is 750ti GTX compatible and easily installable in an ATC-705 EB53?
need confirmation. is 750ti GTX compatible and easily installable in an ATC-705 EB53?
live chat was not very helpful. product ID is DTSXNAA028. and the card motherboard intel chipset h81. Thankss!
sak03,
You forgot to enter the exact model of your gtx750ti. There are probably a hundred different gtx 750ti that are different sizes and have different power requirements.
Here are some tips / the general criteria on the question of if a graphics card will work with your tc-705
1. is that it adapted? It is not always easy to determine this. Often the marketing sheet (dimensions) on sites like Amazon is inaccurate. We must look on the manufacturers Web site.
2. your diet has enough power? If you buy a gtx 750ti which requires a power cable 6 pin, then it won't work with your diet.
3. will the UEFI card? (most of the 750ti are UEFI and is therefore your tc-705, then Yes, it should be compatible)
4. do you have a sufficient cooling and ventilation? I don't think that you will have any problem here because the gtx 750 ti is a map of maxwell.
On my TC-605, which has the same motherboard Acer/Intel H81 as your tc-705, but probably another case, I installed a graphics card with the dimensions below and he did, barely, with 2 or 3 millimeters to spare.
Most GTX 750ti requires only power 300 watt and power just pull slot PCIe x 16 motherboard. However, some 750ti GTX also require a 6-pin power cable. Your Acer OEM power isn't a 6-pin power cable.
If ever, you improve your diet, it uses a non modular standard ATX power supply. Most semi-modular power and modular supplys fails in your case because they are a little too big.
You can try searching this forum also.
If I was I'm going to buy a graphics card for your tc-705, I would buy the card (GTX950) in the link below and it must adapt... and it's $109 after rebate. It should also work with your current diet. The dimensions on the amazon website are inaccurate.
https://www.Amazon.com/DP/B01FL6SYZU/ref=psdc_284822_t3_B014VHZ4IU
If for some reason, I needed to upgrade power supply, I would buy the ps in the link below. It is a very good diet.
https://www.Amazon.com/SEASONIC-80plus-ATX12V-supply-SSR-360GP/DP/B008XEYT5M
Important note: ASUS has two gtx 950 minis. One, it takes a 6 pins and we didn't. The map link below does not require a 6 pins and so should work with your current diet.
https://www.Amazon.com/DP/B01FL6SYZU/ref=psdc_284822_t3_B014VHZ4IU
Edit: It is important that you use the Geforce experience to optimize your game settings... IMO.
http://www.GeForce.com/GeForce-experience
Tags: Acer Desktops
Similar Questions
-
I am interested in wiping my own laptop (Microsoft Vista) and the installation of Windows 7 32-bit system manufacturer. Can someone help me with this please? Step by step. Thank you!
Hello
This should help you.
Make sure you save all your data before you start this method, because it will be lost.
And that you remove the existing Partition Vista during this process.
"How to do a clean Windows 7" install
http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Before purchasing Windows 7, follow these steps:
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
See you soon.
-
Im trying to connect to a server on Battlefield 3 as im log on a server I get a message saying: could not initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed. Usually, it is a result of the lack of specific driver of the seller then, how can I fix this problem so that I can play Battlefield 3 new...
Hi Anthany,
If you have a hardware device that does not properly with your computer, you probably need a driver updated. There are three ways to update a driver:
Use Windows Update. You will have to perhaps set Windows Update automatically download and install recommended updates.
Install the software from the manufacturer of the device. For example, if your device is equipped with a disk, this disk can contain software that installs a driver for the device.
Download and update the driver yourself. Use this method to install a driver that you download from the manufacturer's website. If Windows Update can't find a driver for your device and the device didn't come with software that installs a driver.
Step 1: Download and install the latest version of DirectX.
http://support.Microsoft.com/kb/179113
Step 2: Download and install the latest graphics driver and see if it works.
Update a hardware driver that is not working properly(Windows 7)
Good day!
Answer please if you face concerns.
