Similar Questions

• A PC on the network does not connect to internet

  This has proved to be very difficult.  A PC on my network has been to connect to the internet.  I thought it was because I installed a new router, especially when I moved the PC to connect directly to my cable modem - when he was working.  But I also thought that upgrading to Windows 7 from WP would take away any problem on the PC - but it didn't.  Thus, with the help of an expert on a Linksys forum, I've implemented (to my satisfaction anyway) is not a router problem.  Indeed his inspection of ipconfig/all and stuff has shown that everything was normal with this PC as well as others.  The PC collects the IP address, etc., it is simply not receiving data from the internet.  I had already checked that it was not a firewall, using Norton Uninstaller issue to ensure that everything was gone.  The network adapter works and I've updated the driver.  I have since also rolled back to XP for doing the same thing and still nothing.

  The expert from my router comment was "well, the IP of the computer configuration is correct and the router works as you have other computers that connect to the internet via the router. It seems that if the installation of Windows has serious problems on this computer. I suggest that ask you in a Microsoft forum on how to reset the configuration of the network on your computer to make it work again. So far I would say that it is not a problem with the router or caused by the router. »

  The only thing I would add is that system restore has failed for a while on this PC.  Of course I would have used it to try to solve this problem, but I can't.  I tried various fixes for whom these for one, there included opening in SafeMode etc, but nothing worked.

  Help please!

  Hi, sorry bit slow on this - alert does not.  The answer would have been wired and Wireless does not, but I just reinstalled a Linksys network adapter and hey presto it works!  I haven't been back to try the wired LAN but guess it still does not.  So I think that the diagnosis of network card is OK but incorrectly excluded earlier because the PC said that he was OK and wireless did not work either at this time.  But I guess it's possible that uninstall and then reinstall the Linksys may have released something somehow.  BTW I had disabled the native Windows Firewall also.  Was it wrong?

• Computer and the phone does not connect

  Im trying to sign on my iMessage on my computer, but it only connects to my email address and not my phone number when he use to all. What is going on?

  See if that helps. Bind your iPhone number and your Apple ID to use iMessage and FaceTime - Apple Support

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  Hello Jimmy10 66,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

  Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

  Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

  If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

  Best regards

• iPhone 5s does not connect to internet unless its connected to wifi

  I have a 5 s IPhone it does not connect to internet unless I'm at home connected to wifi. I can not send imessages or browse the web what should I do?

  You did that mobile data is turned on in the settings/phone/cell data?

  Also, make sure that the apps you want to use for the cell data are enabled in the list below these settings.

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  on my computer, I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  Hello

  1. Is there an error code or the message that if displayed when it is unable to connect to the Internet?
  2. You use a wired connection or wireless?
  3. You use the administrator account or standard account?
  4. All changes made to the computer before the show?
  Method 1:
  Check out the link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 2:
  Visit the link and try the troubleshooting provided steps.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• 114 the desire does not connect to Asus all-in-one wireless but connects to the wireless network

  I just bought my HP ENVY 114 e all-in-one last week and I tried to connect it to my computer (Asus all-in-one Windows 7 64-bit) and while he wil connect to my wireless very well my computer (or my cell phone which is also an Asus running windows 7 64 - bits) cannot identify it.

  Using the disc doesn't help nor did try manually to add in 'Add printer' in my computer and all the interest to get this particular printer was because it was wireless. If I have to plug in a USB key then I have saved money and bought a less expensive model. All my devices are on the same network, and their firewalls is turned off so that it does not hinder the process.

  When you browse the drive Assembly he asks the IP and I get it exactly as it is on the screen printer that I even printed it out and double checked 5 times and it was exactly the same, but he keeps asking for me to be reintroduced to it since the computer cannot identify the printer.

  Any help would be great I prefer not to have to pack up this thing and take it back...

  Unfortunately, the router and the printer do not get along at this stage.  The IP address changes too often and it is possible that the router has its own firewall.  A large number of firewalls, outside the Windows Firewall, sees a lot of traffic from hpnetworkcommunicator.exe and blocks preventing the software to find the printer.

  I saw this model of router and it doesn't have a built-in firewall.  Unfortunately, I could not see their manual without you register on the site.

  It may be preferable to set a static IP address for the printer in the router's routing table.  To do this, you acceding to EWS the router.  If you don't know how to set the printer's IP address in the router, you can try to contact the vendor of the router.

  Otherwise, I would recommend checking the firewall of the router.  I saw a router cause problems with an overactive firewall in place.

  If you happen to have an extra router around, you can try to use it instead of Paul's to confirm that it is the router.

  EDIT

  You can try to put a static IP address on the front of the printer.  I'm personally not too successful with setting a static IP address on the front panel when the SAP does not load, but this could be one of those cases where it does not.

  First, print a Network Setup page by going to Configuration > Wireless > Network Configuration > print Network Configuration.

  Then, go to settings > network > IP settings > change to the manual.

  Once it is replaced by the manual, it should allow the IP address, default gateway and the subnet mask.  Use the subnet mask and default gateway of the print network configuration.  Use an IP address that is not in use on the network.  You can change the last number of the IP address on the print.  For example, 192.168.1.50 could be converted to 192.168.1.250.

  Setting a static IP address on the front panel does not set servers DNS which is necessary for ePrint operate on this printer.  Now that the static IP address has been set on the front panel of the printer, try to access the SAP by entering the IP address that comes to be defined in a browser address bar.  If the printer load, you should be able to set DNS servers and be ready to go from there.

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Will be CC work offline, if the PC does not have an internet connection?

  My photo club uses a laptop to demonstrate techniques using Photoshop and other photo editing packages - in this case once a month.
  The laptop is used in a place without an internet connection.
  It is sometimes taken off-site in order to connect to the internet and run updates/maintenance.

  So we bought the program of photography, with the monthly payment, what would happen if the laptop was not connected to the internet for more than 99 days? Apps would go?

  Since the demos take place every month, I suspect that we could operate for 3 months and then on the 4th month not to be able to run.

  If we connected to a mobile phone, the applications would be able to login and update their status quickly?  or is it a large number of data transfer?

  Hi Phil,

  Applications will not run if the subscription is not activated after 99 days, activation also requires no heavy data transfer and internet connection via a mobile phone does not work.

  -Pierre

• Satellite L40 - the Wireless does not connect until svchost has been disabled

  Hello.

  I have a Satellite L40 without BONES, I bought and I installed a XP/SP3. I have a small problem when I connect to my wireless NET. It does not connect until I open the Task Manager and remove one of the two svchost process open with the name 'network service '.

  Someone has an idea of why this never happens and how to fix it (I can opperate thereafter, but is a little annoying to have to do each time).

  Thank you.

  Tried to reinstall the wlan drivers and utilities already? When you do so, you should check the download pages of Toshiba for the latest version of the driver.

  Is the WinXP installation you have performed, had integrated SP3 or SP2? Because I would like to know if wlan worked with SP2.

• the airport does not connect to the internet new

  I moved and now my airport does not connect to my new internet provider.  Can anyone suggestion solutions?

  Any time you change your provider or hardware networking it is always a good idea to perform a complete recycling of your network equipment power. Please check the following Tip of an airport users for assistance. Post back your results or if you need further assistance.