iPod Classic FREEZES up

I have and have had several classic iPod.  I started with the 40G iPod with click wheel and I think I'm going on my fifth 160G iPod Classic.  I currently own a 160G iPod Classic, iPhone G 128, 6 +, an 80G Classic iPod, iPod Touch 64G and an iPod 30G classic.  I prefer the classic because the commands work much better when I play Pac Man or Ms. Pac Man and, unfortunately, they abandoned the classics, but this is not the issue.

That being said, has anyone who never really understood the limits of the iLod classic?  What are the causes of accident/gel top/restart and why haven't there been resolved yet?

Please note: I want only responses from people who have experienced this problem or people who can extrapolate the information of what they are reading and not get hung up on the details of a minute on something that has been said somewhere that they think must be corrected, especially if it has been used as an example.

There are too many people who think that when you say you bought a 160G iPod and you want to be able to put 160G of music on what you really think you can exceed the limits of training and put 160G of music on it, rather than allow the loss of usual about 10 percent of the space, AND then there are people who think that when you say something like «» "IF I put 10 000 one minute songs about it" I did "10,000 SONGS a MINUTE."  Some people are ridiculous.

P.S. I use Windows from XP all the way up to Windows 8 and the vast majority of my songs is recorded as MP3 as opposed to Apple's AAC format, as I can finally decides to move away from means of control and manipulation of Apple.  Finally, I have over 70 k songs in my iTunes - most account which I personally converted CD purchased in the store with the most difficult to find songs from iTunes Store, when it is absolutely necessary.

Anyway, please discuss:

See Re: corrupted iPod classic.

TT2

Tags: iPod

Similar Questions

  • iTunes freezes when iPod Classic is connected

    Today, I put music on my iPod Classic 160 gb... the files transferred and I just change some information in iTunes at the same time and iTunes froze and then I had to reboot the computer... now two things happen:

    1. the music on my iPod has been cleared of her. All my music is still on my computer/iTunes works fine

    2. when I connect the classic iPod to my computer, rather than recognize the device and let me put music on the iPod, iTunes hangs and I have to force it quit.

    The iPod appears in the Finder as a connected device, but iTunes implode everytime I connect the iPod. Help?

    Edit: Just went to the part of the iPod... on the second screen it says 81.5 used Go, 67.3 'About' free... and then below that under songs and artists etc it says just 0. If something hit irrelevant... is there a way to format just the iPod without using iTunes to do?

    See Re: corrupted iPod classic. What are the stats from HARD drive?

    TT2

  • IPod Classic 160 GB freezes Itunes when connected

    I plugged my Ipod classic to my laptop to synchronize with Itunes and it went through all the processes as usual except at the end he came with an error message saying that the synchronization has failed. I retried the sync and got the same message. I unplugged the Ipod to see it wiped all content except the games. This laptop is configured to synchronize with the original computer. When I plug the Ipod in it now it sends ITunes in a mode of constantly trying to connect and says it is connected to the screen, but when you check the PC it says that itunes does not. The image of the Ipod appears in the top corner but everything is blocked, you cannot click on anything whatsoever or to scroll at all. Once the cursor sitting there in the way of thinking for 20 minutes and then came with this message.

    Unfortunately I can't ITunes to answer so I can not even the Summary tab to restore. Any help would be greatly appreciated I have to travel in two days and really want to go with. Thanks in advance.

    See Re: corrupted iPod classic. What are the stats from HARD drive?

    TT2

  • iPod Classic not recognized whan connected to iTunes and related issues

    Whenever I connect my iPod classic to iTunes (Windows 10) is not recognized. iTunes then freezes after awhile of trying, it is recognized by iTunes. You can see everything on the iPod, but you cannot synchronize. Then I have to restore the iPod, but you can not recharge music etc. as the sync box has been ticked in the recent update. Then you can charge all your music which takes about 8 hours. WHY! Is this because Apple won't use their classic iPod more or what.

    See corrupted iPod Classic. What are the stats from HARD drive?

    TT2

  • iPod Classic Toyota Camry reading questions

    Recently, I traded in my 2012 Toyota Camry hybrid for a Toyota Camry hybrid from 2016.  In my old Camry I could recharge my iPod Classic while listening on the usb port.  In the version of 2016 of the Toyota Camry, the unit, no fees, but it also constantly freezes.  Is there something I can do to fix this?

    I rent cars often and I plugged my iPod Classic on a lot of different cars and it works fine.  The only time where I had problems with my iPod Classic is in my Camry from 2016.  Help, please.

    You should consult the user guide for the car audio system, to check the list of supported devices.

