iPhone and Secure Wireless - PEAP

Similar Questions

• How to iphone and ipad detectable with the Mac for wireless and Bluetooth

  iMac is 21.5-in. version 10.11.5; iPhone is 5 c, version 9.3.2. iPad is version 9.3.2. Each device has the ability to drop and it works between iPhone and iPad, but no device is discoverable to the iMac.  I use the dongle Broadband Pendo, connected on router NetcommWireless. The ipad name on the screen of the computer and the computer name displays on the screen of the ipad, but they co not connect. The iPhone name does not appear on the computer screen.

  Go to System Preferences > Privacy & Security > firewall. Turn off the firewall, then restart. The firewall software (if activated) blocks Airdrop.

  Barry

• I upgraded my iPhone and iPad to IOS 9.2. Now my Seagate Wireless Plus can't access my photos on my iPad or iPhone. Someone at - it an answer to this?

  I upgraded my iPhone and iPad to IOS 9.2. Now my Seagate Wireless Plus can't access my photos on my iPad or iPhone. Someone at - it an answer to this? I contacted Seagate and after a session of 2 hours troubleshooting I was told that my Seagate Wireless search CAMERAROLL. Now the photos does not use the term... He uses all of them. So Seagate Media cannot access the photos to download.

  Have you tried to create a folder with the same name and put some pictures in there and see if it works now?

  R

• Should I install a security on my iPhone and iPad application?

  My home network was infected by koobface.  Fortunately, Safari locked my iPad and told me to contact Apple support.  It was discovered that my wi - fi has been infected.  Is there antivirus protection, should I install on my iPhone and iPad?

  N ° there is no knowledge of viruses that can affect an iOS device. Everything you put on to try to ensure safety 'extra' will only bog down your performance and likely to cause problems with your device. Just be smart about where and how you browse the internet, what links you click on, what did you download and you will have no problems.

  See you soon,.

  GB

• No reliable WiFi for iPhone and iPad

  I have an Airport Express, Time Capsule with two extensions Express airport and once every 3 days I have to power cycle to get my iPad and iPhone to be able to use the Wifi.  I-devices connect and show they have Wifi signal but they cannot transmit data. The airport on the iPhone and iPad App show Extenders but do not see the time Capsule (which provides the route to the internet) when this symptom occurs. I have also 2 MacBooks using the airport for Wifi and they do not seem to be affected. Once I have power cycle the Wifi Time Capsule works again for up to 3 days and then I'm right back where I started.

  I am really frustrated with this, if anyone has any ideas of what I can do to fix this, I'd love to hear them. -Like to me, I may need to consider a new airport or an alternative companies Wifi router to get the reliability, I need.

  Time Capsule is currently running firmware 7.7.7

  Express Extenders are 7.6.7

  The two iPhones are 6 s on 10 iOS version

  iPad Pro is iOS 10

  The two MacBook with OS X 10.11.6

  FWIW, there were a few post here associated with iOS 10 and network connectivity. Nothing substantial, but just letting you know. However, one question would be: do you have this start happening after the upgrade of your iOS devices? It also affects your so non - iOS devices?

  That said, let's try to exclude your current network configuration. You mentioned that you have Time Capsule (TC) and extend its Wi - Fi network with two base station AirPort Express (AX). Is the link between the AXs and the TC wired or wireless?

  What are the exact models of each of your base stations? Where the AXs extending regarding the TC?

• My iPhone and iPad are not visible to my Macbook Pro in parachuting, but they are visible to the other... How can I solve this problem?

  How can I fix?  iPhone and iPad are visible to each other in parachute drop but they does not see my Macbook Pro.

  Greetings brsm1990,

  Thank you for using communities Support from Apple!

  I understand that your iOS devices can see each other with the help of parachuting, but your Mac does not see them. To begin troubleshooting, I suggest you read the information in the following article.

  Use AirDrop to send the contents of your Mac - Apple Support

  Tips for sending items

  If you do not see the recipient in the AirDrop window or sheet:

  • Make sure that the two devices have on AirDrop and are less than 30 feet (9 meters) on the other.
  • If you send to an iPhone, iPad or iPod touch:
    • Your Mac must be a 2012 model or newer with OS X Yosemite or later.
    • The iOS device must use iOS 7 or later and have Personal Hotspot disabled in settings > cellular.
  • If you send a Mac:
    • If the receiver Mac uses OS X Mavericks, Cougar or Lion, then open a window AirDrop: choose go > AirDrop in the menu in the Finder bar.
    • If the receiver Mac is a 2012 model or, click "Don't see you looking?" in the drop window or the sharing of the sending of the Mac spreadsheet. Then click on "Search for an older Mac."
    • Know if the Mac has "block all incoming connections" enabled in the security and privacy preferences. A Mac does not receive items using AirDrop if this setting is enabled.
  • If AirDrop on the receiving device is set up to receive points of contacts only, make sure that the two devices are connected to iCloud. Also make sure the associated e-mail address or phone number to your identifier Apple is in the Contacts application on the receiving device.

