Replacement of material issue

Similar Questions

• MacBook Air 11 "(mi-2011) material issue"

  Hi, I had a MacBook Air "Core i5" 1.6 11 "(mid-2011) a few months ago by my sister. I'm new to Mac, but I've been fixing PC for more than 20 years. Need a little advice on the model of this issue.

  Full specs are here MacBook Air (11 inch, mid 2011) - technical specifications

  Short story is that the Macbook Air was dead. After buying the screwdriver specialized to open the macbook air, I managed to get out the internal SSD Flashdrive on but as Apple uses customized connectors I had to buy an external case to test the drive and he was DEAD.

  So I installed El Capitan on an EXTERNAL drive plugged into the USB. It's a plus for Apple to initialize external drives and a nice feature.

  Once I got the macbook air I found following several breakdowns of equipment.

  1 SSD drive is dead

  2 camera and the Microphone is dead. No facetime.

  3 the POWER BUTTON is dead and holding down the macbook air will not shut. (I had to unplug the connector from the motherboard) This allowed me to switch on/off the computer buy pulling on the magsafe power supply.

  I have been fixing computers based on Windows for decades and never seen so many parts fail both.    WHAT CAN CAUSE THIS?

  At first I thought it was the logic board at fault, but I doubt that is the case. I can only assume a power SURGE or something to do as much damage.

  I was hoping to get this up and running for my daughter from school to save money, but unfortunately not the case. The price of all the ssd drive is high and he still has a chance to not work if the logic board is also damaged.

  THEN AND MATERIAL SPECIALISTS MACBOOK GOT SOME ADVICE?

  It's true that to fix the power button that is dead the keyboard needs to be replaced?

  Advice would be useful. For now I am able to use with the base of the cover off and the battery disconnected but is now portable way.

  Thank you very much

  cinospotts

  Like you, I had business with the PC and computers relatively old. You have quite the list, and you probably answered your own question. I have studied logic board only and lives at $ 200-300 min. purchase from a reliable source of Apple pieces. In my opinion.

  Put the Mac Air 2011 all back together and its trade.

  Refurbished MacBook Air 2015 11 "Apple. $759,00 with Apple 90 days and 1 year Apple Care warranty. All new accessories. Apple shall be their refurb as new Mac for this new experience of the box. Here is a link:

  Hz-dual-core-Intel-Core-i5 http://www.Apple.com/Shop/Product/FJVM2LL/A/refurbished-116-inch-MacBook-Air-16g

  Nobody here can estimate what your Mac Air recovery value holds, but the Apple Store can discuss with you. I hope this helps!

  Bravo!

• Activation after the replacement of material!

  I want to replace my processor and motherboard. I bought my cyberpower computer, my friend remind me that I could not able to reactivate the system because the Win7 is related to the material. However, there are people saying that I don't no need to buy a new copy of win7. Could you please let me know the real answer? And what do I do?

  That's why OEM versions are cheaper! ($99)

  You could have spent more money when you purchased the computer and purchased a commercial version of the complete installation of Windows 7, then you could change the motherboard. ($199)

• Cannot access drive after the replacement of material

  I had some hardware problems with my computer recently.  I don't know who that resulted, but the card mother SATA controller and boot hard drive were damaged and had to be replaced.  I replaced the motherboard with the same exact model and the boot disk with a large (300 GB) version of the same model.  All data stored on a RAID1 different set (Mirrored) which does not seem to have been damaged.  The RAID1 set had permissions to full access from the account administrator «MainUser»  There was also an active guest account who did not have access to this drive.

  After replacing the drive start-up and the motherboard, I restalled Windows XP 32 bit operating system using the same CD of installation, login names and password that were used previously.  However, I can't access the data reader.

  I can see the drive in Windows Explorer.  I was able to change the drive letter to the old letter.  When I try to rename the drive I get the message Invalid Volume Label "You do not have sufficient rights to perform this operation."  When I try to explore the disc I get the message post work "R:\ is not accessible.  Access is denied. »

  Motherboard: Asus M2N - SLI Deluxe
  C:\ Boot disk: WD Raptor 300 GB
  R:\ Data drive: RAID1 (mirror) WD 750 GB

  How can I have access to the whole drive RAID1?

  You will have to take possession of it . Or download the file here .

