PC does NOT automatically connect to the wifi network, other devices do

Similar Questions

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• My PC (Windows 7), will automatically connect to the new networks unknown wireless is in the range. I want to stop it.

  I found a variety of positions that describe how to disable the "connect automatically" option for a specific network you connected to in the past (via 'manage wireless networks), for example:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-disable-auto-wireless-connect-in-Windows-7/52d33896-F356-4F9F-8390-79a686900cab
  http://checit.SCU.edu.au/index.php/FAQ/387
  They do not resolve my problem because my computer connects automatically on * new, unknown * networks that I've never connected to the front (and also, even after it connects to these networks, they do not appear in the list under 'Manage wireless networks').
  Apparently, it set to the default behavior to automatically connect to the new network he meets, and I need that to turn off. Thank you.
   

  Hi Michael,

  I suggest you to perform the steps mentioned by "Steve Winograd replied on November 6, 2009"of a similar discussion.

  Wi-wired connections on the same computer, Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wired-and-wireless-connections-on-the-same-Windows/ee40d9a6-297b-46D4-b5c8-db57d927b62e

  If the problem persists, I suggest to uninstall and reinstall the wireless card to reset all wireless connections.

  Hope this information helps. Response with status so that we can help you.

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.

• HP laptop could not connect to the WiFi network

  My HP Pavillion G6 connects to the Wifi/Home network. It worked fine until recently. It can see the network but will not connect. My product number is C9M83PA #ABG. There running Windows 8.1. Very frustrating. Help, please

  Problem has been fixed. It seems that HP and Windows 8.1 did not get along! After you connect the laptop to the internet via an ethernet cable, I was able to use the HP Wizard to download the updates. I then rebooted both the laptop AND the router and everything works.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• Comouter is no longer automatically connects to the wireless network.

  Until recent netbook Hannsbook my wife automatically connected to our wireless network when turned on.  We recently took a trip and used a different wireless network.  Back home, he is no longer automatically connect when turned on.  Software Troubleshooting in the Windows 7 Home Premium says he has been "manually disconnected' and it restores the connection.  I deleted all the other networks wireless to the computer.  Page manage wireless networks correctly identifies the network and says it should connect automatically.  BUT IT'S NOT!

  Once connected, the router works fine.  The connection is NOT lost when the computer goes into power saving mode. How do we get to resume its old custom to connect automatically when the computer is powered?  My wife is a technophobe and have to mess around to make the connection can be the drop of water!

  Hi Stuart,

  Do you have an error message when you try to connect to wireless networks?

  Perform the steps suggested by don241 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Answer please if you have any questions.

• Get the IP addresses of the devices connected to the WiFi network

  Hello guys,.

  I've been looking around and trying to understand this point, but I don't have a solution. The problem is to get the local IP addresses of all devices connected to the WiFi point of access/router connected to my BlackBerry. Similar to the way in J2SE nature you can get the IP using InetAddress.getLocalAddress () and then browse ip addresses and call InetAddress.getByAddress (ip) to check whether the device is accessible. Possible is something similar in BlackBerry or not?

  No, the fault was entirely mine, I misread your message.
  no idea how to do that, there is no access from low level of the network interface and the API is really limited.

• Why my laptop is not to connect to a wifi network secure?

  My laptop connects to the wireless networks unsecured, but do not connect to secure wifi networks. Is it because he is my Windows 7 Service Pack 1?

  Dear Jessen

  When I changed the password to the default password that has been provided by the manufacturer, it worked.

• HP Pavilion g6-1373ea WIFI not automatically connect when the computer starts or restarts. Tried everything

  At my phone 2 days and it's a great phone but it is struglling to do a simple task. I turned off the power saving mode. I made sure the wlan services are set to start on auto and I deleted the profile and added them etc. I'm a COMPUTER technician intern so I know what I'm doing, but I can't really fix this. I wouldn't have to manually connect to my wifi whenever I start my laptop. My 4 year old toshiba could manage wifi perfectly and it ran windows 7!

  The Exchange or refund should not be a problem and I could do this suddenly course if I were you. Many problems after 2 days.

• My x 2 Jaybirds does not automatically connect to my iPhone 6.

  I have associated my X 2 with my iPhone 6 and iPad Air 2, both running iOS 9.3.2. My problem is that every time that I turn them on the devices does not connect automatically to the X 2, I try them one at a time. I go to click forget device and repair so that if I do it for the first time. Any help much appreciated.

  Kind regards

  Select this option.

  Have you checked the documentation for the X 2 see if it supports be matched with more than one device at a time? If not, there is nothing you can do except re-pairing whenever you will use them. If you can't find if they will pair with several devices, you must contact the manufacturer to check with their support.

• I'm upgrading Firefox 20.0 but not automatically connect to the server, just hangs. Why? 19.0.2 States that it is "free" update channels: what is it?

  Regularly alert is displayed to update me to 20.0 but it does not connect to the server - even if I have no problem with the modem at another time. It just hangs there. I thought that Firefox will update automatically. I have topped up, as advised but still 19.0.2. On the message States, I am currently on the channel "update of output". What does that mean? Do I need an update? Why?

  "update of output" means that you are using the stable version of Mozilla Firefox.

  Have you tried to reset firefox and then runs the update to verify that it contains that you are to the latest version?
  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems