iPad Pro think Smart Keyboard is still connected, even when it is not

Similar Questions

• iPad Pro - sluggish physical keyboard after update 9.2

  I use an iPad Pro, 128 GB wi - fi only with a case of keyboard Logitech Create.

  Prior to 9.2, the keyboard was perfectly admissible when you type. Following the update, now the keyboard is slow; It feels as if the software is struggling to keep in touch with my shots. While I type, almost all the other words it lacks several letters and remains misspelled or gets automatically corrected to something that I didn't intend.

  Makes me think it is a problem of software (apart from the fact that the problem popped immediately after a software update), is that it only happens in certain applications. Typing is slow in the Notes of iOS app, and it is slow when you fill in the fields like this in Safari. However, when I type the address bar Safari or in the 3rd party app editorial, it works fine.

  anyone else encounter this? Are there patches side waiting for a software update? If you encounter this problem, please note what keyboard you use with the iPad.

  First thing I would try would be:

  Force the restart (does not affect the settings/data/music/apps/etc)

  1. press and hold the sleep/wake button

  2. press and hold the Home button

  3. hold both buttons until the screen turns off, then back on with the Apple logo.

  So forget the Bluetooth connection between the iPad Pro and the keyboard, the re - combine the two.

• iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  I assume that you mean the keyboard built into the 'smart cover' - it must be in contact with the iPad.

  A wireless keyboard Apple has been reported as working with an iPad Pro. Plug Apple for the new State of "magic keyboard" that it requires a Mac with os x 10.11 or later - he does not mention the iPads. Third-party Bluetooth keyboard should work.

• With the help of iPad pro do. I need to connect it to my computer

  I have a new iPad pro 128 FB. I have set up in the new iPad. When I use it I have to connect to my computer because I didn't transfer anything that is on the computer for my new pad

  No, you don't have to connect it to your computer at all unless you need to restore the iOS software. Why you tell us exactly what you want and we can give more specific help.

  For example... Is there specific content in your computer that you want to transfer? You want to back up or restore a backup of iTunes? You prefer not to use iTunes at all?

• My Apple Smart Keyboard (Azerty) switches to Qwerty when I select the UK English keyboard

  I bought an iPad Pro 9'7 and until yesterday, I have not used the Smart Apple, that the native Apple keyboard keyboard in IOS. I'm leaving in a country speaking French, so I'm used to the QWERTY keyboard, and the Smart QWERTY keyboard did not yet, until recently. I just bought my Smart Keyboard QWERTY, which is now available. I run immediately in the keyboard configuration problems.

  With the native IOS software keyboard, I installed 3 keyboards: French, Dutch and English British and I've set up Dutch and British English for QWERTY. It has worked well. I was able to take advantage of the spell checking in all languages, while keeping the AZERTY keyboard layout. I am constantly moving between these languages, while it was important for me to be able to switch between languages, while keeping the Azerty layout

  On my new Smart Azerty keyboard, I can easily switch between languages using the button 'globe' on the left side of the keyboard, but as soon as I switch to British English or Dutch, the keyboard will automatically switch to the Qwerty. I checked my settings of the iPad has not changed: Dutch and English British are always set to Azerty. If I'm getting confused now.

  Of course, I could stick the french language as a framework for my keyboard, the smart keyboard would retain its built in QWERTY layout, but I would miss the spell check option.

  Any suspicion, the solution or work around it?

  Simply set French as the physical keyboard for English and Dutch in settings > general > keyboard > hardware keyboards.

• Anchor points will not connect even when "intersection".

  Hey guys

  So my question is, for example, I have 2 lines with an anchor at each end. When I drag on the anchor line anchor the other end line in order to connect them I see green lines, saying that they cross so I line and release the mouse button. The line that I drag then moves to the side, and they're more connected. When I see in the outline I see that the lines are not connected. I try dropping them on in map mode, same problem. It is the same for all the anchor points, including on forms except those drawn with the pen tool.

