iPad Retina icon removed when I publish

Similar Questions

• HP ePrint mobile app on iPhone 4 & iPad retina - both devices say «Photos (0)»

  I just installed HP ePrint mobile app on my iPhone 4S and my iPad retina. However, when I go in the application, when the main screen is displayed ('Photos'-'cloud'-'Web'-'Email'), when I type 'Photos', on every device it says: 'Photos (0)' - that is, I guess the app think I have 'zero photos' on both devices, which is obviously not true. Other details: (1) I have a Photosmart 7510 on my home wireless network; (2) I am able to print OK for the 7510 using Apple "AirPrint" - no problem; (3) I can also print using a device (iPhone or iPad) using the HP app 'PrinterControl '. So, how HP ePrint mobile app can not 'see' my photos on my iPhone or iPad (especially now that they can 'see' these pictures when you use the HP app "PrinterControl"). Thank you in advance to anyone who can shed some light on this situation.

  The problem is related to the privacy settings on ios 6. To solve this, go to settings on your device and you should see a section of privacy. From there go to photos and turn on the eprint application. It should work to allow you to see the pictures.

• EliteBook 2540p: do not receive the "Safe to remove hardware" message when I click the icon 'remove hardware safely '.

  After backup hard drive in a 1 to USB. I click the icon 'remove hardware safely '.  Never, I get the message "Safe to remove hardware".  You just end up taking it out, I know that's not good.

  Cyber_Master_G wrote:

  After backup hard drive in a 1 to USB. I click the icon 'remove hardware safely '.  Never, I get the message "Safe to remove hardware".  You just end up taking it out, I know that's not good.

  Hello

  You also click "eject...". » ? In this case, my SD card:

  

  Kind regards.

• iPad pro icon load acting strangely.

  Since iOS 10.0.2 was installed when I charge my iPad Pro 9.7 "icon at the top right seems to act differently.

  Before the iOS update when I plugged the cable into the icon would change from the percentage text and a white bar for the battery to a green bar and the prosecution would progress (sometimes the text would update) and move the green bar. When 100% has been reached the green bar would be change in white and below it would say not charging.

  It seems now the green bar works fine, up to 95%. So if the iPad goes into 'sleep', when I wake up it it says NO charging current, but there the text usually is greater than 95%? If I pull the rope and reinsert, the bar turns green, but at some point he indicates NO CURRENT charging or the screen goes black and when awakened it indicates NO CURRENT charging.

  However, once it reaches 100% now STAYS green bar? He turns not white nor the State DO to RECHARGE not?

  I do NOT use a standard charger, but an Insignia desktop charger. This has worked for me for years without problem? Even on this iPad Pro (and an iPAD 2 and 3 in the past).

  Ideas? Code modified to load differently to avoid overheating of the battery? My charger is a failure? Do not recharge the iPad is slower than before?

  Confused...

  Hello. They changed the logic that monitors the loading. As you say, everything works as before. If you use the original charger, that it should behave normally, because it will receive a higher current (faster loading).

• Problem with the icon 'Remove hardware safely' on the bottom of the screen

  How can I get the icon 'Remove hardware safely' to stop making its sound? It makes the bonk sound which indicates that you can remove your device. It slows down the PC games and is just annoying. I used the troubleshooter and checked all USB options that have been listed under my 'pilot' and the message I get says that they are enabled and work correctly. When he makes his tone, the icon in the taskbar disappears and reappears then. It does not seem to be no harm in or affecting any other thing except the PC games we play on our computer. Any help is greatly appreciated.

  Hi Chrisjurrians,

  To turn off the sound for the connection / disconnection of devices, follow these steps:

  a. click Start and select Control Panel

  b. click on device sound and Audio

  c. under device sound and Audio, click its tab

  d. under program events, select the device connection and in the Strait, make scrolling the drop down for None.

  e. also repeat the same for disconnection device

  This should do the trick.

  Let us know if that helps.

• I lost the icon 'remove hardware safely '.

  Hi all

  I lost the icon 'Remove hardware safely' in the notification bar, I can see on the left side of sreen in respect of the points made, can someone tell me how to get it back?

  I use os XP with SP 3 with 1.3 proccesser. I think that the problem arose when I plugged the USB 2.0 back., and everything has been cut. Thanks for any help.

  silverlearner

  See if this solution sooner solves your problem:

  "My icon"Remove hardware"disappeared. Where can I get that back? »
    <>http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/my-safely-remove-device-icon-has-disappeared-where/744a8e57-a3e1-4006-a7db-223ebd96b623>

  HTH,
  JW

• The music changes when I 'publish '.

  I made a movie & trimmed a clip of music because I don't want the music to start until the chorus, t begins in the perfect location and I've recorded.
  But when I published the film music is different and he's starting to halfway through the first verse. Any help?

  I don't understand how a part of a piece of music video after
  It has been removed from the project.

  Perhaps something in the following links useful:

  Windows Live Movie Maker add & adjust Audio tracks
  http://www.YouTube.com/watch?v=_I24F5GTMhQ

  Add music - Windows Live Movie Maker
  http://www.YouTube.com/watch?v=CzZE0nGBnqw

  Windows Live Movie Maker Tips - how to use multiple background music
  http://www.maxiorel.com/Windows-Live-Movie-Maker-Tips-how-use-multiple-background-music

  Windows Live Movie Maker edit video
  http://explore.live.com/Windows-Live-Essentials-Movie-Maker-get-started

  How to split video files in Windows Live Movie Maker (Save)
  http://www.recipester.org/recipe:Split_Video_Files_in_Windows_Live_Movie_Maker_34299638

  Sharing video and Audio - Windows Live Movie Maker
  http://www.YouTube.com/watch?v=jvsRKz2peOg

  How to save the project in Windows Live Movie Maker
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

• New appearance of the icon 'Remove hardware safely' in my taskbar

  Hello.. I'm using windows vista on a computer acer laptop. Today I have been updated from my iphone and press the eject button as itunes tells us to do. Then I tried to update my inano and he would not recognize it when I plugged into the USB port. When I checked it appeared that my iphone is still connected. I stopped him, left and a few hours after I got home, I got a blue screen on my laptop with orders written about it. So I ctrl-alt-del and started in normal mode and it started. Now I have an icon 'remove hardware safely' in my taskbar and have no idea why its there. Can someone help me? THX

  Hello

  The icon is normally so it was probably worth hide if inactive and because of
  the incident you said he was not idle. It should sooner or later hides.

  To check its setting - right click on taskbar - properties - Notification area - customize.

  I hope this helps.

• Icon 'Remove hardware safely' is missing from the notification area

  I just reinstalled Win7 X 64 business but found that the icon 'Remove hardware safely' is missing from the notification area when I plug a USB key or external HARD drive (they don't work either by the way, I can view files in them no problem), I tried the solution of workaround suggested in http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/safely-remove-hardware-icon-missing-and-cant-eject/e9fda0a2-c308-4853-bf1d-a3926ff0fcd1?page=1&tm=1299855382970#footer , but it does not resolve the issue, I don't see the USB stick or external HARD disk in the dialog 'remove hardware safely '. The only way I can eject a USB device is click on the drive in windows Explorer and select "eject" while even "eject" is not available for an external HARD drive

  Does anyone know how to troubleshoot it?

  Hello

  See if they help you:

  References to Vista also apply to Windows 7.

  Start - type in the search-> CMD bar find top - make a right click on - RUN AS ADMIN

  (You can copy and paste the line below to the command prompt - it is case sensitive)

  Rundll32.exe shell32.dll, Control_RunDLL hotplug.dll

  Press enter

  Remove the icon of USB device missing from the taskbar
  http://www.techf5.com/archives/safely-remove-USB-Hardware-icon-missing-from-taskbar/

  Restore missing or disappeared safely remove hardware icon
  http://www.Raymond.CC/blog/archives/2007/12/30/restore-missing-or-disappeared-safely-remove-hardware-icon/

  Remove device icon lost
  http://en.kioskea.NET/FAQ/Sujet-2501-safely-remove-hardware-icon-lost

  --------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ======================================

  If necessary check the latter:

  How can I remove hardware safely in Windows 7? (via the shortcut)
  http://windows7themes.NET/how-do-i-safely-remove-hardware-in-Windows-7-via-shortcut.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• Hyperlinks does not when you publish the Web site.

  I have some social icons in my header and footer, all connected correctly.

  Hyperlinks appear in Muse, they appear and operate in the preview of Muse, they still function perfectly when I preview the page in the browser but when I publish the website, they no longer work. Works flipping but the cursor does not change to the small white hand and when clicking on nothing happens...

  Could someone help me please?

  ED!

  Try to load your site on a third party hosting. In Business Catalyst is often and unpredictable it has bugs

• What happens when you publish the SFW and HTML5?

  I publish courses that will be used for computers and mobile devices (iOS and Android tablets). Most learners will have access to them by computer. In the HTML edition, compatibility with browsers and performance are a challenge. I would prefer reading of computers in default of mobie HTML 5 and Flash devices.

  What happens exactly when I publish using both formats? The support of the browser will be detect and launch and give more consistent training?

  I'm also curious of the best practices used by third parties.

  Any help is very appreciated,

  Jon

  Yes, that is exactly what is happening. First, it detects mobile devices, then the swf as a help file. Some people have had to add other user agents because that's what checks the Captivate:

  ["blackberry", "android", "iphone", "ipad", "symbian", "smartphone", "ios", "windows this webos","" "];

• text of pixelation on ipad retina

  Hello

  I have an iPad 2 and an iPad with Retina display to test my folios. I have created a folio in horizontal format with settings 1024 x 768 pixels as it is the only horizontal iPad format, that you can select in Indesign (AFAIK). Now I'm checking my folio and on the iPad2, it seems well but on the iPad, retina, the text is pixelated. Help :-(

  Create a new folio and use PDF for items. If this makes no

  sense to you, I invite you to watch my new lynda.com course.

  http://boblevine.us/my-first-Lynda-com-title-Adobe-Digital-Publishing-Suite-

  essential-training is live.

  There is a link for a week of trial in there.

  You can also get app advice from Bob Bringhurst DPS. It's free in the

  AppStore.

• Adobe Viewer, iPad retina, video

  How can I get the videos to show on the Adobe Viewer on my iPAD RETINA? Some videos that I can see, but others can't. On my iPad 2, I can view all the videos on the Adobe viewer.

  More info on this question in case this thread comes in a search:

  >>>

  "The reason why the videos were playing on older iPads but not on current iPad Air has to do with the way the videos been encoded. Who has not played on the air had been encoded with the order of the fields lower value first. When that was changed to "progressive", fine played videos on the whole.

  All mobile devices have screens of progressive scan, so progressive is usually the right thing to do. I don't know any details why models previous iPad would play interlaced images and the Air is not, but I can make a guess... Apple has been quietly to denigrate a bunch of earlier codecs and QuickTime options. This is particularly visible in the Mavericks on the desktop. Now, for example, the QuickTime using Apple Animation codec files sit and convert to ProRes at the opening, because the Animation codec isn't in the QuickTime format more. »

• IPad retina always requires specifying the iOS SDK version in ADT AIR 3.7?

  According to this page, you must specify iOS SDK 5.1 in the ADT command line when you want to take in charge the retina screens:

  http://www.richardlord.net/blog/using-the-iPad-retina-display-with-Adobe-Air

  Is it always true for AIR 3.7 or is it now defaults to iOS SDK 5.1 and works for the screens of the retina without additional indication in the ADT?

  Thank you!

  You need to use SDK 5.1 or a later version. AIR uses 6.0 or 6.1 now, so the retina is ok without any special tricks.

• My iPad has been removed from secure devices!

  I received an email telling me that my iPad has been removed from my list of secure devices.  Apparently, if I read correctly, because it "has been DELETED."  But my iPad has NOT ERASED!

  I connected to my Apple ID page and restored my iPad to my secure devices.  I use 2 part checking my ID and for awhile, so I see no reason to change my password for Apple, as the email suggested (he recently changed before that), but I AM MISSING SOMETHING?

  Why would this happen?

  Have you checked the full address of the sender to see if it was really Apple or a phishing attempt?