  

  Release system requirements

  Send items to an iPhone, iPad or iPod touch, or to receive these devices, you need a 2012 model or later Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).

  To send items to another Mac, you must:

  • MacBook Pro (Late 2008) or later, excluding the MacBook Pro (17 inch, late 2008)
  • MacBook Air (late 2010) or later version
  • MacBook (Late 2008) or later, excluding the white MacBook (Late 2008)
  • iMac (early 2009) or later version
  • Mac Mini (mid-2010) or later version
  • Mac Pro (early 2009 with AirPort Extreme card or mid-2010)

  Learn how to identify your model of MacBook, MacBook Pro, MacBook Air, iMac, Mac minior Mac Pro.

  I know you said that your Mac does not see your iOS devices, but your iOS devices sees the Mac?

  Best!

• Can you stereo audio input in an iPhone and listen in real-time?

  Well, it's rather a strange question, so I will explain briefly the background... I am a user of the hearing and I'm considering the purchase of hearing aids new fantasies that are capable of connecting to an iPhone (wireless via THE Bluetooth); This allows several things, including the ability to listen to the audio from the phone.

  I currently don't own an iPhone but wonder if buying one, as well as these hearing aids (Starkey Halo 2, if you're curious) might be a good option.

  The thing that is currently my attention is: is there a way that I could use this configuration of audio stream of (for example), a TV or a stereo directly to hearing aids? To do this I would need power audio * in * the iPhone and do share the same audio output for hearing aids. The audio input should be high enough quality and (especially!) in stereo, not mono; so we couldn't use the 3.5 mm jack. Ideally, I'd like to audio input via a digital SPDIF (PCM stereo) connection; If this is not possible then via a signal analog stereo level line (preferably via XLR, but failing that would make a jack or RCA). Another important thing is that (except what is inevitable due to the nature of the Bluetooth connection), this should be pretty low latency.

  I guess I would need some kind of accessory for this and perhaps also additional software.

  How possible it seems?

  You might want to repost on in the forum "hearing". There seems to be a number of users of Halo.

  Hearing

• My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

  Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

  Internet connection works for my IPhone and MacBook.

  Hello

  Go to settings resets the network settings on iPad.

  After reset, enter your key wireless router.

  See you soon

  Brian

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• Printercontrol App impossible to find HP 6500 e709n printer on iPhone and iPad

  I have a HP 6500 e709n connected to a wireless router.  I installed the HP eprint app on my iPhone and iPad, and both work as expected.  I then installed the Printercontrol app on the iPad and the iPhone, but can't find the printer.  I get a continuous, the message of the printer search.

  I tried to unplug the router, but that didn t help.  I have the latest drivers installed on the printer and the router working properly. Also tried to uninstall and reinstall applications repeatedly, no help.

  Any suggestions on why the iPad and the iPhone can, t locate the printer?

  Hello

  Just to let you know, the information on the website of HP was false because I figured well indeed.

  As you can find on the document, it was corrected and now it list the correct information for the E709:

  http://support.HP.com/us-en/document/c02814760

  Kind regards

  Shlomi

• cannot print on IPad but will be printed on IPhone and laptop computer HP

  Use a HP LazerJet 200 colorMFP M276nw == have wifi wireless system
  cannot print on IPad but will be printed on IPhone and laptop computer HP
  How can I get the Ipad for printing follow-up after it shows the document sent to the printer?

  Hi ddavid1,

  Welcome to the Forums of HP's Support. I believe that when you send a print job from your iPad to your color Laserjet 200 printer MFP M276nw, it does print ever.

  I have included the Apple Mobile Devices (AirPrint): Document Print or is stuck in the print queue document. I know that you are able to print from your iPhone, but please start with a Solution in the document. I have also included the document to print from an Apple device . In the section 'With Apple's AirPrint printing', he has advice on using AirPrint and what it takes.