    NOTE: In systems modern car audio the connected device is as a storage for the files of the song.  Car audio system made the song played, by accessing the iPod as a storage device.  The iPod is not playing through the car audio system.  The iPod performs the same function as a USB at low prices with records of songs, when it is connected to the USB port on the car's audio system.

    If you haven't already, do a Reset (reboot) on the iPod.

    Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

    If this does not help, in case there is alteration of the data on the iPod that causes the problem of 'freeze' when the car audio system tries to access the iPod as a storage device, you can do a restore of the iPod using iTunes.  This erases the iPod, reinstall its software and sets it to the default settings.

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  • Problems with my iPod classic

    Hello, I have a 160 GB, 6th generation iPod classic yesterday still put some new music on my iPod and I noticed my iTunes starts trolling once or twice. When I eject my iPod, all my music, including new music had disappeared. I am currently on Windows 10 and with the latest version of iTunes (there is no other updates for iTunes). I did a few resets (by pressing the middle button and the menu button) in the hope that my music coming back (the only reason I did it is because something similar happened before and do the reset as magically worked to recover all my music) but it does unfortunately not this time. A few hours later my iPod was in the form of logo of Apple and kept free reset and did not go beyond the screen of the Apple logo. I tried to do the diagnostic mode and that has not worked. I also put my iPod mode disc and my computer felt that my iPod was plugged, but iTunes was not opening. When I had iTunes open and tried to connect my iPod (in disc mode) it begins to freeze. Whenever I have my iPod is connected without being in disk mode, it keeps resetting and showing the same Apple logo, screen is grey when plugged in and light when it is not plugged. I even let my iPod die by continuous reset, but that did not help. I even tried to format hoping to restore through iTunes but that didn't work. So now I don't know what to do because it keeps resetting and will not past the Apple logo and iTunes is not picking it up.

    Thank you for your time, and if anyone can give any help that would be very appreciated...

    See Re: corrupted iPod classic. You can get access to the HARD drive stats, and if so what are they?

    TT2

  • IPod Classic - playback will stop when you navigate using buttons

    From about three days ago, my iPod Classic is freezing up during playback when I press one of the buttons is to say. back, fast forward, etc. or scrolling. He continues again in the same place, but I'm of course worried that this may lead to a bigger problem, any help would be much appreciated, thanks

    K

    Do a Reset (reboot) on the iPod, if you have not already

    Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

    If the iPod is still not working properly, it may want to make a Restore using iTunes.  This erases the iPod, reinstall its software and sets it to the default settings.

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

    After the restoration and re-synchronization, if the problem recurs, it may be a hardware problem on the iPod.

  • need stop synchronization before finishing to avoid ipod classic remove

    I've updated to itunes version 12.5.1, as well as Windows 10.  If I let my ipod classic finish syncing, everything on the ipod is removed.  So I have to restore the ipod in disk mode so that itunes recognizes the ipod and avoid itunes gel settings.  I found the only way to keep my music is to stop synchronization before it ends or the entire contents of the ipod is removed, and I'll have to go through the process of restoring ipod to factory settings again.  During synchronization, I disable the Windows 10 firewall and anti virus as Apple support told me that it could interfere with itunes.  What is - this with the finishing of sync that removes my ipod?

    It's weird...  Hard drive it is possible to the iPod becomes unreliable and is damaged during the synchronization process.  What happens if you set it up to only synchronize a small number of songs, instead of "all"?  For example, on the settings screen of music from iPod in iTunes, rather than choose to synchronize the entire musical library, choose the option to synchronize playlists, artists, albums, and genres, and select only a SINGLE album.  These songs always get deleted at the end of synchronization?

  • Can I use the search feature to locate my ipod classic (stolen)?

    My ipod classic (I have the serial number) that I bought in 2007, was stolen from my room, Marriott Seattle Waterfront.  Can I use find it my ipod have a this old?

    N ° this feature works only with Apple iOS (iPhone, iPad and iPod touch) devices that have a direct connection to the Internet.

  • I have a iPod Classic 30 GB. I have a new macbook pro and I managed to put my iPod, but now I can't synchronize my iTunes to iPod. What should I do next?

    iPod Classic does not sync with iTunes on MacBook Pro.

    If "reset" means you did a restore on it (to erase it), after the restoration, the iPod is set by default to use the parameter manually manage music and videos] .  If you expect not to sync automatically, you need to Sync music.

    Connect iPod and to find his button on the device to iTunes.  The screenshot below shows the left upper corner of the window of my iTunes, iPod button circled in red.

    Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side, in the sidebar, under settings, click on music.  Parameters of music from the iPod screen to the right.  Check the box to Sync music.

