A3000 battery problem, charges to 99%, reduced to 15 per cent in a few minutes

Hello.

My A3000 ZTE has a battery problem. It charges quickly (in about 10 minutes) to 99%, and then when I unplug it, it would decrease 2% per minute (while the wifi / 3 g/bluetooth/auto rotation is turned off). Then it stops at 15%. It is very annoying because it worked fine yesterday. I bought the Tablet about 2 weeks ago, and the battery life was great until today.

What can I do?

Thanx

Thanks for the reply. I think I might have fixed for now.

I did the following, and now the battery works fine again:

First of all, I drained the battery, it took a few hours because he was stuck on 15%, but after awhile, it's just off. So I guess it was completely empty.

Then I kept away and loaded, it is only loaded up to 99%, but this time it took a lot longer than 10 minutes, which gave me hope. I turned it on, and the battery problem had disappeared. It works perfectly now.

Maybe these steps he has reinstalled the battery or something.

Thank you very much

Tags: Lenovo Tablets

Similar Questions

  • Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

    Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

    Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

  • Battery problem (fresh for a while then says: no charging current)

    I have dell inspiron n5110. I have upgraded to windows 10 pro... Everything was fine but since last week, it shows a battery problem. When I plug in the charger, the battery shows as 5-6 seconds of charging for and then it shows not charging. Again, I remove the cell phone charger and plug it in again and the same thing happens. Nothing changes on the displacement of the charger a little here and there... Only fees for 5-6 seconds when I plug works.

    When it stops to load, check the system to see if the AC adapter is not recognized (or shake gently the connector).  If the adapter displays unknown (F2 on startup to check) battery is not charging.  If the adapter is recognized, it is most likely a dead or dying battery.

  • Battery not charging if the A30 Satellite we

    I have the Toshiba Satellite A30 model, and lately, charger acted upward.
    At least, I think it is the charger.

    The problem is, the charger works fine when the laptop is turned off, the led lights to indicate that he is in charge, and when I turn on the laptop it is fully charged.
    But when the laptop is turned on, the charger does not work, so when im using it, the load is reduced slowly and I too keep turn it off to charge it back to the top.

    Its really annoying.
    Can anyone suggest what the problem and a possible solution?

    -Thank you.

    In my eyes it has nothing to do with the AC adapter, and I think that the adapter is ok.
    I think that your electronic books power is not okay maybe not a problem of motherboard or battery problem. Who knows without detail tests it's really hard to tell what's exactly wrong.

    I think that the battery needs to be checked, first using a new battery.
    If that does not solve the problem, then check the mobo should be necessary.

    Welcome them

  • IPhone battery problems 6 more after upgrading to ios 9.3.5

    Hi all

    I have an iphone 6 more that was impressive, without major problems (except a minor inconvenience to be sometimes does not respond to the touch which has been fixed by simply locking and unlocking the screen), until yesterday (it's happened since I bought the phone and with hindsight, I probably would have had it replaced). I updated my phone to the latest ios (I think it's ios 9.3.5) in the last week or two. Battery seemed to come down faster than usual, but I assumed that it was only due to the increased use or something.

    This brings me to yesterday. For the first time, I met problems with the battery. She went from 26%, all of a sudden at 4% (after already declining at a steady and reasonable rate). I saw it and quickly grabbed my charger, a little confused, but don't think much. I plugged it in and a minute later when I went to use the telephone, he had popped up more than 20%. So I unplugged, not want to charge the battery unnecessarily and he returned to gradually decrease again for a while, before falling sharply to 1%. For this reason, I plugged the phone and got to backup contacts and then saved the phone in order.

    Now, more details of the issue at hand... As it seems, the phone connects to the power, shows that he is in charge, but stands at 1%. The phone was working then only connected to food, but stops twice after disconnection for more than a few minutes. It seemed that the aircraft could stay on when it is connected to a computer, but if the power lost, required a connection to the socket directly to the power again. Later tested the phone and it seemed to hold a charge for at least half an hour sitting at 1%, still capable of using the torch etc. I then connected the power leaving to test today because it made it seem like he was holding the load, but does not properly display the percentage.

    Today... I took the phone off fresh and it lasted from 07:15 to 08:35, including the use of bluetooth, etc. Then it dies. Appears that there need to be plugged in, now it was plugged into outlet directly for 45 minutes and will not always to power on, but shows low battery without connecting cord icon, suggesting the cord is power. Phone will not power back.