-
I have Adobe Acrobat 7.0 Pro and I just bought a new pc with Windows 8. I can't find a download. Is there 1 or Acrobat 7.0 Pro compatible and if not, is there a suggestion in addition to spend more money on another product? Thank you.
Hello
According to the system requirements for Acrobat pro 7, it is recommended to use it on Windows 8 machines.
However, you can try to install and run using compatibility mode. You can download it from the following link
Download Adobe Acrobat 7 and Adobe Creative Suite 2
Note: as this product activation server is switched off, you will need to use the key to series mentioned next to the link to download during installation.
For compatibility help please refer to make programs more compatible with this version of Windows - Windows help
-
I have a powermac G5 running 10.5.8 that I continued to get a screen telling me to level, which I did, then I was told that it was not compatible, and now I have nothing.
How can I return to my old system or download one that will work. bold text
You can download Firefox here 3.6.xx:
-
A tab open, when I click on a bookmark, the browser IS NOT open it in a new tab. It open in the same tab, replacing the old site.
In FEATURES it says:
«Browse multiple sites at once, simply and easily.» Each new site appears as a new tab.
I wish it would.
Install one or both of these modules.
- https://addons.Mozilla.org/en-us/Firefox/addon/open-link-in-new-tab/
- https://addons.Mozilla.org/en-us/Firefox/addon/open-bookmarks-in-new-tab/
In addition, see How to set the home page which explains how to open several sites such as your homepage.
-
Satellite C850 - where can I get and Win7 installation .iso of?
Hi guys,.
I searched and found a lot of threads, but have not really found a solution.
I bought C850 with Win7-64-home-premium preinstalled for my wife.
First I wanted to decline Microsoft EULA and claim the money for Win7 license, but I thought that his quid of only 50 or 60, and I could the want once a year so I left as what.First impression - its Terrible slowness!
I have an old NB100, Witch of Linux running of Atom and 2 GB of RAM, I use from time to time when I work on the road and this old tiny netbook is faster then my new C850 with i3 and 8 GB of RAM. I mean A LOOOOOT faster.
Then I run Mint Livecd, and then I saw how fast C850 can be if it is given real operating system instead of Microsofts crapware.
Then I installed WIn7-64-professional and there was a BIG difference. This is nowhere near as fast as on Linux Mint, but it's much better then original install.
It was only to check how it happens on a clean install. I don't have a license for Win7-pro for C850 and I don't even have any intention of paying for something as useless as Win7. People should be paid for all the suffering caused by Win7.
On the other hand, I would pay gladly for Linux Mint and in fact I've done a beautiful gift to the project not long :)
Conclusion - the slowdown was casued by Toshiba bloatware (which is not at all necessary for the functioning of the laptop!) and all the other stuff like McAfee or Nero.
I tried to reinstall but him reinstalled Win7 comes with all the bloatware and I need clean install Win7.
To cut short answers like "install and remove unnecessary waths" - which does not solve the problem for two reasons:
(1) to install and remove, many things remain on the system, registry entries, lots of files, etc
(2) I need and .iso of Win7, so I can integrate by little things and get rid of ALL LOT of useless thingsWhere can I purchase and installation .iso of?
I mean clean Win7 without all this bloatware Toshiba, McAfee, Nero and other detritus.
Mind you, I bought a laptop with Win7 license so I have the LEGAL RIGHT to use Win7 on its own.Popular suspicion.
Thank you.
Hello
> Where can I get and .iso installation of?
As much as I know Toshiba does not any clean Windows 7 disk.
You can create a recovery disk using the media recovery disk creator.
You will get the image of Toshiba with Windows 7, drivers, tools and utilities.If you want to install clean Win 7, or you have to buy it from Microsoft or try to download the iso from MS page but I have no idea if the serial at the bottom of the device key would work because this key belongs to the OEM version installed on your laptop.
-
Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?
Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...
