Lack: My DellDock runs away.

Similar Questions

• I'm looking for a program that continues to run away?

  Where can I find a program that runs continuously in the background? I don't know what to look for.

  HELP & THANKS

  Is there a reason why you have not advised him what operating system of Windows you are running including SP level, etc.?

  How did you determine that a program that continues to run away?

  Use AutoRuns to control start axis, Bette:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  UTC/GMT is 00:14 on Monday, may 28, 2012

• My fan continues to run away, just bought today

  Hi, I just bought the new laptop HP, but the fan continues to run away even if when I'm not working on it. Is this normal or should I make some adjustments? Thankx

  Hello

  You can navigate to the BIOS screen by pressing the F10 key as soon as you switch on the device.

  You can enter the BIOS and choose the option which disables the ' Fan always ON ", and this should solve the problem.

• Is there a downside to the creation of a partition in windows on macbook pro? My gut says run away!

  I went to the macbook pro away windows as much as possible; I have no idea why any company still working windows. Unfortunately I have hardware that is 'windows only' and I'm debating setting to the top of my macbook to be able to run it. Where my question. Any advice is welcome, as I said, my gut says RUN and simply use a second computer (windows at low cost version) when I need to work with the material.

  Rather than create a Partition to Boot Camp for Windows, it is possible to run Windows in a virtual environment using software such as Parallels Desktop.

• We lose our allowance of 15 GB per month because my desktop PC is running away with our consumption and yet I can't find why something is using this

  Description: My windows 7 64 bit Premium PC I use google to connect & outlook Office 2003 Professional to my mails
  Stopped working, something is using place our allocation BUT I can only find this problem below indicates my MM is stuck open (I have no idea what that means, but there is nothing that connects from or to my PC, I have screenshots to prove it.)

  I last month found a bad virus that had been arrested who was supposed to to use our connection a * 32 bad Virus but I have dealt with that & had several full crawls, nothing appears & again, the every time I connect gigabytes fly just somehow? Ant advice would help please thank you.  Signature of the problem:

  Problem event name: CLR20r3
  Signature of the problem 01: mmc.exe
  Signature of the problem 02: 6.1.7600.16385
  Signature of the problem 03: 4a5bc808
  Signature of the problem 04: MIGUIControls
  Signature of the problem 05: 1.0.0.0
  Signature of the 06 problem: 4ce7b8db
  Signature of the problem 07: A3
  Signature of the 08:138 problem
  Signature of the problem 09: VZ1GOZCYE0IDG4OJDGPOY5YQVMFEF24I
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  I still haven't heard of this last information request.

  However I have now discovered that as I use two Nuance Dragon Speaking Professional programs & their last program Advanced PDF, what they reported everything I do in their cloud of Nuance I didn't know, I didn't know that it is now back to normal, so it was the program that used all our time at high speed to the top He sent what ever their cloud.

  I knew nothing about it & also, I knew that it only ever worked with my knowledge...

  So I found this deletion of the boot record & since this was done last night he kept all our internet time using upward.

  Thank you very much for your help, which gave me a better chance to discover this & stop programs connect to the cloud. Thank you for your valuable help on it. Much thanks, Malcolm Campbell.

• Facebook app popup alert indicating app was running long

  So yesterday, I was using Facebook on my Bionic for half an hour to 40 minutes. After I did I put the phone in my pocket and went on my way. About an hour later, I take my phone to use it and wake up the phone, there was a box pop up on the screen indicating that the Facebook app did not or that he worked for an extended period of time you wish to terminate the app? I click the button it kill and that was all.

  Has anyone ever had happen on their phone? All these years I've owned an Android phone I have never seen anything like it, killer app of this bike? I know that I have not all the apps listed in the applications to kill in the killer app of bike so I don't know why this pop-up came.

  Yes, this is part of the Manager Stock tasks.

  If you open the app Task Manager and press the menu button-> settings and uncheck the box 'Notification', if you don't want this feature to warn you more.

  I think this is a good feature as some applications will use your battery if left, and it notifies you when an application is there or run away.

  Thank you

  J

• Profile of Stimulus running of the door of entry/host

  I would like to know if this is possible:

  Run a VeriStand project on one computer (the ' bridge') and run profiles of stimulus from another computer on the same subnet. I try to do that and specify IP address of gateway of the stimulus profile editor but get the error 307998:

  Compiler error...

  TopLevelSequenceFileDoesnotExist...

