iPhone 6 variations of volume when using headphones

Similar Questions

• I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I assume that the Air Drop is enabled in the iPhone and that your devices are regarded as Favorites?

• MacBook randomly landed volume when the headphones are connected.

  Hey,.

  There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

  My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

  Please try resetting the memory NVRAM and SMC.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

• Charge the iphone 7 when using headphones

  Am I missing something, or if I get the iphone 7 this means I can no longer listen to music on my headphones and charge the phone at the same time?

  Hello

  Solutions for charging your iPhone using wired headphones also include:

  • IPhone dock
    • If your headphones have a 3.5 mm jack plug, you can charge your iPhone and listen to music at the same time.
    • http://www.Apple.com/shop/product/MNN62AM/A/iPhone-lightning-dock-black?FNODE=97
  • Belkin Audio Lightning + load RockStar™ allows you to charge your iPhone, just as listening to music through a wired headset. It supports the use of:
    • The EarPods provided (or other headphones with a connector of Lightning).
    • Headphones with a 3.5 mm jack plug, when connected through the lightning to 3.5 mm Jack adapter (that comes with the iPhone).
    • http://www.Belkin.com/us/F8J198-Belkin/p/P-F8J198/

  Other accessories can follow in time Apple or third-party manufacturers.

  When purchasing an accessory for your iPhone, make sure that it is a true Apple product, or that - as Belkin product - it has been certified as made for iPhone (IFM).

• No sound when using headphones.

  Hello

  I have a Dell Laptop Inspiron N3010 Windows7 running.

  Audio works fine with the speakers, but when I insert the headphone jack I can't hear any sound with headphones. (The Mute speakers as expected.)

  I tried 3 different helmets, I don't think that the problem is with them.

  Does anyone know how to fix this?

  Tzachi

  Hi Tzachi,

  Please check the selected audio device as ejn63 said. Also, try to update the audio drivers and check the functionality. Here are the steps:

  • Click on the link: http://dell.to/123NfbT
  • Download the drivers and follow the prompts on the screen to install it.

  Check whether the problem is resolved. If the problem persists, update THE system BIOS. Here are the steps:

  • Click on the link: http://dell.to/1bOmBFK
  • Download the BIOS and follow the prompts on the screen to install it.

  Note: Make sure that the power adapter is connected and the battery is charged at 10% or more to update the BIOS. Furthermore, disconnect any external devices before the BIOS update. All programs should be closed and saved documents.

  I hope this helps. Answer please if you have any questions.

• weird noise on all new alien ware 17 when using headphones

  I just got my computer a few days ago and whenever I use my headphones there is a strange noise that happens from time to time. I tried several different headphones but it happens on each one that is my sound Manager recon blaster 3di

  It seems that the last updated java fixed this problem

• Static in speakers when using Skype

  I have a PC laptop HP Envy Touchsmart IS-j052nr, running Windows 8.1.  When I use Skype, either through headphones or the speakers, I have problems from parasites.  It sounds clear when I speak and when the person at the other end is speaking, but if the person on the other end does not speak for several minutes, then the static method noise becomes stronger and stronger (like a huge storm of rain falling at the hearing) until the other person makes a new sound.  The other person can also hear static.

  Is there a new driver, I can download to fix this problem?  When I scanned my computer on the support site there is no audio driver I was missing.

  Thank you!

  Hello SCLC.

  Welcome to the Forums of HP Support! I understand when you use Skype on your HP Envy Touchsmart j052nr IS running Windows 8.1 you hear static, whether you use headphones or speakers. Now you don't hear static noises when using Skype, or when using headphones or require sound from speakers?

  After some research on the Skype Support Forums, I've seen a few recommendations that I would like you to try to see if that reduces / removes this annoying static noise. Please follow the steps listed below:

  1 sign in to Skype

  2. go in Tooks > Options > General > Audio settings

  3 uncheck automatically adjust to the title of chapters of Microphone and speakers

  4. adjust the volume to your liking

  5 save and restart Skype

  If you are still having static noise, I wish that you continue here: Skype Audio issues troubleshooting

  Please reply back with the information requested, if the static noises are still there and it is only when you are using Skype, I recommend to go to the Page of Support of Skype as they would be able to help you.

