Trouble when using the FPGA to record data on PDM

Similar Questions

• There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

  There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

  You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

• Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

  Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

  I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
  You can also consider its under warranty.
  Any ideas anyone?

  Hello

  It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

  > and when using the laptop without a windows mouse explore 'restore down' at random.
  >
  > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

  Whereas it should be, where´s now the problem?

  Please give clear and understandable feedback, then I and other users you could point to the solution.

  THX

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• disable the touchpad when using the mouse?

  How to disable the touchpad when using the mouse?

  Hello

  Please contact Microsoft Community.

  Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

  You can also disable the touchpad in Device Manager.

  To disable the touchpad in Device Manager, follow these steps:

  1. Click Start.
  2. In the start search box type devmgmt.msc, and then on enter.
  3. In Device Manager, expand mice and other pointing devices and locate the touchpad.
  4. Right click on the touchpad and click on the disable option.

  Following the steps above should help you disable the touchpad.

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Android APP and Native application using the same push record ID

  Hello

  We have an Android existing converted app we use for BB10 platform that we are in the process of gradually. Replace this app is an application of BB10 Native with the same name and features.

  My question is that I have to get a new record ID to push for the new Native application or can I use the existing production record ID?

  Ideally, I would like to migrate my users off the coast of the old version of the application to the new with the least problems for customers.

  Thank you

  Andrew

  You should be able to use the same ID for this record.