  I've been job id document and it was working fine until just recently, then it stopped working and I had the problem that I pointed out above. When I open a new document, it works fine. When I copy my designs in a new document, all lines that came from the old document still have this problem but all the new lines or shapes I create join perfectly. I want to continue to work on this document that I have spent a lot of time on it to this day though I need points to align and connect when I join them.

  Any ideas?

  Thanks in advance

  chapachap,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

  In addition, if you want to join them in a path, you must select them and Ctrl / Cmd + J (with an apology for possibly stating the obvious (too) you already know).

• Time is presented an hour too late on my MAcBook Pro since I installed El Capitan. Even when I fix by hand, it changes automatically, weather, I disable tim Auto adjust. How to fix this bug?

  Time is presented an hour too late on my Mac Book Pro. Even when I correct, it changes back 1 hour too late, wether I have disable automatic time adjustment. For example in France is actually 19 h 11 bu is present on the top of my screen that 20 h 11.

  How to fix this bug?

  Arie

  System Preferences > Date & time > time zone...

  Make sure that your time zone is set correctly.

  If, after the back... There is one wackiest thing that can cause this.

• Why cfstat still poster reqs qued even when it is not all traffic to the site?

  I try to use cfstat to help understand some performance issues with our production server. Its CF 10 Ent on a Windows 2008 VM. I'm also 10 ColdFusion installed on a local Windows VM.

  I run cfstat with a 1 Refresh second on the local production and the VM server. The local VM Reqs Q column ' ed shows a constant 10 even if I'm not hitting all sites on the server. The production server shows a constant 20-Reqs Q'ed and some Run Reqs'g.

  Is this normal? I have to make some adjustments to the CF or the JVM?

  Thank you

  Hi Phil,

  CF10 CFSTAT seems not to be as convenient as CF9 or earlier version.

  Requests queued seems to be displaying the value of tomcat for minSpareThreads connector. Tomcat minSpareThreads is the minimum number of threads still kept running. If not specified, the default value of 10 is used.

  HTH, Carl.

• OfficeJet Pro 8500 a Premium: loss of connectivity wireless when I plug the cable on Officejet Pro 8500 a

  Successfully, I can connect an ethernet cable to the ethernet on the back of my printer port and print to the printer via the cable network.  I can unplug the ethernet cable and configure the printer features wireless to the printer and print successfully on the network wireless to the printer.  However, when I try to use wired and wireless at the same time (both running), it won't work.  If I try to turn on wireless with an ethernet cable connected to the printer, I get a warning message on the home screen, indicating that wireless printer can not be configured or turned on when an ethernet cable is plugged.

  Is this a limitation of the hardware printer or I have the printer configured incorrectly?

  I tried to reset the printer default network settings and reconfiguration of network but still have the same problem as described above.  On a HP Officejet 8600 A separate premium, however, I remember that the two cables and wireless can work at the same time.

  Thank you very much for your help!

  Hello

  This is a limitation of the printer, either a cable or a wireless network connection may work, you cannot use two connection options at the same time.

  Kind regards

  Shlomi

• IPad Pro (2 days) comes crashing (white shown in coloring app) - can not restart, cannot stop. ??? Help?

  I used my pen and a coloring ap when the screen suddenly became all the bejigity (horizontal lines) - then suddenly a white screen.  Now, I can't turn off - restart.  at the moment I'm waiting (not very patiently) for the battery to run down... what should I do?

  What happens when you try to restart?

• Surface Pro screen goes into sleep mode when it is connected even when put to execution and never Power Options sleep or screen dark

  It seems that the parameter is ignored.

  There is another hidden setting?

  Check your screen saver if it is always the case.  Happened to me and I have triple checked all my settings and my screen has been set to never when it is plugged in also.  Then I realized, there was an update and for some strange reason, some updates change your custom parameters and shows how to activate the screen saver and mine was set to 'white', which is what was causing my screen seem to be turned off... It was the screen empty screensaver, turn off the screen saver and... Alto... fixed!

