André

• How to use & nbsp

  Hi friends,
  
  I have 5 items
  
  I used "Drag and Drop option" to organize the 5 elements and I have arranged the way below
  

  Name:
  Course Title:
  Course Date:
  Name Of Course Provider:
  Question 1:  Comments:

  I arranged according to the above terms and conditions, such as point 'question1' and 'comments' are in the same line.
  
  For all positions, I gave the following parameters:
  
  
  Horizontal / Vertical alignment: left
  Model: Optional
  
  But I don't want the label of the * "Question1" point * and * 'Comments' point * is displayed so I give the label for both items. Now how the appearance of my page looks like means,
  
  There is no problem with name, title, date of the course. Given that I did not label these three components.
  
  But the problem is with 'Question1' and 'Comments', since I took the label of these two elements.
  
  The appearance is of as
  

  Name: Mini
  Course title: APEX
  Course Date: 6/13/2011
                   How is this session?                                         good

  IN the above *' how is this session? is my "default value" question point and well, that's my comment on article "default value". *
  
  As I removed the label of those he is looking for the above manner. How to fix using nbsp. can you explain clearly
  
  It should look like
  

  Name: Mini
  Course title: APEX
  Course Date: 6/13/2011
  How is this session? good

  Thank you
  
  Kind regards
  Mini

  >
  The appearance is of as

  Name: Mini
  Course title: APEX
  Course Date: 6/13/2011
                   How is this session?                                         good
  

  He is an annoying feature of formatting of APEX. The only thing that can exist in the first cell of a shape line is a label of the order of the day (if an element has no label the cell will be empty). The layout of the form as an HTML table, the first cell in each row have the same width: that of the wider point label.

  To avoid the empty label using the same width as the previous labels, insert a stop and start of the HTML Table layout before the point of Question 1. (It can also stop the comments element moved to the right, it is unclear why this is happening in the validated information.)

  & nbsp; has nothing to do with it.

  IN the above "how session? is my point about 'default' value and hey, it's my comment section "default value".

  This seems a bit odd.

• THE ATTENTION! Verizon's Droid users training

  I received the following from Verizon yesterday e-mail: subject: free in-store Droid Training Classes April Maximize your potential Droid - find out more on the tips, tricks and free applications that will help keep you up-to-date on what your new device can offer. Our courses are suitable for beginners as well as advanced users. RSVP today for one of the locations below for your FREE store available for the customer 15 training first by test based on a first come, first served. RSVP is strongly recommended but not required. [enamel even an area to provide questions you would probably say... incredible course] I was wondering if anyone else has received an invitation as nowhere else around the country and participated in one of the events.  If so, do you have feedback on the quality and the value of the same?  I guess they would have people doing the training bike (I hope ;-)). Matt, my friend... do you know something about this? I intend to attend one in the area of Annapolis, MD.  I was offered two slots to 24 24 stores across Maryland, Virginia and DC. If that's all it's cracked up to the to be, it will be a first, as much as I know, a provider of Service to meet a customers to provide specialized training on one of its Smartphones (actually the Droid and Eris).  One way!  What could possibly bring this, what with the sale of more than just the Verizon DROID smartphones.  I guess that this kind of squelches the idea that VZ doesn't care for that customer, perhaps, or some emphsis is on the Droid because the company is moving to greater things and better qualities (phones), you think? In any case, I'm going to attend one of them, and if you want, I'll report on the forum with my thoughts. If this training was put at your disposal, that you spend Verizon on it? Thank you, Captain

  The captain, my Captain - I think you'll be completely overqualified for this training. Our friend Linda community went to one and I bet him a beer that she will lead the thing in five minutes. I won.

  I still think it would be interesting to go but I wouldn't not too far from my way. And maybe I'm wrong and they will give away free "Droid Donuts" or something. At best, learn you something - at worst, you get a great chance to show off.

