IPad wi - fi MAC address not "MAC address" according to the Linksys router

Similar Questions

• computer does not receive a response from the wireless router

  The wireless router sees my computer wireless MAC address, but never assigns an internet address. Can anyone tell me what the Protocol of communication happens. Could help me solve the problem. Thank you.

  ROCKST * R, I saw your answer on the firewall, so I advanced and off. Now, I can connect to wireless internet. I.m a happy camper. Thank you.

• I received a message on my laptop computer that says not able to connect to the wireless router.

  I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.

  I think you have transcribed the number incorrectly.  I think that the article you want is this one: http://support.microsoft.com/kb/871122

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• Not able to connect to the wireless router

  Hi all

  I have a working wireless network managed by the router Dlink DIR - 655 that I can not connect my laptop HP Pavilion dv7-3165el with operating system Windows 7 SP1 64-bit, the network card Atheros AR9285 WiFi adapter 802.11.b/g/n of the "Device Manager", which is up and running.
  The Windows tool "Network troubleshooting" is not able to resolve and connect my laptop.
  'HP Wireless Assistant' tool means: Wireless Lan = we.
  The tool 'HP Support Assistance' means: Wireless LAN = not connected.
  Please if anyone can give me some information.

  Thank you and best regards.

  VittorioFacc

  Thank you Paul for your answer.

  I'll do as you advise me because I think you're right, I've seen too many settings to operate a network related settings of the computer, and rather complicated.

  In any case thank you for your kindness.
  Greetings, Vittorio

• Linksys Router WRT160N - Wireless does not connect to the cable modem

  I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

  I have configured the router N new for

  "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

  I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

  I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

  Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

  If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

  If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

  (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

  (2) Please indicate your ISP

  (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

  (4) Please do the following test:

  Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

  Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

• My small business SF 302-08 Switch will not let me apply the command "Routing".

  Hi everyone, my switch cisco small business SF 302-08 has the latest firmware and I want to activate the command routing, but it doesn't let me do that.

  I've read the reference guide for orders, do all this procedure: IP Routing Protocol independent commands starting at page 629, but nothing happens. I need this because I want a routing between VLANs

  Kind regards.

  Hi Felipe

  Look forward to hearing how you go.

  If you reset the factory default switch and the switch is NOT connected to a server, the switch restarts with a default IP 192.168.1.245 address according to the Quick start guide .  If your PC has a static address 192.168.1.2, you should be able to access the graphical interface of the switch.

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/sf30x_sg30x/Quick_Start/78-19252-01.PDF

  If the switch is connected to a DHCP server, the switch Gets an IP via DHCP.

  I've had problems using hyperterminal on my Windows 7 box, that I have overcome by restarting my PC in order to free the COM port.  Settings of the console are;

  • 115200 bits per second
  • 8 data bits
  • no parity
  • 1 stop bit
  • no flow control

  If you really have problems, and you think that the switch is faulty, you have the possibility to use the services of small business Support Center (HWC) in order to identify if the switch is good or bad.

  The URL that watch phone numbers are lower;

  www.Cisco.com/go/SBSC

  Best regards, Dave

• According to the journal of DDPE encryption starting not due to the fact that the the TPM Base Services (TBS) secure is not started

  Basic services of the title: original TMP (TBS)

  I'm running Windows 7 x 64 SP1 Enterprise Edition.  We use DDPE to manage BitLocker.  Laptops are not encrypted.  According to the journal of DDPE encryption starting not due to the fact that the the TPM Base Services (TBS) secure is not started.  Open services.msc and realized that TBS was not even as a service.  Research on TBS and found it's relies on the file "tbssvc.dll.  This file is not anywhere on my PC, (should be in Windows\System32).  I hope someone can help me with the following questions.  I'M assuming that TBS is a Windows service?  He would appear in a standard installation? Windows Update?  If it is standard, and it does not install, is there a way to reinstall the service?  I found a link on the Dell site that got copy tbssvc.dll from a work computer, paste it to a computer for non-working, create new registry keys and register the dll from the registry.  It works, but I prefer not to go down this rabbit hole if there is a simpler solution.  Thanks for your help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The menu system default language does not change according to the location that uses in-app

  Hello

  I have an emergency in application if you can reply me as soon as possible.

  In fact, I've implemented localization in application for Os 5.0 for 7.0.But, I extract some problems on specific devices so can you help me out for short.

  My problem: -.

  I use both languages in my application 1. Netherland and 2. English.

  Then 2 type of different scenario produced

  1. whenever the user change language of application at this time menu default language (Close, keyboard and Application Switch) no change. These are the ways that they change language according to the language of the camera. But this problem go get some specific device as 9850 for Os 7.0 and 9300 for Os 6.0.

  2 even conducted no user in another device like 9300 Os 5.0,8900 Os 5.0,9800 Os 6.0, 9900 Os 7.0 and Os 7.0 9320 ect... When this default menu (Close, Application Switch) changing the language according to the language of demand. These are the ways that they do not change language according to the language of the camera.

  Hello

  It's the Os.

  I confirm with the BlackBerry support team.

• Instructions for managing macs w ARD on the internet (no static IP address)

  Please excuse me if it's asked all the time, but I searched and can not find detailed instructions for this.

  I need to manage more than one Mac, on connections to the internet, the devices will not be on the static IP, they will constantly be moving around.

  All the videos I have found online seem to show how to connect and manage Macs on LANs w ARD.

  Details:

  ARD v3.8

  All Mac on El Capitan

  Very appreciated for any help!