• The T500 replacement hard drive issues

  Hi Lenovo community,

  My question is about replacing the stock 120 GB of HARD drive that was installed with my laptop factory T500 with a Western Digital Scorpio or portable HARD drive.

  • First of all, this is would be voids any warranty factory supplied with the laptop (it's this last year)?
  • Secondly, if I did a transfer of all of the files from my original HARD drive to the new would I have to manually partition the drive to have the backup and startup disks function normally?
  • Finally, the APS would still normally work?

  I appreciate the advice and provide solutions.

  Thanks advance!

  (1) guaranteed Yes is kept for all parts of your laptop other than the spare hard drive

  (2) burn a set of recovery media and then burn the rescue and recovery backup disks, after installing the new hard drive, then restore your hard drive using the support recovery and restore your Windows and software using rescue and recovery backup disks.

  (3) Yes, whatever the new SATA drive have distinctive head of parking.

• replacement of maintenance issue HD partition

  Hello! All!

  My friends computer hard drive went south and I replace the HD for him...

  What I need to know, is Dell made a partition of the disk maintenance

  If yes where can I get the installer so that it...

  LOL I know Compaq used to make partition of maintenance, is not sure about dell.

  It's a Dell Dimension 8110

  Thank you...

  
  

• How can one XP PRO/HOME ED be saved to work with older hardware for restoration after the replacements of material

  OLD Machine equals zero reactivation OEM support. How can I save four other machines to stop the death of my portfolio. Back up the hard drive just ISO or other wizardry doesnot work.

  It is not possible.

  You are usually "" the operating system for the same pc, backup data will not

  working with 'new hardware pc' or main pc components. In addition, a pc that is redesigned

  with 'a few new pieces' xp will require a re-registration for the OS...

• material issues and playlist

  Hello

  I have a gateway model residential 2Wire home portal 1000HG WEP security.

  With the help of the network card onboard Atheros AR5007 802. 11 b / g WiFi adapt.

  I realize dual N router would give better performance, but... the work of Home Audio System wirelessly with this router/ADSL modem?

  My existing audio equipment is stereo (amp, standard wired speakers and CD changer) in the dining room and wired computer game speakers with subwoofer separated which until now were connected to my laptop in room B.  Speaker connected to the stereo in the dining room cable is actually run underground to a set of outdoor KLH speakers located on my patio.

  I'm tired of my laptop being married to computer speakers (and sub)!

  In addition, I am interested in the Trio Kit. I spent a few hours on the Documentation, but still am not sure the capabilities of the controller (DMRW1000) and reader (DMP100).  My 2 questions are:

  Can I create playlists independenty Cisco Media Player software (which I run on my laptop) using the controller?  Or would I need to buy the Director to do?

  Looking at the screenshots for the Meda Player software, it appears the playlists can be created, but not named.  Is this correct?

  All Cisco entry (or other users) could provide would be very appreciated.

  Peace,

  Mary

  Yes it does, the controller displays an album cover.

• replace the material (for example the hard drive for an ssd and RAM more) in a fancy 4-1010ed

  I just bought a fancy 4-1010.

  Friendly and quick, but I want to upgrade.

  I just want to add an ssd and some more RAM for it, but I can't open back cover without destroying it (I think)

  How to open the cover back so I can access the internal organs of this nice feature?

  Envyfrans

  Hello

  Please follow the steps-by-step of the following document:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03404932/c03404932.PDF

  Kind regards.

• Material issue and now can't reinstall...

  Hello. I had a hardware problem and now trying to reinstall my CS6 drive student/teacher license, and the drives have an error and direct me to a download help link. Sort can someone link me to a download version of the products that I am authorized to use. Please?

  @

  Glen, please check the link for download Creative Suite 6 requests here.

  Let us know if you need more assistance.

• Can I replace the graphics card on Tecra M2?

  I have a Tecra M2 and the display shows verticle lines across the entire screen. These lines also appear when plugged upward on a normal screen.
  I checked Device Manager and it says that the nvidia card "cannot start." The problems had me uninstall and won't reinstall, no luck.
  Next option is to unplug and then plug back in, but is it possible? If it is separate would rather just replace the card. Thanks for any help.

