Can't paint, "with brush" inside the selection after a STROKE.

Similar Questions

• When I open a new file I can't paint with colors. All the colors I chose change o a shade of gray

  When I open a file empty, that I can't paint with colors as whenever I chose a color happens as gray. Why is this?

  Verify that the new file is in RGB mode: menu/image/mode.

• Can we call a procedure in the select statement?

  Can we call a procedure in the select statement?

  Hello

  Raghu_appsdba wrote:
  Can we call a procedure in the select statement?

  # You can call functions, but not procedures.

  If the procedure does not change the State of the database (for example, it isn't updated all tables), then you can wrap it in a function, or re - write function.

  Here is an example of wrapping.

  CREATE OR REPLACE FUNCTION fun_x (in_txt IN VARCHAR2)
  RETURN  VARCHAR2
  IS
  BEGIN
          proc_y (in_txt);
          RETURN  in_txt
  END     fun_x;
  

• How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  Don't know what your problem is - log on to Skydrive and recover the files that you need them, or download the app to Skydrive and they will all be uploaded at the same time.

• Problems with NAT? Can't access internet from inside the network?

  I was intrigued with this problem for a few days now. I'm stuck on what could be the issue. The problem is that I can ping my router, G0/0 and G0/1, to the internet. However, since the switch and my PC, I can not ping Internet. I'm sure that everything is configured correctly, but here is my setup for the switch and the router:

  Router 1:

  version 15.1 no service button horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! hostname LAN_Router_1 ! boot-start-marker boot-end-marker ! ! enable secret 5 *. ! No aaa new-model ! no location network-clock-participate 3 ! dot11 syslog no ip source route ! IP cef ! ! ! ! domain IP MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 No ipv6 cef ! Authenticated MultiLink bundle-name Panel ! ! ! ! ! voice-card 0 ! ! ! ! ! ! ! Crypto pki token removal timeout default 0 ! ! ! ! license udi pid CISCO3845-MB sn FOC105013BA username * secret privilege 15 5 *. ! redundancy ! ! property intellectual ssh time 60 property intellectual ssh authentication-2 retries property intellectual ssh event logging property intellectual ssh version 2 ! ! ! ! ! ! ! ! interface Loopback0 192.168.254.1 IP 255.255.255.255 ! interface GigabitEthernet0/0 DHCP IP address penetration of the IP stream stream IP output NAT outside IP IP virtual-reassembly in automatic duplex automatic speed media type rj45 ! interface GigabitEthernet0/1 the IP 192.168.0.1 255.255.255.248 penetration of the IP stream stream IP output IP nat inside IP virtual-reassembly in GLBP 100 ip 192.168.0.4 priority GLBP 100 115 GLBP 100 preempt automatic duplex automatic speed media type rj45 ! ospf Router 5 router ID - 192.168.254.1 network 192.168.0.1 0.0.0.0 area 1 192.168.254.1 network 0.0.0.0 area 0 ! IP forward-Protocol ND no ip address of the http server no ip http secure server ! ! IP nat inside source list 10 interface GigabitEthernet0/0 overload IP route 0.0.0.0 0.0.0.0 dhcp ! access-list 10 permit 192.168.94.32 0.0.0.15 connect access-list 10 permit 192.168.17.0 connect 0.0.0.7 access-list 10 permit 192.168.52.0 connect 0.0.0.7

  
  access-list 10 permit 192.168.0.0 0.0.0.7 connect
  access-list 10 deny any newspaper
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !

  profile MGCP default
  !
  !
  !
  !
  !
  connection of the banner ^ C
  W A R N I N G

  THIS IS A PRIVATE COMPUTER SYSTEM.

  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.

  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.

  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.

  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.

  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  Synchronous recording
  local connection
  line to 0
  line vty 0
  local connection
  entry ssh transport
  output transport ssh
  line vty 1 4
  opening of session
  transport of entry all
  !
  Scheduler allocate 20000 1000
  NTP 198.60.73.8 Server
  NTP 13.85.70.43 Server
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Router 2:

  version 15.1 horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! hostname LAN_Router_2 ! boot-start-marker boot-end-marker ! ! ! card order type necessary for slot 1 Monitor logging warnings enable secret 5 *. ! No aaa new-model ! clock timezone CST - 5 0 ! dot11 syslog IP source-route ! IP cef ! ! ! ! domain IP MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 No ipv6 cef ! Authenticated MultiLink bundle-name Panel ! ! ! ! type of parameter-card inspect global Select a dropped packet newspapers ! voice-card 0 ! ! ! ! !