  But the sequence files are there. And I know it's to communicate with the gateway, because if I gave a bogus gateway address, I'd get different errors. Are there other details of configurations I need to know to run stmulus profiles to another computer?

  Thank you.

  You can run away from patterns of stimulus on another machine as the host of the gateway, but it requires some work to set it up properly. The problem is that when the stimulus profile specifies to run a real-time sequence, it specifies the file path is the path of the file on the gateway machine, and not on the local computer. So this is the problem, you probably see that the sequence exists on your local computer to the specified location, but not on the gateway machine.

  For example, if your profile of stimulus runs a sequence in real time to "c:\temp\mySequence.nivsseq", then this sequence should be in c:\temp on the gateway machine.

  You can do by storing sequences on a shared network location, which is the same for the gateway machine and the local machine. For example, if you have a file called myFiles server, you can then copy the sequences it and specify the path '\\allFiles\mySequences\mySequence.nivsseq '. It should work, because the path is the same of the local machine and the front door.

  Alternatively, you can map drive paths in Windows of hand and on the other to create the same virtual on the local drive letter and the host of the gateway.

• Problem virus causing print spooler is not running under XP

  My desktop is running Windows XP home edition SP3. All sundden printers went from 'printers and faxes '. "The print spooler service is not running" appears when I tried to add a printer.

  I tried to manually start the print spooler service, but it crashes immediately after I click on "Printers and faxes" from the control panel.

  The following logs are captured of ntsd:

  Microsoft (R) Windows User - Mode Debugger Version 5.1.2600.0
  Copyright (c) Microsoft Corporation. All rights reserved.