    Problems of attempts... A reset (now the two main buttons for 10-20 seconds) tried without success. Reset all the settings. Tried 2 different authentic and compatible cables, used 2 power adapters different apple genuine, connected on 2 different computers.

    So basically, my guess is that the battery is the question, but it seemed strange to me that I had no problem before, then with the recent update and the way it has at times, costs. I don't really want to send it away not knowing what the problem is. I live in a rural area, so cannot attend an Apple store to ask for help. But if it is not the battery, I have no interest to spend $500 on a service for a phone I paid more than $1000 for purely and simply. Very disappointed that this phone had restored my faith in apple products and I was just telling on the eve of what past how happy I was with the phone and now it unfortunately.

    If the phone will again fuel or if I can get it to connect to my MacBook, I'll try a full factory reset as a last resort.

    I would like to know if anyone can help or if there is anything more I provide. I tried to be as detailed as possible.

    Kind regards

    Dominique

    Download the app battery life, which will tell you the status of the battery. Or take it to an Apple store where they can test, or call Apple hardware service and they can test it remotely.

  • No noise and cache-battery not charging - Satellite L755 - 1 CD PSK2YE-08T00YFR

    Hello

    I have two problems with my toshiba L755 - 1 CD PSK2YE-08T00YFR

    1: no sound

    When I try to grab the microphone into the mic port, the sound Manager, it freezes and any use of sound programmes it freezes like vlc, I turn off the audio Manager Windows, disconnect me and logging devices device when I clicked in the sound icon troubleshooting the problem and the noise come buck and when I again seized the microphone he not freeze the sound Manager , I disable the audio device in the Windows Device Manager, and I continue to work without sound for 30 min ~ 1 h, I reboot my pc to start windows (windows 7, I don't remember what happens may detect a new device), I click on the sound icon troubleshooting two devices (photos attached) I chose 1 and it doesn't solve the problem but the speakers work not , I'm going to the sound Manager I see a disconnected device (maybe my card sound, pictures attached) and two new devices (attached pictures) and I see some changes in the reliable data connector (attached photos), and in the tab input device, I see a disconnected device (maybe my card sound, pictures attached) and three new device a MIC webcam (photos attached).

    before this problem the webcam and microphone webcam not working do not (I think I have hardware problem - webcam with sound card).

    I restart my pc and I chose "load factory default settings" from the bios when windows start detects a new device (webcam) but the sound does not (webcam and microphone webcam works fine now).
    I have try to disable the webcam and sound card, enable the sound card, reboot, load default... linux live cd... nothing, no noise.

    I try to test the bios beep, it works, I can hear a sound signal.

    I don't know how to solve this problem
    I need noise, I miss her, I can't do anything without the sound, please help me

    Attachment 558 Attachment 559

    2: battery not charging

    My maybe of battery 30 ~ 40%, when I suspend my pc (for 8 ~ 11: completely discharged battery) I forgot to load it, the morning I plugged it in HQ, 2 hours the led remains red when I turn on my pc and check the battery level, I see only 4% (hip, accused), I remove and buck battery but does not support he notices 4%.
    How can I recharge my battery?

    I need fix the sound problem

  • Satellite P55W - C5204 Toshiba full RADIUS battery not charging

    Hello world

    Here's the problem...

    I have a toshiba P55w-C5204

    I leave the battery to one afternoon and the closed laptop
    When I tried to plug it in overnight was´t led current dc on (must be on to light red when you connect it and once charged white light, it should be), but the Red battery light indicated that I was using battery as it was the.

    Start the computer laptop no matter how long that I led the cable connected says battery fully charged, but if I unplug the cable dc current laptops matrices.

    I tried different procedures posted as stop disconnect the battery, start... .unistall ACPI driver from Device Manager, close, connect battery; and it doesn´t work.

    I also create a partition in the hard drive and install a new 10 windows and the problem is not changed.
    Help me please, I don't want to lose my Toshiba it works great despite this problem and I have can´t but another.
    Would it be the battery or the center cost (motherboard?)?

    I would like to know that it was a pilot or a bios Setup even a virus haha.

    Thanks to you all.
    Carlos P.

    Hello Carlos! I'm having the same problem. It started today. What is find a solution?

  • Satellite on Mini L9W - B - battery problems + hibernate option

    Hi there, first time poster/toshiba user here...

    So I got my mini click about 2 weeks ago... but from the first day the battery does not seem to charge directly.

    The Tablet battery would charge very well and would be up to a full 100%.

    Then the keyboard battery would start to load and show he's in charge, but he would stay only in this way, the percentage of the battery in the keyboard levels would not rise.

    The combined batteries would be a total percentage of 51% level and never more. And when I unplug the charger the battery of the Tablet were starting to ODS of. The keyboard battery would always show 0% if hooked up or not.

    I have updated BIOS 1.6, update, reinstalled windows to original settings and even tried the suggested continuous load here and also proposed by customer support 24 HR but nothing has changed.

    I'm a little at one end with that like as I'm living in Singapore, I can't send it sent to be repaired as it is not under warranty here (they don't even have hardware/software for her apparently) and it will cost me $150 just for them to watch.

    I was told by tech support when I discovered the problem BIOS 1.6 would solve the problem. But he didn't... and a little weird as they took update BIOS 1.6 a few days after the release of it.

    A little frustrated because I like really the laptop (perfect for on-the-go/travel).

    Another thing I would like to ask, is this model has a Hibernate option? I looked in the manual and it says that it is a he, but all my attempts to try to activate the Hibernate option gave no results.

    I hope someone can help me!

    I think the battery charge question could be linked to the BIOS and my experience an update of the BIOS (the next version should be v1.70) should solve the problems of charging the battery...

    I think that you should pay attention to setting notifications to date that appear in the software Toshiba Service Station... and I think you need to perform this update of the BIOS after releasing.

  • Satellite C50 - A - 1 7 - battery stopped charging

    My C50 is a battery problem. A few weeks, it stopped charging. He began to load (as seen on the windows startup icon) slowly to 61% then zipped to 100%. But since then, the computer does not work on battery power. The charging light does not illuminate (, but has then before). Because all intends and purposes, it seems that there is no battery present, except that the software (windows and toshiba help stuff) insists it is a fully charged battery.

    Now, it's probably a defective battery or connector, but to avoid going to the shop unnecessarily, I would check if there is an update of the bios available. Since it is a relatively new, maybe not, but the toshiba site is not the clearest. Anyway I couldn't find any update of the bios on the pages for Satellite C50 - A - 1 7.
    My bios is currently 1.20 with EC version 1.00

    TNX

    To be honest I don't think that the BIOS update can be the solution for this. Anyway, you can check what version of BIOS is available on the download page for BIOS - http://www.toshiba.eu/innovation/download_bios.jsp

    I'm afraid, you must contact the nearest Toshiba service Mr. they have special tools and can check the operation of the equipment.

  • "Erase content and settings" help battery problems?

    Battery life of my iPhone of 6 has problems. All of a sudden, the battery started to die very quickly. Sometimes my iPhone at 30% and I have to keep it on the charger for most of the day. Will help to "erase all content and settings '?

    If some app is the origin of the battery problem, then the clear operation will help, because it gets rid of all applications.  If its still bad after the operation to clear and without restoring from a backup, then it's a hardware problem.

  • Satellite P300-172 battery problems

    Hello.

    Hope you all had a good Christmas and can hopefully help out me.

    I bought a laptop P300-172 awhile back.
    Now, even after the sinking of a large number of power settings, the battery life was poor.

    So I ordered a replacement from ebay (part 3rd battery) the battery is identical to the Toshiba battery in everyway of course the only difference is there was not an a toshiba.

    in any case, when the battery arrived I plugged it and the battery LED came on to show that he was charging, when I booted up my laptop (with vista) windows showed that there was no battery connected, I thought strange. But I did back and let it load, after an hour or two charging orange led started flashing which it never did.

    Still, I booted up vista and windows showed there is no battery connected. I have contcated the seller and assumes that the battery was faulty, as chance would have, he repaid the article and I went back to the normal toshiba battery.

    I had another battery, ordered through work and that is identical in every way, once again, except that it was another 3rd party battery and which does exactly the same thing.

    Can anyone help?

    I've updated to the latest version of the BIOS (3.9) and have tried many steps as leaving the laptop without the battery for 30 minutes and then insert the battery. update the bios.

    Well that's about all I can think and have read through the forums.

    I appreciate may give any information you guys! Sorry for the long message.

    If I were you I wouldn't assume more battery problems and return the phone to the place of purchase, if you can.

    The problem is out of your control, as you have tried multiple batteries. Just give him place of purchase to watch. Then less grief for you.

