iPod Shuffle 2 g does not not with 10.11

Similar Questions

• IPod Shuffle Gen 2 will not load.

  I pod shuffle 2 generation does not load. Light does not illuminate. May be time for a new or repaired.

  You use the USB cable supplied with the shuffle.  For a 2nd gen shuffle, this cable is long with a cradle for the shuffle.  A cable for 3rd/4th gen shuffle does not work with 2nd gen shuffle (connector is different).

  If you use the right cable, but the random reading light lights at all, the cable may be defective.  There is cable of third party replacements.  If you want to try another cable, make sure it is described as being 2nd generation Shuffle (not 3rd/4th generation).  For example, some are not actually cables

  http://www.Amazon.com/adapter-Apple-iPod-shuffle-generation/DP/B000QHOB4S

  It is also possible that the shuffle is defective.  I think that the shuffle would always turn on when connected to power, if the problem is with the battery.  So it is something else, like a worn or damaged headphone jack.  Or bad logic board.

  Whatever you do, don't forget that a 4th gen new shuffle with a new helmet, docking cable, and the guarantee of one year is $ 49 retail.

• Why iPod nano 7th generation does not support Khmer language? New update for this problem please Apple release?

  Why iPod nano 7th generation does not support Khmer language with the latest version 1.1.1? Apple could release a new update for this problem?

  I am from Cambodia, I love Apple products, so I need Khmer language with all Apple devices!

  Thank you!

  For Apple to see your application, you should repost it to

  http://www.Apple.com/feedback

• iPod shuffle 2nd generation will not be a link with itunes

  I just brought a used ipod shuffle 2nd generation and I can't seem to associate with my itunes account dosnt see toward the top in the list of devices? It binds with laptop and with the car but can't put mt on her music and her full load of expensive! and bon Jovi show!

  any advice will be welcome tried alternative lead? Potty

  Cheap and good jovi...  That IS indeed a serious problem.    But at least the iPod still plays music, so its battery is OK.

  You use the USB cable supplied with 2nd gen iPod?  It is long with a cradle at the end of the shuffle.  The replacement of home cable shuffle Apple sells currently is to shuffle 3rd and 4th generation and does not work with 2nd gen shuffle (connector is different).

  There are third party replacement cables, but they must be described as 2nd gen shuffle.  And they tend to be cheap and of poor quality, then this might be the problem here.

  If you have the right type of cable, when you connect it to the USB of your computer, look at the little light the shuffle.  Blink initially when it is connected?  It turn on, but remain solid (not flashing)?  There is No light at all when connected?

  Also, are you using a Mac or a Windows PC?  If Windows, which free?

• iPod touch 5th generation does not illuminate.

  I got this iPod since the end of 2013. The home button has stopped working for a period of one month. Last night my battery was sufficient to last for several more hours, my iPod worked perfectly well. Then when I go to check this morning, it does not work. Not at all. When I tried to look it up on the way to solve the problem on Apple support, someone explained how try restarting it through the power and the "home" button. However, even once my home button does not work. I tried holding down the power button, then pressed on and even once tried to plug it into the charger to the wall, he still won't turn. Another user said try to connect to Itunes to see if I can restore it, ultimately, it failed for the fact that Itunes does not recognize it. I could really use some help.

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• I just spent an hour to compose a response in a thread ("Firefox does not with paypal"), only to see "You do not have permission" to submit - total loss!

  I was connected to respond in the thread "Firefox does not work with paypal. I spent the best part of an hour carefully compose this response, case tests, links, etc... [Tip: Firefox, unlike other browsers, has a problem with the server paypalobjects.comscripts.] Because I had taken so long to write the answer, she seemed to be a good idea to check in via the Preview button, but I received a message that the service was not available. Of course, I decided to submit it anyway, but when I hit 'submit' I got a message "you don't have permission...". "- at which point I (stupidly) on another page with this message, and what I wrote was gone!

