iPad with Safari after upgrade issues

Similar Questions

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Question connection with Blast after upgrade to view 6.1.1 ("your office may have a security certificate not approved")

  Hello guys,.

  We are facing a very strange problem with Blast after the upgrade to view 6.1.1. Let me show you the scenario:

  We have two security servers (paired with two servers connection).

  On both servers security (and on the servers of connection), the default self-signed certificate is used.

  Secure Tunnel, PCoIP Secure Gateway and Secure Gateway Blast are activated.

  Users access it from internet via Netscaler which balance the traffic load and present a trusted signed certificate.

  For now I won't go in deeper into the Netscaler configuration, as it was working fine.

  We were on view Horizon 5.2 and everything worked fine! ...

  After the upgrade to view 6.1.1 we are unable to connect using the web browser! We can open a session and select the desktop, but as soon as the connection to the desktop is launched, we receive the following error message:

  "Your Office has been disconnected.

  Try to reconnect to the office...

  Your office can have an untrusted security certificate. Click here to accept the security certificate, then try to connect to your desktop again. »

  

  If we click on the link, we are redirected to something like https://Blast_External_URL:8443/r/F386565D-D068-4AC1-BFD3-3A903CBEB235/certAccept.html , receiving a blank page with the following text:

  "Could not resolve the route of proxy for the request.

  Just before the upgrade, we have been able to use the HTML Protocol! We have does no change at all, so I really think it's related to some changes introduced by the new version of Horizon view, but may not know what is causing the problem.

  No problem connecting with the customer to view Horizon (PCoIP and RDP).

  If in the external URL Blast Secure Gateway, we insert the hostname of the server security instead of the external URL (Netscaler), we are able to connect but of course only from our local network.

  Someone at - it ideas?

  Thank you.

  Hi Calyps0Craig,

  Yes, I found a solution for this. In our case the issue was resolved by changing the configuration of Netscaler.

  In the past, we use SSL offloading and worked all protocols. It seems that with the new version of view SSL offloading does more work.

  Change the Service and virtual server on ports 443 and 8443 for SSL to SSL_BRIDGE solved our problem.

  Hope this will help you.

  Best regards

  Claudio

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Uninstall old Oracle s/w after upgrade issue with uninstall utility

  Hello

  As Oracle recommends to use uninstall utility to remove the s/w Oracle and supports using YES/runInstaller. But I have a small question which became a little tricky for me...

  I'm afraid at this stage:

  Specify all headphones single instance that must be configured out [LISTENING]:

  As used listener is with the name LISTENER himself, and if I just come in the step above, it will stop/in-configures the new listening port used :-( It happened to me the last time.

  http://docs.Oracle.com/CD/E17984_01/doc.898/e22498/deinstall_db_em.htm

  Lines pasted from the above link: listener will be deleted like this I'm afraid:

  {code}

  Out another single Instance provisioning: LISTENER

  Listener configuration: LISTENER

  Stop listener: LISTENER

  WARNING: Could not stop the listener. Listener can not run.

  Remove listener: LISTENER

  Listener deleted successfully.

  Listener configured successfully.

  {code}

  I downloaded uninstall utility for version Linux_64 and software to remove is 11.2.0.2 on BSG - 64

  . / Uninstall - home /oracletempbackup/11.2.0/gridhome_1

  Please suggest to handle this step of the configuration of the listener.

  Thank you very much.

  P.S New forums interface is very pretty, but it will take time to get used to it... {Code} was very good option, I'm sure it will be the same, I use it wrong somehow :-)

  Best regards

  Rather than use the deinstall utility separated, I used the deinstall script the ORACLE_HOME I wanted to uninstall, and it worked fine.

  Not destroyed ORACLE_BASE, as he said, ORACLE_BASE won't be outside configured as 11.2.0.3 that oracle_home is running it.

  Secondly, in this sense, uninstall script did not ask the listener to be configured.

  Best regards

• Problem with Safari after the last update

  RE: Security update 2016-001

  Version of Safari 9.03 update

  Version of Yosemite 10.10.5

  Friday, I installed the latest update from security 2016-001. Since then, Safari is almost unusable.  Unable to connect to Pandora, unable to connect to my paying investment sites.  iTunes radio is very slow and almost no functioning.   Is anyone else having the same problem?