• IBM ThinkPad T42 would not connect to my home network secure wireless

  Configuration IP of Windows __An internal error has occurred: a device attached to the system is not functioning. __Please contact support services technical microsoft for more help.

  Others have had a similar problem, but I tried the solutions that have worked for them, without success.

  All of a sudden, my IBM ThinkPad T42 wouldn't connect to my home network (WPA2-PSK) secure wireless.  It would be either (1) stay in a constant state of "acquiring network address" or (2) do not recognize networks wireless in the range.  Sometimes, it would connect to a nearby unsecured network, but the network would still not appear in the list of available wireless networks.  So I tried to connect directly to the ethernet, which also did not work.  I then ran the ipconfig/all command at the command prompt and got the message:

  Windows IP configuration
  An internal error has occurred: a device attached to the system is not functioning.
  Contact support services technical microsoft for more help.
  Additional information: unknown media status code.

  So, I went to Microsoft Product Support Services, which does not seem to offer all the solutions.  I searched this error online and found several similar problems - some users had problems with viruses.  Some users had winsock2 corruption, and some recommended to reinstall the drivers for my network cards.  I'm computer literate, but not a computer Wizard, so I was able to follow their instructions for checking the winsock2 corruption (I think), and I think it's very good.  I did a complete scan of symantec, but who came with nothing.  I downloaded the drivers for my network cards which are: Wireless - 11 a/b/g Wireless LAN Mini PCI Adapter, ethernet - connection of a Mobile Intel (r) PRO/1000 MT and was able to update my wireless driver, but not the driver ethernet.  The latter Assistant said we "could not find a better match for your hardware than the software currently installed".  I had wireless internet to work for a few hours last night, even if I still have the same error message when I run ipconfig/all.  I started my computer this morning, and the same problem again - constantly says "address of network acquisition" even if no wireless networks are appearing on the list.  Also, I tried the system restore to see if I could go back before the problem started, but after that I tried several dates, System Restore has still not successful - it wouldn't work again.

  So now, I have my computer in safe mode, and it is connected to the wireless internet, even if the ipconfig/all command still gives the same message, and I am running symantec again to see if I can find something!

  Please help me!  If you think that I may have missed something with the winsock2 or installing drivers, or if there is something I could not find on the internet, please let me know!  I'll try anything.

  Note: I have Windows XP Professional Service Pack 3.
  Network card drivers, I'm running are:
  Wireless: Date - 02/05/2007, Version 4.1.2.156, provider - Atheros
  Ethernet: Date - 24/10/2006, Version 8.7.9.0, provider - Intel

  Thank you!

  Update: when I disable the Intel PRO/1000 MT driver, I can run ipconfig/all with success.  Then imagine it's something to do with this adapter or the driver.  Any ideas?

  OK, so here is what I did to solve this problem.

  I've updated to the latest version of the IBM BIOS

  Then get the WLAN driver from the manufacturer, NOT IBM, NOT Windows Update. Depending on your card, it will be Cisco or Intel.

  I can not stress enough that updates to IBM and Windows update does not work and I lost a lot of time. However, once downloaded directly from the manufacturer (new version) worked flawlessly!

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Want 5640: HP Envy 5640 and Direct wireless

  My printer HP Envy 5640 is able to connect using direct (http://www8.hp.com/ca/en/campaigns/wireless-printing-center/wireless-direct.html) wireless or not?

  When I print the HP Network Configuration page, I see "Wi - Fi Direct '; This topic, 'Status' and 'Security' are both 'On '.

  The results of the Test network wireless, I see under 'Network', he says 'FAIL' to "Network Name (SSID) Found".

  I try to use the University to my home wireless connection and don't have available router information...

  Will it end with a USB key to connect my computer to the printer?

  I think back to this printer as this question has been very frustrating.

  If you can help, let me know. Thank you so much in advance!

  Read the manual for this printer supports wireless Direct. Just read page 59 of the User Guide to set up. However, you have the choice to your computer. Connect to your Wifi to Internet OR connect to the printer via the wireless Direct, not both. One or the other. We suggest that you use a USB cable.

• "The service cannot accept control at this moment a message" and the wireless Wlan card stopped working

  My computer is showing a wireless card WLAN stopped and on numerous programs, including the firewall and security, as well as other system error "the service cannot accept a message of control at the moment."  I even tried downloading new spyware thinking that something was inside my computer but cannot download anything.  What can I do?

  Hi irishswede,

  Thank you for visiting the Microsoft Windows Vista Community.  Here are the steps that include the error message you stated in your troubleshooting post.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.