    Good luck.

  • Satellite M70-340 battery not charging

    I had a problem with a Toshiba Satellite M70 - 340 portable hard drive, but everything else worked perfectly, and it was possible to operate on battery power. So I sent it to a maintenance shop where they changed the hard drive and installed a fresh new copy of Windows XP. Once I got it I found that I am not able to turn it back on, except when it is connected to electricity and after a little or looking around, I found out that the battery is not.

    In addition to this, when I plug first laptop for electricity while it is turned off, the yellow/orange battery LED lights only for like 3 seconds. And even if it is activated, the led is still off, and the the battery icon on the status bar indicates that the laptop works on AC and does not say that the battery charge, he repeats to me 1%.

    I also tried leaving it plugged to AC while it is off, hoping he can recharge, but I bite the dust.

    So what would cause the battery won't charge if from one day to another (and just by changing the HARD drive and install a fresh copy of windows XP), the battery has stopped working?

    And I was just wondering is an update of the BIOS or your driver fix? I want to say a battery need some kind of driver or software to run?

    Thank you

    Hello Zaher

    I have Satellite M70-159 and issue described is not known to me. If you are sure that this strange issue started after get it back you with 100% service I recommend you speak again with technicians.

    Behavior described is not really normal. As much I know BIOS update or drivers have no influence on it and to me it sounds like a malfunction of the equipment.

    BTW: remove the battery, connect the laptop to the power adapter and start Notepad. When the operating system starts correctly, wait a few minutes and put the battery in the laptop. Please let know us what happens when you do this.

  • Portege R500 - battery problems

    Hello

    I have problems with my battery. The battery seems to load OK, but sometimes recently, when I wake the PC, the light flashes orange and nothing seems to work. If I remove the battery and put back again, it starts again OK and the battery says it is fully charged.

    Any ideas?

    Concerning

    Angus Walker

    Hi Angus Walker,

    Why do you think that the problem is related to the battery?

    Awaken the PC way, it is in mode 'sleep'?
    If so, I think that it another problem that might be a software based on s. I average if you remove the battery and put it again, and then the computer starts the battery is charged, your computer is able to boot with the battery only, so it seems to be ok.

    In your ad, I can t find information on your operating system you are using?

    I would also try to load the default settings in the BIOS and test again. Also, make sure that all Windows updates are installed if you are using Windows as your OS ;)

  • Re: Satellite T - battery problems

    My laptop battery will not charge when connected to the power terminal. I also have to remove the battery to turn on the laptop, it turns with the battery connected.

    Can someone give me some advice or do I have to return the battery?

    Hello

    The warranty is valid?
    If so, then get in touch with a local ASP because I m not quite sure if it s only a battery problem.

    Usually if the battery would be affected so you should always be able to turn on the unit.
    I think there could be something wrong that should be checked by an ASP.

    Good luck

  • TECRA 9100 battery problem

    Similar experiences to mine, please?

    After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

    At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

    Hardware malfunction

    Call your provider of support material

    NMI: channel check / IOCHK

    The system stopped *.

    A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

    Yet once which seems to indicate a battery problem, I guess?

    Has anyone else had a similar experience?

    Post edited by: Gary S Cooper

    Hello

    Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

    On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

    Good bye

Maybe you are looking for

  • Table of ACPI broken on Tecra W50-A-104

    Hello support team, Looks like the Table of ACPI in the BIOS is broken. When you install the nvidia driver, the system complains about missing features. Analysis/execution of the method does not have \_SB_. PCI0. PEGP. VGA_._ROMCannot copy vbios for

  • HP G62: Enter administrator or power on password

  • T510 540 m

    For $150. This can be legitimate even a laptop? Going to use for general use. Navigation, a lot of typing, listen to CD after their RIP to HD. Will download the 8 GB RAM and swap the HD for one SSD. It has Windows 7 and is a 1st gen i5. I could wait

  • N6350 Scanner will not scan button on the front panel

    I have configured the HP scanning software and added a shortcut. It will scan from the HP Scanner Software, but no analysis NOT of the scanner. The name of the user's the shortcut there. When I hit the button, is said "Please wait" and the Green LED

  • Documentation on a Labview VI

    Hello I'm doing some documentation/information on the VI I created. I created a VI that controls a bath of hot water by the use of a wave of fishing and watching the influx of Air mass flow controllers. I am about to leave my current job of laborator