  
  !
  !
  Crypto pki token removal timeout default 0
  !
  !
  !
  !
  license udi pid CISCO3845-MB sn FOC1411592J
  username * secret 5 *.

  !
  redundancy
  !
  !
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  property intellectual ssh event logging
  property intellectual ssh version 2
  !
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  192.168.254.2 the IP 255.255.255.255
  !
  interface GigabitEthernet0/0
  DHCP IP address
  penetration of the IP stream
  stream IP output
  NAT outside IP
  IP virtual-reassembly in
  automatic duplex
  automatic speed
  media type rj45
  !
  interface GigabitEthernet0/1
  IP 192.168.0.2 255.255.255.248
  penetration of the IP stream
  stream IP output
  IP nat inside
  IP virtual-reassembly in
  GLBP 100 ip 192.168.0.4
  priority GLBP 100 110
  automatic duplex
  automatic speed
  media type rj45
  !
  ospf Router 5
  router ID - 192.168.254.2
  network 192.168.0.2 0.0.0.0 area 1
  0.0.0.0 network 192.168.254.2 area 0
  !
  Default IP gateway 192.168.0.1
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  IP nat inside source list 10 interface GigabitEthernet0/0 overload
  IP route 0.0.0.0 0.0.0.0 dhcp
  !
  SSH extended IP access list
  permit tcp host 192.168.52.2 any eq 22 log
  permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
  permit tcp host 192.168.17.18 any eq 22 log
  any eq 22 host tcp 192.168.0.1 newspaper permit
  permit tcp host 192.168.0.2 any eq 22 log
  permit tcp host 192.168.0.3 any eq 22 log
  permit tcp host 192.168.0.5 any eq 22 log
  denyip a session
  !
  access-list 10 permit 192.168.94.32 0.0.0.15 connect
  access-list 10 permit 192.168.17.0 connect 0.0.0.7
  access-list 10 permit 192.168.52.0 connect 0.0.0.7
  access-list 10 permit 192.168.0.0 0.0.0.7 connect
  access-list 10 deny any newspaper
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !
  profile MGCP default
  !
  !
  !
  !
  !
  connection of the banner ^ C
  W A R N I N G

  THIS IS A PRIVATE COMPUTER SYSTEM.

  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.

  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.

  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.

  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.

  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  session-timeout 360
  exec-timeout 360 0
  7 password *.
  Synchronous recording
  local connection
  line to 0
  opening of session
  line vty 0 4
  SSH access class in
  Synchronous recording
  local connection
  entry ssh transport
  output transport ssh
  !
  Scheduler allocate 20000 1000
  NTP 198.60.73.8 Server
  NTP 13.85.70.43 Server
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Switch:

  version 12.2 no service button tcp KeepAlive-component snap-in service a tcp-KeepAlive-quick service horodateurs service debug uptime Log service timestamps uptime encryption password service ! hostname LAN_Switch ! boot-start-marker boot-end-marker ! ! username * secret privilege 15 5 *. ! ! ! No aaa new-model clock timezone CST - 6 1 supply ws-c3750-24ts switch mtu 1500 routing system IP routing IP - domain name MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 ! ! ! ! ! ! ! ! ! spanning tree mode rapid pvst spanning tree logging spanning tree extend id-system ! internal allocation policy of VLAN ascendant ! property intellectual ssh time 60 property intellectual ssh authentication-2 retries property intellectual ssh event logging property intellectual ssh version 2 ! ! interface Loopback0 192.168.254.5 the IP 255.255.255.255 ! interface FastEthernet1/0/1 switchport access vlan 17 switchport mode access spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/2 switchport access vlan 10 switchport mode access spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/3 switchport access vlan 666 switchport mode access Shutdown spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/4 switchport access vlan 666 switchport mode access Shutdown spanning tree portfast spanning tree enable bpduguard