  Anyway, it is definitely not normal that the site log out after only an hour. Sorry to hear about this. Maybe there was a little problem on the server with your session. If it is reproducible, I wonder if you have any software that could be quietly elimination of cookies for the inactive sites?

• my ipod touch 6th generation does not load and the symbol not load does not appear. I tried switching cables.i have also tried pressing home and turn on the button for 20 sec... but nothing does. Help, please

  my ipod does not work I tried everything, but he continues to refuse to work. It's only a few weeks. nothing seems to be damaged. the symbol not charge also refuses to come. I think he's dead, I need help badly

  Connect to iTunes & restoration

  Thin I your device is in Recovery Mode so the only way is restoring iOS

  If iTunes does not identify your device does take to Apple

• Satellite Pro 2100 - works does not with 2 sticks of RAM

  Hi all

  I've been with sticks of 2 x 512 MB RAM from a reliable supplier that reassures me that this RAM is compatible with the SP2100 laptop.

  With the two sticks installed, as soon as the machine is running, I get no display and 5 beeps (1 long, a follow-up of 4 short beeps). Each stick of RAM work well individually, and I also tested slot A and b. Thus, the 2 sticks of RAM are working alone and work the two slots. It seems that this machine has a problem with 2 sticks of RAM.

  The ACPI BIOS is up to date (v1.40). I also tried the old 256 MB stick with one of the new sticks of 512 MB - same problem. I tried this as the supplier of memory mentioned this Toshiba may take only 1 GB maximum.

  Any ideas why two sticks of RAM does not work?

  Thanks in advance and amicably.

  James

  Hello

  You are right. The laptop must be able to manage memory 1024Mo. (2 x 512 MB)
  Due to your description, I think that both modules are compatible, but cannot play together.
  In my opinion, you should use two modules with the same specifications

  Try to use the modules recommended by Toshiba;
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• I have a MBP Late 2013 will pair does not with 6s on Blutooth

  Read all comments (lots of old stuff on these communities) and tried all the suggestions of trashing the plist etc etc. Still unable to get my iPhone 6s to pair with my MBP end 2013.

  For a fleeting moment after that match it says connected not connected appears.

  AirDrop works, but my phone does not appear on the screen of the devices. If sending photos of the iPhone works well my avatar is not displayed as sender just my intials & where ever he gets the ints info not the name I use in my Contacts.

  Someone at - it any idea what is happening. This worked OK until recently.

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

• Apple iPod touch (3rd generation) does not detect

  Every time I plug my iPod windows media player doesn't recognize that something's there.

  Hello

  Windows Media Player does not detect the Apple ipod, it would be best to contact Apple and try to install itunes and check if this may help.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the information is useful.

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com

• Audio fun does not with animation

  I think it must have something to do with the audio being does not correctly placed on the timeline, but I think I do everything that the directions said. When I put audio in the timeline, it will play the audio from the beginning, but if I stop the audio and try to play a place randomly in the Middle, it won't play anything. How can I fix so the audio will play anywhere in the animation, not only at the beginning?

  If you publish a swf file, use stream to sync the sound, no event property.

• JDBC connection does not with ORA-12514

  Hi all

  I also have problems with the connection to the DB CARS because the listener does not recognize the name of the service. I read many messages from the forum itself here and elsewhere and I just can't understand it. Everything seems in order, so I'm a little confused as to why it does not work.

  Thus, some specifications: I actually use SAP as advanced application to connect to the DB.

  DB is RAC 11203, two nodes.

  OS: Linux RH6

  Headphones and remote headphones are a race to the top.