    NOTE: For anyone else reading this, all the songs of the iPod that are not in your iTunes library will be lost.

    This enables automatic synchronization.  You can choose to synchronize your entire music library or a part of the selection .  Implement this screen as you want, and then click apply to sync iPod.  Further, iTunes automatically keeps iPod "in phase" with the changes in your music library (or the selected part of it), when you connect the iPod (or click sync , if already connected).

    If this isn't the problem, thanks for posting back with additional details about your situation.

  • iPod Classic does not appear in iTunes

    My macbook release 10.9.5. iTunes (version 12.1) does not recognize my iPod classic Model # MB147LL version 1.2.2PC. I tried to reboot, reset, update, but it will not recognize to sync the iPod. My computer recognizes the iPod but not iTunes.

    The latest version of iTunes (12.5.1) should work on OS X 10.9.5.  Is there a reason that you are using an older version of iTunes.  A classic iPod should work with even older versions of iTunes, but there may be a problem with the specific version you have (fixed in a later version).

    If update does not help (or if you don't want to update iTunes), given that the iPod is recognized by the system, it seems to have a data connection.  Try to put the iPod in Disk Mode.

    How to put your iPod in disc - Apple Support mode

    Before you connect iPod, stop (power off) MacBook and disconnect all the USB devices.  Plug the MacBook power adapter (so it does not work on battery).  Startup MacBook, launch iTunes and connect the iPod (in disc Mode) on a USB direct on MacBook, by himself.

    If he picks up iTunes, it should invite you to do a restore with a message on the "recovery."  This erases the iPod, so if you're OK with that (because the content of the iPod is in your iTunes library), do the restore.  If all goes well, the iPod appears in iTunes (normally) after the restoration.

  • I called Amazon to try to recover the serial number of my old iPod classic two weeks ago, and they gave me a kind of account; They pronounce it account 'seen - It '.

    I called Amazon to try to recover the serial number of my old iPod classic two weeks ago, and they gave me a kind of account; They pronounce it account 'seen - It '. I don't have to ask how, because I thought I knew, but I was wrong. Would what type of account be? And how it's spelled? The name of the account is a tiny s followed a 7-digit number. (Of course I will not type the numbers.)

    I would go to a forum for Amazon, because they can be better equipped to answer a question on their system. If synchronize you the device with iTunes, the number can be there in the backup section.  Find the serial number of your Apple - Apple Support product

  • IPod Classic compatible with EU Boom 2 via the Jack audio 3.5 mm?

    As far as I know, the sixth Gen iPod Classic should, theoretically, work with the EU Boom 2 via 3.5 mm audio cable "male-male". Can anyone confirm their experience that this is the case?

    I have no experience with that specific product, but if it has a standard (cable) analog audio input auxiliary iPod headphones (and more), is a standard analog audio output.

  • My iPod Classic is not synchronized

    My iPod Classic will not sync with my shiny new iMac, why?

    My Shuffle, it's what's happening? Why should it be so difficult?

    I allowed off my old iMac for iTunes.

    Even if your Mac is new, check if there is an iTunes update available.

    Open the App Store, and then select the updates menu.

  • Where can I find the latest version of the software to download on my iPod Classic 160 GB end of 2009?

    Where can I find to download the latest version of the software for my iPod Classic (160GB end 2009)?

    I'm still enough of a novice at this and would like to, if possible, a detailed response. Really appreciate it.

    Thank you

    Mando

    Click here and follow the instructions. The entire process is managed within iTunes. you don't need to search for the download.

    (144457)

Maybe you are looking for

  • Wharton are MediaDownloader.bundle more other files

    I found a file named MediaDownloadKit inside the Application Support folder. Inside this folder are aLogs with tons of files, folder packages 50 or more cases like 1.0.12 containing the MediaDowloader.bundle. Folder favorite icons, logos and vignette

  • Windows 10 sleep and shut down problem bootcamp

    Hi can you please help me I am running windows 10 pro 64-bit os, generation 10586.71 on my I mac end 2012 27 inches When I stopped my connected USB device which has a led indicator remains steady. I think it means that it is not turned off properly.

  • Configuration of the keyboard

    Hello Lenovo community, After looking on google and on this forum and not being not able to find the answer, I decided to ask for your help. Yesterday, I received my Lenovo Y510p and it works well, however, the configuration of the page layout is the

  • forgotten password access Manager

    I forgot the password for the Access Manager & cant get online

  • How can I check an increasing rate

    I want to check a frequency which increases. If it exceeds 2000 I want to capture immediately, but if it does not exceed 2000 for 12 seconds, I want to enter anything at that time here. Attached is a VI that accomplishes that, I wrote, but I used a l