  Chase

  From your description of the error, this really sounds like a malfunction of the GPU (graphics processing unit).
  Unfortunately, it is a serious offense and if a replacement of material you will not be able to fix this :(

  It is a case value because you can not only replace the graphics card. You need to replace the whole motherboard because the GPU is soldered on the Board and cannot be removed easily.

  There is nothing to my buddy.
  Seems that you need to contact a support technician.

  Good luck

• After replacing the CPU, I can't start my Satellite S1400-553 s

  Hello

  I opened my Toshiba laptop to replace the CPU a newer version, among other items recovered another satellite, when I replaced the and closed it up that I do not have to be initialized now.

  When I press on the power button the floppy drive makes a noise for a second slot and turns off again and the yellow power LED cable lights.

  I put back the original parts in the machine, but I still have the problem.

  Any idea of what s upward?

  Thank you
  Rob

  Hello Rob

  I agree with Johnny. You have probably damaged the mainboard. Replacement of the CPU part of the very sensitive laptop and most people make mistake and CPU burn out. You are a technician or is the replacement of material your hobby?

• Compatible replacement for HP g60-216em (NF270EA) hard drive

  So, I just replaced the keyboard and then the power supply. and now, it seems that the hard drive was missing.

  I'm not sure about the compatibility in HD that I am looking to buy replacement. Or the other of this service will be as a direct replacement without compatibility issues?

  http://www.Amazon.com/GP/product/B00168BSEW/ref=ox_sc_act_title_1?ie=UTF8 & PSC = 1 & SMID = ATVPDKIKX0DER

  http://www.Amazon.com/GP/product/B001R4BBL0/ref=ox_sc_act_title_2?ie=UTF8 & PSC = 1 & SMID = A3MDUFUQOQTCYS

  any help is greatly appreciated to ensure a compatible replacement. (given that the elements of return from amazon is a bit annoying, because I live in another country).

  Thank you!

  SATA has largely done away these older issues. Do not have any problem at all with a hard drives discussed above, or any other 2.5 inch width 9.5 mm thick computer hybrid laptop drive SATA or even more recent SATA solid state or by car. Go ahead and enjoy. If you need assistance with instructions (youtube has a video showing how to make to physically replace the drive) or software migration/relocation let us know.

• Save or not? Replacement graphics card

  Hello guys,.

  I was wondering if I had to back up my data on my imac when getting to the graphic card replaced because there are 5 green lines on the start screen. I found my exact problem else where on this community, but the thing is I'm unable to access the utility from time machine backup drive.

  Thank you

  Yes, you should always back up before replacements of material, or send your computer to the service.

  Utility of disc has nothing to do with Time Machine or backups, so I don't know what the problem is that you worry about. Please explain, or after a more detailed explanation.

• Replacement card wireless and power p7-1254

  1. what type and where can I find the exact same as found in the tech specs page in the link below?
  
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=5187022&... Also, where can I find this card on the motherboard? I don't see or I could have missed it.
  
  3. Moreover, if I were to upgrade the processor, which will be I need and how to replace the CPU?
  
  4. What is the recommended CPU to run at the same power original power supplied with my computer when I first bought it?
  
  5 How can. one last thing, I upgrade and replace the graphics card if this computer comes with the integrated graphics card of base/stock/default on this computer?
  
  I'm not very tech savy, or a computer programmer/Assistant. Help, please. Thank you!

  This is the original factory specifications for your desktop HP Pavilion p7-1254. Here are the specifications of the card mother AAHD2-HY (Holly) installed on your computer.

  (1) wireless card and its location;

   

  

  (2) CPU upgrades;

  Image AMD A8-3850 (Liano) 100W
  Image AMD A8-3800 (Liano) 65W
  Image AMD A6-3650 (Liano) 100W

  No need to replace the power supply to allow an upgrade of the CPU.

  (3) graph and power upgrade;

  This computer using integrated graphics supported by the motherboard and APU. Installation of a discrete graphics card will automatically disable the integrated graphics card. This model supports a v2.0, v2.1 or card discrete graphics PCIe x 16 v3.0 Specification v2.0. For all but the most basic graphics cards, you will need to supply. I suggest using the power supply Corsair CX500, CX600, CX500M, and CX600M.

  Please see HP - addition / replacement of material and select the appropriate necessary topic for instructions.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation