Is a block level copy when expand us the size of the disc during P2V?

Similar Questions

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• CS5 installed on the laptop.  A new iMac, but when I insert the disc, nothing happens

  I thought you are supposed to be able to install on laptops and desktop.  Nothing happens when I insert the disc.  ??

  Sorry guys.  I'll put up a new iMac.  My discs program icons appeared not on the desktop.  I just had to go to the preferences in the Finder and select the check boxes of the icons on my desktop.  Only ever got to understand this.  I feel so dumb!  Thanks for trying to help me.

• measure to the block-level disk data-delta for the calculation of the replication bandwidth

  Hi community

  I hope this question isn't too stupid, or maybe I'm thinking too complicated.

  I want to measure the level of the disc data-delta time block time B to calculate the bandwidth for replication.

  How can you experts out there, such a calculation. is my common sense approach?

  Please share some light on this particular subject.

  Thank you, peter

  If you PM me I have a worksheet that may be useful

• Try to burn the DVD when getting message the disc is not recordable

  When you try to burn the DVD we continue to receive the message that the disc is not recordable.  Please insert a recordable or rewritable disc.  We tried the following blank dics, the DVD-R DVD + R DVD - rw and DVD + rw.  Any suggestions?

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Also I have seen reports that the use of a technology mobile broadband
  device such as a USB Dongle can cause problems...

  See the following link:

  Dongle Internet cache burner
  http://www.windowsdvdmaker.com/forums/thread/1905.aspx

• We have a version of Adobe Photoshop Elements 8, we have tried to install on our PC (Windows 10) but nothing seems to happen when you insert the disc.

  We have a version of Adobe Photoshop Elements 8, we have tried to install on our PC (Windows 10) but nothing seems to happen when the disc is inserted

  PSE8 is a pretty old software that date from before W10. But you can try installing from the Adobe download link:

  Download Photoshop Elements versions 9, 8, 7

• DVD-R/CD burner drive is not allowing me to copy all files on the disc it says "" problem copying '.

  I have a Dvd-R/CD player David encoder and I uninstalled Roxio because it allows me to copy onto a Dvd - r. But now windows won't allow me not to one, it gives just this error message:

  «Problem copy»

  Windows encountered a problem when trying to copy this folder.
  What do you want Windows to do? "

  I think it might have something to do with the fact that I had there before only on cd player, but I don't know because windows does show that it is a Dvd Player when a dvd is in.

  Hi SanithDemil,

  ·         What it shows as in Windows Explorer?

  Method 1: Run the next Fixit tool to check the issue.

  Your CD or DVD drive cannot read or write media

  Method 2:

  Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

• Display does not turn off when attached to the ear during a call

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  JBS - GUY says:

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  The proximity sensor and ambient light sensor are two different things. The fact that your ambient light sensor works you says nothing about the functioning of your proximity sensor.

  You get a deal on the phone? A screen protector? If so, remove them and test again. If the screen does not always dark, you may have a hardware problem.

• When I insert the disc, it calls for Windows Live messenger. I can get the download for this page, but it will not download.

  I have a package of Microsoft Life Chat LX 3000. The startup disk name for Windows Live Messenger. I can find the place of origin of this package, but when I press download, that nothing happens

  Hello
   
  For the different Forums for Windows Live Applications, select the link below
   
  Welcome to Windows Live Solution Center
  http://windowslivehelp.com/

• Error Msg When you insert the disc to the software for a printer

  I get the same error msg when trying to install a lexmar x 2670.  «E: / is not a valid Win 32 application.» Last week, I tried to install a new HP printer and kept getting "%1 is not a valid Win 32 application."  How can I fix it?

  Hi BarbWat,

  Which version of windows vista you are running on the computer? What type of system (32-bit or 64-bit)?

  This problem may be caused by one of the options below.

  1. the package is corrupt, missing, or bad.

  2. the software is not designed for your version of Windows.

  I suggest you try the following steps:

  Step 1: The Setup file may be damaged or missing, check that the CD is clean.

  Step 2: If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  You can manually download the Lexmark software, please click here

  Make sure you download the correct version (32-bit or 64-bit) for your computer.

  If the problem persists, you can check with Lexmark.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  To check if your computer is 32-bit or 64-bit, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  You can follow the same steps to solve the problem of HP printer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the product ID of Windows 7, when you put the disc in the other PC

  I PC_1 with an SSD and a valid license of Windows 7 OEM (HP).  I want to put this SSD in a new, more powerful PC_2.  PC_2 holds a valid license of Windows 7 OEM (Packard Bell).

