Ipad to hp3050 wireless connection

Similar Questions

• iPad to Virtualbench wireless connectivity problems

  I just got my Virtualbench today and tried to connect it to my iPad after installing the WiFi antenna, and configure it to work on my home network. The iPad app 'sees' the VB on the network but, when the device is selected, fails to connect (it remains in a State of "connection" indefinitely, I left this past for about fifteen minutes without successful connection).

  The firmware is up to date and my laptop connects to it via the USB port very well. It also connects to my wireless laptop.

  My iPad is iPad Mini 3. Someone has seen this issue, has something to do with the iPad app?

  squelch wrote:

  I just got my Virtualbench today and tried to connect it to my iPad after installing the WiFi antenna, and configure it to work on my home network. The iPad app 'sees' the VB on the network but, when the device is selected, fails to connect (it remains in a State of "connection" indefinitely, I left this past for about fifteen minutes without successful connection).

  The firmware is up to date and my laptop connects to it via the USB port very well. It also connects to my wireless laptop.

  My iPad is iPad Mini 3. Someone has seen this issue, has something to do with the iPad app?

  I saw a few times, and my best guess is that the iPad WiFi service gets stuck requesting an IP address from the router to the network.

  Looks like you are using infrastructure mode (where your VirtualBench is connected to your existing wireless network, and the wireless led on the device is blue). is that correct? What happens if change you the mode and use VirtualBench as a point of access (with a light orange, WiFi)? What version of iOS is only your Tablet?

  Here are some other things to try:

  • Reboot your iPad.
  
  
  • Reset network - step 6 on https://support.apple.com/en-us/HT204051

• IPad mini is not connect to Wifi wireless

  Mini Wireless iPad (iOS 9.3.5) does not connect to the wifi at home but for printer and android phone will be. Have you all on iPad and mydlink router resets.

  Action taken:

  WiFi connected in Apple store - Rep suggested that make a backup and then restore iPad at home.

  Results:

  Can not stop to find my iPad / "check failed: there was an error connecting to server Apple ID.

  Several attempts, the problem persists.

  Looking for suggestions.

  Hi RubyBlu,

  I see you're posting here because your iPad mini Apple Support communities is having problems to connect to your home Wi - Fi network. You talked about since someone at the Apple Store that you said to try to restore your device using iTunes, but you can't not to disable find my iPad to be able to do. I know it's important to be able to connect to the Wi - Fi at home, and I'm happy to help with this.

  As a first step, I recommend take a look on this website and perform these steps in the order, if you have not tried them already:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  If you are still looking to restore your device to factory settings, I'd recommend double-checking to make sure that you have a current backup of first. This is a resource for that if you need a refresher on how to create a back up:
  The backup of your iPhone, iPad and iPod touch - Apple Support

  Before you can restore your iPad, you need to follow the instructions here to disable find it my function for your iPad:

  Delete a Mac or iOS device on which you can not disable Find My iPhone

  If you can't disable find my iPhone on the device, turn off the unit so it will Disconnect, then remove of Find My iPhone on iCloud.com.

  Note: You can also delete your iOS device by clearing the first - just follow the instructions below to remove an iOS device, you do not have. You can later restore the device of an iCloud or iTunes backup.

  1. Turn off the device you want to remove.

  2. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  3. Click on all devices, select the device offline, then click on delete account.

     

     If you don't see a delete account, click again on all devices, and then click the Delete button next to the device.

     If the device comes online again, it reappears in find my iPhone. If your device again, turn off find my iPhone on the device (follow the instructions above to remove a device by disabling Find My iPhone), or if it is an iOS device and you no longer, follow the instructions below to remove an iOS device, you no longer have.

  iCloud: remove your device, Find My iPhone

  When you have selected "Delete account", you should be able to restore the device normally using iTunes.

  Take care!

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• My iPad 3 does not connect to WiFi

  I had some problems on my iPad with IOS 9.3 update 3.  The 9.3.1 fixed them (link between Mail and Safari did not work).

  Last night the WiFi doesn't work on the iPad 3.  I use an Airport Extreme sitting three feet from the iPad 3 and it connects is my private or to my private 5 GHz WiFi WiFi.  My iMac 27 "5K connects.  My iPhone 6s connects.

  I see some tips for others on other Forums for Apple users affected by this problem, but not a word here on Apple's Support communities.  I find it strange because I'm not the only one to see this problem since the 9.3.1 update.