• using hotspot as a provider of Internet services to delay questions express airport

  I have an Airport Express 2nd generation. I've set up as a home network with no ISP due the fact that I can't get an ISP where I live. I use it for connectivity to all my other apple and mac products, over some generic devices. I go through the implementation of change the settings to ignore the Internet LAN Ethernet, allowing me to have my network. So this is where it gets me confused after a few hours or a device is disconnected. So to continue. Then I take my Netgear wntce2001 streaming single channel device/path/device that I bought. now only available as a wntce2003 dealer local. I go into my menu of the hotspot browser, (Netgear 779 s aircard) and access my WPS in place. The Netgear wntce2001 at this stage only powered with one reset fees, like its new. Push button WPS on my Netgear select wntce2001 WP / parring on my browser and let them connect. At this point the Airport express will amber. Using AirPort Utility I get the double NAT message with options to switch to bridge mode. It all works very well. Now I can use all my Apple products to get on the line and play my generation 4 Apple tv, etc etc. Here's the problem when I remove my Hotspot or it turns off. I'm locked out/unable to join my ISP network wireless access point, that I created.  my book pro Mac will recognize is no longer the Hotspot may not use a web browser to access my hotspot and any other personal devices or belonging to my friends can see or access the HotSpot. Until I drive a half-mile away with her. Or perform a Factory reset fresh out of the box on my Airport express. Even if I remove the hotspot (short drive) then back it's always invisible until I get back from the Airport express. Once I reset the AirPort Express and reset all my other devices. I can rebuild the network and use it as I'm writing this Question (letter). Is anyone know why and how I can solve this problem. In short having a provider. Hotspot demographically impossible only internet access...  Thanks to an old man persisted.

  If I were in your situation... the first thing I would do, is check the wireless internet provider, which is an ISP btw... If they can sell you or recommend a router Ethernet instead of a hotspot. An access point has loads of limits and is not very well at all apple hardware.

  I confess that reading your description of how make you it work, it does not look good.

  I suspect that one of the main issues is the limited number of intellectual property which generally offer wireless ISPS... 5 is the common number.

  You are really not on the express of all... the devices are connect to the hotspot... and when something happens, you have exhausted all of the IP addresses.

  In any case we can begin to do some tests to prove it.

  Please post screenshots of the current configuration of the express with all this work to your satisfaction,

  I need the page summary of airport utility. That is to say it.

  

  Click on the button to edit, and then give me the Internet tab, tab wireless and Network tab screenshots.

• Question HP docking station: how to change search provider

  Hello

  I just got my first computer HP after being a Dell customer for 10 years. Its also my first Windows 7 PC.

  On the HP docking station, how can I change the search engine? I see that it is default to Bing. I can't see how to change to one of 2 choices; Support of Bing and HP. HW I add Google or any other provider?

  I've changed on IE on the top right of the browser, but I see no way to change/configure the search provider in the HP dock.

  Thank you

  Steve

  My apologies Steve! I get more watched the Office party...

  So I did not, what you are looking for your question?

• question about content provider URL

  I saw the post on http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Content-Provider-URL/td-p/487327

  I have a question, why peripheral must send my information (serviceid, version of the os, pinnumber, model, Field1) to the content url provider? and then another (serviceid, version of the os, model) information to bpasurl.

  What is the purpose of the 2 connects?

  You must be registered/subscribed with both systems.

  You must register with the content provider to let them know they can push to and also help to detect the device and swap SIM scenarios. Part of the agreement signed with the help of push is to implement these features.

  The subscription with the BPS is needed to prevent suppliers of content to any device, they would be able to easily spam all BlackBerry users if the push RIM infrastructure does not keep its own membership mappings. Keep in mind that subscription is a two-step process that is there for security reasons. This ensures that others cannot subscribe inadvertently you to push services that you are not interested in receiving.

• I am very new to the software online, please bear with me.  My question is this: I want to create my own designs I want to use for the manufacture of silk scarves.  I have to provide these designs of production of silk professional so they

  I am very new to the software online, please bear with me.  My question is this: I want to create my own designs I want to use for the manufacture of silk scarves.  I'll have to provide professional silk production houses these designs so that they can use my design patterns to create these scarves in silk for retail customers.  What application Adobe should I consider, and I can get a first experimental?  Thanks a lot for your help.  Looking forward to your response.  Best regards, Sunaura

  Hello

  You can try to use Illustrator or Indesign.

  Desktop publishing software | Free download Adobe InDesign CC trial

  Hope that helps!

  Kind regards

  Sheena

• Question on OID security provider

  1. I find two documents official config OID security provider, which is correct?
  
  http://download.Oracle.com/docs/CD/E15523_01/WebCenter.1111/e12405/wcadm_security.htm#BGBBHAGJ
  http://download.Oracle.com/docs/CD/E12839_01/apirefs.1111/e13952/TaskHelp/security/ConfigureOracleInternetDirectoryATNProvider.html
  
  The main differences are:
  
  a. whether to change cn uid to groups of related fields?
  for example: all groups filter to (&(uid=*) (|)) (objectClass = groupofUniqueNames)(objectClass=orcldynamicgroup))))
  
  b. to modify the config.xml file - jps?
  
