iPad power Switcj

On my iPad, the power as well as the blow of unlocking button do not work. How can I solve this problem?

Take it to Apple for a free estimate, or call them and arrange for express service. It cannot resolve hardware problems yourself. You will need to get a replacement from Apple. Apple does not repair the individual components like that, they replace the whole device with a service unit. If you are in warranty and parts failures were due to a manufacturing defect, it would be free. If out of warranty or if the failures were due to accidental damage or misuse, the elimination of guarantee fees apply.

iPad repair - official Apple Support

Tags: iPad

Similar Questions

  • I bought an iPad mini4 specifically for use with a pro Phanton3 drone. It will NOT connect the remote control with the drone. They say it's a problem of software iPad mini 4 9.3.3. How can I remove and reload it.

    How can I uninstall 9.3.3 an mini iPad iOS 4 and reinstall? I bought it specifically for a ghost Pro 3 drone, and it does not work with the drone. Someone had luck with uninstalling/reinstalling. At this point, I lost a LOT of money.

    Apple frowns on a decline in the ratings.

    While Apple allows, try downgrading to 9.3.2.

    For a limited time Apple will return you to the previous version.  Do not hurry.  This period takes up to a week.

    See brownox second post here:
    https://discussions.Apple.com/thread/6545455
    and
    http://www.GottaBeMobile.com/2014/09/17/downgrade-iOS-8-to-iOS-7/

    see which versions are allowed:
    http://API.ineal.me/TSS/status

    --------------------------------------------------------------

    See the arizonacat post and others on this topic.

    https://discussions.Apple.com/thread/5337442?TSTART=0

    arizonacat notes these sites:

    --------------------------------------------------------------

    See the second procedure in reloading the software from scratch.

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • How to activate my ipad ios 90.3 pre-installation please help me

    I need help to activate my ipad before you install ios 9.3 I have try all the way, but it didn t work

    I need help to activate

    It depends on what state you are in. Do you need to backup you ipad?

    My ipad before you install ios 9.3 I have try all the way, but it didn t work

    What do you have.  Step by step.

    ------------------------------

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • iPad does not connect to the server

    Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

    Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

    This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

    I was wondering what is happening and if there is an inexpensive way to get it running again?

    Sparkgapper

    p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

    If you have problems with the applications of stalling or crashing,

    double click on the "home" button

    -slide up on applications to force leave their

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • How can I restore the function of carrier on my iPad 2?

    Since the last update, I've lost the function of carrier on my ipad2, I completed several resets hard.  A new SiM card makes a temporal difference, but the function of carrier went, once again.  I read that Apple messed up many iPhones but it seems

    I know that the only one with a problem of the iPad.

    AAnyone to resolve this, please?

    I have this same problem on iPad 2 since the 9.3 update.  I have not found a solution, but I found a way to get the cellular network.  But if you turn off and then turn on the you will find that he is gone again and you must repeat the following work around.

    1. turn off the power and remove the SIM card.  Then be able to turn it back on and it will ask for SIM card.  Insert sim card and it should find the network.  It's simple, but if you have a case that is a nuisance to maintain sideways.

    second workaround solution.

    1 go to settings and disable (mobile) data cell.

    2 turn airplane mode ON.

    3 turn off iPad.

    4 wait about a minute. (Not sure if absolutely necessary)

    5 iPad power on.

    DISABLE airplane mode turn 6

    7 activate cellular data.

    You should then see a cellular provider box pop up under the cell data area and must seek and find your network.

    It works on the iPad 2 and I hope that other iPads.

    I noticed heavy battery drain less than 9.3 and when I ran my iPad in the condition of no Service, use of the battery is improved considerably.

    Good luck.

  • Problem of cellular network data on iPad 2 Air

    I reside in the Nepal. And I bought my iPad Air 2 February last year of the India (so 1 year warranty has expired). I bought wifi + cell in the hopes that I will use data from the cellular network that I usually have to travel a lot, and getting OPEN wifi or hotspot to PAY in our country is always a doubtable idea.

    MY problem is

    Most of the time, NO SERVICE instead of the network's logo.

    No. 3 sign whenever the network is available.

    CELLULAR DATA NETWORK all of a sudden disappear even if that's availabale, and whenever I try to use it.

