IPCC Express as a domain member server.

Similar Questions

• Add Windows 2003 domain member server

  I have two windows server 2003 with service pack and the same version. I did a server to a domain controller. Now, I want to add another server as a member server. While trying to add, ther comes the error message if the user name or password is incorrect. I can add another PC to the domain with the same user name or password. Any suggestions

  Since your question deals with Windows 2003 domain, you will need to ask your question in the TechNet forum.
  Please click the link below for the correct URL:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  They will be better able to answer your question.

  Sincerely,

  Marilyn

• IPCC express 3.5 ensures cold

  I am planing to create a coldstandy by hard drive RAID mirroring IPCC express server, do I need another copy of the license for her file? Thank you

  With IPCC Express 3.5, the standby server cold is an exact copy of the IPCC Express primary server. Therefore, you will need to make a copy of the license file and load on the backup server during the installation. Because you create the good image miroring RAID. A copy of the license file will be automatically copied to.

  As the standby server cold is an exact copy of the primary, including the IP address, only the primary or standby mode can be active on the network at any time.

  I enclose a link to the design of IPCC Express 3.5 guide. Please refer to the call of the "Design for high availability Considerations" section. Page 34 describes exactly what it takes to configure the standby server cold.

  http://www.Cisco.com/application/PDF/en/us/guest/products/ps1846/C1028/cdccont_0900aecd800f351c.PDF

• How to control frequency, a member server, the time of synchronization to a domain?

  I have a domain with two servers and a domain controller or a member server.  Synchronization DC his time with an external source and provides the source of time for the field.  Generally all works as expected.  However, the time on the Member Server derives from the network.  "Time net/set/y" running manually on the member server corrects the Member Server, but it moves again.

  A solution would be to manually run a script on the Member Server, every hour to make sure that it is time remains synchronized. However is there a way to configure the Member Server so that it automatically keeps in sync with the network it's time?

  Environment: Server Win 2008 R2, s client pc Win 7

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Unable to preform IPCC Express configuration

  Does anyone know how to fix... After installing IPCC Express 3.5 2 - restart the server and the connection to perform the initial configuration - Web appadmin page gives the following error:

  You are not authorized to view this page

  You don't have permission to view this directory or page using the credentials you supplied.

  -----------------------------------------------------

  Please, try the following:

  Click the Refresh button to try again with different credentials.

  If you think you should be able to view this directory or page, please contact the Web site administrator by using the phone number or email address on the homepage of ipcc1.

  HTTP 401.1 - Unauthorized: the connection failed

  Internet Information Services

  I saw another post for this mistake, but not answers.

  It was a new installation, not an upgrade.

  Thank you!

  Hello

  I've seen this a few times... If you check your application/system/security event logs (I think, it's been a while) you will see a recorded error when you access the page.

  He referred to an account of user like IUSR_Guest or something like that.

  This account will be a member of the "Guests" local group (in local computer / management of users and groups) that if you look in your local security policy is denied certain rights to logon.

  If you delete the account in question of "Guest" and reboot it will begin to work...

  Aaron

• IPCC Express ver 3.5.3 OS Version?

  I have a client who is re-installation of their software of IPCC on a newer server. Can they install OS worm 2000.2.7 more service packs first, or what I need to install a version (2000.2.5) earlier, install IPCC Express 3.5.3 and then upgrade the operating system?

  Thank you

  Dave

  Hello

  You must install OS 2.7 more service packs first and then proceed with IPCC Express 3.5.3 installation.

  Also see the matrix of compatblity for OS versions supported for Ipcc Express.

  http://www.Cisco.com/univercd/CC/TD/doc/product/voice/sw_ap_to/crscomtx.PDF

  Concerning

  Srikanth

• CCM4.1 (2) sr1 with IPCC 3.5 Expr.Co-Res and IPCC Express 3.5

  Hallo,

  I installed sr1 CCM 4.1 (2) IPCC expr. 3.5 Res Co.

  Now I will connect Express.com (MCS7825) of the IPCC.

  Is it possible to run

  IPCC Express 3.5 Res Co and

  IPCC Express 3.5 (MCS7825)

  at the same time?

  Thanks in advance

  Concerning

  Hello

  You want to point living CRS and Standalone CRS on the same Cisco CallManager? If so, yes you certainly can point several CRS to CCM. But, you need a different configuration for each CRS Server profile. Profile repository can be shared between the two CRS servers.

