Iphone5 is compatible with JIO 4 G Volte?

Similar Questions

• iPhone compatible with Verizon A1688 6s

  Hello, I just bought another iPhone 6s A1688 model; previously I used to have another 6 s model A1688, however, when I put the nano-sim Verizon, I can only use LTE, so could not do all calls or calls received. I went to an Apple Store, and they told me that my iPhone 6 s has been locked, however, when I returned to my country, I could use any sim-nano, for any carrier.

  I have already watched the Apple Web site on the compatibility of the 6s with carrier iPhone models, and it is said that the model A1688 is compatible with Verizon; Therefore, I want to know which are the steps to set up my new iPhone 6 s, to make and receive calls with Verizon. I have to make sure that my new 6 s iPhone is unlocked.

  Thanks for the help.

  Hi Solomonx1,

  Thank you for using communities of Apple Support.

  I see that you are unable to make and receive calls on Verizon LTE for international travel.

  Use calls using voice over LTE (VoLTE) and make sure that voice over LTE (VoLTE) is enabled on your iPhone, in particular, this section:

  Turn on the VoLTE

  Some carriers activate this feature by default. To find out if VoLTE is enabled, go to settings > cell phones > turn on LTE. If the voice and data is off, tap it. It depends on the VoLTE.

  

  Additional information can be found here.

  If you can not make or receive calls on your iPhone

  Best regards.

• Tecra A4-109: is - this 1 GB PC2-4300 DDR2 memory compatible with this model?

  I've had this laptop model Tecra A4 109 for a year and a half. I need to upgrade its 512 MB of memory by default. http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&action=SHOW_ATTRIBUTES&t ab = 1 & PRODUCT_ID = 102108 & Type = 2319 & family = 2328 & series = 100900 & model = 102108 & x = 98 & y = 14 #1
  from this site, I checked the memory compatible types.

  As this link says "1024 MB (1 GB) memory PC2700 DDR SODIMM (333 MHz), 1 GB PC2 - 4300 DDR2 Memory, 1 GB memory DDR2 PC2-4300" are the compatible memory. (But in the manual of the laptop that is present in the C:\TOOLSCD\manuals, the compatible option only is 1024 MB (1 GB) PC2700 DDR SODIMM (333 MHz) memory).

  I checked a few memories of laptop DDR2 by traders the but they actually wouldn't fit in the memory locations with ease. If I force it to adapt, it can insert into the slot. But there is a chance to have a broken and useless memory. Memory DDR work with 5 volt DDR2 memory work with 2.5 to 4 Volts AFAIK. Of DDR and DDR2 memory slots are also a bit different from each other. Now I'm confused.

  Official web pages of Toshiba says and what I found in the laptop manual are contradictory to each other. Who is telling the truth?

  I'd appreciate the help. Thank you...

  Hello kamel

  I can understand that you are confused, but it is not so complicated. I checked a few pages and here is the result:

  Tecra A4 comes in two different models.
  1 Tecra A4 - PTA40E-xxx (your model). Compatible memory module is 1024Mo PC2700 (PA3313U-2M1G)
  2 Tecra A4 - (PTA42E-xxx). Compatible memory module is DDR2 400/533 1 GB (PA3411U-1M1G)

  As you can see that the two hardware platforms are completely different. Copy the PA3313U-2M1G module. It is compatible with your Tecra.

  Good bye

• VS800UT #ABA: help! What external ac adapter is compatible with the HP Compaq 8000 Elite computer PC VS800UT #ABA

  I have searched for days and have not found much information on the AC adapter that that uses this model

  PC product no. VS800UT #ABA

  [Personal information]

  HP ELITE 8000 PC-ULTRA-SLIM

  I know that this PC uses a power adapter with an intelligent pin and will not work if the model is incorrect, even if the Volt amps and power are correct.

  It did not work. 4 PC beeps 2 second break times 5 average (incompatible) or defective or both.

  

  

  model: 647982-001

  Replace with hp spare: 648964-001

   

  ==

  Based on the selector hp model: 592491-001 is the only listed compatible with my PC model

  the back of my PC just above taken power said 19.5 volts

  [Personal information]

  ==

  It would work?

  I do not have it, it seems to have 592491-001 on it, but as a replacement with model number does that mean a cross between these models compatibility is one thing?

   

  

   

  Thanks in advance.

  G31, welcome to the forum.

  Here is information on HP Partsurfer parts to the United States.  It shows the power adapter.  Thus, it may be that it is still available.  Also, here is the illustrated parts and Service card and hardware reference Guide or the computer.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• suggestion for soil moisture sensors that compatible with NI Labview?

  any suggestion for soil moisture sensors that compatible with NI Labview? Help me ~ ~!

  Fauzan says:

  any suggestion for soil moisture sensors that compatible with NI Labview? Help me ~ ~!

  Let me address your concerns about "compatible with NI LabVIEW" by asking you a question. Which soil moisture sensors are compatible with C++? Visual Basic? Visual C? JAVA?

  The sensors have a layer connection between himself and the computer. Sometimes, the sensor itself is directly connected to the computer via USB. Most of the time, there is a layer of connection which will interface to the computer - USB, RS-232, GPIB, PCI - and linking the layer is an acquisition of data, or simplified for your application, an analog input Module. It is up to you to set your software to interface with these devices.

  Now, I don't want to insult your intelligence. I bet you already know such things. But your question reads as if you have the same false ideas about LabVIEW with many people. That, LabVIEW is somehow a direct interface with the hardware, and you just bought sensors and LabVIEW magically presents the data. No matter what some people well planned would have you believe, this is not the case.

