IPS-4240 Sig Update License

Similar Questions

• IPS-4240 engine upgradation procedure of E3 E4

  Hi all

  Can someone help me to upgrade the IPS 6.0 (1) 7.0 E1 (2) E4.

  What are the images need to be upgraded for this?

  What is the appropriate procedure for upgradation?

  Here is the version for your reference results show...

  ========================================

  Cisco IPS #.

  Cisco-IPS # sh ver
  Application partition:

  Cisco Intrusion Prevention System, Version 1.0000 E3

  Host:
  Domain keys key1.0
  Definition of signature:
  Update of the signing S479.0 2010-03-19
  Virus update V1.4 2007-03-02
  OS version: 2.4.30 - IDS-smp-bigphys
  Platform: IPS-4240-K9
  Serial number: JMX1244L0PK
  License expires: December 31, 2010 UTC
  Sensor time is 211 days.
  With the help of 1439252480 of 1984552960 memory available bytes (72% of use)
  the application data uses 44.0 M off 166,8 M bytes of disk space available (28% of use)
  startup is using 39.7 M off 68.6 M bytes of disk space available (61% of use)

  MainApp to E-2008_OCT_16_16_24 (release) 2008-10-16 T 16: 40:57 - 0500 Running
  AnalysisEngine-E-2008_OCT_16_16_24 (release) 2008-10-16 T 16: 40:57 - 0500 Running
  CLI-E-2008_OCT_16_16_24 (release) 2008-10-16 T 16: 40:57 - 0500

  Upgrade history:

  * IPS - GIS - S465 - req - E3 23:00:43 UTC Thursday, January 28, 2010
  IPS-GIS-S479-req - E3.pkg 00:05:37 UTC Wednesday, April 7, 2010

  Version 1.1 - 1, 0000 E3 recovery partition

  Valid certificate from the host: November 17, 2008 to November 18, 2010

  Cisco IPS #.

  Cisco IPS #.

  =================================

  Kind regards

  Anuj Pratap

  No, do not reimage system (IPS-4240-K9-sys-1.1-a-7.0-2-E4.img), which would eliminate all of your configuration.

  Just perform the upgrade using this upgrade file: IPS-K9-7, 0-2 - E4.pkgand which would automatically be updated to 7.0.2 (E4).

• The Upgrade Version of the engine on IPS-4240

  Hello

  I'm running a sensor IPS 4240 with engine Version 7.0 (1) E3 and the sensor will always have a strong canvassing from 97 to 98%. It's recommended to update the sensor to the latest version of the engine, considering the amount of load top right now?

  Thank you

  Kiran

  Hi Kiran,

  You need to update the engine at it, since you cannot use the latest signature definitions without being on the latest engine.  As long as you don't see packets ignored at the level of the interface of detection, it is fine for the use of the CPU which is high.  If you start to see rejected the packages that you need to reduce the amount of traffic being sent to the probe or reduce (by clearing and retreating) the number of signatures inspection of the traffic on the sensor.

  Best regards

  Justin

• Not entirely taken TLS supported in Cisco IPS 4240

  I am trying to contact a Cisco IPS 4240 device while having security settings FIPS enabled on the client using SSL. This is not possible because the device does not support TLS extensions in the Client Hello packet (RFC 5746) sent by the client when using TLS (SSL3 and lower are not FIPS compatible). The IDM application that communicates with the device does not send these extensions (im seeing this with WireShark) TLS is able to connect to it.

  Is it possible to provide the 4240 support these TLS extensions?

  This is related to the bugs below.  The original solution will be included in the 7.1.5 release which is preparing to take in charge the platform 4240 among others.  This will allow the Web server IPS to ignore short-term extensions.  The long-term solution will require an update to the Web server so that it is fully compliant with RFC 5746.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtt18382

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx43502

  Todd

• IPS 4240 - additional card

  Hello

  Does anyone know, when will be available 4xFE cards for IPS-4240 (for total 8 interfaces)?

  Kind regards

  Krzysztof

  The option card for IPS-4240/4255 sensors will be a card 4GE to support copper (RJ45) and fiber (SX) connections. It will allow a total of 8 RJ45 interfaces or 4 SX fiber interfaces (and 4 RJ45 interfaces) on these platforms. Unfortunately, it will be probably available for another 9 months or more.

• IPS-4240 design question

  I have two IPS 4240 s that can be placed between our internal network and our extranet firewall. The game of firewall is your pair of standard assets/ASA-5520 switch connected to both switches.

