iPhone in recovery after mode put 9.3.5 up-to-date.

Similar Questions

• iMac 27 "mid-2011 does not start after that put 10.11.3 up-to-date.

  Hello
  

  
  

  Problem:

  After you have decided my iMac demanded a critical software update, I've updated from El Capitan 10.11 to 10.11.3 today. From restarting after the update has been downloaded, computer crashes just after the start progress bar appears and begins to charge to the top.

  He took a VERY long time to start correctly. And when I say a long time, I mean ALL DAY. Literally more than 8 hours. The progress bar is completed later, and after I expected the Mac starts in the login screen, it simply not and just sitting there, with a full load until the progress bar and the Apple logo.

  Nothing happened.

  What I've tried so far:

  • Reset the PRAM
  • Start in disk utility to perform first aid. Saying that the hard drive is fine and functional results.
  • Reset SMC
  • Impossible for some reason in Mode safe start?

  What I am NOT prepared to do:

  • Reinstall a fresh OS X
  • Pay for it (I don't see how it's my fault, or that I should pay for it be repaired)
  • Extremely sensitive data loss

  I'm absolutely about to lose my mind with this problem. How an update can destroy just a machine?

  Someone has ideas on how else to go about fixing this?

  I have been updated! This is pure madness!

  Yours in disappointment,

  W

  • Reinstall a fresh OS X - is perhaps not necessary.
  • Pay for it (I don't see how it's my fault, or that I should pay for it be repaired), it's your fault in a way, but you don't have to pay to fix.
  • Extremely sensitive data - loss if you kept backups that would not be a concern.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• MBP refused to stop after that put 10.11.5 up-to-date. Need urgent help.

  Since I've updated my MBP two days ago, the stop mechanism seems to have stopped working. When I want to stop or even journal of my account, OSX leaves all background applications but the finder gets partially closed. Which means that I can still see the paper painted but there are no icons and folders with the dock still on. And that's all. Only the top bar disappears. The system is not proceed proceed again after this point. I can access the applications from the dock, the Launcher open, everything.

  I tried a few things, but they did not help. Open an app, for example, the console and all of a sudden the bar top has emerged again. Now, when I click on 'farm', nothing happens and the closure of the dialog box is not displayed. It's like my mac is half frozen, cannot be closed, but I can move the mouse and partially access to the wharf and pitcher. Until I am able to fix this, I won't be hard boot my system again. Data recovery is never a guarantee to bring back all my files...

  You probably have Wacom-software installed on the Mac. Uninstall or update to the current version.

  It may also be an element of Wacom in the users pane and groups in system preferences: in the login items tab and delete it if necessary.

• Blurry text after that put 17.0.1 up-to-date.

  After the upgrade to 17.0.1 text become blurred.
  In other programs and browsers - everything seems normal.
  I tried this:
  Anti-Aliasing Tuner
  https://addons.Mozilla.org/en-us/Firefox/addon/anti-aliasing-tuner/
  Installation and configuration of help for the text on the pages. But the text of the menu bar and address remains unclear.
  What has changed in the new version and how to disable the blur?
  Thank you.

  http://www.gHacks.NET/2012/11/24/Firefox-17-0-1-to-fix-blurry-font-issue-in-the-browser/
  Solved.

• Mac Pro (2013) will not wake up from sleep after that put 10.11.2 up-to-date

  Problem:

  After that Mac Pro goes to sleep, keyboard and mouse enter don't wake him. Disconnect and reconnect the monitor will not help either. Unplug the monitor wouldn't be helped either. Hotkeys to stop will not help either. (I use Mac since 1986, so I know more tricks). The only thing I can do to start to use my Mac is again holding down the button of physical power for five seconds and make a hard stop.

  Background:

  It is a problem that sometimes in the past. However, it is not reproducible and usually one of the steps above might work, such that unplug the monitor (a Dell 4 K 27 ") of the power supply and then plugging.

  I use physically connected (USB) keyboard and mouse.

  Current state:

  After the 10.11.2 system update last night, my Mac Pro shows this problem every time he sleeps.

  He has already hit a critical delivery photography and currently affects a submission of work for the city.

  This is urgent.

  Other users have reported the same problem after 10.11.2. I've not seen a solution

• Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7

  Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made.  All the patches?

  Thank you

  Hello Launcher,

  Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.

  I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.

  I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!

• iPhone in Recovery Mode (Will it Wipe Off Datas on storage)

  Hello

  I'm about to restore iPhone on the iPhone in Recovery Mode for my 3GS in reason to keep start/restart (with apple logo loop).

  Question:

  This restore process wipe all my data on the storage like pictures?

  That means that a restore - it will wipe all data from your phone is turned off.

  IF you have a backup that you can restore your backup.

• iTunes does not recognize my iphone after 6 put 12.3.3 to level

  I am unable to see my iphone to sync after the update to itunes to 12.3.3. I use Windows 10, and I went through all the steps here - If iTunes does not your iPad, iPhone or iPod - Apple Support .

  Anyone has addressed this issue successfully?

  I have upgraded my iphone 6 to 9.3, but I managed to synchronize after that.

  Thank you!

  1. make sure that the iOS device is connected to the computer and iTunes is closed.