  
  !
  interface FastEthernet1/0/5
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/6
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/7
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/8
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/9
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/10
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/11
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/12
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/13
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/14
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/15
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/16
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/17
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/18
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/19
  Description # PC #.
  switchport access vlan 10
  switchport mode access
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/20
  Description # X_BOX #.
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/21
  switchport access vlan 94
  switchport mode access
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/22
  switchport access vlan 5
  switchport mode access
  !
  interface FastEthernet1/0/23
  switchport access vlan 5
  switchport mode access
  !
  interface FastEthernet1/0/24
  switchport access vlan 5
  switchport mode access
  !
  GigabitEthernet1/0/1 interface
  switchport access vlan 666
  Shutdown
  !
  interface GigabitEthernet1/0/2
  switchport access vlan 666
  Shutdown
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  interface Vlan5
  IP 192.168.0.5 255.255.255.248
  !
  interface Vlan10
  address 192.168.10.2 255.255.255.0
  !
  interface Vlan17
  IP 192.168.17.17 255.255.255.248
  !
  interface Vlan52
  IP 192.168.52.1 255.255.255.248
  !
  interface Vlan94
  IP 192.168.94.33 255.255.255.240
  !
  ospf Router 5
  router ID - 192.168.254.5
  Log-adjacency-changes
  network 192.168.0.5 0.0.0.0 area 1
  network 192.168.10.2 0.0.0.0 area 2
  network 192.168.17.17 0.0.0.0 area 2
  network 192.168.52.1 0.0.0.0 area 2
  network 192.168.94.33 0.0.0.0 area 2
  0.0.0.0 network 192.168.254.5 area 0
  !
  IP classless
  IP route 0.0.0.0 0.0.0.0 192.168.0.4 permanent
  no ip address of the http server
  no ip http secure server
  !
  !
  SSH_IN extended IP access list
  permit tcp host 192.168.52.2 any eq 22 log
  permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
  permit tcp host 192.168.17.18 any eq 22 log
  any eq 22 host tcp 192.168.0.1 newspaper permit
  permit tcp host 192.168.0.2 any eq 22 log
  permit tcp host 192.168.0.3 any eq 22 log
  permit tcp host 192.168.0.5 any eq 22 log
  deny ip any any newspaper
  !
  !
  connection of the banner ^ C
  W A R N I N G
  THIS IS A PRIVATE COMPUTER SYSTEM.
  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.
  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.
  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.
  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.
  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  session-timeout 60
  exec-timeout 60 0
  Synchronous recording
  local connection
  line vty 0
  access-class SSH_IN in
  local connection
  line vty 1 4
  access-class SSH_IN in
  opening of session
  line vty 5 15
  access-class SSH_IN in
  opening of session
  !
  NTP 198.60.73.8 Server
  Event Manager environment suspend_ports_config flash: / susp_ports.dat
  Event Manager environment suspend_ports_days 7
  Event Manager user Directorystrategie "flash: / policies /.
  Event manager session cli username "stw".
  political event manager sl_suspend_ports.tcl
  political event manager tm_suspend_ports.tcl
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Well, I totally forgot the keyword "log" and NAT:

  Cisco IOS NAT support ACLs with a keyword "log"?

  A. When you configure Cisco IOS NAT translation dynamic NAT, an ACL is used to identify the packages that can be translated. The current NAT architecture does not support the ACL with a keyword "log".

  http://www.Cisco.com/c/en/us/support/docs/IP/network-address-translation...

  If your problem is not the mask with joker, but the command "log"...

• How to paint with 'DRAW inside' inside Live Paint/group?

  Hello

  How to draw inside the paint/group Live? I've selected an item in my LIVE PAINT GROUP and I am using the BRUSH/BLOB BRUSH TOOL to paint shadows inside my SELECTION of PAINT DYNAMICS, but DRAW them to the INTERIOR the MODE is disabled?

  

  Why is grayed out? How can I activate the DRAW MODE inside?

  You must first develop the live paint group.

• Problem with brush and tool Selection

  Hi people,

  I recently upgraded to a MacBook Pro and passed my Photoshop preferences on my iMac. Opening to the top of Photoshop on the MacBook, I found that the tools brush and marquee (two tools I use often) did not work properly. While the two Act upward in different ways, it would seem that they are related.

