iPhone is not automatically connect to wifi

Similar Questions

• HP desktop computer will not automatically connect to wifi

  my hp desktop computer recently refused to connect to my wifi automatically, although he did years before. I have two laptops, an ipad, a blackberry bold and an ipod touch that ALL connect automatically. what the hell is happening?

  Hello

  1. don't you make changes to your computer before the problem?

  Follow these steps and check if the problem persists.

  Step 1:
  Update of your wireless cards and see if the problem still occurs.

  Step 2:

  In addition, you can uninstall and reinstall the Device Manager wireless network card to be a safer side.
   
  To uninstall the wireless device manager,
   
  a. Click Start, type device manager in the search box of start and press ENTER.
  b. Locate the network adapters and expand the same.
  c. Select the wireless connection, right click and choose uninstall.
  d. restart the computer, if prompted.
   
  Pilots should settle automatically after the computer restarts.

   

  Now you can install the latest wireless drivers and check if this solves the problem.

  See also:

  Why can't I connect to the Internet?

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• Wireless network will not automatically connect at startup

  I have Windows 7 Professional.  Whenever I start, I have to click on the wireless icon & enter key code to connect to the net.  When I go to the Network & Sharing Center, active network shows.  When I go on manage wireless networks, active network are not.  When I try to add manually, I enter all the data, and then click Next, I get the notice that access is denied. I have admin rights.. Spoke people w/HP & router without result.  Just need to find the solution that will automatically connect to the internet to start without the need to enter the key code each time I start.  Would appreciate suggestions.

  Open research, open services of type "services.msc".
  Scroll down to "wlan auto config" right click, stop the service.

  Access
  "C:\ProgramData\Microsoft\Wlansvc\ Delete everything in this folder, leaving only a folder called 'profiles' delete everything in the folder"profiles"except for a folder called 'interfaces' delete all 'interfaces' file).

  Restart "wlan auto config" to connect to your wireless network, enter
  your password (make sure that the connection is automatically checked)
   
  Restart your computer to work, your computer will now connect to your network wireless automatically at startup.

• Not automatically connect to wireless, when it is set to do

  I just bought a laptop and the wireless router, I have it set to automatically connect to the wireless network, but whenever we close the cmputer it goes back to manually connect.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• My x 2 Jaybirds does not automatically connect to my iPhone 6.

  I have associated my X 2 with my iPhone 6 and iPad Air 2, both running iOS 9.3.2. My problem is that every time that I turn them on the devices does not connect automatically to the X 2, I try them one at a time. I go to click forget device and repair so that if I do it for the first time. Any help much appreciated.

  Kind regards

  Select this option.

  Have you checked the documentation for the X 2 see if it supports be matched with more than one device at a time? If not, there is nothing you can do except re-pairing whenever you will use them. If you can't find if they will pair with several devices, you must contact the manufacturer to check with their support.

• iPad & IPhone do not fully connect to the wifi at the airport

  I installed a new Airport Express Terminal with my MBP, IOS El Capitan 10.11.2. It works fine but only with the MBP. My network is visible for iPhone, IPad. I can connect, provide the password. IPhone, IPad Mac addresses do not appear in Airport utility. But I can't access the internet. Wheel starts spinning and wifi logo does not appear on the main screen. Same story when I activate the guest network. How can I solve this problem of access?

  What is the number and model of your modem?

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• PC does NOT automatically connect to the wifi network, other devices do

  I have a pc windows 7, and we have used to have a SIEMENS router + modem via a wifi network. The pc would always auto connect to it.

  We now have a new feature called HOTBOX, used by the new company of internet infrastructure that we moved - HOT.
  I did change the password first because who really cares? His writings on the HOTBOX, my family and my guests can know, and thanks for the auto connect, which i obviously checked when I connected to it, everything should be good. Alas.
  Other devices connect, it's my smartphone nokia, iPhone, PC. Only this computer can not.
  Note: the first time where I put the password on this computer to connect, there is also an option for a fast connection or something like that. I did with my nokia phone, but not with pc - it's an easy way by pressing on a button of twinning on the refrigerator, then you can easily connect or w/e.
  IN ANY CASE! This option seems to have disappeared! Now all that appears when I click on the network name is the password field and a checkbox to auto-connect, no quick option.
  Any help is appreciated. Thank you.

  Hello

  Welcome to the Microsoft community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Satellite L840 WiFi will not automatically connect at startup

  Just bought this Toshiba, my Toshiba second year (broke the screen on the last), and the WiFi connects automatically when I start the computer.

  My friendly "person tech" went through the installation over the phone, and we got it all running. After checking that everything was OK, I suggested a reboot to see if WiFi connected automatically, because there never on my previous Toshiba.

  Guess what - it doesn't work!
  Any ideas welcome, please.

  Which is really strange. If the Connect option is enabled automatically laptop should connect on some WLAN if the WIFI network is available. To your WLAN anyway?

  Can you connect to your WLAN anyway? Is IT card WLAN when you start your laptop?

• HP Pavilion g6-1373ea WIFI not automatically connect when the computer starts or restarts. Tried everything

  At my phone 2 days and it's a great phone but it is struglling to do a simple task. I turned off the power saving mode. I made sure the wlan services are set to start on auto and I deleted the profile and added them etc. I'm a COMPUTER technician intern so I know what I'm doing, but I can't really fix this. I wouldn't have to manually connect to my wifi whenever I start my laptop. My 4 year old toshiba could manage wifi perfectly and it ran windows 7!

  The Exchange or refund should not be a problem and I could do this suddenly course if I were you. Many problems after 2 days.

• IPhone 6 not to connect to the ACER windows 10 laptop

  Ive seen tons of messages of a similar nature to this. But none is exactly the question Iam having. When I plug my iPhone 6, its picked upward by my laptop and charges. However, rather than synchronize and charge up on iTunes. It shows a page of windows Explorer and try to manually transfer my photos only. So it's almost as if the preferences are set to open windows rather than on ITunes. Now, I have followed different ways to try and solve this problem. I tried all the usb ports on my laptop, restarted the laptop, computer to update to iTunes and my iPhone. Uninstalled and reinstalled iTunes. I also went to device management settings and uninstalled the driver from apple iPhone, reinstalled and also deleted the driver and allowed windows locate the driver itself for the iPhone 6 he found no problem. However, he always brings just to the top of the windows Explorer, rather than hook up with iTunes.

  My last return was until April 2016 and its now June 2016 and I'm getting a bit wary if something were to happen with my phone I have no computer to connect to 'base '. I saved on the ICloud, but in reality, it becomes difficult to manage music and also storage from day to day.

  Someone at - it other cool ideas about trying to fix? Someone suggested to reinstall windows 10 but I don't really know where to start with this or even reset windows 10 and return to windows 7. However, I've updated to windows 10 6 months ago and I don't know if I can "just go back"

  I'm not a computer expert so any help would be appreciated means

  Thank you

  Follow these troubleshooting steps official Apple:

  https://support.Apple.com/en-us/HT204095