  My thoughts are:

  1 use Double driver to make a backup of all the PC_2 drivers.  Use ABR Activation Backup and Restore to save the certificate key and activation license for W7 on PC_2

  2 put the SSD in PC_2 and change the license key and activation of the certificate (it has the PC_1 keys/certificates) to the PC_2 keys/certificates

  3. install missing drivers to disk backup Double.

  The problem is How to change the key/certificate in step 2?

  Of course I could rebuild W7 on the SSD and give him the key to license PC_2 for the reconstruction, but that would mean reinstall all my other programs that I prefer not to do so.  I downloaded and still have, a copy of W7 iso website digitalrivers if this can help.

  Thank you

  Put the SSD from PC 1, PC 2 and startup, update drivers, and change it to the product key located on the certificate of authenticity.

  As long as they are running the same edition should not be a problem.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• my pc will not boot up when I run the disc to recover its says cannot find hard drive

  my pc won't start recovery disc tried tried

  Windows 7 disk but will not work it says can't find hard drive

  Sorry do not know all the details of my pc

  I am not basic pc user

  Thank you

  If you use your PC manufacturers recovery disks and don't see "no hard disk" the chances are that the hard drive has failed.

  When you try to boot your PC normally what exactly is the error message?

• Copy everything or just the discs?

  I have a stand-alone ESX 3.5 host.

  I'm migrating virtual machines on it on to a farm ESX 4.0 with Virtual Center, etc.

  Transmit enough simple just copy all of the files for each virtual computer and then right click on the file .vmx and "add to the inventory. Then I turn on the virtual machine upgrade VMware tools, close, upgrade equipment, back on the power again.

  However, it is the best way to do it? The 3.5 .vmx file there significant differences in the .vmx 4.0 files?  Is there a reason to copy all the .log files?

  Should I continue to make the outline of the way above? Or do I just copy the files from the disk and then create a new virtual machine, using the existing disk? The second way would be "cleaner"?

  > Simple enough to copy all the files for each virtual computer and then right click on the file .vmx and "add to the inventory. Then I turn on the virtual machine upgrade VMware tools, close, upgrade equipment, back on the power again.

  Do not upgrade the hardware. It is optional.

  > However, is that the best way to do it?

  Add 3.5 ESX to vCenter and simply migrate all virtual machines. You can even VMotion to 4.0 hosts.

  > Should I continue to make the outline of the way above? Or do I just copy the files from the disk and then create a new virtual machine, using the existing disk? The second way would be "cleaner"?

  No, not big difference in format .vmx between 3.5 and 4.0.

  ---

  MCP, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Why PE10 uses the incorrect date format when it creates the files during import?

  Hey,.

  Since I upgraded to 10 EP, I had a problem with the date when the import format.  I have always used the format yyyy-mm-dd when I import my pictures, and this is the format that I choose when I import using Organizer, but it invariably creates files in the format yyyy-mm-dd.  It becomes tedious to rename folders.  Any advice?

  Thank you!

  Hello

  Try the appropriate fix

  Mac: http://kb2.adobe.com/cps/930/cpsid_93...

  Win: http://kb2.adobe.com/cps/930/cpsid_93...

  Brian

• I HAVE INSTALLED THE AIR COMBAT SIMULATOR BUT WHEN I TRY TO RUN IT, IT SAYS INSERT DISC. WHEN I INSERT THE DISC IT USUALLY ALWAYS OPEN

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Jewels38f,

  ·         What happens once you insert the disc (you get no error message)?

  ·         What version of Combat Flight Simulator you try to play?

  ·         What version of Windows is installed on your computer?

  ·         Have you tried the game from the disc itself?

  If you use Windows 7, then follow the suggestions below.

  Visit the link given below to ensure the compatibility of the version of the game.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator

  Do not start the game that is installed on your computer, instead of this insert the disc and let the AutoPlay option to start the game and will give you the opportunity to play.

  Check if this is useful.

  If you are trying to play Combat Flight Simulator 3 you may need to install it even in compatibility mode and check if that helps.

  To install the game in compatibility mode follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Before installing the game in compatibility mode uninstall the game. To uninstall the game, follow the link below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.