  wait until I fix
  Dbghelp loaded extension DLLS
  The call to LoadLibrary (ext) failed with error 2.
  Please check your debugger configuration and/or network access
  Exts loaded extension DLLS
  The call to LoadLibrary (uext) failed with error 2.
  Please check your debugger configuration and/or network access
  Ntsdexts loaded extension DLLS
  Symbol search path is: * invalid *: check the _NT_SYMBOL_PATH parameter
  Executable search path is:
  ModLoad: 01010000 01000000 C:\WINDOWS\system32\spoolsv.exe
  ModLoad: 7 c 900000 7c9b2000 C:\WINDOWS\system32\ntdll.dll
  ModLoad: 7 c 800000 7c8f6000 C:\WINDOWS\system32\kernel32.dll
  ModLoad: 77dd0000 77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
  ModLoad: 77e70000 77f03000 C:\WINDOWS\system32\RPCRT4.dll
  ModLoad: 77fe0000 77ff1000 C:\WINDOWS\system32\Secur32.dll
  ModLoad: 77f10000 77f59000 C:\WINDOWS\system32\GDI32.dll
  ModLoad: 7e410000 7e4a1000 C:\WINDOWS\system32\USER32.dll
  ModLoad: 77 c 10000 77 c 68000 C:\WINDOWS\system32\msvcrt.dll
  ModLoad: 5cb70000 5cb96000 C:\WINDOWS\system32\ShimEng.dll
  ModLoad: 6f880000 6fa4a000 C:\WINDOWS\AppPatch\AcGenral.DLL
  ModLoad: 76b 40000 76b6d000 C:\WINDOWS\system32\WINMM.dll
  ModLoad: 774e0000 7761e000 C:\WINDOWS\system32\ole32.dll
  ModLoad: 771ab000 77120000 C:\WINDOWS\system32\OLEAUT32.dll
  ModLoad: 77be0000 77bf5000 C:\WINDOWS\system32\MSACM32.dll
  ModLoad: 77 c 00000 77 c 08000 C:\WINDOWS\system32\VERSION.dll
  ModLoad: 7c9c0000 7d1d7000 C:\WINDOWS\system32\SHELL32.dll
  ModLoad: 77f60000 77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
  ModLoad: 769c 0000 76 has 74000 C:\WINDOWS\system32\USERENV.dll
  ModLoad: 5ad70000 5ada8000 C:\WINDOWS\system32\UxTheme.dll
  ModLoad: 763ad000 76390000 C:\WINDOWS\system32\IMM32. DLL
  ModLoad: 629c 0000 629c 9000 C:\WINDOWS\system32\LPK. DLL
  ModLoad: 74(d) 90000 74dfb000 C:\WINDOWS\system32\USP10.dll
  ModLoad: 773d 0000 774d 3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Cont
  rols_6595b64144ccf1df_6.0.2600.6028_x-ww_61e65202\comctl32.dll
  ModLoad: 5 d 090000 5d12a000 C:\WINDOWS\system32\comctl32.dll
  ModLoad: 742e0000 742f5000 C:\WINDOWS\system32\SPOOLSS. DLL
  ModLoad: 71ab0000 71ac7000 C:\WINDOWS\system32\WS2_32.dll
  ModLoad: 71aa0000 71aa8000 C:\WINDOWS\system32\WS2HELP.dll
  ModLoad: 71a 50000 71a8f000 C:\WINDOWS\System32\mswsock.dll
  ModLoad: 76f20000 76f47000 C:\WINDOWS\system32\DNSAPI.dll
  ModLoad: 76 60000 76 79000 C:\WINDOWS\system32\iphlpapi.dll
  ModLoad: 76fb0000 76fb8000 C:\WINDOWS\System32\winrnr.dll
  ModLoad: 76f60000 76f8c000 C:\WINDOWS\system32\WLDAP32.dll
  ModLoad: 64025000 64000000 C:\Program Files\Bonjour\mdnsNSP.dll
  ModLoad: 76fc 0000 76fc 6000 C:\WINDOWS\system32\rasadhlp.dll
  ModLoad: 75bb0000 75 c 07000 C:\WINDOWS\system32\localspl.dll
  ModLoad: 76C 60000 76c8a000 C:\WINDOWS\system32\sfc_os.dll
  ModLoad: 76C 30000 76c5e000 C:\WINDOWS\system32\WINTRUST.dll
  ModLoad: 77a 80000 77 b 15000 C:\WINDOWS\system32\CRYPT32.dll
  ModLoad: 77b 20000 77 b 32000 C:\WINDOWS\system32\MSASN1.dll
  ModLoad: 76C 90000 76cb8000 C:\WINDOWS\system32\IMAGEHLP.dll
  ModLoad: 73000000 73026000 C:\WINDOWS\system32\winspool.drv
  ModLoad: 5b 860000 5b8b5000 C:\WINDOWS\system32\netapi32.dll
  ModLoad: 742a 0000 742ae000 C:\WINDOWS\system32\cnbjmon.dll
  ModLoad: 7240e000 72400000 C:\WINDOWS\system32\tcpmon.dll
  ModLoad: 723f0000 723f7000 C:\WINDOWS\system32\usbmon.dll
  ModLoad: 77a 13000 77920000 C:\WINDOWS\system32\setupapi.dll
  ModLoad: 77a 13000 77920000 C:\WINDOWS\system32\setupapi.dll
  ModLoad: 009b 0000 009 b 8000 C:\WINDOWS\System32\spool\PRTPROCS\W32X86\mdippr.dl
  l
  ModLoad: 3f420000 3f43b000 C:\WINDOWS\System32\spool\PRTPROCS\W32X86\filterpip
  elineprintproc.dll
  ModLoad: 009d 0000 009d 6000 C:\WINDOWS\System32\spool\PRTPROCS\W32X86\WfxPrint2
  000 dll of
  ModLoad: 76bf0000 76bfb000 C:\WINDOWS\system32\PSAPI. DLL
  ModLoad: 71a 50000 71a8f000 C:\WINDOWS\System32\mswsock.dll
  ModLoad: 76fb0000 76fb8000 C:\WINDOWS\System32\winrnr.dll
  ModLoad: 76f60000 76f8c000 C:\WINDOWS\system32\WLDAP32.dll
  ModLoad: 64025000 64000000 C:\Program Files\Bonjour\mdnsNSP.dll
  ModLoad: 75 c 10000 75 c 34000 C:\WINDOWS\system32\win32spl.dll
  ModLoad: 71c 80000 71c 87000 C:\WINDOWS\system32\NETRAP.dll
  ModLoad: 767a 0000 767 b 3000 C:\WINDOWS\system32\NTDSAPI.dll
  ModLoad: 76fd0000 7704f000 C:\WINDOWS\system32\CLBCATQ. DLL
  ModLoad: 77050000 77115000 C:\WINDOWS\system32\COMRes.dll
  ModLoad: 74300000 74315000 C:\WINDOWS\system32\inetpp.dll
  ModLoad: 01010000 012d 5000 C:\WINDOWS\system32\xpsp2res.dll
  ModLoad: 012e0000 015c 2000 C:\DOCUME~1\Owner\LOCALS~1\Temp\C.tmp
  Access violation - code c0000005 (first chance)
  EAX = fffffd0b ebx = ffffffff ecx = 000001e5 edx = fffffd0c esi = 00000000 edi = ffffffff
  EIP = 7e428944 esp = 00adef40 ebp = 00adef4c iopl = 0 nv in pe of na EI pl nz nc
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00010202
  ERROR: The symbol file is not found.  By default for the export of symbols for C:\W
  INDOWS\system32\USER32.dll-
  USER32! CharLowerBuffA + ff:
  7e428944 8a 08 mov cl, [eax] ds:0023:fffffd0b =?
  0:004 > k
  ChildEBP RetAddr
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  00adef4c 7e4248d8 USER32! CharLowerBuffA + 0xff
  ERROR: Module load completed but symbols can be loaded for C:\DOCUME~1
  \Owner\LOCALS~1\Temp\C.tmp
  00adef70 012e1133 USER32! GetCursorFrameInfo + 0xe0
  00adf208 012e1073 C + 0 x 1133
  ERROR: The symbol file is not found.  By default for the export of symbols for C:\W
  INDOWS\system32\ntdll.dll-
  00adf228 7c90118a C + 0 x 1073
  00adf248 7c91b5d2 ntdll! LdrInitializeThunk + 0 x 24
  00adf350 7c9162db ntdll! LdrFindResourceDirectory_U + 0x28d
  00adf5fc 7c91643d ntdll! RtlValidateUnicodeString + 0 x 511
  ERROR: The symbol file is not found.  By default for the export of symbols for C:\W
  INDOWS\system32\kernel32.dll-
  00adf8a4 7c801bbd ntdll! LdrLoadDll + 0 x 110
  ERROR: The symbol file is not found.  By default for the export of symbols for C:\W
  INDOWS\system32\SPOOLSS. DLL-
  00adf90c 742e5f70 kernel32! LoadLibraryExW + 0xc8
  00adf934 742e5946 SPOOLSS. BuildOtherNamesFromMachineName + 0x1cb
  00adffb4 7c80b729 SPOOLSS. InitializeRouter + 0x34f
  00adffec 00000000 kernel32! GetModuleFileNameA + 0x1ba
  0:004 >

  Help, please

  MSE lacks many things, run a Malwarebytes scan: http://www.malwarebytes.org/

  John

• I can't run my Norton bootable recvery tool?

  Norton support gave me a copy of their bootable recovery tool to check my virus from the system. They tried to run away, but could not enforce. Also, I tried several times without success. He told me to stop and go to the page of the bios to change to load THAT CD/DVD which I have several times without success. I have a windows system 7 on a gateway DX4850-27F. It has a 6 GB memery and 1.5 TB of hard drive, I-5. Any info will be greatly helpful and appreciated. Al ;)

  Take a look at this site for some great instructions/information on the removal of virus/malware.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Problem in the configuration of the ADR.

  Hello

  I'm setting up ADR REST on my local machine for demonstration purposes. I did the procedure below, but I'm not

  able to run the REST service, or connect to the workspace that is customized by using the access link. Please guide if I'm missing any step.

  I have APEX 5.0 installed on my machine and using ADR 3.0.

  (1) I installed the latest version of oracle APEX on my machine, and it works perfectly fine.

  (2) I did the steps to install and configure the ADR service below.

  (a) set up the directory config for the listener of the apex:

  C:\Oracle\restords\apexlistener > java-jar ords.war C:\Oracle\restords\apexlistener\configdir configdir

  (b) run the installer of the listener:

  C:\Oracle\restords\apexlistener > java-jar ords.war of installation

  (c) edited the file defaults.xml in the apexlistener config file. Added to the key:

  < key "security.verifySSL entry" = > false < / entry >

  (d) began the listener autonomous and changed the port 8091

  Navigated localhost:8091 / ADR and the link works fine.

  (e) created a newfound mew EMPSYS workspace: log on above link and workspace has also created a new schema

  with the same database name

  The real problem is to come in the configuration of a path to the database and of the database to a URL mapping. Here are the steps that I did.

  (a) run the command to create the new db definition below.

  java-jar ords.war installation - database empsys

  He created three new files config dir empsys.xml,empsys_al.xml,empsys_rt.xml

  (b) run the command to map data to a URL below:

  java-jar ords.war map-url - type base-path - space work-id empsys /empsys empsys

  Initially it gave the error id of the workspace is not a valid option. I then deleted the job-id space and used

  Workspace option. Executed under command and executed without error.

  java-jar ords.war map-url - type base-path - workspace empsys /empsys empsys

  (c) started the independent auditor

  (d) navigate tolocalhost:8091/ADR/empsys and link gives 404 - page not found error.