  I would appreciate help in resolving this issue.

  Thank you

  Phillip

  I was having the same problem and read a solution for this problem here: no internet after update of 2016-001

  If you have ESET cybersecurity or Pro is installed, uninstall and reinstall. Make sure that you have the newest version dmg before you start. The instructions in this thread, that I linked will not uninstall ESET. Uninstall using the uninstall tool. Shut down your computer. Restart and reinstall using the installation tool. It fixed for me. I had 2 days of the internet unusable for half of the sites I tried to visit. Even this site took 5 minutes to load. Either slow or no load on Safari and FF. Everything goes well today, although I've submitted a ticket with the people of Eset, they are working on a fix.

• Problems with mail after upgrade

  After the update from El Capitan with macOS Sierra my e-mail program does not stay open longer than 3 seconds. I have an end 2013 27 "iMac 3.5 GHz Intel Core i7 with 32 GB of memory.

  Is there any solution for this or am I the only one having this problem?

  Thank you

  Bob

  Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.

  You can use the guest user or create a new user to test.

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Switch to the new user by logging incoming/outgoing or use the fast user switching.

  You can skip connect with an Apple ID, unless you need to test apps to iCloud. Hit continue and then jump.

  By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.

  You still see the issue?

  If Yes, then the problem is with your core files.

  If not, then the problem is in your user folder.

• Problems with fonts after upgrade to Windows 10

  After the upgrade to Windows 10. Some of the police are white with black outlines makes it difficult to read a few pages. I refreshed and reinstalled firefox and it's still there. I disabled and deleted all the addons and it's always the case.

  Both pis. My only solution is to delete the font cache. Restart the PC and uncheck the allow the Web Sites to choose their own and simply used the Arial font. I can read very well now. For some reason any double check the last option is by default the text to look like that. Does not occur in Google Chorme then Yes.

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• Problem with WSUS after upgrade of SQL and SCCM

  A few years ago, we implemented SCCM 2012 R2 on a virtual machine running Server 2008 R2 (Enterprise), using 2012 SQL for databases.  We use it for software deployment, updates/patches via WSUS and imagery of the network.  Everything is smooth enough for most, even if we hit a few snags Windows 10 points when that came out.  After you install the patches and updates to our Server 2008 box to make it compatible with Windows 10 content, everything was good again.  A few weeks ago, I decided to update our version of SCCM 1511 and SQL for 2014.  After the two updates, I tested imaging and software deployment, and everything seemed good.  I forgot WSUS, however... and later visited account it was not working properly for these updates.  Unfortunately, I realized after I deleted the VM snapshot, I got to thinking that everything was good (stupid, I know).  After researching and discovering some of the errors were permissions associated with - why would have changed the permissions on folders of SQL and SCCM upgrade I have no idea - those who have since been smoothed.  Now, my mistakes seem to be related SQL more and I hit a dead end with research.  When I opened WSUS and go look at the clocks, he tries to load the history of synchronization, and after a few minutes-error with the following information:

  The WSUS administration console failed to connect to the WSUS server database.

  Verify that SQL server is running on the WSUS server. If the problem persists, try restarting SQL.

  System.Data.SqlClient.SqlException - Timeout expired.  The delay before the end of the operation or the server is not responding.

  WARNING: The join order has been applied because a local join hint is used.
  Source .Net SqlClient data provider
  Stack trace:

  to Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow (SoapException-soapException)

  at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetSummariesPerUpdate (String computerTargetScopeXml, String preferredCulture, String updateScopeXml, ExtendedPublicationState publicationState)
  at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetSummariesPerUpdate (UpdateScope updatesToInclude, ComputerTargetScope computersToInclude)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetUpdateSummaries (UpdateScope updateScope, ComputerTargetScope computerTargetScope)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates (ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)

  at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows)

  I found a few forums that suggest to uninstall WSUS and delete the database, and then reinstall WSUS.  Unfortunately, when I try install fails... giving only an error code and no other explanation of why.  The error is 0 x 80070643, which is supposed to be due to the current user not having the "sysadmin" in SQL.  However, I have tried with several accounts I checked to make you have the sysadmin role in SQL (and are also part of the Administrators group on the server itself)-always get the same error message.