  I tried all the suggestions on other forums: reset Forget iPad3, restore Services network, the network and then re - link to it. Nothing seems to work.  I have reset the Airport Extreme (shutting off the power and then restored).  He sees all my other WiFi devices.

  I can connect to cell phone (Verizon) and that works very well.  Just can't see WiFi.

  Others on other forums have seen their judgment of WiFi after update to 9.3.1.  Maybe this isn't a widespread problem?

  Any suggestions?  Anyone else having problems connecting to WiFi?

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• 6520 photosmart e-ALL-IN-ONE s: unable to print from iPad to a wireless printer

  Cannot print from my iPad on my wireless (Yes Internet is on it) printer Photosmart of HP 6520. I tried to send a recipe and he sent me a message to my email saying that he had received and was ready to print from my Photosmart printer. But it only printed the address http at the top of the page (web address) but no recipe.
  Thanks for any help that the alleged aid 24/7 is closed for Mac devices.
  NSDeb

  Hello

  AirPrint is already built into the iPad. I have included a link below with some instructions on how to use it. As long as your ipad and the printer are connected to the same wifi network, AirPrint must operate, your printer is active AirPrint.

  http://WWW8.HP.com/us/en/ads/mobility/overview.html?JumpID=va_r11400_mobileprinting

• Resolved - problem of wireless connectivity "wlan0 link is down.

  Quick update:

  * If you encounter this message, make sure that you are trying to connect to a wireless "N".

  Yes, he is in small print on the box, right, sony will not ask you this when you are troubleshooting.

  * If you rely on Sony for smart assistance, forgetabout it.

  * After the receiver a comment card and to express my disappointment, the call center outsource sent a letter... and when I called to discuss, they were still clueless.

  Sorry, but the support structure is absolutely catastrophic.

  We now return you to your regular programming...

  ----------------------------------------------------------------

  OK, let's go, in detail:

  My Sony dashboard came again, out of the box today. It will connect to my network.

  FYI: My set of skills: I am an engineer of sales network, with an extensive network of Wi - Fi and running in my house.

  After connecting the dashboard and providing configuration information, the message I get is:
  __________________________________________________

  Network configuration
  Failed network connection...

  wlan0 link is down
  did not get an IP address
  Internet is inaccessible
  __________________________________________________

  Like others on this forum, it seems that my dashboard won't "handshake" with my wireless router.

  To try to solve problems, I did the following:

  (Slot 0): both my wireless router and my attempt to connect to the sony dashboard are in my home office, so the intensity of the signal should not be a problem.

  (1) check the connectivity wireless on a multitude of home devices: laptop, TV, iPhone, ipad... in short: Wireless works. Both with fixed IP and distributed DHCP address.

  (2) restart my Rosewill RNX - N4, wireless "N".

  (3) allow my SSID be visible (that I found which helped my LG TV to connect during its initial configuration)

  (4) checked my WLAN settings on my router:

  SSID: *.
  Security mode: WPA2 only: personal
  Type of encryption: AES
  Pre-shared Key: v * m

  (5) restarted the dashboard of Sony.

  (6) wireless seems to work on the sony dash, as the configuration screen of the network about dashboard States:
  ______________________________________________

  Network configuration
  Choose a wireless connection

  ..:| (my ssid is displayed)

  MAC address: (my MAC address of my wireless router is displayed)
  ______________________________________________

  (7) I select my SSID (FYI: nobody else displayed) and click (next)

  (8) place comes the next screen:
  ______________________________________________
  Network configuration
  Choose the key to coding (WPA2-PSK)

  HEX)
  (o) ASCII
  ______________________________________________

  I select ASCII then (Next)

  (9) he asked my key, I carefully enter (.. .slightly annoyed that the screen will not edge to allow me to see all the characters that I'm going home)..., then click on (Next)

  (10) I choose Auto IP, as during the initial setup I keep it as simple as possible... and then hit (Next)

  (11) to the top displays the following screen:
  ______________________________________________
  Network configuration
  Confirm settings

  name: (my SSID) (My MAC Address)
  AUTH: WPA2PSK encryption: AES
  key: (poster in my correct key, read and validated twice)
  automatic IP allocation (DHCP)
  _____________________________________________

  Completely satisfied with it, I select (Next)

  (12) the sony dashboard begins its Network Configuration / connection looking for the network and then...