  Here is the detail error that I get on internet explorer.

  oracle.dbtools.http.errors.NotFoundException at oracle.dbtools.url.mapping.URLMappingsProvider.map(URLMappingsProvider.java:79) at oracle.dbtools.url.mapping.filter.URLMappingFilter.doFilter(URLMappingFilter.java:55) at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51) at oracle.dbtools.http.locale.LocaleFilter.doFilter(LocaleFilter.java:60) at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:45) at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51) at oracle.dbtools.http.cors.CORSResponseFilter.doFilter(CORSResponseFilter.java:71) at oracle.dbtools.http.filters.HttpResponseFilter.doFilter(HttpResponseFilter.java:45) at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51) at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:71) at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:45) at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51) at oracle.dbtools.http.ecid.ECIDFilter.doFilter(ECIDFilter.java:35) at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:45) at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51) at oracle.dbtools.http.filters.Filters.filter(Filters.java:46) at oracle.dbtools.http.entrypoint.EntryPoint.service(EntryPoint.java:74) at oracle.dbtools.http.entrypoint.EntryPointServlet.service(EntryPointServlet.java:46) at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) at oracle.dbtools.rt.web.HttpEndpointBase.dispatchableServices(HttpEndpointBase.java:166) at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:751) at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:566) at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:219) at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1111) at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:498) at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:183) at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:1045) at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:141) at org.eclipse.jetty.server.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:199) at org.eclipse.jetty.server.handler.HandlerCollection.handle(HandlerCollection.java:109) at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:98) at org.eclipse.jetty.server.Server.handle(Server.java:461) at org.eclipse.jetty.server.HttpChannel.handle(HttpChannel.java:284) at org.eclipse.jetty.server.HttpConnection.onFillable(HttpConnection.java:244) at org.eclipse.jetty.io.AbstractConnection$2.run(AbstractConnection.java:534) at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:607) at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:536) at java.lang.Thread.run(Unknown Source) 

  Here is the error that I see on cmd terminal where I started the APEX in stand-alone mode.

  Connection: keep-alive

  Host: localhost:8091

  = Cookies in request =.

  ORA_WWV_REMEMBER_UN = ADMIN:EMPSYS

  ORA_WWV_USER_102293903029343 = ORA_WWV-ejsROyfGs4llylrpzBQETDmF

  SID: 138

  isValidRequest(), name of the procedure: < empsys >

  Validation: empsys

  Total number of arguments: 0

  Procedure REJECTED with error code: 404

  = Request processed =.

  Try to treat as a Service that can be distributed

  I'm deploying ultimately REST ADR on server Glasfish. I have even deployed to the glassfish server after doing steps above

  and when I create new service the rest of the space of custom work and test it. The Service continues to run away and then times out.

  Please let me know if I have miaased all the installation steps.

  Thank you

  Hi Alain Mercier.

  Thank you with the error and environmental information.

  See my answer above: Re: problem in the configuration of ADR. (Users APEX_LISTENER and APEX_REST_PUBLIC_USER lacks CREATE SESSION privilege?)

  As stated above Colm Divilly in his answer that there are known bugs on the URL mapping in ADR 3.0 are trying to move to the old stable version i.e. ADR 2.0.10.

  Kind regards

  Kiran

• El Capitan: runaway tmp file in/private/tmp

  Hello

  I have an iMAC (5K, 27 inches, end of 2015), 16 GB RAM, Core i5 (El Cap 10.11.6 running) and have had a problem with my boot drive fill even if I 308 GB of free space. After investigation, I found a temp file located in HD/private/tmp which appears immediately after the opening of session and which grows spontaneously - sometimes as much as 3 GB in a minute. Usually, the 308GB of free space, I started with that gets swallowed up in time. I also have another user with the same computer, but in executing Yosemite (10.10.5), who have the same symptoms.

  I use Outlook for MAC 2016 and the other user's MAC Mail for his e-mail client. I looked at this first just in case where the email could be the cause, because together we have E-mail ridiculously large stores, but I don't know yet why this just tmp file runs away as he does.

  Also, after reboot I get my space free return but also the tmp file and that it just starts to grow again. As a test, I started my computer but did not open ANY OTHER apps at all but one window Finder/private/tmp and then I sat down and watched - less than 10 minutes as tmp folder blown out to more than 20 GB and I never even touched the computer.

  Any ideas?