    Battery drain strongly when CDN disappear and iPad try to look for the CDN using the text "searching...". ».

    I do not know if my problem started exactly, but it happened while I was iOS 8 is installed on my iPad. Then, I panicked and searched Internet solution and tried everything mentioned on the Internet. Yet, I have no solution. Then I saw an article saying that his problem to Apple and they will fix it on the next iOS update. I was relieved about my problem with this idea. Thereafter, whenever new iOS came (namely 9.1, 9.2 and I m running 9.3 today onward), I installed them in the hope that they could have resolved the issue. But, I am always disappointed because they don't solve the problem. So, is it authentic Apple coustomer care anyone online can guide me what to do?

    probably, I'll have to go to India if you won't help me. But, going to India only to solve this problem alone is not something appropriate for me. In addition, I'll have to find Apple Store too which may be available in only a few cities in India.

    future prospects for answers.

    BTW, if Apple answer soon about these issues (I'm not alone!), then slowly we can hesitate to buy apple products in the future.

    With respect,

    Prashant bejaoui

    (User of Apple since 2008)

    I have this same problem on iPad 2 since the 9.3 update.  I have not found a solution, but I found a way to get the cellular network.  But if you turn off and then turn on the you will find that he is gone again and you must repeat the following work around.

    1. turn off the power and remove the SIM card.  Then be able to turn it back on and it will ask for SIM card.  Insert sim card and it should find the network.  It's simple, but if you have a case that is a nuisance to maintain sideways.

    second workaround solution.

    1 go to settings and disable (mobile) data cell.

    2 turn airplane mode ON.

    3 turn off iPad.

    4 wait about a minute. (Not sure if absolutely necessary)

    5 iPad power on.

    DISABLE airplane mode turn 6

    7 activate cellular data.

    You should then see a cellular provider box pop up under the cell data area and must seek and find your network.

    It works on the iPad 2 and I hope that other iPads.

    I noticed heavy battery drain less than 9.3 and when I ran my iPad in the condition of no Service, use of the battery is improved considerably.

    Good luck.

  • Change of date - ruins iPad

    Hello community!

    Have you heard of this issue?

    In your date & time wind parameters return the date before 2001 about things will start (or stop) that goes with your iPad.

    This causes the iPad (if you're lucky) slow running. About 1-2 images per second.

    However, if you are unlucky your iPad stop and don't respond to anything.

    Someone at - he seen elsewhere deliver and have some tips or solutions on how to fix it?

    I have two iPads that got their date and time changed to the about of 2001. (Don't), they are extremely slow.

    What should I do?

    What can I use for the tools:

    MacBook pro with iTunes and Configurator

    PC with iTunes

    Best regards

    Jonatan *.

    < personal information under the direction of the host >

    I heard that if you choose the date to a date in 1970, the ios device will freeze. Not heard about this problem.

    Can try:

    If you have problems with the applications of stalling or crashing,

    double click on the "home" button

    -slide up on applications to force leave their

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    Perform a full backup of your device.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    "You can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    "You can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

  • Will not restore IPAD 2

    Hello world

    I would appreciate your help.

    Day and night my ipad 2 won't turn on. Whenever I connect to my MAC to restore the screen of the ipad actually turns on with the logo of apple and bar below you see when its loading or installng the software, but it gets stuck there and theres no improvememnt on the progress bar. I tried numurous times and nothing. I also tried all the combinations to hold the sleep/home button and nothing.

    Can someone suggest options that might work?

    Thank you very much!

    Hello

    Turn off ipad

    Connect the USB to your PC wire

    Do not let go press & hold power down on iPad button.

    Connect to iPad power key

    Until the PC sees ipad and then wait for the restoration.

    You may need to do more than once.

    See you soon

    Brian

  • iTunes Store stuck download

    I recently bought an iPad mini 4.  In the iTunes Store began downloading the songs and then stopped these songs (an album) are no longer available in the store.  I can't remove the stuck downloads.  IPad power off (by pressing home and the button simultaneously) does not work.  Any ideas?