  Concerning

  Yogi

• 4.0(5a) IPCC Express Services crash

  Hello

  After a stop and start of the IPCC Express servers (master/slave) 4.0(5a) 2, I found 2 red crosses on the enterprise desktop service and chat services to call in the web Center page coontrol master server indicating that services crashed. In the Services Menu, these 2 services are not started, I started the manually but nothing happens. I restart the engine then the server and nothing happens.

  Could someone help me?

  Here's how to start services in the CRS:

  http://www.Cisco.com/warp/public/78/ControlCenter.PDF

  I had similar problem and fixed in this way

• Authenticate on the Member Server external windowsdb

  I would like to know if someone was able to get the version of camera ACS to authenticate users on a Windows Member Server not a domain controller (no advertising).

  My bad, sorry.

  When you use the device, you must use the Remote Agent for Windows, the device then speak this agent to authenticate the users in its database SAM or AD. You need this because the unit does not in any domain, so it must pass the usernames/passwords on a Windows Server that can authenticate users.

  You can read about it here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacsapp/Raig/Rawi.htm

  Basically install it on the Member Server, and you should be good to go, it will automatically use the local SAM database to check names of user and password. It is actually easier to set up if you try to authenticate to a domain, since there is really nothing to install other than the agent for you.

• Restart of IPCC Express services

  Hi all

  IPCC Express there are some services that were arrested and in red. There is no option to restart these services of the IPCC. Anyone know if there is a way to restart these services correctly (they do not even if we restart the server)? Restart the services Windows does not live on the screen of the IPCC.

  Thank you.

  Is this application note relevant?

  http://www.Cisco.com/en/us/products/SW/custcosw/ps1846/products_tech_note09186a00808278d8.shtml

  http://www.Cisco.com/en/us/products/SW/custcosw/ps1846/products_tech_note09186a0080544954.shtml

  Please note the useful messages!

• IPCC Express, option for the appellants out of the queue and leave a message.

  We are running 4.0 (5) IPCC Express improved. I need to configure our current ICD script so that when the appellants are held in the queue, they can press 0, out of the queue and leave a voice message. The ICD script we use is an exact copy of the script icd.aef by default on the system, it has just been copied and renamed. My question is, what are the steps I need to use the script to enable this feature?

  Two options. Option 1: Use the IPCC completely to save messages and manage messages as you seem to did so. Option 2: Transfer the caller to your voicemail number pilot and use your voice mail system to record the message.

  Steps to Option 1:

  1 early on in the script, use the step to read the Contact information call to capture the called number and save it as a variable.

  2. use the step to get a string to allow the caller to press 0 to leave a message. On the Filter tab, allow only the key 0 be hurry.

  3. in the leg successful step to get a string of digits, add the following steps.

  a. contact Dequeue step.

  b. reading quick step that contains a prompt that asks the caller to record a message after the tone.

  c. step recording, which records the message saved in a Variable of type "Invite".

  d. use the Terminate step to end communication with the appellant (you can add a quick step before that game if you want to tell the caller that the message has been saved).

  e. at this point, you can either use writing document step to record voice messages in a folder on the server of the IPCC, or you can use a series of other steps to place a call to the queue and play the message the following agent that meets, or you can attach it to an email and send it it make the address email of your choice (or a combination).

  I have this HUGE warning. I had several problems with what I've been able to overcome, but it requires a bit of diligence.

  -L' registration step requires a termination character (# or *). If the caller hangs just straight up, the script returns an exception and drop dead. You can manage the 'contactinactiveexception' using a step on the Exception and have it go to a label that you can put it as the first step under the leg successful registration step. In this way, if the user hangs up, the script handles the exception by going directly to the successful step. You can clear the exception just after that.

  -You will also want to handle this exception before Terminate step. If the caller hangs up and you try to put an end to this contact when he is no longer active, the script will always die, and the remaining steps will not run.

  We use the option to place a call in the queue. In itself, this requires a lot of thinking to make sure that the script is not die when an exception occurs. I ended up putting some exceptions in place where if there is a problem and that the recorded message never makes it to an agent, a log file is stored on the server as well as messages stored in a .wav file. Then, an email is sent to the contractor with these attachments also.

  Thus, it is as effective as make you it. Try to keep things simple at first, and then build on that to improve the experience of the appellants.

  Steps for Option 2:

  1. use the step to get a string to allow the caller to press 0 to leave a message. On the Filter tab, allow only the key 0 be hurry.

