IPalm IIIxe 8 MB PDA

Similar Questions

• Stack of Windows Mobile 6 and BT-> how to set up PC-> PDA-> Internet connection

  Hello

  My configuration: another laptop manufacturing with TrueMobile 350 (Toshiba stack)
  and a PDA Windows Mobile 6 PocketPc (Phone Edition) (TyTn)

  I would use my PDA as a server of PAN to use its internet connection with my laptop (PC-> PDA-> Internet. I combined the two devices, but when I activated the Internet sharing on my PDA I have no function on my laptop to access the PAN, created by the PDA.

  "Auto-discovery is the only way to implement the services. However, the PAN service does not appear unless the devices are paired.

  Toshiba can only pair with devices seen in the discovery... "
  http://Forum.xda-developers.com/showthread.php?t=297561&highlight=Bluetooth+intern and + sharing

  I'm not the only one with a problem and I have already installed the battery v5.

  Hello

  Have you already checked this Toshiba Bluetooth 'FAQ' and 'How to' area?
  http://APS.toshiba-tro.de/Bluetooth/

  You will find HOW TO useful documents e.g. on:
  -Internet on PDA via PAN used for Gateway Laptop
  -Browse for computer laptop-sharing via PDA and PAN
  -etc.

  Maybe you'll find some useful tips.

  PS: Sorry I m not an expert of BT and, therefore, I can't say much about this case

• Wireless connection P20 for PDA

  Just bought a P20 & am tearing my hair out trying to connect my Axim PDA. Is not not a geek, I turned on the WiFi on the PDA and the PDA but not 'See' each other.

  WiFi says Control Panel works fine

  Does anyone know a good step by step guide that Toshiba/Windows Help is not help.

  Thank you
  Warren

  Hi Warren

  You already did link between P20 and PDAS using the cable? Before trying to make any kind of connection you have to the synchronization between the two units using cable. If this works correctly after that you can try to make a wireless connection.

• Problem of BT connection with WM - PDA Asus P526 and Satellite A300D - 17G

  Laptop - Satellite A300D - 17G
  PDA - Asus P526 (Windows Mobile 6.1)

  1. laptop 'see' my PDA.
  2. it adds PDA to the list of associated devices.
  3 starts the connection and give him a problem - "Device does not connect.

  Help me please!

  Visit the following Web site:

  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Enter the following search terms: "windows mobile 6 Bluetooth.

  Some useful documents should be listed.

• Bluetooth connection between Equium M70 and TREO 650 phone/PDA

  Hi all

  I have Toshiba Satellite M70-173 and come from TREO 650 phone/pda
  I want to hotsync my laptop and pda with bluetooth.
  How can I go? My laptop shows bluetooth stack, how can I activate bluetooth, what I have to buy the bluetooth adapter?

  Kindly help
  Concerning
  Maryline

  Palm based, isn't? If so, then check the HOWTO of the Toshiba Bluetooth site section:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists a HowTo called "HotSync over Bluetooth (TOSHIBA PC - Palm-PDA).
  It is perhaps useful to you.

• How to set up the connection BT of PDA?

  Hello :)

  PDA cannot find the ActiveSync service, although Windows Mobile Device Center 6.1 runs, and the COM port is configured appropriately.
  PDA HTC P3300 Artemis-WinMob 5.0, Bluettoth, latest version 7.10.10 USB adapter
  IVT BlueSoleil works very well

  Manual * 'How to configure a connection between the PDA (Windows Mobile 6) and the Windows Mobile Device Center' * not help

  Windows 7 64 bit

  Check if the COM service is running:
  -Right click on the Bluetooth system tray icon
  -Select 'Options. '... »
  -Ensure to that 'Bluetooth COM port Service' is checked in the "Général" tab

• Toshiba SD Bluetooth SDIO card - BT00P to use WinCE2003 PDA?

  I have a Toshiba SD - BT00P Bluetooth SDIO card.
  I would use in Yakumo DeltaX GPS device. This PDA has SD/SDIO/MMC taken and uses the system of Windows Mobile 2003.

  Also I would like to connect Yakumo DeltaX GPS for my Nokia 6230i device, using the SDIO Bluetooth in Toshiba SD-BT00P map.
  So I want to use internet on my PDA through the bluetooth card and the mobile phone.

  What I have to do work?

  I found some information here:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/Mitac

  The suitable for card Bluetooth stack v5.01C can download you here:
  http://APS2.toshiba-tro.de/Bluetooth/?page=download

• Optimization of display PDA - reporter update panel?