  OK, so take for example this soil moisture probe. It displays 0 to 3 volts and costs $30. So now we need a way to measure the voltage and send blood pressure data to a computer. We use USB. This thing right here will do the job and then some, for only $50, and is compatible with LabVIEW. My point is - LabVIEW is compatible with the device that ultimately connects to the computer - the sensor is simply a device of voltage output.

  I am not affiliated with or endorse I receommend or two devices, I've linked to, they were simply the result of a 10 second google search.

• Thunderbolt 2.0 is backward compatible with thunderbolt 1.0

  I have a 2011 iMac which I believe has a thunderbolt 1.0 port. Thunderbolt 2.0 works with this port as well?

  Yes. Devices and lightning 2 connectors are retro-compatible with Thunderbolt 1. Obviously, you will have all the benefits of speed T2.

• Microsoft Office 2011 Mac is compatible with OS Sierra

  I'm still on Microsoft Office for Mac 2011 on iMac.

  Ask yourself if this version is compatible with OS Sierra?

  It is, but you may have to reinstall (MS Office don't like upgrades of a large part of the time)

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• Is compatible with quicken sierra 2007?

  Is compatible with quicken sierra 2007?

  N ° you will need to upgrade Quicken to its latest version.

• IOS 10 is compatible with iTunes 12.2.2?

  My MacBook is old, and the last Mac OS can I run 10.7, which means that the last version of iTunes that I can run is 12.2.2. This allows to work with my iPad without problem from the Air, but never worked with my iPhone IS initially provided with iOS 9.

  The iPad don't often synchronize with my MacBook as it backs up from iCloud, but I wanted to put a few audio tracks on it. I tried today and it does not work. I get an error message "iTunes could not connect to the iPad" * iPad "because an invalid response was received from the device."

  I get the same messages with my iPhone SE. My guess now is the iOS 10 did update my MacBook even more obsolete by not being able to sync with my iPad. I searched around and can't find any configuration required for iTunes for iOS 10, so I'm not 100% it is the case.

  Is there any solution for this? Or is my correct guess, that iOS 10 is not compatible with iTunes 12.2.2?

  In addition, if it is not compatible, if someone has a solution of how to get music from my MacBook on my iPad (I noticed Amazon Music allows me to download tracks and then download them on my iPad, but with a limit) then I would appreciate if you could share!

  Thank you

  I'm afraid you're right. IOS10 requires iTuses 12.5

  As workaround solutions, I'm sorry, I don't have. I'm not a mac I have sync music on.

  But maybe someone else can help you

• How to download IOS, which is said to not be compatible with this computer

  I have IOS 10.7.5 I ordered IOS Mountain Lion, when I try to download it says that it is not compatible with my computer and will not download.

  I would like to still be able to have the IOS on an external drive, how I work around this problem to download the software.

  Thank you

  How old is your Mac? Are you sure if your machine is not compatible with this OS X it can be used on your Mac?

• is - a mc at the beginning of 2008 pro compatible with sierra?

  is - a mc at the beginning of 2008 pro compatible with sierra?

  After no.

  https://www.Apple.com/MacOS/how-to-upgrade/

  "Mac Pro (mid-2010 or more recent).

• CS3 is compatible with macOS Sierra?

  CS3 is compatible with macOS Sierra?

  Photoshop CS3 works as well as it did for me with El Capitan with Sierra.  There may be some features that don't work, but none that I use.

  However, it must download and apply the installer of Java for OS X 2015-001 before PS work.

  

• How I check my Mac, applications are compatible with the Sierra?

  How can I ensure that my Mac, applications are compatible with Sierra FRONT update?

  I read that some applications may not work more on macOS Sierra abandoned because of the garbage man.  Only thing I found was to use the command terminal otool - oV Applications/PROGRAMMNAME.app/Contents/MacOS/PROGRAMMNAME | tail - 3 to verify an application but I'd have to type that in hundreds of applications - is not good.

  You can see http://roaringapps.com/apps?platform=osx.

  If you want to check your applications manually, you can run this AppleScript:

  paragraphs of the allApps value (the shell script ' find/Applications / - name \"*.app\ '-maxdepth 2 |" ") SED EI \"s/\\(.*\\)\\/\\([^\\/]*\\).app/\\2/g\" ")

  Set compatibleApps to {}

  Set incompatibleApps to {}

  Repeat with PAP in allApps

  set this to the script ' otool - oV "shell & city form of (' / Applications /" PAP ".app/Contents/MacOS/" & PAP) & "|" tail - 3"

  If this contains "OBJC_IMAGE_SUPPORTS_GC" then

  Copy at the end of incompatibleApps PAP

  on the other

  Copy at the end of compatibleApps PAP

  end if

  end repeat

  -If you want a dialog box to view the compatible/incompatible applications

  compatibleString the value «»

  incompatibleString the value «»

  Repeat with theItem in compatibleApps

  "the value compatibleString compatibleString & item &"

  "

  end repeat

  Repeat with theItem in incompatibleApps

  "the value incompatibleString incompatibleString & item &"

  "

  end repeat

  Tell me to display the dialog box "compatible apps:

  "& compatibleString

  Tell me to display the dialog box "incompatible apps:

  "& incompatibleString

• Is the iPad compatible with iOS 10 3rd generation?

  Is the iPad compatible with iOS 10 3rd generation? I want to upgrade, mainly using the new maps application. I saw some sites state that it is possible to upgrade a 3rd gen iPad. If not, is there a way to download just the Maps app.

  Thank you

  Lou

  Yes, the 3 gen iPad is compatible with iOS 10. You can update.