  I'll watch for your reply.

  Source: www.skype.com/en

  Thank you

• No sound when using a headset? 7 7 iPhone

  I've recently set to upgrade to an iPhone 7 latest updates installed and have clearly wonderful audio using speaker phones, but as soon as the headphones are plugged, theres little or nothing then vanish its pointless. The headphone volume is at full throttle and phone recognizes they are there, and today he said could be a problem in my iTunes account - where are the settings in iTunes to study and does anyone know a way to fix the inaudible? Help greatly appreciated!

  Hello and welcome to Apple support communities, Iarns82.

  If I understand your message to the right, when you use headphones with your new iPhone 7, there is no sound or the sound is very low. I use headphones with my own iPhone almost everyday, so I can certainly understand how it is important to get the best possible sound for the steps. I'm very happy to help you with this.

  The first thing that I recommend you do is try the sound with another pair of headphones. This will help determine if there is a problem with your headphones, or if the problem is with the iPhone itself. If the same sound problem occurs with a second pair of headphones, let's check some settings of your phone:
  

  1. Open your application settings.
  2. Select music.
  3. Enable the control of sound. When activated, your iPhone will detect when you play naturally music has low volumes and he will adjust accordingly.
  4. Check if the Volume limit is on. If this is the case, drag completely to the right to turn it off.

  Then, test your sound using your headset. If the problem persists, follow the steps If your headphones do not work with your iPhone, iPad, or iPod touch, specifically, this section:

  Look for debris, damage or loose connections

  1. Look for debris in making headphones for your iPhone, iPad or iPod touch.
  2. Check your cable to earphone, connector, remote control and headphones for the damage such as wear or breakage.
  3. Search for debris on STS on each earpiece. To remove debris, gently brush all openings with a small brush bristle that is clean and dry.
  4. Firmly plug your headphones in. If your iOS device has a case, remove the case to get a good contact.

  After you have gone through these steps, test again your helmet.

  Thank you for using communities of Apple Support.

  Take care.

• Sound seems to be decreasing after that I have used headphones, or turned down the volume.

  I have a HP G62 and he had a GOOD volume, but after that I have to use headphones or turn down the volume, he seems to do something for the volume and when I want to play sound after headphones are disabled you can hardly hear it.
  I turned the volume up on top of everything I can find, but it is so weak, it is not worth listening to!

  Hello

  1. What is the operating system installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article, and check whether the problem is resolved or not.

  No sound in Windows (Windows 7)

  Note: this also applies to Windows Vista and Windows XP

  Hope that helps.

• IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

  IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

  Hello

  Apple has not yet announced a.

  You can submit your comments and suggestions to Apple here:

  https://www.Apple.com/feedback/iPhone.html

• How to reduce the volume of alerts in FF when using webmail without lowering the system volume (Mac)?

  I use Mac OS 10.6.8.
  When I access my webmail via Firefox, I get a Twitter hard whenever I have send or receive a new email.
  I contacted my ISP (Optimum) and they said tell Firefox to my computer to make the sound. They say that they have no control over it.
  I tried to reduce the volume of alerts in my system prefs, but it has not affected the volume of FF.

  How reduce or disable volume in FF when using webmail without lowering system volume?

  Thank you!!! The 'sound' button off in their preferences. Fixed. (It was so freakin ' fort!)

  I, in turn, chatted with Service to customer of Optimum and tells them that they must tell their supervisor to better educate their own service to the customer, instead of passing the ball. We'll see.

  Let contributors Mozilla smart to not return the ball.

• iMessage on macbook pro to open when using on iPhone

  iMessage shows in my dock as soon as it will be open on my iPhone, and then goes away when I close the iMessage on my phone or lock my phone. Is it possible to stop iMessage show in my dock like that?

  Disable SMS

  To disable the SMS function, simply turn off Text Messages Forwarding under Messages in the settings (from your iPhone).