    Hi eileenfromlansing,

    Thank you for joining the communities Support from Apple! After reading your post, I see that you have some songs that got stuck download inside of the app Store in iTunes for your iPad. I know it's nice to keep this clear list downloads, so I'm happy to offer assistance.

    Take a look at this article to see what to do if a purchase iTunes Store stops unexpectedly download:

    When an iTunes Store purchase ceases unexpectedly download - Apple Support

    The steps described in the article are more orientated the resumption of downloads, rather than delete them, so if you get no took them and completely downloaded on the iPad, you can certainly remove it from the application of music once they are made download. Otherwise, if they are still stuck, you can try to slide your finger to the left on each of them and the 'DELETE' option should appear.

    If you find that the steps outlined in the article do not solve your problem, I recommend that you sign out of your Apple ID in settings > iTunes, App Store, restart your device, then reconnect to check the iTunes Store app to see if they are still there.

    Have a great day!

  • Activation prblem

    I have a serial number of the IPad F6QQT07KFK15. I had a bad load anything on my IPad so I restarted and now it says IPad could not be activated because the activation server is not reachable. Try to connect to I tunes to activate, but how can I connect to I tunes if I can't turn on my IPad?

    Hello

    Make sure your PC is running the latest version of itunes 12.4

    Turn off ipad

    Cuonnect drive to your USB on your PC

    Press and hold the power button on iPad don, t let go

    Insert into iPad power button pressed until the PC sees ipad.

    Wait for the restore.

    You may need to do more than once before it works.

    See you soon

    Brian

  • Everything takes so long to load always worked so far great

    I have an ipad. It worked very well in the past.  All of a sudden it takes so long to load

    All of a sudden it takes so long to load

    What you're trying to load?

    What have you changed recently?

    What are you doing time you turn on until the problems?

    ---------------------

    If you have problems with the applications of stalling or crashing,

    double click on the "home" button

    -slide up on applications to force leave their

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • Why some of my apps not opening not? is it something to do with storage

    If I try to open a mail it flashes quickly as do other apps?

    It would be helpful to know what version of the ios you have.

    ----------------------

    sledge hammer approach.

    If you have problems with the applications of stalling or crashing,

    double click on the "home" button

    -slide up on applications to force leave their

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    Perform a full backup of your device.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    "You can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    "You can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

  • Smar Wifi Linksys Web site

    Take forever connection that it says "pending".

    Try to clear any cache of the browser. Completely exit the browser or iPad power off then turn it back on.

    Install another browser on the ipad and the test...

  • After resetting the iPad to default it show that the power cord is trying to connect to iTunes

    I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

    The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

    If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

  • New 12 watts of power adapter compatible with iPad air 2?

    Is the new adapter of 12 watts of power which is delivered as an accessoriy with iPad compatible with iPad Pro 2 air or it will overheat the battery?

    Thank you

    It is very good.  I use my indiscrimantly brick power 12w with my iPad 2 Air and big-screen iPad Pro.  Output one is always in standard USB 5v and the iPad itself will regulate the current in the charging system.  http://www.Apple.com/power-adapters/ the only difference is 2. 1 out of note on the 2 and 10w. 4 a rating on the 12w, but the device regulates what current is used for billing.

Maybe you are looking for

  • setting resets to "restoration of Session."

    HelloFirefox tries to close (and forget) all tabs (and they are in groups) after my session.I use the option ' restore the tabs, windows and the previous session ', but it seems to be reset to "Display the homepage" somehow.Fortunately, FF warns me i

  • Point floating invalid Qosmio F50: not of WebCam - operation & issue FN

    1. After installing various software on my F50, the webcam no longer works and I get an error "floating point invalid Operation."However, the internal cam works when I use the move controller. 2. after the installation of new Zone Alarm Security Suit

  • Set up how to fax on new HP envy 5530

    I need measures to implement my new HP Envy 5530 for fax services. Please answer as soon as POSSIBLE.

  • How to fix the missing cd/dvd driver?

    I can't watch, burn to my cd player. need help

  • Runtime C++ with windows Explorer error

    Hi, I have a problem with Windows Vista service pack 2 - worm 6.0.6002, build 6002,When I am logged on as administrator administrator do not seem to work.Whenever I do a right click on most of the elements, I get the following message: "Microsoft Vis