  JDBC connection string fails:

  JDBC:Oracle:Thin:@(Description=(Address=(Protocol=TCP)(Host=virtualhost1)(port=1527))(Address=(Protocol=TCP)(Host=virtualhost2)(port=1527)) (CONNECT_DATA = (SERVICE_NAME = MYSERVICENAME. «"" WORLD)))»»»

  I check that the service is available in the cluster:

  ORA. < dbname >. myServiceName.svc online on physicalhostname1

  When I check the status of the listener on node1 he mentions the MYSERVICENAME downstairs so it's here

  [oracle@physicalhost1 bin] $ lsnrctl serv < DBNAME >. WORLD

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 2013-SEP-07 16:43:11

  Copyright (c) 1991, 2011, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (SDU = 32768) (ADDRESS = (= SAP COMMUNITY. (World) (Protocol = TCP (port = 1527))(Host=virtualhost1)) (LOAD_BALANCE = OFF)(Failover=on) (CONNECT_DATA = (GLOBAL_NAME = < DBNAME >. WORLD) (SERVICE_NAME = < DBNAME >. «"" WORLD)))»»»
  Summary of services...
  Service '< DBNAME >' has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 001 "has 2 occurrences.
  Instance ' < DBNAME > 001 ', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 002 "a 2 occurrences.
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Instance ' < DBNAME > 002 ", status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Service "MYSERVICENAME" has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  The command completed successfully

  When I check the node database in sqlplus

  SQL > show the service_name parameter

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  service name string < DBNAME > 002, < DBNAME > 001, < DBNAME >, myservicename

  That's where. The database is running.

  I am spent days on this and I am unable to understand. I tried to re - register the name of service to SIR with lowercase, uppercase. In fact, when I joined the service I used capital letters, do not know why crsstat it shows always lowercase. Also in sqlplus I see lowercase. I do know that if it's case sensitive at all, but shows the despair that I really tried everything. I think that the fact that I am using SAP is not serious as long as any application - what is uses the thin JDBC connection string.

  Help, please.

  Your JDBC connection string requires a service MYSERVICENAME. WORLD, it should be MYSERVICENAME.

• Solution for "Spooler service does not" with printers HP F4480 all-in-one.

  If you receive the prompt that says: "cannot install or print due to 'queue service does not work', here is a simple solution.»

  GO to the start menu and click on 'run '.

  Type CMD, and then click OK

  Type in the box that appears, "net start spooler" and click ENTER.

  NOTE: Without quotes and spaces between net start spooler.

  The box invites you... spooler is now in service.  The printer should now work correctly.

  Great information.

• Distributed form works does not with hotmail or gmail

  Sorry, if this is in the wrong place, but desperate to find an answer. (This form is about to circulate among a few hundred grade 12 students, who will have a wide range of messaging options.  We have students do not have difficulties to send this form)

  I have a form, distributed, sent people to fill out the form (test first) and submit.  Which I will collect in the entering e-mail response file.

  
  Some fill out the form, send, he calls the window to use gmail, hotmail or office.  They select Office/outlook sends exactly according to the needs. Excellent.
  
  But from time to time, it does not yet give the possibility for the Office or hotmail, it automatically changes to outlook.  Which I think would be OK, if the student is on their home computer and want to send it like that. (but eventually will be their parents email)

  For those who are informed on a school computer and want to use hotmail/gmail.  several problems occur...
  Once they choose the choice of hotmail/gmail, the process does not continue.  Everything seems to disappear, and the form is never received by the expected collector. Never turns in the gmail/hotmail sent file.
  
  One person said, they thought that it went through the process... but the collector never received.
  
  One person said, it doesn't give them the choice... it automatically opens outlook, even if they would have used hotmail instead.
  

  I suspect that most of the students would use a hotmail/gmail account to send the form.

  It's the form, we have created, http://www.SD22.BC.ca/forms/Scholarship_Application_Final_distributed.PDF  

  If it helps to understand what is happening... appreciate anyone taking a peek, even try to present.  Just write on her test, so that we know.

  We are trying to get this ready for the end of February.

  Perhaps recognizing the help... This should be posted on another forum as well. ?

  Total egg on my face.  The people who described the problem for me, left aside the fact that they did not actually read the pop up window that came when they hit the submit button.

  This explains, so why no one really had an answer for me.  The popup window, when you choose 'internet' option indicates clearly that we must save, then fix on the mail program they choose.

  My apologies, there...

  But he did raise the small problem, if someone check marking the 'don't show this'... could cause problems.