  2. in the leg successful step to get a string of digits, add the following steps.

  a. contact Dequeue step.

  b. call no redirection to the number voicemail pilot.

  I have not used this option, so I can't say with certainty how Callmanager will handle this call. The voicemail system will need to see the call as transmitted from a number that has a voice mail on the system account. If this does not work, you can use a dummy CTI Port with a fake extension that is configured to transfer to voicemail, then the voicemail box must be associated with the wrong extension. If you use Cisco Unity, you will also be able to use a routing rule to force the IPCC calls to a particular mailbox. Call the Viewer from the unity tools depot allows you to see the way in which the appeal is made to the unit.

  I hope that helps you and that it is not too verbose.

• The domain name server ( DNS ) is not accessible

  Dear all,
  Need your big help here.
  Currently, I face below Internet connection problem at home.
  For this reason, I am really worried and I am not able to video chat with my family for the last days 6 :(
  Please help me
  In fact, I use a laptop provided the office with Microsoft Windows XP Professional/5.1.2600/SP3
  I use the same laptop at home too. Just do the below
  1 obtain an IP and DNS server address automatically
  2 disable the proxy in LAN setting
  For the last 3 months, it went well. Really not sure what happen last Thursday. The internet does not work at evnthough I am able to connect to the local network.
  I searched on the net (at the office) and followed all the steps below. But the problem still exists
  1. check all cables the same I replaced the new LAN cable
  2. downloaded and run WinsockFix
  3. reset WINSOCK entries
  4 release/renew IP address
  My details:
  Using the connection ETHERNET WIRWED
  1394 net adapt #2 - status (connected, firewalled)
  Intel(r) 82566MM Gigabit Network Connection - status (connected, firewalled)
  Broadcom 802.11a/b/g WLAN - status (connected, firewall)
  C:\Documents and Settings\scfb > IPCONFIG/ALL
  Windows IP configuration
  Name of the host...: San-kartcs
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: kr.standardchartered.com
  Ethernet wireless network connection card:
  State of the media...: Media disconnected
  ... Description: Broadcom 802.11a/b/g WLAN
  Physical address.... : 00-21-00-44-76-F8
  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. : kr.standardchartered.com
  ... Description: Intel(r) 82566MM Gigabit Network Connection
  Physical address.... : 00-1E-68-90-E3-00
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.200.100
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.200.254
  DHCP server...: 192.168.200.254
  DNS servers...: 168.126.63.1.
  Lease obtained...: Monday, December 12, 2011 21:49:36
  End of the lease...: Monday, December 12, 2011 22:49:36
  C:\Documents and Settings\scfb >
  While scnanning services "in Help and support center" from the start menu through "Use tools to view your computer information and diagnose problems" for the diagnosis of network
  . He FAILED in 'network adapters '.
  The Internet (DNS, Domain Name Server) service provider is not available
  Network cards
  DNSServerSearchOrder = 168.126.63.1 (FAILED)
  Ping 168.126.63.1 with 32 bytes of data:
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  Ping statistics for 168.126.63.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, average = 0ms
  Checked all services and seems to be well
  System event COM + (for WZC issues)-getting started
  Computer browser (browser of the computer will start when necessary)
  DHCP client - started automatically
  DNS Client automatically
  Network - started manual connections
  Network Location Awareness - started manual
  Remote procedure (RPC) call - started auto
  Server automatically
  TCP/IP Netbios helper-autostart
  Automatic configuration (XP wireless configuration) wireless
  Autoconfiguration WLAN (Vista wireless configurations) service
  Workstation - auto
  Please suggest me some ideas that will be really useful for me and my family:)

  Hello

  see this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/ICS-XP-Windows7-DNS-server-not-responding/0338b59a-2ffa-4070-BA2E-bd5d847fc8a7

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Subject ' test 2', account: ' express.cites.uiuc.edu (1) ', server: ' express - smtp.cites.uiuc.edu', Protocol: SMTP, server response: ' 250 HELP ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Error message in Windows Mail and Vista Premium where can receive the mail, but cannot send:
  Error message:
  Subject ' test 2', account: ' express.cites.uiuc.edu (1) ', server: ' express - smtp.cites.uiuc.edu', Protocol: SMTP, server response: ' 250 HELP ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where the people who specialize in complementary programs such as Windows Mail will be more than happy to help you with your problem.  This looks like a server or configuration problem but these people are the experts and you should consult them.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.