  The question:

  Brush tool: cursor instead of the brush usuall (in my case, the outline of the brush), I have the pipette as if I had pressed Option. I can paint only pressing caps lock, shift, or by clicking several times.

  Selection tool: instead of the beginning of the selection in a corner, it starts in the Center, once more, as if I had pressed Option.

  This has probably been asked before, but I searched and could not find it. I tried to uninstall completely, then by reinstalling PS, nothing helps. It's probably something really simple, but I can't.

  Thank you

  Conor

  Update your Mac OS 10.6.7

  Delete the Adobe Photoshop settings file? Start / tools are acting strangely. (Mac Os 10.6.6 10.6.5)

• How can I default first line below the selected line in the table of the adf

  Hello
  
  I use Jdeveloper 11 g,
  I created Adf quick query with table and changed selectionListener table as #{CustRMMap.onRMGroupNameChange}.
  and when I click on find fast query no row is selected.
  I want the first row to be selected / highlighted by default when I click search.
  
  Patel Imran

  You can also set an attributeValue in pagedef.xml
  bind this attributeValue with column of your table. This sets the value of the selected line to the variable attruibute.
  Will now link this with your desired component attributeValue.
  Put partial trigger on the component that should display this value.
  This will save you to write custom code and use the default table selection listener property, which marks the first default line.

  Apart from this, if you want to govern the first default line of managed bean selection use this code...

  + _Table = selectionEvent.getSource ((richeTableau)) richeTableau; + *
  + / / the model in the Collection is the object that provides the structured data.
  + / / for rendering table +.
  + TableModel CollectionModel = table.getValue ((CollectionModel)); + *
  + / / the ADF object that implements the CollectionModel is JUCtrlHierBinding. IT +.
  + / /is wrapped by the CollectionModel API.
  + JUCtrlHierBinding adfTableBinding = tableModel.getWrappedData ((JUCtrlHierBinding)); + *
  + / / Acess the iterator ADF, binding that is used with the binding table ADF +.
  + DCIteratorBinding tableIteratorBinding = adfTableBinding.getDCIteratorBinding (); + *

  + / / the role of this method is to synchronize the table feature selection +.
  + / / with the selection of the model of the ADF +.
  + Object selectedRowData = table.getSelectedRowData (); + *
  + / / cast of JUCtrlHierNodeBinding, which is the subject of the ADF that is +.
  + / line/a +.
  + JUCtrlHierNodeBinding nodeBinding = selectedRowData (JUCtrlHierNodeBinding); + *
  + / / get the key of the node binding line and set it as the current line in the +.
  + / / iterator +.
  + Key rwKey = nodeBinding.getRowKey (); + *
  tableIteratorBinding.setCurrentRowWithKey (rwKey.toStringFormat (true)); + *

  and another way on the right is a custom like this code:

  + public void setDefaultRow (int count) {/ / call this method your method of selection custom, rom pass the line of the line to select index. count = 0, will select first row + *}

  + try {+ *}
  Object oldRowKey = tblMag.getRowKey (); *
  + try {+ *}
  This.

  .getSelectedRowKeys () .clear ();*
  * +} catch (System.Exception e) {+ *}
  System.out.println (e.getMessage ()); *
  +}+
  This..setRowIndex (count);*
  RKS RowKeySet =. getSelectedRowKeys();*
  (RKS). Add(. getRowKey());*
  RKS =. getSelectedRowKeys();*
  +.setRowKey (oldRowKey); +
  * +} catch (System.Exception e) {+ *}
  System.out.println ("error:" e.getMessage ()); + *
  +}+
  +}+

  Hope this helps

  Concerning
  Maryline Roussel

• Toshiba KIRA-102 with dust inside the screen

  Hello

  Big disapointement! It's my 4th Toshiba (first back in 1997... and still works!)
  My Satellite M30X with 10 years (ok) and my Tecra R840 with 3 years works 24 hours a day from the last August :-)

  The las one... a 102 Kira bought las November!
  Never had this problem: a task of dust about an inch or two the upper of the screen... but inside the screen!