  Q1 - if I'm not worried about atomic attacks, is there another advantage that IPS inline on promiscuity?

  Is Q2 - If inline or promiscuity, necessary to connect the unique IPS for two switches in order to receive packets when a failover of the SAA occurs? If so, does physically or through RSPAN?

  Q3 - if the IPS fails and it is set online, interfaces fail open (traffic continues to pass) or closed (traffic is removed)? I couldn't find that on the Cisco site.

  Thank you!

  "Promiscuous" mode, you can use a 4240 and extend the output of each switch in two interfaces of remote sensing of the 4240 (it has four available). A single 4240 should even be able to set up TCP sessions that span the two rails, as in the case of a failover.

• Deployment of Cisco IPS 4240 devices

  I can't find all the information about the Cisco IPS 4240 features massive deployments. I have 6 devices, I intend to drive to several remote sites and tie in a centralized unit of Cisco MARCH. Without the help of any CSM/LMS software, is there a quick and dirty to pull this off? I think to set up a single IPS appliance, then pull and distribute the configuration file for the remaining devices. I would like to see how others have done this...

  If all of your sensors are of the same type (all 4240 to your situation) and will execute all the even correct configuration, then the copy command will help out you.

  There is a new feature added to the copy command in IPS 6.1 which will help you during the copying of config of one sensor to another.

  Complete you configure a sensor (using IME, IDM or CLI). When you are satisfied with the configuration, and then use the command copy to copy ON a server of SCP.

  Now bringup a second sensor and configure basic networking through the Installer settings (ip address, gateway, etc...).

  Now, use the command copy to copy the first configuration of sensors from the SCP server in the running of the second probe configuration on the second.

  It will ask you to change the network settings on the second probe.

  Answer n °

  The rest of the configuration of the probe first copy will be placed in the second sensor.

  The second sensor will keep its own unique IP address but win the rest of the configuration of the config of the first probe.

  Continue to do this with additional sensors.

  The process can then be repeated every time that additional changes are made to the first sensor.

  Remember though that this only works if the configuration of the probe will be exactly duplicated (including what interfaces would be monitored and how).

  If each sensor will have some unique tunings, then you need to manage each sensor on its own or buy CSM which can be used to share only parts of the configuration of multiple sensors.

• IPS-4240 fail open

  Hi all

  I have one unit of IPS-4240. I want to know if my sensor or the unit itself fails / stops, is there an option where in my traffic will be passed so that there is no downtime.

  Thank you

  Pratik

  You can configure the sensor when it is inline with inline-bypass 'auto' mode mode so when the unit does not work, it will just pass through traffic without inspection, however, if the sensor is completely shutdown, then no, the traffic will be dropped when in inline mode.

  Here is more information on derivation inline mode:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_interfaces.html#wp1047079

  However, if she is in promiscious mode, so you don't have to worry about this because the package is not "inline" and will cause no disruption.

  Hope that helps.

• IPS UPDATE LICENSE QUESTION

  Hello

  We have recently updated the contract to get updates for IP addresses, but we get the error message attached when we try to get with the cisco username and password updates that contain the contract.
  someone knows this error?

  Hi El Salvador,

  This error may be the cause of the update contract not completely.

  Have you tried to generate the license manually of cisco.com/go/license file and download even on IPS? Please try it once even.

  There is a way to delete the old license file in the database via the account root and then try again. For this I recommend prosecution with TAC.

  Kind regards

  Akshay Rouanet

• Update license of IPS ASA - SSM

  Hello

  We have an ASA-SSM-20 IPS, the license has expired and we purchased a Smartnet contract for the device.

  I would like to know how to upgrade the license.

  We tried to do the ASDM, and chose the option updates to cisco.com.we got the following error.

  internal error. Unable to send the license request. -4: unable to proxy transparent tunnel. Proxy returns "HTTP/1.1 403 Forbidden.

  How to solve this problem or how to do when you use the other option, how to get the license file.

  Best regards

  It seems that your AIP-SSM20 is configured to use an http proxy to connect to the Internet. If you allow the IP address of the AIP-SSM20 management in your web proxy, it may solve your problem.

  If this isn't the issue, you can always apply a license manually. Download your license file here:

  https://Tools.Cisco.com/swift/LicensingUI/home

  and apply via the ASDM or the CLI

  -Bob

• NWZ-s544 updated license information

  On the 5 weeks, I had this camera, I learned only to use it for 2 weeks. Whenever I try to play my music a box appears and says "can NOT PLAY. PLEASE CONNECT TO in accordance with THE SOFTWARE LICENSE INFORMATION AND updated"I registered the product and whenever I tried to navigate this site I like it is under construction. why it does this and WHERE I updated THE LICENSE INFORMATION for I can use it again?