-
Driver Ethernet controller and network installation
I am a newbie, please help for the driver Ethernet controller and network installation
product - portable r007tx
OS - window7 64 bit
-> error code realtech controller network not found... If hibernation is enabled, connect the cable
unknown device device info Manager
(1) ethernet controller
PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C & REV_07
PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
(2) network controller
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3290 & CC_028000
PCI\VEN_1814 & DEV_3290 & CC_0280
(3) pci device
PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00
Hello:
First install the Intel chipset driver and restart.
Ethernet controller:
network controller:
PCI device:
-
Original title: I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.
I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story. I'm I did somenthing evil?
Hello
Thanks for posting in the Microsoft Community.
If I understand correctly that you have problems with the installation of Windows Vista Service Pack 1.
Please answer these questions:
It shows in system properties?
To open system properties:
(a) click Start, right click on computer
(b) click on properties
(c) see if it shows Windows Vista with service pack 1 on windows edition.
Hope the helps of information. We know if you need help. We will be happy to help you.
-
I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance
original title: where to find WIndows Poweershell?Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.
-
OK, I know that this may be simple for most, but I have an of a moment _ this find. As I said legal copy that has been saved... I backed up all my files on DVD, I don't care if I lose all the programs that I can always download them later. Basically I want is that it was when I brought home the first time. I searched high and low for the original disc of Vista but no luck. I do not have people upgrade at any time, but I was not able to find a definitive answer about it online. Not too complicate it again but I have 4 GB of ram and processor can run 64-bit, and I have 32-bit curently I'm sure you know where I'm going with that. I know a little about how to do it, but want reasurance and direction from someone who knows hit safe and ready to help. Any person who get end to this nightmare for me will be really appreciated.
Shaun
Contact the manufacturer to obtain a set of recovery discs original (for a fee) and use them to make the initial installation. Activate it. Then you can do the upgrade and activate that. You must install the original operating system in order to install the upgrade. If you are going from 32 bits to 64 bits that cannot be done with an upgrade - which requires complete and clean installation.
Here is the Microsoft policy on replacement software; http://support.microsoft.com/kb/326246.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.
I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?
Post proposed by the facilitator for the appropriate forum placed
Hi Michael,
We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).
Let us know how it goes.
Kind regards.
-
Original title: Free windows 10 contradictory info update
Decided to do the upgrade. Clicks on the icon of upgrade and immediately got the screen that says my PC is not compatible and cannot be upgraded. Clicked on the icon report to the right of the dialog box as well as report says that all control OK and I'm allowed to be upgraded. What is correct, the first screen or report? How can I determine which is expressly not compatible?
Try to upgrade manually:
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
Also check:
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
then
-
Device drivers for a Win 7 install on Ubuntu system
Hello
I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed. I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not... So, how do you get drivers for Windows can install (or y at - it another way to work around it)?
Thank you!
The bios on fail safe defaults options are?
It will probably take the raid driver
Maybe you are looking for
-
iCal open the alert file does not
I have installed 10.11.3. iCal Prefs are set correctly according to the suggestions of Apple. However, if I set an alert to open the file in the section 'Custiom', the alert does not open the file or reacts in any way in time. What's most frustrating
-
status of the computer to run LabVIEW 8.6 remote façade
Hello Is there any specific computer to run LabVIEW 8.6 remote panel? It's same as LabVIEW 8.6 run? Or I just need Internet access? how fast the Internet is to ensure the quality of the programming? Any fine version of web brouser? where could I find
-
Amplitude of the Signal after the FFT analysis
I'm currently trying to find the amplitude of a signal after running a FFT analysis. I use this for image analysis MTF. I take the profile of the line of fire (with an alternation of black and white bars) and convert it to a signal. This signal is th
-
Printer problem - cannot clear the error and printing
When you try to print something I have on a website, I get an error that tells me to select a printer before I can print. My printer is shown but the error will not clear and I can't print. Everything goes well with the printer, works fine on every
-
All of a sudden my mouse does not work. I tried to do what he says to do to another person, but he has not shown in Device Manager, device usb in the list