  Now what?
  It's really annoying because it's the perfect... Toshiba advertising ultrabook!

  Paulo

  Hello

  To be honest, I never read on the problems of dust inside the display area.
  However, the mentioned absence looks like hardware related issue with material in question must be reported to the Toshiba authorized service provider in your country.

  In my opinion you should talk to the ASP guys on this problem of dust and probably they will replace the display panel

  On this page you will find all the Toshiba ASP available worldwide:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Test the microphone works, but I can't save with recorder to the computer.

  I tested the microphone under voice identification. He says he works. When I opened the computer of the recorder of the window and click on 'start recording' nothing records. Also in my music software Sonar, the microphone no longer records. I went to 'troubleshooting' and the final message said: "the volume on the unit is low." Not fixed. How to increase volume for a microphone? I understand how to increase or decrease the volume of the speakers via the speaker ikon down in the corner, but you can never asked me to change the microphone volume. How do you do that? (If that's the problem!) Thank you. Operating system is Vista.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try these steps and check:

  a. Click Start, open Control Panel.

  b. click sounds, click the recording tab.

  c. click microphone, and then click Properties.

  d. under the controller information, check if the correct sound card is selected.

  e. click on the advance tab, under exclusive mode uncheck both boxes.

  f. click on apply, then ok.

  Check if it helps.

  Method 2:

  Try to update the latest drivers for the sound card and then check that if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• ListView with TextField inside the component and requestFocus()

  Hello

  I'm trying to implement the logical: when the page with ListView is indicated - start editing (see the keyboard) in the field of specific text that is part of the agenda of the ListView.

  TextField.requestFocus () works very well if it is called some time later, after loading the page (assuming that when ListView load model and created the UI elements).

  How to identify when requestFocus() is success? onCreationCompleted for TextField/ListView does not work.

  It can be done with QTimer but I want to keep it as a backup plan.

  Thank you

  Can you try to add to your Page (or your ListView):
  attachedObjects:]
  {RenderFence}
  raised: true
  onReached: textFieldName.requestFocus)
  }
  ]

• I have a toshiba laptop (4 GB ram) with Win 7 64 bit. Can I format with 32-bit win7 and after that the 32-bit system reads all the 4 GB of ram?

  I have a toshiba laptop (4 GB ram) with win7 64-bit can I format all the 4 GB of ram with 32 bit win7, and after that can read 32 bit system?

  [Moved from comments]

  Original title: decommissioning

  W

  64-bit can but 32 bit can only use concerts of ~ 3.25.  Why would you want to change (which would require a complete reinstallation including all apps) 32-bit?

• can't make reactive image inside the div class or id!

  < img class = "reactive" src = "robots.jpg" > "

  the CSS for resoponsive is:

  {img. Responsive}

  Max-width: 100%;

  height: auto;

  }

  Yes. It works very well, but he doesn't work inside the div class

  < div class = "hhh" >

  < img class = "reactive" src = "robots.jpg" > "

  the css of the file for resoponsive is:
  

  {img. Responsive}

  Max-width: 100%;

  height: auto;

  }

  < / div >

  It does not work. any way to make it work?

  Right.  That is my answer and I stick to it.

  Here is an example online to work with image inside a

  .

  The editor tryit v2.5

  Nancy O.

• Limited to what can be edited with editing in the browser

  Is there a way to restrict certain elements of the page being changed with editing in the browser?

  For example, my client has a coffee shop and need to update their daily lives of daily promotions. I do not want to make changes in other areas of the site for fear that they may "goof things upwards" (for lack of better term).

  Is it possible for me to only do the dishes of the day can be changed?

  I appreciate all the comments.

  The site is hosted on Business Catalyst? If yes then you can create roles and assign access permissions that will limit their access to the pages or modules added to the end of BC.

  Muse has created text or images can be changed by site admin users, only if the content are created through the end of BC as photo gallery or Articles etc. can be managed with a restricted access.

  Thank you

  Sanjit

• Why I can't work with screenshot of the iPad?

  How is it that I can not use screenshots made with my iPad?

  I can open them and modyfi in the program but when I want to save or export I just get the messege that they are not compatible...

  Please check that your device has enough free storage on the left.

  Thank you!