• Keep Satellite C55-B901 connected even when the battery is 100%

  Hello

  I just bought a Toshiba Satellite c55-b901, and I was wondering if it's good to keep the laptop plugged even after the battery is fully charged or not. Which would affect the battery life or it does not matter.

  I also have a cooling block that keeps the freshness of the laptop.
  Would you recommend that I keep it plugged in, keep using it when it is 100% and 10% only when charging and will stop when 100%, or use two meanings I like?

  Thanks in advance!

  You don't have to worry about battery. You can use your laptop connected to the power adapter. What you can do is to use the battery mode from time to time. Do battery empty and reconnect the AC adapter.
  You can do this in a week time.

• How can I reconfigure connection type when I can not connect to window?

  After a repair of xp pro, admin.logon required. no password as this is not a pc.now network that all users need that we don't have or know password

  Check these:

  After XP repair request password
  http://www.computing.NET/answers/Windows-XP/after-repair-XP-asks-for-password/101093.html

  repair XP, now requires admin password?
  http://www.softwaretipsandtricks.com/forum/software-problems-useful-utilities/20144-XP-repair-now-requires-admin-password.html

• Lost my internet connection, even when wired

  My laptop was working fine then one day just stopped connecting to the internet.  I have a computer dell laptop (Inspiron 1525) with vista.  I ran each test there is.  He says that I have "local".  I try cable and wireless tried to obtain a new ip address and just could not get my maptop online.  It has been more than two months without it and I go to school online.  I have 3 trays of Home Office and two of them are wireless and they work very well.  We tried my friend's laptop and told him the same thing: Wireless Network Connection Status, IPv4 & IPv6 connectivity is local.  I have a linksys router and use cox for my home internet provider.  All my other computers work and their wireless cards.  My laptop is new and I don't know anything.  Please help me get online?  any suggestions?  Dell wants $59.00 for help and I've been unemployed for months.

  Hello

  Are your other computers, Vista? Router is configured for WPA/WPA2 security? It broadcasts the
  SSID (name)?

  Try these:

  Eliminate corruption in case he has a role:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------

  Control Panel - Device Manager - network - Wifi - write down of the brand and the model - double click on write - tab - pilot
  version - click the driver update (this likely will do nothing that MS is far behind the pilots of certification).

  Do the same for the network (NIC) card

  Then right-click on each one and UNINSTALL - this will rebuild the driver stack - RESTART
  -----------------------------------------------------------
  Later, when I hope that you are online.
  l
  (If you get online, then you want to use this information to get the new drivers Wifi and NETWORK card and you can do it.)

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  Then - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------------------------------

  Do this if up and running or not. Make sure you know the user name and password to the network.

  This will initiate you if you have any access - that and restart after the two.

  Control Panel - Network & Sharing Center - right click on Customize - set location Page - merge or delete
  networks - REMOVE ALL networks except those you are 100% sure aren't your network - so there is no doubt
  Delete it and really best to erase EVERYTHING. (if you delete one that you can relogon on when you access next time).

  Network & Sharing Center - on the left handle wireless networks - if all there right click Delete network
  Network & Sharing Center - on the left handle network connections - it should show nothing connected.

  Reboot - use start-up connect - connect to the network - when asked if you set it in private.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Firfox still play mp3 when told of not

  I implemented the solution specified in this announcement:

   https://support.mozilla.org/en-US/questions/963437#answer-514541
  

  However, the question now is when I click on a link to an MP3 from an external program, IE. Outlook, Firefox opens a new tab in this affair and starts playback of the file.

  The solution in /questions/963437 #answer - 514541 (setting the preference media.windows - media - foundation.enabled to false in: config) only applies to Windows Vista and more. The preference of Windows XP is media.directshow.enabled.

  It is copied from http://kb.mozillazine.org/File_types_and_download_actions#Built-in_support_for_certain_media

  Windows Media Foundation isn't available on Windows XP.  Starting in Firefox 26,  MP3 content on Windows XP will open in the browser with the built-in player using DirectShow.  The related preference is media.directshow.enabled (bug 861693).