combo rom drive does not not on windows 7 and vista

Similar Questions

• P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

  Version of Windows 10 Home 1607 (Build 14393.187)

  Hello

  After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
  The D: drive does not appear in Windows Explorer,
  CD-Audios and videos / DVDs do not work.

  In the Device Manager, the following legacy status error message appear:
  "Windows cannot start this hardware device because its configuration information.
  (in the registry) is incomplete or damaged. (Code 19). »

  Could you tell me how to solve this problem?
  Thank you.

  The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
  I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

  More information here:
  http://www.borncity.com/blog/2007/08...-verschwunden/

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• CD-ROM drive does not all discs.

  Well, today I bought a new wireless router, and I had run the installation wizard. I opened the CD-ROM drive, insert the disc, and then closed and waited. After a few minutes, nothing. I opened and closed several times and still nothing. I put another disc and it does not read or the other.

  Can someone explain why the drive is not working or read all disks? I spent $70 on the router.

  The drive does not has nothing to do with the router. You are able to read one of your usual cd? Have you tried a cd lens cleaner? If it will read something other than the disk, there is a lack of drive (in this case, sigh...) or other Setup has detected and blocked the autorun and the setup.exe for some reason any. This you can check click with the right button on the device and choosing 'Explorer' and not 'open '. If it shows you the files on the disk, right-click on the setup.exe file, click Properties, and make sure that you have permissions to run the program under the Security tab. In addition, the first of the properties tabs will specify if windows has blocked the executable to start and will give you the possibility to activate or enable it via the checkbox. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• DVD - Rom drive does not

  I just had my Dell Inspiron 1318 in the shop for service, and when she came back I had to reinstall a lot of my old software.

  The Sony Optiarc DVD +-RW AD - 7640A DVD - ROM drive in my computer didn't have to be replaced at the shop and worked well for the first hours of operation of the system. I had reinstalled Office ' 03 and Roxio DVD burning software and it would try to install something else when the drive has stopped working.

  I also run updates of the system before you attempt the installation of Office 2003, etcetera.

  When I insert a disc in the drive, it produces noises as if she is trying to run or to read the CD before ejecting again.

  I am running Windows Vista Home Premium with Service Pack 2, almost completely updated.

  I tried a system restore to the last point of operation disc drive, and then I tried to update my drivers. When he said that I had the more recent/better driver, I uninstalled the device and rebooted. Finally, I tried the Mr. Fix - it on the Microsoft Web site. Nothing has worked.

  Anyone happen to know what is the problem? I need to have this drive works in short order and I really do not have to return the system to the shop for repairs more literally the day after getting it.

  Hello

  The Roxio probably malfunctioning filters and if so the 1st steps here that will correct.
  If they do not solve the problem, then work your way through the rest as needed.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L40 - 139 - CD-ROM drive does not

  My CD drive does not appear in my computer and when I use the Device Manager I see a yellow box with an exclamation point get this message when I go to its properties
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  -What this means and how can it be solved?

  I think this question has been asked 100 times in the last two months and you can find the answer in two minutes only by using advanced search option.

  But once again for you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  Good luck!

• Aspire 5552 laptop cant restore as CD-Rom drive does not now

  I've updated to Windows 10. I have discovered from Acer that my laptop is not compatible. Oops. I want summer to completely clean my laptop back to its factory condition that I had a few glitches and blue screens. I have the backup disks that I created when I got the laptop, but now my dvd drive does not at all. If not, how can I do this? Any help is appreciated.

  OK so I thought I would add this in that I just talked to someone from Acer support. They suggested that the first thing you can do is to roll back to Windows 7 by following the steps on this page...

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/37930/kW/roll%20Back

  Then, you use an external optical driver, use the recovery CD to take back to factory settings. I check on amazon and an optical drive is only £10-20 so might be useful to take just one punt on this.

  Hope this helps someone else.

• CD-ROM drive does not open

  Separated from this thread.

  How can I open a disc in my drive, but does not open on my screen?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• CD-ROM drive does not

  My CD drive does not work and the following message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I tried the standard troubleshooting and also tried to uninstall and reboot, but the problem remains.

  Any advice?

  Thank you very much

  Neil

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

  If so, for UpperFilters and LowerFilters, value which is listed under "data"?

• Failed to install driver Realtek HD Audio in Windows 7 and Vista [Ultimate]

  I didn't install the Realtek HD Audio driver in windows 7 and Vista.When I install it it displays a message "error code:-0001. When I install after installing graphics driver card it says "Error code: 0 x 000000103 ' a few days it worked fine without any errors. But since yesterday, I am facing the problem. I tried to install it on safe mode and uninstalled the driver of HD by default. Then it installs perfectly but I can't hear any sound and when I start my PC the default driver installs automatically. Help, please! What can I do? This problem does not persist in windows xp.

  Hi JohngLittle,

   

  Method 1

  What is the brand and model of the computer?

  What is the status of driver for sound card and graphics card driver in Device Manager and the steps to display sound and graphics driver in Device Manager include the following:

  1. click on Start

  2. in the search box, type run

  3. in the run window, type devmgmt.msc

  4. in the search for a Device Manager window for sound and display

  Check if there is no exclamation point on them or not.

  Method 2

  If you find the exclamation point on these options try to update the drivers and is the link, you can refer:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  NOTE: try to go to the website of the manufacturer of the computer and try to install the compatible sound card driver and graphic drivers and check with the question...

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you and best regards.

• I have windows 7 (64-bit) and my DVD - Rom drive does not work. For some reason, that I disabled it, how can I activate it? Thank you, Billy

  This issue should really be down here. There is nothing to add.

  Thank you
  Billy

  Hi Billy,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, you have problems with activation DVD ROM.

  Have you tried the steps suggested by Sandeep V from the link below?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-am-running-Windows-764-bit-and-my-DVD-ROM-has/0e7c6ec1-e61c-40af-8d88-af816681e1ba

  Answer to us if you have problems with activation DVD ROM or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• DVD Rom drive does not open when I try to eject a disc

  Original title: dvd rom

  HI.i can open rom.i push to eject dvd but dvd rom not the open.can help me.

  Hello

  1 is this blink when you press the button to eject the CD/DVD drive?

  2. is there the CD/DVD in the CD/DVD drive?

  3 did you changes to the computer before the show?

  4. don't be the CD/DVD drive not detected in the Explorer(My computer) Windows?

  If the led does not illuminate, the reader is disconnected or broken. In this case, you may need to contact the manufacturer of the mounting of the CD/DVD drive system.

  If the led does not blink, you can try the following:

  (a) open my computer

  (b) right click on the CD/DVD drive

  (c) click on Eject and check if the CD/DVD drive eject

• My dvd/cd rom drive does not open

  I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.

  Hello

  Try using a tip of a paper clip to open the tray.

  "How to create a trombone in car opener.

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  "CD-ROM, DVD or other drawer not open."

  http://www.computerhope.com/issues/ch000214.htm

  See you soon.