  Thank you

  By chance do you have any antivirus, cleaning or ANY third party maintenance installed applications?

• Digital certificates and runaway trustd

  Just improved El Capitan (10.11), Sierra (10.12). Updated the o/s, kept my applications and data on both a beginning 2011 MacBook Pro and an iMac end of 2013.

  First question mentioned was that Outlook for Mac 2016 hung on the iMac, if I tried to open a digitally signed message (DoD PKI-signed). Had to force quit.

  Next issue noted was that Keychain Access hung when I tried to start it. No window of Keychain Access, never not published, if the icon showed in the dock. Open Activity Monitor to investigate and found that the process trustd seems to have run away. The memory of the process was beyond 1 GB. Forced quit Keychain Access, then sent a HUP signal to my trustd process via the terminal. Once he showed up, process trustd memory reached 11.9 MB.

  Trying to reopen the Keychain Access, but it hung again. I let it go for a while, and Sierra informed me that he had become insensitive (thanks!). Killed, then looked at the allocation of memory of trustd. It was close to 2 GB.

  I upgraded the Macbook Pro at the same time (won't do again). Soon after the connection, I noticed that the fan spun. When he didn't slow down after a bit, I open Activity Monitor and saw that trustd process memory beyond 8 GB. (The total physical memory on the Macbook is 8 GB).

  On the iMac and Macbook, I created the new keyrings connection to get rid of all personal digital certificates.

  It helped on the iMac. I work in the old Keychain, so I do not have access to the certificates. If I do, Keychain Access crashes and trustd fled. I can return to normal by sending a HUP and stop smoking-force Keychain Access. In addition, Outlook crashes and trustd fled if I touch a digitally signed message. Again, I can go back to normal in force - quit Outlook and sending a HUP to trustd.

  The set of connection fees did not help on the laptop. trustd to save, eat memory in the process. I could reset by sending a HUP, after which she would free up the memory, but then he save again. From scratch (erase the hard drive, install Sierra) solves the problem of runaway trustd. I did not restore the Keyring containing digital certificates.

  Is this a problem with trustd? I need personal digital certificates to work on at least one of the computers.

  I also have problems with a runaway trustd, although slightly different triggers.  I'm trying to synchronize my mailboxes from several of my servers.  It downloads a few hundred saved messages, then trustd goes into overdrive, the fan is used, and the computer works nothing except trustd.

• Cannot send pictures of the iPad to Hotmail

  I know that this problem has been asked and addressed several times, but I have not yet found a solution.

  For some reason, my iPad is no longer will allow to send me photos to my Hotmail account. I've had this problem once before and was able to find the solution, but not this time. In any case, I tried to quit all applications, restart the iPad, iPad, deleting the e-mail account reset, etc. Any help would be greatly appreciated. Thank you.

  Genki wrote:

  For some reason, my iPad will be Let me no longer send photos to my Hotmail account.

  Explain what it means that, if you please. Your iPad run away when you try to send e-mail?

• Window is too big for the screen, do not set by f11 or alt/space

  When enlarged, the view is too big to get the edges to move smaller. When I try to drag the top bar, it jumps to the small view rather than allowing me to reposition the window. The reduced view is only about 2 x 4 inches. Of course, I can make this larger point of view, but then I lose the choice of two sizes.

  There is no problem with changing the size of the fonts, etc, just the size of the main view. The problem is that in Firefox, not other programs.

  I tried the Firefox reset procedure, but that didn't help either.

  Oh, wait. You cannot resize a window enlarged, so that it runs from edge to edge without the sizing handles is normal Windows. You need only the above procedure, if the window is so large that it blocks the taskbar or the monitor runs away.

• a Web site asks me to install something, I'm not sure that it is legitimate

  Hi, all.

  on a tourist site, I clicked on the link for a list of shopping places. I get a notice that says: "you must install this thing to get this link to work." It has a logo of firefox, but I'm still nervous, having obtained Burns very badly once with a pop-up that said he was of the people 'windows' and it really wasn't.

  This is what it says-

  You are currently browsing the web with Firefox and your VCR may be outdated

  Please install the latest Codec Pack for optimal performance

     Supports MP3, WMA, RealVideo, RealAudio, DivX, XviD
     Based on FFDShow and Haali splitter
     One install for all your codecs needs
     100% Free & Safe - share it with your friends
  

  is it possible for me to do that, or should I run away as fast as I can?

  Thanks - susie margaret

  NO - I would not allow the installation of a Codec pack just to get 'something' in a Web page that I just found out...