  I would really like to try to find that rather than wasting his time with the construction of a new server and redo our whole SCCM environment... get the client reinstalled on all our machines to synchronize with a new server appears as a huge headache.  Is there anyone else out there who know what would cause this?  Any help would be greatly appreciated!

  Hello

  This community is for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  SQL Server TechNet forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Mac overheating using safari after upgrading to Sierra

  My Macbook 2012 mid pro 15-inch was overheating after using Sierra for 10 minutes.

  Watch safari activity monitor is the cause of this. I deleted the history, cookies and data from the Web site, even reinstalled Sierra, but seems does not work.

  Uninstall "Trusteer" according to his instructions. The following may be useful:

  https://www.Trusteer.com/support/uninstalling-rapport-Mac-OS-x

• Trouble with Safari after update OSX

  Hi all

  I have a MacBook Air in hands. End 2010.OSX Yosemite 10.10.5

  Last night the program update asked to restart the computer after the update has been downloaded.

  I shut down the computer and restarted this morning.

  What I see now:

  Safari no longer works: she opens on the web pages and then displays a message saying: it does not, and then the page is empty

  App Store program does not work: it does not updated but tells me that I have still 4 updates to download.

  Google Chrome works.

  But it is a mystery and a pain.

  If anyone can help.

  Thank you all.

  Lopez

  Try restarting mode without failure. Safari works then? If so, reboot normally and try again.

  OS X El Capitan: start in safe mode

• gestaltSystemVersion crash with Safari after 10.11.5 installed + migration

  I recently did a fresh install of 10.11.5, then used a backup to import my old data and account with the Migration Wizard. As far as I know, everything works perfectly except Safari.

  Safari crashes as soon as it is started to say: http://pastebin.com/6Npaydd0

  I tried to delete the preferences of Safari, looking for malicious software, remove the extensions and plugins, as well as make another installation just above my 10.11.5 + data current. Chrome works very well.

  I also did a new user account to test here. The same problem.

  Any suggestions?

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

• problem with netflix after upgrading to firefox 6

  now that I've upgraded to firefox 6 I can't spy snapshot netflix more. Please help I don't want to use a different browser to do this.

  This also works if you have problems with the update of Mozilla FireFox 10.0 if you dress like 9.0.1 in accordance with the instructions of the DavidLee1951. Thank you, David Lee!

• Need help with Activation after upgrading to Vista

  Separated from this thread.

  Hi Gerry,

  I need help to reactivate.  I lost my case and if the product key.  I have upgraded from Vista pre-installed on my desktop HP for Windows 7 Professional 2 years back and recently meet with problems and my reason for re-setup. Please find the details below you requested.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - CM74G - RPHKF-PW487
  Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
  Windows product ID: 00371-177-0000061-85643
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {E9827CAB-B22C-4676-8C2F-F77EDCD000E6} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_rtm.101119 - 1850
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E9827CAB-B22C-4676-8C2F-F77EDCD000E6}1.9.0027.06.1.7601.2.00010100.1.0.048x 32*-*-*-*-PW48700371-177-0000061-856435S-1-5-21-439732754-3583098255-2330885285HP-PavilionFK869AA-Y2K A6640DPhoenix Technologies, LTD5.2220090507000000.000000 + 000A5E63007018400FA04090409China Standard Time(GMT+08:00)03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-177-000006-00-1033-7601.0000-2262016
  Installation ID: 002356937435887266876642539776934946293206562961099182
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: PW487
  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 3
  Time to trust: 13/08/2016 23:04:17

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LgAAAAEAAgABAAEAAAACAAAAAQABAAEAJJR687d2wBKqdswpOrBWvv + i8gkqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT PmRef CpuPm

  You use the default key that cannot be used to activate Windows 7. You must enter your product key Windows 7 Professional.

  Try the Activate by phone:

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us