  Thank you for your message.
  This problem can occur if the license for the piece you are trying to play has expired on the device. If you are currently subscribed to a music subscription service, connect the device and the sign on the account to update your license to allow playback. You may need to do this once during each billing period to listen to the music of the subscription you have transferred. If you have subscribed to the service where you downloaded the file, you can delete the song from your player to avoid this error occurs whenever you try to play the song.
  If you need further assistance, please contact our Technical Support team: ... http://esupport.sony.com/US/perl/suppor dl = NWZS544

• Error code 61499 after update license (FPGA)

  Hello

  I am a fairly experienced user of FPGA module.  I have LabVIEW 2009 installed (version 9.0.0) including the FPGA on XP 32-bit module.  Everything worked well and I had a project specific FPGA that had been built and run in the last month or so.

  In the meantime, the license has expired, so I had to update the license.  After update of the license, I made a trivial change in VI (default values has changed some entries to the front) and tried to compile and run.

  This has generated the error-61499, with additional information:

  Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW.

  I looked after error-61499 in LabVIEW FPGA and a few other positions.  I checked the path of compilation of LabVIEW FPGA registry keys and it seems fine (C:\NIFPGA2009\Xilinx\ISE).  This directory exists and is the right size (3.74 GB).  A temporary directory is created in C:\NIFPGA2009\srvrTmp\localhost.  I searched the pearl58.dll file but couldn't find it.

  When I look at the license installed recently and the license has expired in the License Manager NOR, I see no difference between the two other than the expiration date.

  Summary: I had a working facility and the project, updated the license file and now get error-61499.

  ???

  With the help of an Application engineer, I tried two things.

  First of all, I tried to 'fix' the FPGA Module through the "Add or remove programs" utility in Control Panel.  That had no effect.

  Then, I downloaded and installed NOR-RIO 3.3.0 of the support zone, drivers and updates.  That solved the problem!

  So, for someone who has a similar problem in the future, try to reinstall the driver OR RIO.

• Update license page

  Once, when downloading updates, it gave me license on the Windows Update page - during the download.  He's never worked since. I'm not offered the license terms, and the downloads fail. What is the problem? (For this reason, I have to manually download in the microsoft Download Center - which is not too practical.)

  Hi RobKarLat,

  1. during the upgrade install was offered license agreement?

  2. you receive an error message trying to update?

  I suggest that reset you the component of Windows Update and check if you can install the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cisco IPS 4200 Signature Update

  We are currently under evaluation and implementation of the Cisco IPS solution to our security needs.

  Our supplier has said that the signature 'online' updates to Cisco IPS is not possible - this is a manual process and we need to charge the device if you want to update the files.

  Somehow, it defies logic. Surely, I think, that any IP address should have the possibility of obtaining signatures updated "online".

  I apologize, because that question is too basic in nature. But could someone shed more light on this?

  Thank you.

  You have auto update functionality of Cisco IPS version 6.0, take a look at the attached picture.

  Update of signatures is * recommended * that you reload the signatures (restart the sensor), although this is not mandatory.

  Our IPS has not been restarted for over two months now and everything is working ok.

  Automatic update

  Automatic update

  Automatic update

• AIP - SSM 10 Signature Update license?

  Hi every one.we had an AIP - SSM 10 for our asa5520.actually it is bundle asa5520 + AIP-SSM10. (part number ASA5520-AIP10-K9 =)

  (1) I want to know that if we want to improve our signature aip - ssm we get the Services Cisco IPS download signatures or not with this number of pürt we get it too!

  (2) in the case and we must get the Cisco IPS services separately so where can I find a reference number for the services of this?

  (3) what license that must be installed on the sensor activation? If we get the Cisco Services for FPS then we receive license activation for installation on sensor too? or not if not, can we install signatures on a sensor that it has not been activated yet? guess we can get a few signatures how! (I know JOINT-2 we cannot install any license until the license is installed on the sensor.) Thank you

  CON-SU1-AS2A10K9 would be the correct contract to put all the pieces of the boot under the maintenance contract.

  CON-SU1-ASIP10K9, this is what is used when the AIP-SSM-10 are purchased as spare.

  I don't know if yes or no this Service Cisco IPS contract can be used to cover only the AIP-SSM-10 if it was purchased as part of a package instead of a spare part. You will need to ask your reseller or Cisco sales representative.