  (13) the following:
  __________________________________________________

  Network configuration
  Failed network connection...

  wlan0 link is down
  did not get an IP address
  Internet is inaccessible
  __________________________________________________

  (14) in an attempt to solve the problems, I also tried to set up with a static IP address:

  static IP address:
  IP: 192.168.15.20
  Subnet mask: 255.255.255.0
  Gateway: 192.168.15.1
  DNS1: 192.168.15.1
  DNS2: 8.8.8.8

  ... and the results were the same: "wlan0 link is down.

  (15) as a final step, I reset my wireless router to have no. SECURITY at ALL. Guess what? "wlan0 link is down.

  At this point, I'm at a loss for what I could do "evil".

  I welcome comments from other users, either to continue to solve the problem or sharing what you did to resolve your issue with connectivity.

  Thank you.

  c.

  Well, here I am, a moth and a half later.

  After speaking to Sony technical support...

  After sending the camera back to Sony...

  After having been informed by Sony that this point had problems, they need to replace parts, AND they were going to send me a new device to save time...

  I get a new, and it has exactly the same features / problem.

  So I try another router, same problem.

  Guess why?

  Because I have my network running "N" and it's a Sony wireless B/G device.

  Anyone who has mentioned in technical support... The point on the replacement due to damaged items was total BS.

  If you have a network of "N", it will recognize your SSID and even to recognize the security there.

  But it does not connect.

  Once I changed to a mixed G/N wireless environment, it connects.

  For example, you might say my own question... should have known.

  However, Sony sells a device "B/G" when almost everything comes standard "N"...

  Not cool, Sony... Not cool.

• HP Officejet Pro 8620: Wireless connection is 'hogging' my bandwidth on router

  Until this week, I have always connected my computer to my router via an ethernet cable direct. But recently I had to move my router to a different location so decided to use the wireless on my printer to connect to my computer (laptop). When I noticed that my wireless connection for the interest rate has been substantially reduced I started checking all computer products in my house (two IPAD, a desktop and my laptop). What I've discovered, it's my 8620 was "hogging" bandwidth of the connection to the router wireless. Even if the printer is not used (but on) he continues to reduce the speed of my connection to the computer. I discovered this by:

  (a) I disabled all the computers & IPADs, but left the printer on - the wireless light on the router keeps blinking like crazy

  (b) I turned off my printer with my computer and connection speed instantly jumped about 3 x the speed

  So, with the printer off, the speed of my connection to the computer is about 3 times faster. I do not quite understand this and wonder why the printer connection to the wireless router is "hogging" bandwidth when the printer is not yet used?

  Someone has an idea?

  Hey @kenz1-_,.

  Welcome to the HP Forums.

  I see that you are having problems with your router and your 8620 e-all-in-one printer Officejet. For this problem, you must contact the manufacturer of your router or one that provided you with the router for assistance.

  Please let me know if you are able to solve your problem. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3520: Wireless connection

  Recently, I changed my wifi network in my house and found that the printer cannot connect or recognize the new wifi network. I tried the reset of the printer to its default settings and turning the router and the printer power off and power on. I do not have a USB however, so this isn't an option for me.
  I am extremely confused with the way the printer is supposed to identify the wireless network and how I'm supposed to connect to another or where I'm supposed to type the password for the network.

  Any help gratefully received.

  Hi @Jillianne16,

  Welcome to the HP Forums!

  I noticed that you can not connect your HP Deskjet 3520 to your new wireless network. I'm happy to help you with this problem of connection!

  A few questions for you:

  1. What operating system do you use? If you do not know the operating system you are using, please visit this site. Whatsmyos.
  2. You are able to print a test page with your printer? Video: print a Test Page-HP Deskjet 3520 e-all-in-one printer. (That way we know that material the printer works properly.

  In the meantime, please see this message, How to connect a USB-wireless printer to a wireless network without PC, by @jason_h. If you do not have an iPad as indicated in this message, using your computer, open a web browser (for example, Firefox, Google Chrome etc.) and put the IP mentioned in this post in the address bar of the web browser. Then continue with the instructions in this post.

  Otherwise, if this post does not help to connect, I would very get a USB 2.0 printer cable at a local store. Once you have the cable, you can connect temporarily to your computer and convert a USB connection to a wireless connection, what could be easier.

  Hope this post will help and hope to hear from you soon!

• Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

  I have a Dell laptop which does not connect to the internet via the wireless connection.   I can connect via a line to broadband, but not the wireless.   My work PC and iPad are connect.  I tried compand repair network and he says that the problem is resolved.    I tried a system restore a week before that the problem started.

  Any other suggestions?   Thank you

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for vista, win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Bluetooth wireless connection

  MacBookPro OSX El Capitan; Version 10.11. Retina display - MacBookPro connects to the printer HP C6150 help electrician with no problems. not then attempt to use the bluetooth connection.

  To a printer wireless connection works using old MacBook. Bluetooth connects to the mouse and works very well.

  Select the Bluetooth device-

  The computer icon shows - not connected

  Apple mouse - connected

  Hello analyst.1,

  Thank you for using communities of Apple Support.

  I understand that you can print from your MacBook Pro to your HP using Ethernet and wireless printer, but not via Bluetooth. I know how it is important to ensure that you can connect to your printer via Bluetooth. I'll be more than happy to help you with this.

  Use OS X El Capitan: Add or remove a printerand make sure you have the latest version of the software installed and printer connection instructions, specifically, this section:

  Add a Bluetooth printer

  1. Update your software: choose the Apple menu > App Store, click updates, and then install the listed software updates. Even if no updates appear, this ensures that OS X has the latest information on printing software you can download from Apple. If you don't do this, you see a message that software is not available when you connect your printer.

     If you have a printer AirPrint, you have no need to check the software updates.

  2. Prepare your printer: use the instructions that came with your printer to unpack the printer, install the ink or toner and add paper. Turn on the printer and make sure it is not the display of errors.

  3. Connect your printer: follow the instructions that came with your printer to make sure it is ready to connect through Bluetooth. You must also make sure to activate Bluetooth and set up the printer Bluetooth as a new device.

  After connecting your printer, if you see a message prompting you to download new software, be sure to download and install it. OS X will automatically use AirPrint if your printer supports.

  Have a great day!

• IPad Mini will not connect to WiFi

  My IPad Mini does not connect to my WiFi at home. All other devices in the House are connected correctly. It seems that my IPad Mini or the router. I was working well until that Friday. I have reset the router and the IPad Mini, forgotten network, rebooted both, and nothing seems to work. Any further suggestions?

  I suggest to do a hard reset (hold home and power button at the same time) If you have not already tried it. That's worked for me before when nothing else has.

• How to configure a printer wireless connected to Time Capsule?

  I just bought a printer HP Color LaserJet Enterprise M577z MFP Flow. It has capabilities of wireless printing. So far, I was able to connect wirelessly to one of my MacBook Pro computers, but only by having the printer create an Ad - hoc network that allows up to 5 devices to connect to the printer. But that of not what I want because every computer should manually disconnect the Wi - Fi network, connect to the Ad hoc network, the print job and then reconnect to the Wi - Fi network whenever a print job is required. It is very difficult and frustrating.

  What I would like is striking is the printer act like a network printer by wireless connection to my Time Capsule. I can't connect the printer to the USB port of time Capsule because they are far away from each other, and I don't want to use cables throughout my place. But I have no idea on how to do it because I can't find this option in the menu of the writer or configuration of the United Nations the HP utility software.

  I hope someone here could help me, please. Thank you!

  I have an Epson printer, so some of my experiences may or may not apply.

  I also have a time Capsule, and my printer and Time Capsule are far apart.

  My current configuration looks exactly what you are looking for: a wireless network provided by Time Capsule than all my Apple devices to a wireless connection, and my printer connects to the same wireless network.

  When I first bought the Epson printer, I needed to connect it to the Capsule of time via a USB port.  This sounds as if it were true for you as well.  So, for this very short period. I moved the printer via the USB port next to the printer, the connected Time Capsule, made the setup and then the printer recognized my standard wireless network.  I've returned to steady state, which I use now, with the printer and the far (actually on different floors) Time Capsule.

• 7520 HP loses the wireless connection. What can I do?

  I've seen lots of talk about HP products, loss of wireless connection.  I have the same problem with my 7520.  Initial Setup is perfect, but he began to lose the connection when it went into standby mode.  Someone at - it a solution?

  THERE IS A FAST SOLUTION!
  On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
  From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
  A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
  The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
  Go to a BBQ and stop wasting your time on this issue.
  Ken