  
  2. I config successful provider, based on http://download.oracle.com/docs/cd/E15523_01/webcenter.1111/e12405/wcadm_security.htm#BGBBHAGJ, I can find all users and groups OID with weblogic console. My question is why can not remove or change the user's group who, in the OID. When I add a new user via the wizard console weblogic I cant find provider OID in the authentication provider list. What matters with him? a bug or something wrong with my setup, same, it's build-in the drawing?

  a. whether to change cn uid to groups of related fields?

  If the name attribute of the group for the purpose of static group in the LDAP directory structure is one type other than cn, change this type in the settings for the attributes of all the groups and group name of the filter.

  OID, the static group attribute is CN if I'm not mistaken. So I think that we don't need to change the filter to all groups.

  b. to modify the config.xml file - jps?

  I think that no.

  Why can't remove or change the user's group who, in the OID. When I add a new user via the wizard console weblogic I cant find provider OID in the authentication provider list.

  We cannot change anything on the OID the OID of Weblogic provider is read-only. This is not the bug, you get the same behavior with other providers as well.

  Hope that answer to the.

• The add-in comes from Mozilla, not yahoo. So the answer that I got on my email provider is somewhat questionable...

  It covers all the right side of my screen. Can't do email very love. Tried it do fall down or simply disappear but not luck. ARGGGGGG

  1. The search of the browser window component is not a Mozilla provided the search provider, the URL is speedial.com.
  2. Looks like you have your Yahoo mail open in the sidebar, not the main part of the browser window.

  You open Yahoo mail via a bookmark?
  If so, click this bookmark, and then open the Properties. Then uncheck the option to open this bookmark in the sidebar.

  BTW, there is no "shareholders". Mozilla is owned by a non-profit foundation.
  https://www.Mozilla.org/en-us/Foundation/

• I've been making "immediate Attention required within 48 hours. provide your name, username, passwodrd, your date of birth, country, security question. It is said of the Windows live team. Is - is this legitimate?

  I get the message; The general account settings.  Windows Live team. Needed immediate attention. Noticed unusual activity in the account.  Fill in the information will result in lock out within 48 hours.  He asked my, name, username, password, date of birth, country, security question.  Is it Microsoft or a scam?

  Hotmail/Windows Live email scams

  Hotmail/Windows Live emails requesting usernames, passwords and your personal information are phishing scams.  E-mails threatening closure imminent your account unless you answer are also usually scams. Do not answer. Do not click on links in those emails.

  For more details on how to spot this scam emails and what to do about their please see:

  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail-email/how-to-recognize-if-the-email-i-have-received-is/d72a7d1d-b751-4F38-BD0C-cb238e02edd4

  and,

  http://answers.microsoft.com/en-us/windowslive/forum/hotmail-email/how-do-i-report-abuse-or-spam-in-hotmail/703b31d1-0381-4240-90ef-ff3c4ba66fad .

• Question: Provider EQS revisions Section sent or pending and custom

  Anyone know what the experience of the supplier is or should be when the EQS is sent with a set of custom Sections and they have not yet been returned... then the admin PLM4P modifies the Custom Section or replace?  I have two situations I am concerned with the experience of the provider and like any comment (currently about v6111 in PROD).  We have EQS which is sent to suppliers who are waiting to return.  We are looking at right now make changes:

  1. modify the attributes in a custom Section that is required and replace it with a new attribute using different types of environmental assessment.

  2 ' retirement' old custom Section and replace it with a new version for us would be to 'archive' article until we've moved data via some sort of logic is always searchable until moved.

  2. once the existing data in the old part is migrated to the new article, would make OLD inactive section.

  Each of these scenarios would negatively influence either experience of submission of provider - or - the thrust of the GSM EQ on the import function?

  Additional note: pending EQS have been sent to suppliers of designer of eQ with eQ models.  Most are material EQS.

  Thank you for any comments.  Best, Beckie

  Archived EAs and Sections will remain on the equalizer.   Since you can not remove the structure from the Admin, you should be ok to do whatever you want. EQS will act as a plug, when you archive / inactivate custom data, keep it on the object, if it is already added.   You cannot change a questionnaire, once he was sent to the supplier, so they will continue to see what you have added to the questionnaire.  If you disable a line or column, the provider may add and they have not yet added, they will see more this line or column in the select list.

  Hope this helps,

  Kelly