  Hello

  I'm working on a big project for the PDA application with Mobile Module 8.6 LV (which could be deployed on Pocket PC2003, THIS 5.0 and target Mobile 6 and touch) and I have a few problems with the updating of the display: to my controls & indicators when I want to put their property to visible or not (by changing regularly), I got sequential effect of blinking/flashing on every control & indicators and performance of the application decreases strongly which is very bad for one monitoring application.

  I wonder if it's possible with Mobule Mobile (or perhaps with Touch Panel Module) to postpone the update of the Panel (which we can do with LV on WinXP target) and if this action could increase my application performance?

  Hello

  I find a workaround to increase graphics performance and decrease the flashing effect (although it depends on the target - hardware & software configuration - the application is deployed).

  Indeed, by using a tab control might be a solution with an "empty" page and a "view page" who have all the graphical controls/indicators. Before setting the visible properties, switch on the 'empty' page and at the end of the return to the display page.

  Kind regards.

  Mathieu

• Drag-and-drop files from a PDA

  Hello

  I have a test tool automated radio (PCMCIA card) on a PDA at work (a DELL Axim). This benchmark to generate HTML reports.

  I have no the ability to control the PCMCIA device because I can't program under Windows CE and the manufacturer of test bench want gives its API.

  I want to get the HTML of PDA files in my application of CVI, I stopped to read the results.

  So I connected my PDA on my computer and tried cloth & drop its files to a panel CVI (code below):

  -It works when the files/folders dropped on the Panel are my computer or local network Explorer window

  -It works with files dragged out of the window of the Explorer of PDA (Computer\Mobile Device\My Pocket PC). Then the path written inside the Explorer is like "\Windows\StartUp".

  Why?

  It seems that no drag & event drop is created when I drop files from my PDA.

  Does anyone have an idea? A similar experience? Is it caused by "Microsoft ActiveSync"?

  One solution is to drag the PDA files on my local drive using Explorer. But such an simple operation could be avoided!

  Best regards

  Pascal

  The code is simple and instructions to help of the CVI:

  int CVICALLBACK PanelCallback(int panel, int event, void *callbackData, int eventData1, int eventData2)
  {
  char * ppc = NULL;
     
  switch (event)
  {
  case EVENT_FILESDROPPED:
  printf ("files placed on the Panel: \n");
  If {(eventData1)
  PPC = (char *) eventData1;
  While (* ppc) {}
  printf ("" selected file: %s\n ", * CPC");
  free (* CPC);
  * ppc = NULL;
  PPC ++;
  }
  }
  break;
  }
  return 0;
  }

  You can configure Active Sync to synchronize your Axim to your PC files, so whenever the Axim is connected to the PC it will transfer files from the Axim to the PC.

  Then use Lab Windows CVI to access these files directly from the directory on your PC.

• PDA and files are known

  Hello..

  I have a zip of the PDA files

  *.dll or something in the zip folder.

  It is written in C language.

  I need to communicate with the PDA, and labview by using a USB cable.

  is this possible? How could I go to try to do?

  where can I read more about such things?

  I don't know if I got this right, but if you have a DLL that communicates with the device, then you can simply use the function node call the library to operate through LabVIEW.

  Otherwise, if your OS PDA is Pocket PC 2003, Windows Mobile 5.0 or Windows Mobile 6.0, you can use the Module of LabVIEW Mobile to build and run applications on your PDA LabVIEW. It will be much easier

• Under .dll call of Mobile 6 PDA

  Hello

  I wish I could call a .dll in a SW developed on LabVIEW PDA and I have a problem with regard to the opening of This that me is provided by United Nations levels.

  FYI, I know that it is possible to make such an action (what we already inside of this application) but I want to know it is the necessary details about building the DLL.

  Indeed, should activate parameters specific to the level of the compiler (or other)?

  Pour info: the dll that does not work is generated Microsoft Visual C++ 4.0 integrated on an ARMv4 target (the PDA is ARMv5 TE normally backwards compatible)

  PS: question subsidiary-online is it possible under LabVIEW PDA call an EXE? (IE like what you can do in windows via the call to the command line).

  Thank you.

  Hello

  Calling external code (.exe or .dll) since a VI LabVIEW PDA is not as simple as for a classic VI.