  It is the continuity - read this article - you can find other pointers to good

  http://www.Pocket-lint.com/news/131449-why-s-my-Mac-taking-my-iPhone-calls-how-t o-turn-off-apple-continuity

• Satellite A110: no sound when using a USB Logitech headset

  Last week, after that I installed a new modem MTN (HUAWEI Mobile Connect - 3G modem) on the internet in the northeastern part of the DR Congo I can't use my logitec headset not so the slides to no volume speaker volume slider.

  When I drag it upward with my mouse, it works, but don't stay upward. Everything I tried didn't, and I found no answer anywhere on the net.

  Help, please.

  Hello sisi

  5th you does not offer enough information on this subject. It will be interesting to know what headphones from Logitech, you exactly. At this volume control panel clean helmet on the cable.

  To be honest, it is not easy to provide any reasonable and direct solution to this.
  Let the volume slider and try to adjust the volume level using the volume settings in the Volume mixer.

• Is there a delay in the signal when using Bluetooth on any iDevice and, in particular, on an iPad Pro?

  I am using Bluetooth involved in the use of music made a software with sounds of digital instruments using a musical keyboard hardware connected via the USB cable to Lightning to play sounds from the app on my iPad Pro.

  When I try to use a Bluetooth speaker source, there's a 1-2 second delay when I play a chord in the app and when the sound is played through the Bluetooth speaker.

  This delay IS NOT the case when I use just the iPad Pro speaker on when I am attaching some small travel speakers to the headphone jack of my iPad.

  Only when I try to use my Bluetooth speakers sounds better.

  I use a keyboard master Korg MicroKey Air uses the USB port play their own Korg music make its app module.

  Someone who makes music on an iPad with this problem at all?

  Is this a problem question Bluetooth and/or iOS?

  My iPad Pro isn't very strong using these apps do and travel speakers I use plugged into the headset jack music are a little better on the volume, but tend to deform when I try to increase the overall volume level.

  I intend to put this issue on the web forums for Korg, but want some answers from anyone who has been playing and recording music on their iPad using an external keyboard to play and record music in an app to do the music.

  Also, (and I intend to ask this in the GarageBand for iOS forums) can the iOS version of Garageband output sound on a Bluetooth speaker and quietly delay, too, that I can not get the iOS version of GarageBand to sound output via Bluetooth to a Bluetooth speaker.

  Hi, MichelPM

  According to the used speaker, he will always be * some * delay when using Bluetooth to stream audio from an iOS device (or practically any device BT also) through a Bluetooth speaker. I have a Bluetooth speakers system cheaper that I use with my iPad mini 4... I pretty much use it only to listen to sound. If I try and use it for Pinball iOS games I play, there is a delay of environ.5 second anywhere, I'm the speaker. Exactly same phenomenon occurs with the keyclicks when you type it on the iPad keyboard... 5 second delay & even with some applications of synthesizer iOS that I use (Animoog & Arturia iSEM). I think it's just the nature of the beast of Bluetooth.

  Higher quality speakers would be better, but I'm not spending more money to find out.

  If you want an immediate response with zero real audio keypress delay, I fear, the only way to do this is to use a wired speaker.

• How to use headphones and speakers at the same time

  I want to use headphones at the same time that I use the speakers.

  I am hard of hearing and need the LOUD volume. When others are watching a film, projected on HDTV, they won't let me turn the volume up to where I need it, which is why, headphones and speakers at the same time.

  I use Windows 7, I want to stick with Windows 7, so I want a Windows 7 solution.

  If there is no solution for Windows 7 and there is a solution using Windows 10, then and then only, I will be upgrading to Windows 10.

  Using headphones and speakers was possible under Windows XP. I think that a kid at Microsoft, with a regular audience, thought this feature was redundant and removed. Large.

  Macs will play through the headphones and speakers, so maybe it's time to buy a Mac!

  Hi Bob,

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to use headphones and speakers at the same time on your Windows 7 computer. I will certainly help you get this fixed number.

  I suggest you check the suggestions contained in below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/headphones-speakers-at-the-same-time/7ed31bcf-3762-430D-9c9f-e6967d670d0e

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.