  2 means open Device Manager. : http://windows.microsoft.com/en-us/windows-8/where-is-device-manager(Opens in new window) (opens in a new window) (opens in a new window) (opens in a new window) (opens in a new window) (opens in a new window) (opens in a new window) (opens in a new window)

  3. click on portable devices

  4. right click on the iOS Device

  5. click on update device driver

  6. click on Browse the computer for driver software

  7. type the following command: C:\Program Files\Common Apple Mobile Device Support\Drivers

  8. click Next

  9. open iTunes and they need to see the iOS device in the source list.

• My iPod is stuck in Recovery/DFU mode

  My iPod is stuck in recovery/DFU mode. He is stuck with the apple logo and a progress bar which is of about 1/20 of the way along. If I connect it to my computer it does not appear in iTunes or in my computer. If I try to restart of Force as suggested in this article:https://support.apple.com/en-gb/HT201263 , then it will display the logo of low battery. If I connect it to my computer, it loads and goes back to being stuck with an Apple logo and a progress bar. Any ideas on how I can fix this?

  While similar DFU mode and recovery mode are different. Try the other method and then try to rebuild through iiTunes

  Try DFU mode, then restore to factory settings / new iPod via iTunes

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  Recovery mode

  Next

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Re: How to use Recovery Expert Mode in Satellite Pro M70-220 product recovery CD

  I would appreciate advice on the following points.

  My Satellite Pro M70-220 (PSM75E-00D008G3), portable computer has 4 partitions created by Acronis Disk Director costume v9:

  C: OS - Win XP Pro SP3
  D: programs
  E: data & downloads
  F: backups

  After you start the laptop in Win XP, I inserted the recovery CD Toshiba in the DVD - RAM drive
  and sailed to the BMP file, R:\G_INST\BMP, where I found the file "menu.bmp", which gives 2 recovery
  Options:

  * 1. Retrieve entire hard drive *.
  Caveat. All data stored o your computer will be lost.
  Preinstalled software factory will be installed.

  * 2. Recovery expert Mode WARNING: *.
  This is for PC experts only.
  Preinstalled software factory can be installed on an existing partition.

  My questions are linked using the "Recovery Expert" Mode:
  -I'll be able to use the "recovery of the Expert Mode' the recovery CD to reinstall Win XP Pro (pre-installed software factory) on my C: partition, while affecting only not partitions D, E & F?
  -I'll be able to format the C: partition by using the "Expert recovery" Mode, without formatting of other partitions?
  -What is the exact procedure of "Expert Recovery Mode"?
  -where can I find more information on the procedure of "Expert Recovery Mode"?

  Thank you

  AlanCB

  > I'll be able to use the "recovery of the Expert Mode' the recovery CD to reinstall Win XP Pro (pre-installed software factory) on my C: partition, while affecting only not partitions D, E & F

  Yes, this should be possible. Using the Expert Mode of recovery, you should get the ghost window where you can select the partition where the OS is to be installed. In this case only that partition would be formatted.

  > will it be possible to format the C: partition by using the "Expert recovery" Mode, without formatting of other partitions?

  Yes, theoretically it should be possible.

  > what is the exact procedure of "Expert Mode of recovery"?
  As I mentioned above, this mode allows you to restore the operating system on a partition of some and only this partition will be formatted.

  > where can I find more information on the procedure of "Expert Mode of recovery"?
  What looking here in the forum?
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=7302ᲆ

• Pavilion dv6 3080el - sistem recovery after hard drive change

  Hello world!

  I have a pavilion laptop dv6 3080el with windows 7 and after the HARD drive that basically, I bought a disc double, specifically BLACK (2) WD Dual Drive.
  I used the DVD I reinstal windows using system recovery, but after I put in the DVD 5 and pressed "continue" to restart the system, I just get (after the first screen where by pressing ESC, you go to the Start Menu) wrote a black screen with "No boot device - insert boot disk and press any key".
  Any suggestions on how I can complete the installation of windows?

  Thank you!!!

  I just went through this same problem. See the solution posted under the message topic "pavilion dv-6 3216 does not start.

  Good luck.

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• Standby recovery after open Resetlogs

  Can someone explain the case more clearly?

  If the database pending...	Then...	Perform these steps...
  Not asked to redo data beyond the new resetlogs SCN (after the start of the new branch of data recovery)	Redo apply automatically takes the new branch of the roll forward.	No manual intervention is required. The MRP automatically resynchronizes the database pending with the new branch of data recovery.

  I can't understand the following case:

  "No data applied not repeat past the new resetlogs SCN (after the start of the new branch of data recovery).

  then your current journal seq is 124, when stop you this seq is archived, shipped in standby mode and applied, so now your Eve is also at 124.

  Meanwhile at the elementary level, like you did resetlogs, it will open the db with seq 1 and this too will be propagated to the wait and apply.

  so your wait will remain synchronized in the resetlogs operation.

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Buy unlocked iPhone 7 right after the release date

  Friends good day! Let's say I want to buy an iPhone 7 right after the release date before apple officially begins selling the devices free SIM card. I'd be able to come simply to store and buy, for example, an AT & T phone to use with my operator? Because I know that they would be not selling sim free phones in the first two weeks. Or do I have to buy a plan as well and become a customer of AT & T? In other words, I need now a unlocked device, and can I get one without waiting for the start of the free features of SIM card sale. Thank you!

  If you buy any iPhone outright directly from Apple full paying, it is carrier unlocked.