  This question is not particularly related to Apple Remote Desktop; for ARD.  This is a configuration of generic firewall and networking question, so good enough instructions for your specific firewall will work here, as long as the firewall can redirect ports - port TCP 5900, in this case - or if your particular firewall has a VPN - Firewall Server average range and high-end frequently - or if you can implement a VPN server behind your firewall and configure the firewall to forward the VPN protocols (different ports) and ports necessary for the particular VPN.

  In general...  I would suggest three ways...   1: set up your firewall to port before port TCP 5900 to the client target.   Maybe TCP 5988.   Or set up a VPN server in your firewall and connect to that and use ARD via a VPN.    If you want to access more than one system on the target network, you will need to either use a range of ports to forward to specific systems behind your firewall and happens to be a problem with many customers - I don't know immediately off-hand if the ARD client allows even to select different target ports - or to set up and move to a VPN.    2: creation and configuration of the VPN server in the firewall allows access to all systems on your network target - a VPN connection makes your local system as it is directly connected to the target network.  3: If you have the VPN server running on a target system and accessible through the firewall port forwarding, this target system must always be available, and all VPN traffic is routed through this system.   It is more complex and can also be a bit difficult to set up.

  If you directly expose ARD ports to the Internet via port forwarding, you'll want to either restrict the available source IP ports (to reduce the magnitude of the attackers), and you'll want to be very careful about passwords on target systems.   Ports of the ARD are detected very fluent, and several people and botnets will attempt to access the system password-baited; trying to guess the users and passwords on the target system.   Once attackers have a login and a password, they will then try to spread throughout the rest of the network.  (It's part of why I prefer to use virtual private networks).

  Sierra of MacOS support PPTP VPN, so I wouldn't go with any configuration of VPN that you considered it.   I'd probably use L2TP/IPsec, because the customer is generally available in most of the other operating systems, Mac OS and iOS.

  There is information available on the network ports used by Apple devices.   If you enable VPN port forwarding, there are discussions on the ports and protocols required to according to VPN you use posted around the ' net and not all firewalls is particularly good to port-forwarding, the protocols and ports VPN. "  Low-end older firewalls and firewalls tend to have problems here.

  To locate on the networks of the target systems, you get to use dynamic DNS from client devices or other means to identify the public IP address that is associated with the target customer.   If customers are roaming on disparate networks and not simply roaming IP addresses on their private networks (these addresses can be fixed through DHCP configurations, too) and if you don't have access to intermediate firewalls, then you will probably have to rethink the entire approach, unfortunately.    Connection to mobile systems distance arbitrary is not especially it is possible, he must do something on the client that "tags" or "ad" its network metadata to your own server from tracking client or server monitoring of some other entity (for example messages to the DNS servers used by the dynamic DNS providers), or the management connection must be initiated from the client.    ARD does not support these mechanisms.   Discussions here can get pretty complex, too--in terms of network configuration, both in terms of security for the clients and servers.

  There are a few related discussions this general topic in the forums. See here, here, here, here or here.

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Firefox does not delete browsing history in the address bar

  No matter what you with Firefox in clearing the browser history by going to the history-> delete history, recent and all delete or reset FF by accessing information from troubleshooting, Firefox does not browsing history. The Web site you have traveled still appear in the address bar.

  Several people have already complained about this (see thread https://support.mozilla.org/en-US/questions/939028) and the response from the staff of Firefox is that it is be a malware. That's not true, I've seen versions of Firefox in own computers Windows and Mac with Firefox, do the same thing, or rather not do what it is supposed to do: clean browsing history.

  How dangerous is that. Where your privacy? Firefox must find a way to fix this glitch. Something tells me they do it on purpose because it has not been fixed after him complains.

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• What happened to my address bar? The desktop view does show not all bars address for all the pages I want.

  Is no longer, I can see the Firefox address bar. He disappeared, and I don't see any url addresses when I am on a Web site.

  Note that you can always make up a replacement address bar via the shortcut Ctrl + L.

  Also make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.

  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  See also:

  • http://KB.mozillazine.org/Prevent_websites_from_disabling_new_window_features

• iPad Pro vs Mac book for College?

  Hey all,.

  I'm at College right now working on a degree in biomedical physics and planning to go to medical school in the next two years.  I need a new computer, I can record lectures, take notes and write papers and do the graphics.  I'm looking to either a 13 "Mac book Pro with getting an iPad Pro with the pencil and keyboard or the retina.  Really, I'm leaning toward the iPad Pro but I'm not sure if could or can do all the stuff that can make the Mac book.  Any advice would be great; like, what are the limits or the other, which can do it book Mac ipad can't and vice versa?

  Since the iPad Pro is a Tablet and not a real computer, like the MacBook Pro is, he will not be able to do all the things that the MacBook Pro can do.

  The largest decline in the iPad Pro is that it turns the mobile firmware, iOS, while in the other the MBP runs OS X, which is a variant of Unix.

  An another short coming of the iPad Pro with iOS, it is that it doesn't have a file system. On the contrary, the data is stored as part of the application. This a more limited measure implementation then file system used by the MBP and HFS +.

  The number of accessories that can be attached to an iPad Pro are much more limited then what can be fixed on the MBP.

• Cannot open safari on iPad message of invalid address

  ON iPad mind iOS 9.3.2,and trying to open the live stream on ITV, message from safari "cannot be opened due to an invalid address.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  Reset your network settings.

  Settings - general - reset - reset the network settings