  The two following privileges (and privileges which are mentioned) should be helpful to you:

  Launch an external program of LabVIEW Mobile or Application of Module Touch Panel
  http://digital.NI.com/public.nsf/allkb/8F811FFA7BACEC2486256FC5006DB821?OpenDocument

  Calling external Code in LabVIEW PDA and touch screen
  http://digital.NI.com/public.nsf/allkb/517300B49212795986256DDD00623FEE

  Kind regards

• LabVIEW for installation of PDA (Pocket PC 2003)

  
  

  Jeff,

  The fact that the PDA module setup tells you that 'no software will be installed"is because it is already installed. I think it could be a problem during the installation. You can try to uninstall the add-on PDA completely and try to reinstall. If the installer asks you where you want to install, make sure you select the LV 8.0 directory.

• I'm looking for a time sound real when system starts in a PDA?

  Hi all!

  I want to create a program that can be useful as a meter away. I have the PDA with microphone and speaker, so I can use it as sonar in the audible range.

  The problem is when I try to find the point in time when my acoustic impulse starts ringing. It is very important to know the exact time of the impulse starts as it affects the quality of recognition reflected pulse.

  If I use special functions such as 'Get System Time' or 'Ms timer value' I usually get incorrect results.

  First my program starts to save, and then after the start of the pulse of 100 ms, then after 200 ms program will stop recording and saves the data.

  I get RecStartTime, SndStartTime, so I can calculate how many data points in my record are before Pulse: (SndStartTime - RecStartTime) * 44, 1.

  But I always find start impulse in my test folder much later.

  So I don't think that "Mrs. timer value" can be used to know exactly the moment of time of sound starts (really starts).

  How can I avoid this problem?

  Thank you.

  I'm not really sure that a Microphone and a speaker are sufficiently precise a method to measure the distance.  Perhaps you should consider a hobby ultrasonic sensor.  I used a lot of these things in College and it worked very well.

• Privacy Code - Labview PDA

  
  

  Hi Juanjo, when you create a VI of PDA that calls a DLL, you must include the .c or .lib file that corresponds to the DLL. Perform the following steps to include the .c or .lib file. Select tools» build for PDA. The generate the PDA Application dialog. In the VIs list box, add the VI, any subVIs and the .lib file. If so, be sure to select the version of the .lib file that corresponds to the processor of your PDA device. Enter a path in the Destination Directory field, or leave the field empty to create the PDA VI in the same directory as the first level VI. Click the OK button. LabVIEW generates the PDA VI, a .prc file or the .exe file in the destination directory. On Pocket PC, when you download a PDA VI, calling a DLL to the PDA device, you must also download the DLL file for the PDA device. Follow these steps to download the DLL file on the device. "Select use ' Download Application. In the file dialog box that appears, select the DLL file. Click the OK button. LabVIEW download the DLL into the PDA device. You can watch all the related links: Release Notes LabVIEW PDA Module manual http://digital.ni.com/manuals.nsf/websearch/2D864AC24949C6FA86256D2C0067006C?OpenDocument&node=12222_US to use Module LabVIEW PDA http://digital.ni.com/manuals.nsf/websearch/948645EDBFA39E1786256D2C0066B381?OpenDocument&node=12222_US Atemptionally, Filipe Silva

• PDA, USB (Solar Express Card CF) host

  Not sure of the interest.  But I tried the new Solar Express Compact Flash USB host card (currently in an IPAQ 210 PDA running WinMobile 6).

  It worked like a charm with LabView PDA DAQbase code example and NI USB-6009 case.

  I really bought this for use in an accommodation not USB - PDA and will try in an Axim X50v.

  For the record the IPAQ 210 has a built-in feature, USB Host but initially good cables were not available, these are now available and the USB-6009 case work with them.  Unfortunately, I could only to work if the route cables through a USB-mini first hub.  This is not necessary with the card see

  In the CF and the native IPAQ USB accommodation, no additional power supply is required to run the 6009, although I still have to check the battery consumption.  The solar Express card comes with a cable USB Y-joint, which allows the additional power supply accessory on USB.  The card CF itself, I think, is limited to 200 my draw.

  See below links for the solar Express product.

  http://www.twin-paradox.com/SEPDA.html

  http://www.lightconecorp.net/blog/

  I think it works well for the price of $85.  And seems to work with many older PDA, which is good for the fans and those who, like me, with the 'old' unused who hang out.

  -Al

  Hi Al,.

  Thanks for all the Info!   Should certainly be of interest to a number of people!

  See you soon,.